Kconfig update

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4927 42af7a65-404d-4744-a932-0658087f49c3

3 files changed, 563 insertions, 22 deletions

diff --git a/nuttx/arch/arm/Kconfig b/nuttx/arch/arm/Kconfig
index a88af0e5f..40dcb1105 100644
--- a/nuttx/arch/arm/Kconfig
+++ b/nuttx/arch/arm/Kconfig
@@ -113,6 +113,7 @@ config ARCH_CHIP
 	default "lpc214x"	if ARCH_CHIP_LPC214X
 	default "lpc2378"	if ARCH_CHIP_LPC2378
 	default "lpc31xx"	if ARCH_CHIP_LPC31XX
+	default "lpc43xx"	if ARCH_CHIP_LPC43XX
 	default "sam3u"		if ARCH_CHIP_SAM3U
 	default "stm32"		if ARCH_CHIP_STM32
 	default "str71x"	if ARCH_CHIP_STR71X
@@ -159,19 +160,47 @@ config ARCH_CALIBRATION
 		watch to measure the 100 second delay then adjust ARCH_LOOPSPERMSEC until
 		the delay actually is 100 seconds.
 
+if ARCH_CHIP_C5471
 source arch/arm/src/c5471/Kconfig
+endif
+if ARCH_CHIP_CALYPSO
 source arch/arm/src/calypso/Kconfig
+endif
+if ARCH_CHIP_DM320
 source arch/arm/src/dm320/Kconfig
+endif
+if ARCH_CHIP_IMX
 source arch/arm/src/imx/Kconfig
+endif
+if ARCH_CHIP_KINETIS
 source arch/arm/src/kinetis/Kconfig
+endif
+if ARCH_CHIP_LM3S
 source arch/arm/src/lm3s/Kconfig
+endif
+if ARCH_CHIP_LPC17XX
 source arch/arm/src/lpc17xx/Kconfig
+endif
+if ARCH_CHIP_LPC214X
 source arch/arm/src/lpc214x/Kconfig
+endif
+if ARCH_CHIP_LPC2378
 source arch/arm/src/lpc2378/Kconfig
+endif
+if ARCH_CHIP_LPC31XX
 source arch/arm/src/lpc31xx/Kconfig
+endif
+if ARCH_CHIP_LPC43XX
 source arch/arm/src/lpc43xx/Kconfig
+endif
+if ARCH_CHIP_SAM3U
 source arch/arm/src/sam3u/Kconfig
+endif
+if ARCH_CHIP_STM32
 source arch/arm/src/stm32/Kconfig
+endif
+if ARCH_CHIP_STR71X
 source arch/arm/src/str71x/Kconfig
+endif
 
 endif
diff --git a/nuttx/arch/arm/src/lpc43xx/Kconfig b/nuttx/arch/arm/src/lpc43xx/Kconfig
index 5c5a73a8d..706dab8a3 100644
--- a/nuttx/arch/arm/src/lpc43xx/Kconfig
+++ b/nuttx/arch/arm/src/lpc43xx/Kconfig
@@ -9,55 +9,55 @@ choice
 	depends on ARCH_CHIP_LPC43XX
 
 config ARCH_CHIP_LPC4310FBD144
-	bool "LPC4310FBD144
+	bool "LPC4310FBD144"
 
 config ARCH_CHIP_LPC4310FET100
-	bool "LPC4310FET100
+	bool "LPC4310FET100"
 
 config ARCH_CHIP_LPC4320FBD144
-	bool "LPC4320FBD144
+	bool "LPC4320FBD144"
 
 config ARCH_CHIP_LPC4320FET100
-	bool "LPC4320FET100
+	bool "LPC4320FET100"
 
 config ARCH_CHIP_LPC4330FBD144
-	bool "LPC4330FBD144
+	bool "LPC4330FBD144"
 
 config ARCH_CHIP_LPC4330FET100
-	bool "LPC4330FET100
+	bool "LPC4330FET100"
 
 config ARCH_CHIP_LPC4330FET180
-	bool "LPC4330FET180
+	bool "LPC4330FET180"
 
 config ARCH_CHIP_LPC4330FET256
-	bool "LPC4330FET256
+	bool "LPC4330FET256"
 
 config ARCH_CHIP_LPC4350FBD208
-	bool "LPC4350FBD208
+	bool "LPC4350FBD208"
 
 config ARCH_CHIP_LPC4350FET180
-	bool "LPC4350FET180
+	bool "LPC4350FET180"
 
 config ARCH_CHIP_LPC4350FET256
-	bool "LPC4350FET256
+	bool "LPC4350FET256"
 
 config ARCH_CHIP_LPC4353FBD208
-	bool "LPC4353FBD208
+	bool "LPC4353FBD208"
 
 config ARCH_CHIP_LPC4353FET180
-	bool "LPC4353FET180
+	bool "LPC4353FET180"
 
 config ARCH_CHIP_LPC4353FET256
-	bool "LPC4353FET256
+	bool "LPC4353FET256"
 
 config ARCH_CHIP_LPC4357FET180
-	bool "LPC4357FET180
+	bool "LPC4357FET180"
 
 config ARCH_CHIP_LPC4357FBD208
-	bool "LPC4357FBD208
+	bool "LPC4357FBD208"
 
 config ARCH_CHIP_LPC4357FET256
-	bool "LPC4357FET256
+	bool "LPC4357FET256"
 
 endchoice
 
@@ -93,3 +93,397 @@ config ARCH_CORTEXM4
 	bool
 	default y if ARCH_CHIP_LPC43XX
 
+config ARCH_FPU
+	bool "FPU support"
+	default y
+	depends on ARCH_CORTEXM4
+	---help---
+		Build in support for the ARM Cortex-M4 FPU.
+
+choice
+	prompt "LPC43XX Boot Configuration"
+	default CONFIG_BOOT_SRAM
+	depends on ARCH_CHIP_LPC43XX
+	---help---
+		The startup code needs to know if the code is running from internal FLASH,
+		external FLASH, SPIFI, or SRAM in order to initialize properly.  Note that
+		a boot device is not specified for cases where the code is copied into SRAM;
+		those cases are all covered by BOOT_SRAM.
+
+config BOOT_SRAM
+	bool "Running from SRAM"
+
+config BOOT_SPIFI
+	bool "Running from QuadFLASH"
+
+config BOOT_FLASHA
+	bool "Running in internal FLASHA"
+
+config BOOT_FLASHB
+	bool "Running in internal FLASHA"
+
+config BOOT_CS0FLASH
+	bool "Running in external FLASH CS0"
+
+config BOOT_CS1FLASH
+	bool "Running in external FLASH CS1"
+
+config BOOT_CS2FLASH
+	bool "Running in external FLASH CS2"
+
+config BOOT_CS3FLASH
+	bool "Running in external FLASH CS3"
+
+endchoice
+
+menu "LPC43xx Peripheral Support"
+
+config LPC43_ADC0
+	bool "ADC0"
+	default n
+
+config LPC43_ADC1
+	bool "ADC1"
+	default n
+
+config LPC43_ATIMER
+	bool "Alarm timer"
+	default n
+
+config LPC43_CAN1
+	bool "C_CAN1"
+	default n
+
+config LPC43_CAN2
+	bool "C_CAN1"
+	default n
+
+config LPC43_DAC
+	bool "DAC"
+	default n
+
+config LPC43_EMC
+	bool "External Memory Controller (EMC)"
+	default n
+
+config LPC43_ETHERNET
+	bool "Ethernet"
+	default n
+
+config LPC43_EVNTMNTR
+	bool "Event Monitor"
+	default n
+
+config LPC43_GPDMA
+	bool "GPDMA"
+	default n
+
+config LPC43_I2C0
+	bool "I2C0"
+	default n
+
+config LPC43_I2C1
+	bool "I2C1"
+	default n
+
+config LPC43_I2S0
+	bool "I2S0"
+	default n
+
+config LPC43_I2S1
+	bool "I2S1"
+	default n
+
+config LPC43_LCD
+	bool "LCD"
+	default n
+
+config LPC43_MCPWM
+	bool "Motor Control PWM (MCPWM)"
+	default n
+
+config LPC43_QEI
+	bool "Quadrature Controller Interface (QEI)"
+	default n
+
+config LPC43_RIT
+	bool "Repetitive Interrupt Timer (RIT)"
+	default n
+
+config LPC43_RTC
+	bool "Real Time Clock (RTC)"
+	default n
+
+config LPC43_SCT
+	bool "State Configurable Timer (SCT)"
+	default n
+
+config LPC43_SDMMC
+	bool "SD/MMC"
+	default n
+
+config LPC43_SPI
+	bool "SPI"
+	default n
+
+config LPC43_SPIFI
+	bool "SPI Flash Interface (SPIFI)"
+	default n
+
+config LPC43_SSP0
+	bool "SSP0"
+	default n
+
+config LPC43_SSP1
+	bool "SSP1"
+	default n
+
+config LPC43_TMR0
+	bool "ADC1"
+	default n
+
+config LPC43_TMR1
+	bool "Timer 1"
+	default n
+
+config LPC43_TMR2
+	bool "Timer 2"
+	default n
+
+config LPC43_TMR3
+	bool "Timer 3"
+	default n
+
+config LPC43_USART0
+	bool "USART0"
+	default n
+
+config LPC43_UART1
+	bool "UART1"
+	default n
+
+config LPC43_USART2
+	bool "USART2"
+	default n
+
+config LPC43_USART3
+	bool "USART3"
+	default n
+
+config LPC43_USB0
+	bool "USB0"
+	default n
+
+config LPC43_USB1
+	bool "USB1"
+	default n
+
+config LPC43_USB1_ULPI
+	bool "USB1 with ULPI"
+	default n
+	depends on LPC43_USB1
+
+config LPC43_WWDT
+	bool "Windowing Watchdog Timer (WWDT)"
+	default n
+
+endmenu
+
+menu "USART0 Configuration"
+	depends on LPC43_USART0
+
+config USART0_SERIAL_CONSOLE
+	bool "USART0 serial console"
+	default y
+	---help---
+		Selects the USART0 for the console and ttys0 (default is the USART0).
+
+config USART0_RXBUFSIZE
+	int "USART0 Rx buffer size"
+	default 256
+	---help---
+		Characters are buffered as received.  This specific the size of the receive
+		buffer.
+
+config USART0_TXBUFSIZE
+	int "USART0 Tx buffer size"
+	default 256
+	---help---
+		Characters are buffered before being sent.  This specific the size of the
+		transmit buffer
+
+config USART0_BAUD
+	int "USART0 BAUD"
+	default 11520
+	---help---
+		The configured BAUD of the UART
+
+config USART0_BITS
+	int "USART0 number of bits"
+	default 8
+	---help---
+		The number of bits.  Must be either 7 or 8.
+
+config USART0_PARITY
+	int "USART0 parity"
+	default 0
+	---help---
+		0=no parity, 1=odd parity, 2=even parity
+
+config USART0_2STOP
+	bool "USART0 two stop bits"
+	default n
+	---help---
+		Two stop bits
+
+endmenu
+
+menu "UART1 Configuration"
+	depends on LPC43_UART1
+
+config UART1_SERIAL_CONSOLE
+	bool "UART1 serial console"
+	default y if !LPC43_USART0
+	---help---
+		Selects the UART1 for the console and ttys0 (default is the UART1).
+
+config UART1_RXBUFSIZE
+	int "UART1 Rx buffer size"
+	default 256
+	---help---
+		Characters are buffered as received.  This specific the size of the receive
+		buffer.
+
+config UART1_TXBUFSIZE
+	int "UART1 Tx buffer size"
+	default 256
+	---help---
+		Characters are buffered before being sent.  This specific the size of the
+		transmit buffer
+
+config UART1_BAUD
+	int "UART1 BAUD"
+	default 11520
+	---help---
+		The configured BAUD of the UART
+
+config UART1_BITS
+	int "UART1 number of bits"
+	default 8
+	---help---
+		The number of bits.  Must be either 7 or 8.
+
+config UART1_PARITY
+	int "UART1 parity"
+	default 0
+	---help---
+		0=no parity, 1=odd parity, 2=even parity
+
+config UART1_2STOP
+	bool "UART1 two stop bits"
+	default n
+	---help---
+		Two stop bits
+
+endmenu
+
+menu "USART2 Configuration"
+	depends on LPC43_USART2
+
+config USART2_SERIAL_CONSOLE
+	bool "USART2 serial console"
+	default y if !LPC43_USART0 && !LPC43_UART1
+	---help---
+		Selects the USART2 for the console and ttys0 (default is the USART2).
+
+config USART2_RXBUFSIZE
+	int "USART2 Rx buffer size"
+	default 256
+	---help---
+		Characters are buffered as received.  This specific the size of the receive
+		buffer.
+
+config USART2_TXBUFSIZE
+	int "USART2 Tx buffer size"
+	default 256
+	---help---
+		Characters are buffered before being sent.  This specific the size of the
+		transmit buffer
+
+config USART2_BAUD
+	int "USART2 BAUD"
+	default 11520
+	---help---
+		The configured BAUD of the UART
+
+config USART2_BITS
+	int "USART2 number of bits"
+	default 8
+	---help---
+		The number of bits.  Must be either 7 or 8.
+
+config USART2_PARITY
+	int "USART2 parity"
+	default 0
+	---help---
+		0=no parity, 1=odd parity, 2=even parity
+
+config USART2_2STOP
+	bool "USART2 two stop bits"
+	default n
+	---help---
+		Two stop bits
+
+endmenu
+
+menu "USART3 Configuration"
+	depends on LPC43_USART3
+
+config USART3_SERIAL_CONSOLE
+	bool "USART3 serial console"
+	default y if !LPC43_USART0 && !LPC43_UART1 && !LPC43_USART2
+	---help---
+		Selects the USART3 for the console and ttys0 (default is the USART3).
+
+config USART3_RXBUFSIZE
+	int "USART3 Rx buffer size"
+	default 256
+	---help---
+		Characters are buffered as received.  This specific the size of the receive
+		buffer.
+
+config USART3_TXBUFSIZE
+	int "USART3 Tx buffer size"
+	default 256
+	---help---
+		Characters are buffered before being sent.  This specific the size of the
+		transmit buffer
+
+config USART3_BAUD
+	int "USART3 BAUD"
+	default 11520
+	---help---
+		The configured BAUD of the UART
+
+config USART3_BITS
+	int "USART3 number of bits"
+	default 8
+	---help---
+		The number of bits.  Must be either 7 or 8.
+
+config USART3_PARITY
+	int "USART3 parity"
+	default 0
+	---help---
+		0=no parity, 1=odd parity, 2=even parity
+
+config USART3_2STOP
+	bool "USART3 two stop bits"
+	default n
+	---help---
+		Two stop bits
+
+endmenu
+
+
+
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
index 42d189391..2f6595dbd 100644
--- a/nuttx/configs/Kconfig
+++ b/nuttx/configs/Kconfig
@@ -164,10 +164,10 @@ config ARCH_BOARD_LPCXPRESSO
 		is based on the NXP LPC1768.  The Code Red toolchain is used by default.
 
 config ARCH_BOARD_LPC4330_XPLORER
-	bool "NXP LPCExpresso LPC1768"
+	bool "NXG LPC4330-Xplorer"
 	depends on ARCH_CHIP_LPC4330FET100
 	---help---
-		NXP LPCExpresso LPC4330 Xplorer board.  This board is based on the
+		NXG Technologoies LPC4330 Xplorer board.  This board is based on the
 		LPC4330FET100.  The Code Red toolchain is used by default.
 
 config ARCH_BOARD_M68332EVB
@@ -495,19 +495,22 @@ config ARCH_BOARD
 	default "ea3131"             if ARCH_BOARD_EA3131
 	default "ea3152"             if ARCH_BOARD_EA3152
 	default "eagle100"           if ARCH_BOARD_EAGLE100
+	default "ekk-lm3s9b96"       if ARCH_BOARD_EKK_LM3S9B96
 	default "ez80f0910200kitg"   if ARCH_BOARD_EZ80F910200KITG
 	default "ez80f0910200zco"    if ARCH_BOARD_EZ80F910200ZCO
 	default "hymini-stm32v"      if ARCH_BOARD_HYMINI_STM32V
 	default "kwikstik-k40"       if ARCH_BOARD_KWIKSTIK_K40
+	default "lincoln60"          if ARCH_BOARD_LINCOLN60
 	default "lm3s6432-s2e"       if ARCH_BOARD_LM3S6432S2E
 	default "lm3s6965-ek"        if ARCH_BOARD_LM3S6965EK
 	default "lm3s8962-ek"        if ARCH_BOARD_LM3S8962EK
-	default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
 	default "lpc4330-xplorer"    if ARCH_BOARD_LPC4330_XPLORER
+	default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
 	default "m68322evb"          if ARCH_BOARD_M68332EVB
 	default "mbed"               if ARCH_BOARD_MBED
 	default "mcu123-lpc214x"     if ARCH_BOARD_MCU123
 	default "micropendous3"      if ARCH_BOARD_MICROPENDOUS
+	default "mirtoo"             if ARCH_BOARD_MIRTOO
 	default "mx1ads"             if ARCH_BOARD_MX1ADS
 	default "ne64badge"          if ARCH_BOARD_NE64BADGE
 	default "ntosd-dm320"        if ARCH_BOARD_NTOSD_DM320
@@ -517,8 +520,10 @@ config ARCH_BOARD
 	default "olimex-strp711"     if ARCH_BOARD_OLIMEX_STRP711
 	default "pcblogic-pic32mx"   if ARCH_BOARD_PCBLOGICPIC32MX
 	default "pic32-starterkit"   if ARCH_BOARD_PIC32_STARTERKIT
+	default "pic32mx7mmb"        if ARCH_BOARD_PIC32_PIC32MX7MMB
 	default "pjrc-8051"          if ARCH_BOARD_PJRC_87C52
 	default "qemu-i486"          if ARCH_BOARD_QEMU_I486
+	default "rgmp"               if ARCH_BOARD_RGMP
 	default "sam3u-ek"           if ARCH_BOARD_SAM3UEK
 	default "skp16c26"           if ARCH_BOARD_SKP16C26
 	default "stm3210e-eval"      if ARCH_BOARD_STM3210E_EVAL
@@ -539,58 +544,171 @@ config ARCH_BOARD
 	default "sim"                if ARCH_BOARD_SIM
 	default ""                   if ARCH_BOARD_CUSTOM
 
+if ARCH_BOARD_AMBER
 source "configs/amber/Kconfig"
+endif
+if ARCH_BOARD_AVR32DEV1
 source "configs/avr32dev1/Kconfig"
+endif
+if ARCH_BOARD_C5471EVM
 source "configs/c5471evm/Kconfig"
+endif
+if ARCH_BOARD_COMPALE88
 source "configs/compal_e88/Kconfig"
+endif
+if ARCH_BOARD_COMPALE99
 source "configs/compal_e99/Kconfig"
+endif
+if ARCH_BOARD_DEMOS92S12NEC64
 source "configs/demo9s12ne64/Kconfig"
+endif
+if ARCH_BOARD_EA3131
 source "configs/ea3131/Kconfig"
+endif
+if ARCH_BOARD_EA3152
 source "configs/ea3152/Kconfig"
+endif
+if ARCH_BOARD_EAGLE100
 source "configs/eagle100/Kconfig"
+endif
+if ARCH_BOARD_EKK_LM3S9B96
 source "configs/ekk-lm3s9b96/Kconfig"
+endif
+if ARCH_BOARD_EZ80F910200KITG
 source "configs/ez80f910200kitg/Kconfig"
+endif
+if ARCH_BOARD_EZ80F910200ZCO
 source "configs/ez80f910200zco/Kconfig"
+endif
+if ARCH_BOARD_HYMINI_STM32V
 source "configs/hymini-stm32v/Kconfig"
+endif
+if ARCH_BOARD_KWIKSTIK_K40
 source "configs/kwikstik-k40/Kconfig"
+endif
+if ARCH_BOARD_LINCOLN60
 source "configs/lincoln60/Kconfig"
+endif
+if ARCH_BOARD_LM3S6432S2E
 source "configs/lm3s6432-s2e/Kconfig"
+endif
+if ARCH_BOARD_LM3S6965EK
 source "configs/lm3s6965-ek/Kconfig"
+endif
+if ARCH_BOARD_LM3S8962EK
 source "configs/lm3s8962-ek/Kconfig"
-source "configs/lpcxpresso-lpc1768/Kconfig"
+endif
+if ARCH_BOARD_LPC4330_XPLORER
 source "configs/lpc4330-xplorer/Kconfig"
+endif
+if ARCH_BOARD_LPCXPRESSO
+source "configs/lpcxpresso-lpc1768/Kconfig"
+endif
+if ARCH_BOARD_M68332EVB
 source "configs/m68332evb/Kconfig"
+endif
+if ARCH_BOARD_MBED
 source "configs/mbed/Kconfig"
+endif
+if ARCH_BOARD_MCU123
 source "configs/mcu123-lpc214x/Kconfig"
+endif
+if ARCH_BOARD_MICROPENDOUS
 source "configs/micropendous3/Kconfig"
+endif
+if ARCH_BOARD_MIRTOO
 source "configs/mirtoo/Kconfig"
+endif
+if ARCH_BOARD_MX1ADS
 source "configs/mx1ads/Kconfig"
+endif
+if ARCH_BOARD_NE64BADGE
 source "configs/ne64badge/Kconfig"
+endif
+if ARCH_BOARD_NTOSD_DM320
 source "configs/ntosd-dm320/Kconfig"
+endif
+if ARCH_BOARD_NUCLEUS2G
 source "configs/nucleus2g/Kconfig"
+endif
+if ARCH_BOARD_LPC1766STK
 source "configs/olimex-lpc1766stk/Kconfig"
+endif
+if ARCH_BOARD_OLIMEXLPC2378
 source "configs/olimex-lpc2378/Kconfig"
+endif
+if ARCH_BOARD_OLIMEX_STRP711
 source "configs/olimex-strp711/Kconfig"
+endif
+if ARCH_BOARD_PCBLOGICPIC32MX
 source "configs/pcblogic-pic32mx/Kconfig"
+endif
+if ARCH_BOARD_PIC32_STARTERKIT
 source "configs/pic32-starterkit/Kconfig"
+endif
+if ARCH_BOARD_PIC32_PIC32MX7MMB
 source "configs/pic32mx7mmb/Kconfig"
+endif
+if ARCH_BOARD_PJRC_87C52
 source "configs/pjrc-8051/Kconfig"
+endif
+if ARCH_BOARD_QEMU_I486
 source "configs/qemu-i486/Kconfig"
+endif
+if ARCH_BOARD_RGMP
 source "configs/rgmp/Kconfig"
+endif
+if ARCH_BOARD_SAM3UEK
 source "configs/sam3u-ek/Kconfig"
-source "configs/sim/Kconfig"
+endif
+if ARCH_BOARD_SKP16C26
 source "configs/skp16c26/Kconfig"
+endif
+if ARCH_BOARD_STM3210E_EVAL
 source "configs/stm3210e-eval/Kconfig"
+endif
+if ARCH_BOARD_STM3220G_EVAL
 source "configs/stm3220g-eval/Kconfig"
+endif
+if ARCH_BOARD_STM3240G_EVAL
 source "configs/stm3240g-eval/Kconfig"
+endif
+if ARCH_BOARD_STM32F4_DISCOVERY
 source "configs/stm32f4discovery/Kconfig"
+endif
+if ARCH_BOARD_SUREPIC32MX
 source "configs/sure-pic32mx/Kconfig"
+endif
+if ARCH_BOARD_TEENSY
 source "configs/teensy/Kconfig"
+endif
+if ARCH_BOARD_TWR_K60N512
 source "configs/twr-k60n512/Kconfig"
+endif
+if ARCH_BOARD_UBW32
+source "configs/ubw32/Kconfig"
+endif
+if ARCH_BOARD_US7032EVB1
 source "configs/us7032evb1/Kconfig"
+endif
+if ARCH_BOARD_VSN
 source "configs/vsn/Kconfig"
+endif
+if ARCH_BOARD_XTRS
 source "configs/xtrs/Kconfig"
+endif
+if ARCH_BOARD_Z16F2800100ZCOG
 source "configs/z16f2800100zcog/Kconfig"
+endif
+if ARCH_BOARD_Z80SIM
 source "configs/z80sim/Kconfig"
+endif
+if ARCH_BOARD_Z8ENCORE000ZCO
 source "configs/z8encore000zco/Kconfig"
+endif
+if ARCH_BOARD_Z8F64200100KI
 source "configs/z8f64200100kit/Kconfig"
+endif
+if ARCH_BOARD_SIM
+source "configs/sim/Kconfig"
+endif