diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-06-27 00:03:05 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-06-27 00:03:05 +0000 |
commit | c455dee2b9bf6a37956071f5b9a16f786ccc0f0a (patch) | |
tree | 38da3785a4f263bd47dadc31dcd5016866bf81d4 | |
parent | d07a361adc938b7c8f671d91da4300b8c4a5df7a (diff) | |
download | nuttx-c455dee2b9bf6a37956071f5b9a16f786ccc0f0a.tar.gz nuttx-c455dee2b9bf6a37956071f5b9a16f786ccc0f0a.tar.bz2 nuttx-c455dee2b9bf6a37956071f5b9a16f786ccc0f0a.zip |
Mirtoo README.txt and SST25 comments update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4874 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | nuttx/configs/mirtoo/README.txt | 28 | ||||
-rw-r--r-- | nuttx/drivers/mtd/sst25.c | 6 |
2 files changed, 23 insertions, 11 deletions
diff --git a/nuttx/configs/mirtoo/README.txt b/nuttx/configs/mirtoo/README.txt index a2f8296a2..5e7dec6a3 100644 --- a/nuttx/configs/mirtoo/README.txt +++ b/nuttx/configs/mirtoo/README.txt @@ -821,13 +821,14 @@ Where <subdir> is one of the following: nxffs: This is a configuration very similar to the nsh configuration. This - configure also provides the NuttShell (NSH). This configuration use + configure also provides the NuttShell (NSH). And this configuration use UART1 which is available on FUNC 4 and 5 on connector X3 (as described - for the nsh configuration). This configuration differs in the fillowing - ways: + for the nsh configuration). This configuration differs from the nsh + configuration in the following ways: 1) SPI2 is enabled and support is included for the NXFFS file system - on the 32Mbi SST25 device on the Mirtoo board. + on the 32Mbit SST25 device on the Mirtoo board. NXFFS is the NuttX + wear-leveling file system. CONFIG_PIC32MX_SPI2=y CONFIG_MTD_SST25=y @@ -866,12 +867,15 @@ Where <subdir> is one of the following: CONFIG_NSH_DISABLE_TEST=y CONFIG_NSH_DISABLE_WGET=y + When the system boots, you should have the NXFFS file system mounted + at /mnt/sst25. + NOTES: (1) It takes many seconds to boot the sytem using the NXFFS file system because the entire FLASH must be verified on power up - (a probably several minutes the first time that NXFFS comes up and - had to format the file system). (2) FAT does not have these delays - and this configuration can be modified to use the (larger) FAT file - system as described below: + (and many *minutes* the first time that NXFFS comes up and has to + format the file system). (2) FAT does not have these delays and this + configuration can be modified to use the (larger) FAT file system as + described below: fat: There is no FAT configuration, but the nxffx configuration can be used @@ -881,3 +885,11 @@ Where <subdir> is one of the following: CONFIG_FS_NXFFS=n CONFIG_FS_FAT=y CONFIG_NSH_DISABLE_MKFATFS=n + + In this configuration, the FAT file system will not be automatically + monounted. When NuttX boots to the NSH prompt, you will find the + SST5 block driver at /dev/mtdblock0. This can be formatted with a + FAT file system and mounted with these commands: + + nsh> mkfatfs /dev/mtdblock0 + nsh> mount -t vfat /dev/mtdblock0 /mnt/sst25 diff --git a/nuttx/drivers/mtd/sst25.c b/nuttx/drivers/mtd/sst25.c index 81b5dc1bf..83fbdc347 100644 --- a/nuttx/drivers/mtd/sst25.c +++ b/nuttx/drivers/mtd/sst25.c @@ -60,9 +60,9 @@ * Pre-processor Definitions ************************************************************************************/ /* Configuration ********************************************************************/ -/* Per the data sheet, the SST25 parts can be driven with either SPI mode 0 (CPOL=0 and - * CPHA=0) or mode 3 (CPOL=1 and CPHA=1). But I have heard that other devices can - * operated in mode 0 or 1. So you may need to specify CONFIG_SST25_SPIMODE to +/* Per the data sheet, the SST25 parts can be driven with either SPI mode 0 (CPOL=0 + * and CPHA=0) or mode 3 (CPOL=1 and CPHA=1). But I have heard that other devices + * can operate in mode 0 or 1. So you may need to specify CONFIG_SST25_SPIMODE to * select the best mode for your device. If CONFIG_SST25_SPIMODE is not defined, * mode 0 will be used. */ |