Add support for SMSC LAN8720 PHY

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3510 42af7a65-404d-4744-a932-0658087f49c3

5 files changed, 154 insertions, 10 deletions

diff --git a/nuttx/arch/arm/src/lpc17xx/lpc17_ethernet.c b/nuttx/arch/arm/src/lpc17xx/lpc17_ethernet.c
index 5662ec7c7..3efa3df03 100644
--- a/nuttx/arch/arm/src/lpc17xx/lpc17_ethernet.c
+++ b/nuttx/arch/arm/src/lpc17xx/lpc17_ethernet.c
@@ -159,11 +159,21 @@
 /* PHYs *********************************************************************/
 /* Select PHY-specific values.  Add more PHYs as needed. */
 
-#ifdef CONFIG_PHY_KS8721
+#if defined(CONFIG_PHY_KS8721)
 #  define LPC17_PHYNAME      "KS8721"
 #  define LPC17_PHYID1       MII_PHYID1_KS8721
 #  define LPC17_PHYID2       MII_PHYID2_KS8721
 #  define LPC17_HAVE_PHY     1
+#elif defined(CONFIG_PHY_DP83848C)
+#  define LPC17_PHYNAME      "DP83848C"
+#  define LPC17_PHYID1       MII_PHYID1_DP83848C
+#  define LPC17_PHYID2       MII_PHYID2_DP83848C
+#  define LPC17_HAVE_PHY     1
+#elif defined(CONFIG_PHY_LAN8720)
+#  define LPC17_PHYNAME      "LAN8720"
+#  define LPC17_PHYID1       MII_PHYID1_LAN8720
+#  define LPC17_PHYID2       MII_PHYID2_LAN8720
+#  define LPC17_HAVE_PHY     1
 #else
 #  warning "No PHY specified!"
 #  undef LPC17_HAVE_PHY
@@ -1763,8 +1773,7 @@ static inline int lpc17_phyautoneg(uint8_t phyaddr)
       /* Check if auto-negotiation has completed */
 
       phyreg = lpc17_phyread(phyaddr, MII_MSR);
-      if ((phyreg & (MII_MSR_LINKSTATUS | MII_MSR_ANEGCOMPLETE)) == 
-          (MII_MSR_LINKSTATUS | MII_MSR_ANEGCOMPLETE))
+      if ((phyreg & MII_MSR_ANEGCOMPLETE) != 0)
         {
           /* Yes.. return success */
 
@@ -1832,13 +1841,23 @@ static int lpc17_phymode(uint8_t phyaddr, uint8_t mode)
 
   for (timeout = MII_BIG_TIMEOUT; timeout > 0; timeout--)
     {
+#ifdef CONFIG_PHY_DP83848C
+      phyreg = lpc17_phyread(phyaddr, MII_DP83848C_STS);
+      if ((phyreg & 0x0001) != 0)
+        {
+          /* Yes.. return success */
+
+          return OK;
+        }
+#else
       phyreg = lpc17_phyread(phyaddr, MII_MSR);
-      if (phyreg & MII_MSR_LINKSTATUS)
+      if ((phyreg & MII_MSR_LINKSTATUS) != 0)
         {
           /* Yes.. return success */
 
           return OK;
         }
+#endif
     }
 
   ndbg("Link failed. MSR: %04x\n", phyreg);
@@ -1895,16 +1914,19 @@ static inline int lpc17_phyinit(struct lpc17_driver_s *priv)
         */
 
        phyreg = (unsigned int)lpc17_phyread(phyaddr, MII_PHYID1);
+       nvdbg("Addr: %d PHY ID1: %04x\n", phyaddr, phyreg);
+
        if (phyreg == LPC17_PHYID1)
         {
           phyreg = lpc17_phyread(phyaddr, MII_PHYID2);
+          nvdbg("Addr: %d PHY ID2: %04x\n", phyaddr, phyreg);
+
           if (phyreg  == LPC17_PHYID2)
             {
               break;
             }
         }
     }
-  nvdbg("phyaddr: %d\n", phyaddr);
 
   /* Check if the PHY device address was found */
 
@@ -1912,8 +1934,10 @@ static inline int lpc17_phyinit(struct lpc17_driver_s *priv)
     {
       /* Failed to find PHY at any location */
 
+      ndbg("No PHY detected\n");
       return -ENODEV;
     }
+  nvdbg("phyaddr: %d\n", phyaddr);
 
   /* Save the discovered PHY device address */
 
@@ -1973,7 +1997,7 @@ static inline int lpc17_phyinit(struct lpc17_driver_s *priv)
 
   /* Check configuration */
 
-#ifdef CONFIG_PHY_KS8721
+#if defined(CONFIG_PHY_KS8721)
   phyreg = lpc17_phyread(phyaddr, MII_KS8721_10BTCR);
 
   switch (phyreg & KS8721_10BTCR_MODE_MASK)
@@ -1993,9 +2017,78 @@ static inline int lpc17_phyinit(struct lpc17_driver_s *priv)
         priv->lp_mode = LPC17_100BASET_FD;
         break;
       default:
-        dbg("Unrecognized mode: %04x\n", phyreg);
+        ndbg("Unrecognized mode: %04x\n", phyreg);
         return -ENODEV;
     }
+#elif defined(CONFIG_PHY_DP83848C)
+  phyreg = lpc17_phyread(phyaddr, MII_DP83848C_STS);
+
+  /* Configure for full/half duplex mode and speed */
+
+  switch (phyreg & 0x0006)
+    {
+      case 0x0000:
+        priv->lp_mode = LPC17_100BASET_HD;
+        break;
+      case 0x0002:
+        priv->lp_mode = LPC17_10BASET_HD;
+        break;
+      case 0x0004:
+        priv->lp_mode = LPC17_100BASET_FD;
+        break;
+      case 0x0006:
+        priv->lp_mode = LPC17_10BASET_FD;
+        break;
+      default:
+        ndbg("Unrecognized mode: %04x\n", phyreg);
+        return -ENODEV;
+    }
+#elif defined(CONFIG_PHY_LAN8720)
+  {
+    uint16_t advertise;
+    uint16_t lpa;
+
+    up_udelay(500);
+    advertise = lpc17_phyread(phyaddr, MII_ADVERTISE);
+    lpa       = lpc17_phyread(phyaddr, MII_LPA);
+
+    /* Check for 100BASETX full duplex */
+
+    if ((advertise & MII_ADVERTISE_100BASETXFULL) != 0 &&
+        (lpa & MII_LPA_100BASETXFULL) != 0)
+      {
+        priv->lp_mode = LPC17_100BASET_FD;
+      }
+
+    /* Check for 100BASETX half duplex */
+
+    else if ((advertise & MII_ADVERTISE_100BASETXHALF) != 0 &&
+        (lpa & MII_LPA_100BASETXHALF) != 0)
+      {
+        priv->lp_mode = LPC17_100BASET_HD;
+      }
+
+    /* Check for 10BASETX full duplex */
+
+    else if ((advertise & MII_ADVERTISE_10BASETXFULL) != 0 &&
+        (lpa & MII_LPA_10BASETXFULL) != 0)
+      {
+        priv->lp_mode = LPC17_10BASET_FD;
+      }
+
+    /* Check for 10BASETX half duplex */
+
+    else if ((advertise & MII_ADVERTISE_10BASETXHALF) != 0 &&
+        (lpa & MII_LPA_10BASETXHALF) != 0)
+      {
+        priv->lp_mode = LPC17_10BASET_HD;
+      }
+    else
+      {
+        ndbg("Unrecognized mode: %04x\n", phyreg);
+        return -ENODEV;
+      }
+  }
 #else
 #  warning "PHY Unknown: speed and duplex are bogus"
 #endif
diff --git a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig
index 10aa9e5f2..3b71b7172 100755
--- a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig
+++ b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig
@@ -188,6 +188,8 @@ CONFIG_UART3_2STOP=0
 # LPC17xx specific PHY/Ethernet device driver settings
 #
 # CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_DP83848C - Selects National Semiconductor DP83848C PHY
+# CONFIG_PHY_LAN8720 - Selects SMSC LAN8720 PHY
 # CONFIG_PHY_AUTONEG - Enable auto-negotion
 # CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
 # CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
@@ -205,7 +207,9 @@ CONFIG_UART3_2STOP=0
 # CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
 #   Automatically set if CONFIG_NET_IGMP is selected.
 #
-CONFIG_PHY_KS8721=y
+CONFIG_PHY_KS8721=n
+CONFIG_PHY_DP83848C=n
+CONFIG_PHY_LAN8720=y
 CONFIG_PHY_AUTONEG=y
 CONFIG_PHY_SPEED100=n
 CONFIG_PHY_FDUPLEX=y
diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig
index 0e32576eb..770252766 100755
--- a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig
+++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig
@@ -188,6 +188,8 @@ CONFIG_UART3_2STOP=0
 # LPC17xx specific PHY/Ethernet device driver settings
 #
 # CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_DP83848C - Selects National Semiconductor DP83848C PHY
+# CONFIG_PHY_LAN8720 - Selects SMSC LAN8720 PHY
 # CONFIG_PHY_AUTONEG - Enable auto-negotion
 # CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
 # CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
@@ -203,7 +205,9 @@ CONFIG_UART3_2STOP=0
 # CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
 #   Automatically set if CONFIG_NET_IGMP is selected.
 #
-CONFIG_PHY_KS8721=y
+CONFIG_PHY_KS8721=n
+CONFIG_PHY_DP83848C=n
+CONFIG_PHY_LAN8720=y
 CONFIG_PHY_AUTONEG=y
 CONFIG_PHY_SPEED100=n
 CONFIG_PHY_FDUPLEX=y
diff --git a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig
index abb4f6761..79f59228f 100755
--- a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig
+++ b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig
@@ -188,6 +188,8 @@ CONFIG_UART3_2STOP=0
 # LPC17xx specific PHY/Ethernet device driver settings
 #
 # CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_DP83848C - Selects National Semiconductor DP83848C PHY
+# CONFIG_PHY_LAN8720 - Selects SMSC LAN8720 PHY
 # CONFIG_PHY_AUTONEG - Enable auto-negotion
 # CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
 # CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
@@ -203,7 +205,9 @@ CONFIG_UART3_2STOP=0
 # CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
 #   Automatically set if CONFIG_NET_IGMP is selected.
 #
-CONFIG_PHY_KS8721=y
+CONFIG_PHY_KS8721=n
+CONFIG_PHY_DP83848C=n
+CONFIG_PHY_LAN8720=y
 CONFIG_PHY_AUTONEG=y
 CONFIG_PHY_SPEED100=n
 CONFIG_PHY_FDUPLEX=y
diff --git a/nuttx/include/nuttx/mii.h b/nuttx/include/nuttx/mii.h
index 5b82ac600..ea63b154b 100644
--- a/nuttx/include/nuttx/mii.h
+++ b/nuttx/include/nuttx/mii.h
@@ -110,6 +110,33 @@
 #define MII_KS8721_INTCS             0x1b      /* Interrupt control/status register */
 #define MII_KS8721_10BTCR            0x1f      /* 10BASE-TX PHY control register */
 
+/* National Semiconductor DP83848C PHY Extended Registers */
+
+#define MII_DP83848C_STS             0x10      /* Status Register */
+#define MII_DP83848C_MICR            0x11      /* MII Interrupt Control Register */
+#define MII_DP83848C_MISR            0x12      /* MII Interrupt Status Register */
+#define MII_DP83848C_FCSCR           0x14      /* False Carrier Sense Counter */
+#define MII_DP83848C_RECR            0x15      /* Receive Error Counter */
+#define MII_DP83848C_PCSR            0x16      /* PCS Sublayer Config. and Status */
+#define MII_DP83848C_RBR             0x17      /* RMII and Bypass Register */
+#define MII_DP83848C_LEDCR           0x18      /* LED Direct Control Register */
+#define MII_DP83848C_PHYCR           0x19      /* PHY Control Register */
+#define MII_DP83848C_10BTSCR         0x1a      /* 10Base-T Status/Control Register */
+#define MII_DP83848C_CDCTRL1         0x1b      /* CD Test Control and BIST Extens */
+#define MII_DP83848C_EDCR            0x1d      /* Energy Detect Control Register */
+
+/* SMSC LAN8720 PHY Extended Registers */
+
+#define MII_LAN8720_REV              0x10      /* Silicon Revision Register */
+#define MII_LAN8720_MCSR             0x11      /* Mode Control/Status Register */
+#define MII_LAN8720_MODES            0x12      /* Special modes */
+#define MII_LAN8720_SECR             0x1a      /* Symbol Error Counter Register */
+#define MII_LAN8720_CSIR             0x1b      /* Control / Status Indicator Register */
+#define MII_LAN8720_SITC             0x1c      /* Special Internal Testability Controls */
+#define MII_LAN8720_ISR              0x1d      /* Interrupt Source Register */
+#define MII_LAN8720_IMR              0x1e      /* Interrupt Mask Register */
+#define MII_LAN8720_SCSR             0x1f      /* PHY Special Control/Status Register */
+
 /* GMII */
 
 #define GMII_MCR                     MII_MCR         /* GMII management control */
@@ -241,6 +268,18 @@
 #define DP83840_PHYADDR_DUPLEX       (1 << 7)
 #define DP83840_PHYADDR_SPEED        (1 << 6)
 
+/* National Semiconductor DP83848C ******************************************/
+/* DP83848C MII ID1/2 register bits */
+
+#define MII_PHYID1_DP83848C          0x2000    /* ID1 value for DP83848C */
+#define MII_PHYID2_DP83848C          0x5c90    /* ID2 value for DP83848C */
+
+/* SMSC LAN8720 *************************************************************/
+/* SMSC LAN8720 MII ID1/2 register bits */
+
+#define MII_PHYID1_LAN8720           0x0007    /* ID1 value for LAN8720 */
+#define MII_PHYID2_LAN8720           0xc0f1    /* ID2 value for LAN8720 */
+
 /* Am79c874-specific register bit settings **********************************/
 /* Am79c874 MII ID1/2 register bits */