Preparation for NuttX-6.33 release (maybe tomorrow)

5 files changed, 341 insertions, 27 deletions

diff --git a/NxWidgets/ChangeLog.txt b/NxWidgets/ChangeLog.txt
index 81504c194..4de525ea4 100644
--- a/NxWidgets/ChangeLog.txt
+++ b/NxWidgets/ChangeLog.txt
@@ -403,14 +403,14 @@
 
 * Kconfig and UnitTests/nxwm:  Add logic to enable saving and recovering
   touchscreen calibration data.  This depends upon having platform-dependent
-  support for storate of configuration data.  Portions suggested by
+  support for storage of configuration data.  Portions suggested by
   Ken Pettit (2013-10-30).
 * NxWM:Calibration:  Saving of calibration data must be performed in
   CCalibration, not in UnitTests/nxwm.  Why?  Because the touchscreen
   calibration could also be initiated from other ways other than through
   the one-time, start-up initialization logic (2013-10-30).
 
-1.11 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
+1.11 2014-01-30 Gregory Nutt <gnutt@nuttx.org>
 
 * NxWidgets/Kconfig and NxWidgets::CNxServer:  Server initialization can
   now be disabled in the configuration (in fact, it is disabled by default).
@@ -424,3 +424,5 @@
   thread.  This is necessary if the kernel mode build is used: In that case,
   the touchscreen must be initialized in kernel space before NxWM is started
   (2013-12-30).
+
+1.12 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
diff --git a/apps/ChangeLog.txt b/apps/ChangeLog.txt
index 7c7b9d4a0..146d0943b 100644
--- a/apps/ChangeLog.txt
+++ b/apps/ChangeLog.txt
@@ -743,7 +743,7 @@
 	* apps/nshlib/nsh_fscmds.c:  Add an option to the mkfatfs command to
 	  specify FAT12, FAT16, or FAT32 (2013-12-5).
 
-6.33 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
+6.33 2014-01-30 Gregory Nutt <gnutt@nuttx.org>
 
 	* apps/nshlib/nsh_mntcmds.c:  Modified the df -h logic to eliminate
 	  truncating numbers in conversion (like 7900 -> 7M).  From Ken
@@ -756,7 +756,7 @@
 	  (2014-1-4).
 	* apps/netutils/dhcpc/Kconfig, resolv/Kconfig, telnetd/Kconfig, and
 	  apps/nshlib/Kconfig:  Refactor some configuration dependencies:  NSH
-	  features should debug on netutil selections; netutil selections
+	  features should depend on netutil selections; netutil selections
 	  should depend on networking selections. (2014-1-9).
 	* apps/nshlib/nsh_command.c:  Separate NSH command handling from NSH
 	  line parsing.  This re-partitioning simplifies the logic and will
@@ -809,3 +809,5 @@
 	* apps/system/vi:  Tiny VI is basically functional.  All commands seem
 	  to work.  There are still some display artifacts and probably several
 	  untested conditions (2014-1-21).
+
+6.34 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
diff --git a/misc/buildroot/ChangeLog b/misc/buildroot/ChangeLog
index 3643672b6..497380d15 100644
--- a/misc/buildroot/ChangeLog
+++ b/misc/buildroot/ChangeLog
@@ -133,7 +133,7 @@ buildroot-1.12 2013-03-15 <gnutt@nuttx.org>
 	  (from Ken Bannister).
 	* Add support for a Cortex-M0 toolchain based on GCC 4.6.3.
 
-buildroot-1.13 2011-xx-xx <gnutt@nuttx.org>
+buildroot-1.13 2011-01-29 <gnutt@nuttx.org>
 
 	* Ubuntu's HOSTCC prints 'gcc-Version 4.6.3' but dependencies.sh expects
 	  'gcc version 4.6.3'.  This changes solves the issue, but should be
@@ -141,3 +141,4 @@ buildroot-1.13 2011-xx-xx <gnutt@nuttx.org>
 	* Add support for Cortex-A5 and Cortex-A8
 	* Bring-in support for GCC 4.8.2 from the "real" buildroot (2013-12-26).
 
+buildroot-1.14 2011-xx-xx <gnutt@nuttx.org>
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index ced68606b..3970e00ff 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -5710,8 +5710,8 @@
 	  the interface in this case (2013-10-5).
 	* net/netdev_router.c and net/uip/uip-arp.c:  When the target IP address
 	  does not lie on the device's networker when we have a routing table,
-	  looking the the correct router IP address to use in the ARP request.
-	  In that case, we want the MAC address of the router, not of the the
+	  looking the correct router IP address to use in the ARP request.
+	  In that case, we want the MAC address of the router, not of the
 	  target endpoint (2013-10-5).
 	* net/netdev_rxnotify.c and others: Use the new signature of rxnotify
 	  caused by the routing table.  From Max Holtzberg (2013-10-6).
@@ -6168,7 +6168,7 @@
 	  the top of the loop not the bottom.  Otherwise, we will do a bogus
 	  transfer with the out-of-range block before we test it (2013-12-05).
 
-6.33 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
+6.33 2014-01-30 Gregory Nutt <gnutt@nuttx.org>
 
 	* arch/arm/include/a1x and src/a1x:  Directory structure to support
 	  the Allwinner A10.  Not much there on the initial check-in
@@ -6208,7 +6208,7 @@
 	  From Ken Pettit (2013-12-12)
 	* arch/arm/src/a1x/chip/a1x_timer.h:  Timer register bit definitions
 	  (incomplete on initial check-in) (2013-12-12).
-	* lbc/time/lib_strftime.c: Need null-termination on the the string
+	* lbc/time/lib_strftime.c: Need null-termination on the string
 	  generated by strftime().  From Max Holtzberg (2013-12-12).
 	* sched/nanosleep.c and include/time.h:  Add nanosleep() (2013-12-12).
 	* libc/unistd/lib_sleep.c and lib_usleep.c.  Move sleep() and
@@ -6241,7 +6241,7 @@
 	* arch/arm/src/armv7-a/arm_head.h:  Fix some errors in the cache
 	  invalidation logic (only seem to matter for Cortex-A8) (21-3-12-19).
 	* Kconfig and all Make.defs files:  Add CONFIG_DEBUG_NOOPT.  Now
-	  you can indepenently enable/disable debug symbols and optimization
+	  you can independently enable/disable debug symbols and optimization
 	  (2013-12-20).
 	* configs/README.txt and Documentation/NuttxPortingGuide.html:
 	  Remove documentation of NuttX configuration variables.  Since
@@ -6261,7 +6261,7 @@
 	* configs/stm3210e-eval/buttons: Converted to use kconfig-frontends
 	  tools (untested) (2013-12-22).
 	* configs/Kconfig, configs/viewtool-stm32f107/include/board-stm32f103vct6.h,
-	  and /board-stm32f107vct6.h:  The viewtools board can now be configured
+	  and /board-stm32f107vct6.h:  The viewtool board can now be configured
 	  to support either the STM32F103VCT6 or the STM32F107VCT6 (2013-12-22).
 	* configs/Kconfig, README.txt, viewtool-stm32f107/highpri, Kconfig,
 	  README.txt, and src/stm32_highpri.c:  This is the initial framework
@@ -6280,7 +6280,7 @@
 	  and the name of the common vector handling logic so that the MCU-
 	  independent logic and work with these (2013-12-23).
 	* configs/viewtool-stm32f107/scripts: Move the RAM vector tables to the
-	  beginning of SRAM.  It seems to require this alignament.  Also, we
+	  beginning of SRAM.  It seems to require this alignment.  Also, we
 	  don't need different scripts for the CMNVECTOR case now that the vector
 	  table has a common name.
 	* arch/arm/src: armv-7/up_exception.S and xxx/xxx_vectors.S where
@@ -6312,14 +6312,14 @@
 	  pin definition that would prevent building USB for the connectivity and
 	  performance lines (2013-12-25).
 	* stm32l15xxx_pinmap.h: Fix a typo in USB pin definitions (2013-12-25).
-	* configs/viewtools-stm32f107:  Fix building of USB for F103 and F107.
+	* configs/viewtool-stm32f107:  Fix building of USB for F103 and F107.
 	  F103 has device only; F107 has OTG FS (2013-12-25).
 	* arch/arm/src/stm32/stm32f10xxx_rcc.c and chip/stm32f10xxx_rcc.h:  Add
 	  clocking support for STM32F107 USB OTG FS (which does not work)
 	  (2013-12-26).
 	* configs/viewtool-stm32f107:  Updates to USB for F103 and USB OTG FS
 	  for F107 (2013-12-16).
-	* arch/arm/src/stm32/chip/stm32f3xxxx_pinmap.h:  Fix pin definitioni names
+	* arch/arm/src/stm32/chip/stm32f3xxxx_pinmap.h:  Fix pin definition names
 	  for SPI2 MOSI and MISO. Noted by Brian Webb (2013-12-27).
 	* graphics/nxmu, nxsu, and nxglib and libc/nx, nxmu, and nxglib:  Massive
 	  reshuffling of files with (hopefully) no logic changes.   This
@@ -6360,7 +6360,7 @@
 	  Thomas Grubler (2014-1-2).
 	* tools/configure.c and mkdeps.c:  Fixes for Windows build issues
 	  from Max Holtzberg (2014-1-4).
-	* configs/olimex-stm32-p107/nsh/Make.defs:  Add native Windoes build
+	* configs/olimex-stm32-p107/nsh/Make.defs:  Add native Windows build
 	  support for the Olimex STM32 P107.  From Max Holtzberg (2014-1-4).
 	* Makefile.win:  Changes for native Windows build: fix creation of
 	  a .version file if one does not exist.  Make sure that the APPDIR
@@ -6431,7 +6431,7 @@
 	* All of Jason Jiang's TCP write buffering logic is checked in.
 	  Unfortunately, it does not yet work (2013-1-14).
 	* configs/px4fmu-v2_upstream:  Configuration for testing simple
-	  configurations on the the PX4FMU v2.  This version is incomplete
+	  configurations on the PX4FMU v2.  This version is incomplete
 	  for the PX4 application and is not a replacement for the version
 	  in the PX4 GIT repository.
 	* fs/fat/fs_fat32.c: A correction to FAT cluster allocation from
@@ -6440,7 +6440,7 @@
 	  then the socket-related write buffering information must copied
 	  with the other cloned socket data (2014-1-14).
 	* net/net_close.c:  If CONFIG_NET_TCP_WRITE_BUFFERS is selected,
-	  then it is necessary to free the write buffere callback structure
+	  then it is necessary to free the write buffer callback structure
 	  when the socket is closed (2014-1-14).
 	* fs/fat/fs_fat32.c:  Fix some root directory logic that was
 	  conditionally done only for FAT 32.  Apparently this needs to
@@ -6450,7 +6450,7 @@
 	  implementations of up_maskack_irq() for all Cortex-M architectures:  Do
 	  not disable and enable the IRQ on each interrupt.  Because (1)
 	  interrupts are already disabled on interrupt entry, (2) this
-	  interferes with controlling the IRQ interrrupt setting from interrupt
+	  interferes with controlling the IRQ interrupt setting from interrupt
 	  handlers, and (3) up_disable_irq() does not work anyway so that this
 	  has never done anything (2014-1-15).
 	* All implementations of up_disable_irq() for all Cortex-M3 and M4
@@ -6461,7 +6461,7 @@
 	  not work; writing a '0' to the ISER register has no effect.  That
 	  means that up_disable_irq() was doing nothing!  It turns out that that
 	  is not really important because up_disable_irq() is not really used
-	  for that purpose.  But some spurions STM32 ADC interrupts have been
+	  for that purpose.  But some spurious STM32 ADC interrupts have been
 	  reported to me and this turned out to be the cause in that case.  My
 	  concern now that up_disable_irq() works is that there may now be
 	  unmasked bugs that leave devices in the disabled state?  Thanks to
@@ -6478,7 +6478,7 @@
 	  source the Kconfig file from the custom board directory (2014-1-16).
 	* Makefile.unix, Makefile.win, and configs/Kconfig:  After thinking a
 	  little harder, I re-implemented the backed-out custom configuration
-	  feature.  The new version does not have bad side-effect (1) (but stil
+	  feature.  The new version does not have bad side-effect (1) (but still
 	  has bad side-effect (2)) (2014-1-16).
 	* arch/x86/Kconfig and configs/qemu-i486/nsh/Make.defs and
 	  ostest/Make.defs:  Add a configuration option to select the -m32
@@ -6486,8 +6486,8 @@
 	  compiler (2014-1-18).
 	* include/ctype.h: Typo in macro name: iscntrl, not iscontrol (2104-1-17)
 	* libc/unistd/lib_getopt.c:  If there are no arguments (argc == 1), then
-	  getopt() make like the optind variable in an undefined state (2014-1-20).
-	* configs/olimex-stm32-p107:  Failes to build is SPI3 for UEXT is not
+	  getopt() will leave the optind variable in an undefined state (2014-1-20).
+	* configs/olimex-stm32-p107:  Fails to build if SPI3 for UEXT is not
 	  remapped.  From Max Holtzberg (2014-1-21).
 	* Several network related files:  Changes from Max Holtzberg to improve
 	  how network status is reported.  New controls to manage carrier
@@ -6501,7 +6501,7 @@
 	* /arch/arm/src/Makefile: dependency directory list is now computed
 	  from the VPATH.  From Richard Cochran (2014-1-23).
 	* arch/arm/src/efm32 and include/efm32:  Basic support for the EFM3
-	  processor family from Richarc Cochran (2014-1-23).
+	  processor family from Richard Cochran (2014-1-23).
 	* configs/efm32-dk3650:  This is Energy Micro's development kit for
 	  the Leopard Gecko MCU, which is an ARM Cortex-M3 device.  From Richard
 	  Cochran (2014-1-23).
@@ -6522,7 +6522,7 @@
 	  to fix 'Error: .size expression for idle_stack does not evaluate to
 	  a constant" (2014-1-25).
 	* arch/arm/include/efm32, arch/arm/src/efm32, and configs/efm32-dk360:
-	  Removed all EFM32 support.  Not yet readyto be fielded (2014-1-27).
+	  Removed all EFM32 support.  Not yet ready to be fielded (2014-1-27).
 	* arch/arm/src/armv7-a/arm_head.S, sama5/sam_boot.c, and several other
 	  files:  Now supports execution from NOR FLASH with .data and .bss in
 	  SDRAM.  This was not possible prior to this because .bss and .data
@@ -6533,3 +6533,5 @@
 	  original, efficient logic violated the ARM C ABI.  It was okay when
 	  called from boot logic, but not when called from C logic.  This fixes
 	  bugginess reported on 2014-1-28. (2014-1-29).
+
+6.34 2014-xx-xx Gregory Nutt <gnutt@nuttx.org>
diff --git a/nuttx/ReleaseNotes b/nuttx/ReleaseNotes
index 4f8517f26..4f7fc5bee 100644
--- a/nuttx/ReleaseNotes
+++ b/nuttx/ReleaseNotes
@@ -5346,7 +5346,7 @@ Additional new features and extended functionality:
       - Many new drivers including CAN, PWM, SSC/I2S
       - PCK:  Add support for programmable clock outputs.
       - NAND: Driver with hardware ECC and DMA support
- 
+
     * Atmel AT91 SAMA5D3x Boards:
 
       - SAMA5D3x-EK: Add support for the apps/examples/i2schar test.
@@ -5478,7 +5478,7 @@ Bugfixes (see the ChangeLog for details).  Some of these are very important:
     * MTD Drivers
 
       - MTD Partitions:  Fix erase block vs page block confusion. From Ken
-        Pettit 
+        Pettit
       - SST25 Serial Flash:  Improved write performance by fixing a bug that
         prevented operation in the faster write mode.  From David Sidrane.
 
@@ -5487,7 +5487,7 @@ Bugfixes (see the ChangeLog for details).  Some of these are very important:
       - USB MSC Device:  pthread_join() does not work if called from a
         different task group than the pthread.  This is correct behavior,
         but still a problem.  The correct solution would be configure the
-        USB MSC thread to a task, however, this workaround from David 
+        USB MSC thread to a task, however, this workaround from David
         Sidrane plugs the hole for now.
       - USB CDC/ACM, USB MSC, and Composite Device Classes: Un-initialization
         logic caused re-use of a stale pointer.  Changed to a two pass
@@ -5519,3 +5519,310 @@ Bugfixes (see the ChangeLog for details).  Some of these are very important:
         correctly.
       - apps/system/composite/composite_main.c:  The wrong handle was getting
         nullified.  From David Sidrane.
+
+NuttX-6.32
+----------
+
+The 100th release of NuttX, Version 6.33, was made on January 30, 2014,
+and is available for download from the SourceForge website.  Note
+that release consists of two tarballs:  nuttx-6.33.tar.gz and
+apps-6.33.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
+file for build information).
+
+Additional new features and extended functionality:
+
+    * Core OS Interfaces
+
+      - nanosleep() added.  sleep() and usleep() are not longer core OS
+        interfaces.  These have been moved into the library and re-implemented
+        as simple wrappers around nanosleep().
+
+    * File Systems
+
+      - procfs restructure by Ken Pettit.  Added files for MTD status.
+      - procfs extended to show uptime and task group status.
+      - procfs now shows stack information.
+
+    * Networking
+
+      - Add support for the SO_LINGER socket option.  Extended from logic
+        provided by Jason Jiang.  Enabled with  CONFIG_NET_SOLINGER.
+      - TCP write buffering support added.  From Jason Jiang.
+      - Changes from Max Holtzberg to improve how network status is
+        reported.  New controls to manage carrier detect.
+
+    * Graphics
+
+      - Massive reshuffling of files with little or no logic changes.   This
+        reshuffling was necessary to build graphics applications with the
+        kernel builds where the graphics application lie in user space and
+        the core graphic server likes in kernel space.  Moved much logic out
+        of nuttx/graphics to a new user library, libnx.
+
+    * Cortex-A5/A8/A9
+
+      - Existing Cortex-A5 support updated to include Cortex-A8/9.
+      - Add the syscall.h header file needed for the Cortex-A architecture.
+      - Start-up logic now supports execution from FLASH with .data and
+        .bss in SDRAM.  This was not possible prior to this because .bss
+        and .data were initialized before SDRAM was configured.
+
+    * Allwinner A10:
+
+      - Basic support for the Allwinner (A10 Cortex-A8) is in place.
+
+    * Allwinner A10 boards
+
+      - Support for the pcDuino v1 board has been added.  This support
+        is not yet very mature and still lacks many drivers.  It is a
+        good starting point, however, if anyone wants to develop A10
+        support.
+
+    * Atmel SAMA5D3X
+
+      - Start-up logic now supports execution from FLASH with .data and
+        .bss in SDRAM.  This was not possible prior to this because .bss
+        and .data were initialized before SDRAM was configured.
+
+    * Atmel SAMA5D3X Boards
+
+      - Partial logic in place to support the OV2640 camera.  Still needs
+        quite a bit of additional logic to be useful.
+
+    * ARMv7-M
+
+      - Add support for high priority, nested interrupts. This change
+        effects not only core ARMv-7M logic, but all ARMv7-M MCU logic:
+        LM3S, LM4F,  LPC17xx, LPC43xx, SAM3, SAM4, and STM32. See
+        http://www.nuttx.org/doku.php?id=wiki:nxinternal:highperfints
+
+    * STMicro STM32
+
+      - Add clocking support for STM32F107 USB OTG FS (which does not yet
+        work)
+      - Single-wire UART support for the F1 series from Thomas Grubler.
+
+    * STMicro STM32 Boards
+
+      - The Viewtool board can now be configured to support either the
+        STM32F103VCT6 or the STM32F107VCT6.
+      - The Viewtool STM32F107VCT6 now supports networking with the
+        DP83848C module installed.
+      - Add support for Viewtool SSD1289-based LCD on the Viewtool
+        STM32F103VCT6 board (untested)
+      - Add support for the XPT2046 touchscreen controller on the Viewtool
+        LCD module connected to the Viewtool STM32F103 board.
+      - Added kernel mode build support for the STM3240G-EVAL board.  Added
+        a new kernel mode NxWM build configuration
+      - C++ static constructor logic from the nuttx/configs/stm3240g-eval/
+        directory to the apps/platform/stm3240g-eval/up_cxxinitialize.c
+        where is belongs so that it is available in user-space in the kernel
+        mode build.
+      - Add native Windows build support for the Olimex STM32 P107.  From
+        Max Holtzberg
+      - Support for the STM32VL-Discovery board. Contributed by Alan
+        Carvalho de Assis
+      - Added a configuration for testing simple configurations on the
+        PX4FMU v2.
+
+    * ZiLOG ZNEO Boards
+
+      - Add an NSH configuration for the Z16F2800100ZCOG ZNEO board.
+      - Added support for the Toyaga 16Z ZNEO board.  The 16Z board is
+        based on the ZiLOG ZNEOZ16F2811AL20EG part.  See
+        https://github.com/toyaga/16z for further information
+      - Developed a patch to work around a compiler error that is revealed
+        when building the NSH configuration.
+
+    * Architecture-Independent Drivers
+
+      - OV2640 Camera Driver.
+      - Support for the Sharp Memory LCD from Librae.
+
+    * Library
+
+      - Pattern matching logic extended to handle set of characters and
+        ranges of character values.  From Ken Pettit.
+      - sleep() and usleep() move library.  These are not longer core OS
+        interfaces; they are simple wrappers for the nanosleep().
+      - Add an implementation of gets_s().
+      - Extend fopen() to include support for C11 exclusive open ("x")
+        open mode.
+      - Add an implementation of stpcpy()
+      - strtol(), strtoll, strtoul(), strtoull(), and strtod() from
+        libc/string to libc/stdlib where they belong.
+
+    * Header Files
+
+      - Add rsize_t to include/sys/types.h
+      - Add the C11 thread.h header file
+
+    * Configuration/Build System
+
+      - Top level Makefile now supports qconfig and/or gconfig targets that
+        may be used for configuration.  These may be used if you build
+        kconfig-frontends with support for kconfig-qconf and/or
+        kconfig-gconf.
+      - Add CONFIG_DEBUG_NOOPT.  Now you can independently enable/disable
+        debug symbols and optimization
+      - File system related header files moved to include/nuttx/fs
+      - Video related header files moved to include/nuttx/video
+      - Changes for native Windows build: fix creation of a .version file
+        if one does not exist.  Make sure that the APPDIR environment
+        variable is set before configuring.  From Max Holtzberg.
+      - Board configuration sub-directory can now be specified.  The default
+        need not be used.  This is  only useful when CONFIG_ARCH_BOARD_CUSTOM
+        is selected and there is no meaningful default sub-directory.
+      - Many functions renamed to better conform with the naming standard:
+        up_buttoninit() renamed to board_button_initialize(), up_buttons()
+        renamed to board_buttons(), up_irqbutton() renamed to
+        board_button_irq(), up_ledinit() renamed to board_led_intialize(),
+        up_ledon() renamed to board_led_on(), and up_ledoff() renamed to
+        board_led_off(). All prototypes removed from board.h header files.
+        Now ONLY prototypes in include/nuttx/arch.h.
+
+    * Applications
+
+      - NSH: Refactor. Separate NSH command handling and command execution
+        from NSH line parsing.
+      - NSH: Will now support multiple commands on a command line, each
+        separated with a semi-colon.
+      - NSH: Add support of commands enclosed in back quotes as command
+        arguments.
+      - NSH: Can now handle arguments that are concatenations of constant
+        strings, command return data, application return data, and
+        environment variables.
+      - NSH: Add true and false commands.
+      - NSH: Add support for while-do-done and until-do-done loops.  These
+        only work when executing a script file because they depend on the
+        ability to seek in the file to implement the looping behaviors.
+        Can be conditionally compiled out to reduce footprint.
+      - NSH: Loosen up if-then-else-fi syntax to allow a command to be on
+        the same line as the then or else tokens like:
+        "if true; then echo true; else echo false; fi".  More like bash.
+      - NSH: Add a break command that can be executed with a loop to
+        terminate the loop immediately.
+
+      - system/inifile:  A simple .INI file parser.
+      - system/vi:  Add support for a tiny, VI work-alike editor.  This is
+        a minimal full screen editor that words with a terminal emulator
+        that using VT100 commands.
+
+Efforts In Progress.  The following are features that are partially
+implemented but present in this release.  They are not likely be be
+completed soon.
+
+    * kconfig-fronted Configuration:
+
+      - Conversion of old configurations to use the kconfig-frontends
+        tool is an ongoing effort that will continue for some time.
+        At this time, only 53% of the configurations have been converted
+        to use the kconfig-frontends tools.
+
+Bugfixes (see the ChangeLog for details).  Some of these are very important:
+
+    * Core OS
+
+      - Added missing sem_timedwait() system call.
+
+    * Networking
+
+      - Prevent tcp_connect callback from being double freed.  From Max
+        Holtzberg
+      - uiplib:  Support new definitions and state passing for network
+        device status. From Maz Holtzberg.
+
+    * File Systems
+
+      - FAT:  (1) A correction to FAT cluster allocation, and (2) Fix to some
+        root directory logic that was conditionally done only for FAT 32.
+        Apparently this needs to done for all FAT types.  Both from Andrew
+        "Tridge" Tridgell via Lorenz Meier.
+
+    * Binary Formats
+
+      - Fix a small memory leak when attempting to load a program from a file.
+
+    * Cortex-A8/9
+
+      - Fix some errors in the cache invalidation logic (only seem to matter
+        for Cortex-A8).
+      - Add more nop's after enabling the MMU.  The cortex-a8 seems to need
+        these
+
+    * Graphics
+
+      - Fix a typo that caused a compilation error when
+        CONFIG_NXCONSOLE_BPP < 8.  From Librae
+
+    * ARMv7-M
+
+      - Correct alignment of RAM vector table.
+      - Interrupt handling: Do not disable and enable the IRQ on each
+        entry, (2) this interferes with controlling the IRQ interrupt
+        setting from interrupt handlers, and (3) up_disable_irq() does
+        not work anyway so that this has never done anything.
+      - Fix all implementations of up_disable_irq() for all Cortex-M3 and
+        M4 architectures:  To enable an interrupt on the Cortex-M3/4 CPU,
+        you need to set a bit in the ISER register.  To disable the
+        interrupt, you need to set a bit in the ICER register.  Existing
+        logic was trying to disable interrupts by clearing the bit in the
+        ISER register.  That will not work; writing a '0' to the ISER
+        register has no effect.  That  means that up_disable_irq() was
+        doing nothing!  It turns out that that is not really important
+        because up_disable_irq() is not really used for that purpose.  But
+        some spurions STM32 ADC interrupts have been reported to me and this
+        turned out to be the cause in that case.  Thanks to Manuel Stühn for
+        the tip.
+
+    * STMicro STM32
+
+      - Fix configuration and pin definitions that would prevent building
+        USB for the connectivity and performance lines.
+      - STM32L15xx: Fix a typo in USB pin definitions
+      - Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb
+      - Various fixes for STM32F103ZE SPI3 pin mapping definitions.  From
+        Steve Redler IV
+
+    * STMicro STM32 Boards
+
+      - Olimex STM32-P107:  Failed to build if SPI3 for UEXT is not remapped.
+        From Max Holtzberg
+
+    * x86 Boards
+
+      - Add a configuration option to select the -m32 compiler option when
+        building for a 32-bit target on a native 64-bit compiler.  So far,
+        only used for the qemu/i486 configuration.
+      - Patch from Matt Campbell to fix 'Error: .size expression for idle_stack
+        does not evaluate to a constant".
+
+    * Library
+
+      - strftime(): Needs null termination on the generated string.  From
+        Max Holtzberg.
+      - Typo in ctype.h macro name: iscntrl(), not iscontrol().
+      - If there are no arguments (argc == 1), then getopt() will leave the
+        optind variable in an undefined state (2014-1-20).
+      - ARMv7-M memcpy(): Assembler changes with the gcc-47 distribution
+        from ARM mean that we need to be explicit about branch sizes; one
+        or more of the wide branch opcodes results in bad table branching.
+        From Mike Smith.
+
+    * Configuration/Build System
+
+      - Fixes for some tools/ for Windows build issues from Max Holtzberg.
+      - Config.mk: 'cypath' must be called if we are using a Windows native
+        toolchain with the Cygwin 'make' to convert paths to proper
+        Windows paths.  From Richard Cochran.
+      - ARM Makefile: Dependency directory list is now computed from the
+        VPATH.  From Richard Cochran.
+      - builtin/Makefile: Fixes for native Windows build from Max Holtzberg.
+      - Refactor some configuration dependencies:  NSH networking features
+        should depend on netutil selections; netutil selections, in turn,
+        should depend on networking selections.
+
+    * Applications
+
+      - NSH: Modified the df -h logic to eliminate truncating numbers in
+        conversion (like 7900 -> 7M).  From Ken Pettit.