configs/mirtoo/nxffs converted to use the kconfig-frontends

4 files changed, 813 insertions, 516 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index afb63539b..35449483e 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -6741,4 +6741,6 @@
 	  kconfig-frontends tools (2014-3-2).
 	* configs/stm3210e-eval/nx: Configuration converted to use the
           kconfig-frontends tools (2014-3-2).
+	* configs/mirtoo/nxffs: Configuration converted to use the kconfig-frontends
+          tools (2014-3-1).
 
diff --git a/nuttx/configs/mirtoo/README.txt b/nuttx/configs/mirtoo/README.txt
index dd06163ac..0bd53730a 100644
--- a/nuttx/configs/mirtoo/README.txt
+++ b/nuttx/configs/mirtoo/README.txt
@@ -859,8 +859,8 @@ selected as follow:
 
 Where <subdir> is one of the following:
 
-  nsh:
-  ====
+  nsh
+
     This configuration directory holds configuration files tht can
     be used to support the NuttShell (NSH).  This configuration use
     UART1 which is available on FUNC 4 and 5 on connector X3:
@@ -881,64 +881,73 @@ Where <subdir> is one of the following:
 
     2. UART2
 
-      If you are not using MPLAB to debug, you may switch to UART2
-      by modifying the NuttX configuration to disable UART1 and to
-      select UART2.  You should also change Make.defs to use the
-      release.ld linker script instead of the debug.ld link script.
+       If you are not using MPLAB to debug, you may switch to UART2
+       by modifying the NuttX configuration to disable UART1 and to
+       select UART2.  You should also change Make.defs to use the
+       release.ld linker script instead of the debug.ld link script.
 
     3. This configuration also uses the Microchip C32 toolchain under
-    windows by default:
+       windows by default:
+
+         CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y : Lite version of windows toolchain
 
-      CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y : Lite version of windows toolchain
+       To switch to the Linux C32 toolchain you will have to change (1) the
+       toolchain selection in .config (after configuration) and (2) the
+       path to the toolchain in setenv.sh.  See notes above with regard to
+       the XC32 toolchain.
 
-    To switch to the Linux C32 toolchain you will have to change (1) the
-    toolchain selection in .config (after configuration) and (2) the
-    path to the toolchain in setenv.sh.  See notes above with regard to
-    the XC32 toolchain.
+    4. PGA117 Support
 
-    PGA117 Support:
-    --------------
-    The Mirtoo's PGA117 amplifier/multipexer is not used by this configuration
-    but can be enabled by setting:
+       The Mirtoo's PGA117 amplifier/multiplexer is not used by this configuration
+       but can be enabled by setting:
 
-       CONFIG_ADC=y         : Enable support for analog input devices
-       CONFIG_SPI_OWNBUS=y  : If the PGA117 is the only device on the bus
-       CONFIG_ADC_PGA11X=y  : Enable support for the PGA117
+         CONFIG_ADC=y         : Enable support for analog input devices
+         CONFIG_SPI_OWNBUS=y  : If the PGA117 is the only device on the bus
+         CONFIG_ADC_PGA11X=y  : Enable support for the PGA117
+
+  nxffs
 
-  nxffs:
-  ======
     This is a configuration very similar to the nsh configuration.  This
     configure also provides the NuttShell (NSH).  And this configuration use
     UART1 which is available on FUNC 4 and 5 on connector X3 (as described
     for the nsh configuration).  This configuration differs from the nsh
     configuration in the following ways:
 
-    1) It uses the Pinguino toolchain be default (this is easily changed,
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configurations using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. It uses the Pinguino toolchain be default (this is easily changed,
        see above).
 
-       CONFIG_MIPS32_TOOLCHAIN_PINGUINOW=y
+         CONFIG_MIPS32_TOOLCHAIN_PINGUINOW=y
 
-    2) SPI2 is enabled and support is included for the NXFFS file system
+    3. SPI2 is enabled and support is included for the NXFFS file system
        on the 32Mbit SST25 device on the Mirtoo board.  NXFFS is the NuttX
        wear-leveling file system.
 
-       CONFIG_PIC32MX_SPI2=y
-       CONFIG_MTD_SST25=y
-       CONFIG_SST25_SECTOR512=y
-       CONFIG_DISABLE_MOUNTPOINT=n
-       CONFIG_FS_NXFFS=y
-       CONFIG_NSH_ARCHINIT=y
+         CONFIG_PIC32MX_SPI2=y
+         CONFIG_MTD_SST25=y
+         CONFIG_SST25_SECTOR512=y
+         CONFIG_DISABLE_MOUNTPOINT=n
+         CONFIG_FS_NXFFS=y
+         CONFIG_NSH_ARCHINIT=y
 
-    3) Many operating system features are suppressed to produce a smaller
+    4. Many operating system features are suppressed to produce a smaller
        footprint.
 
-       CONFIG_SCHED_WAITPID=n
-       CONFIG_DISABLE_POSIX_TIMERS=y
-       CONFIG_DISABLE_PTHREAD=y
-       CONFIG_DISABLE_MQUEUE=y
-       CONFIG_DISABLE_MQUEUE=y
+         CONFIG_SCHED_WAITPID=n
+         CONFIG_DISABLE_POSIX_TIMERS=y
+         CONFIG_DISABLE_PTHREAD=y
+         CONFIG_DISABLE_MQUEUE=y
+         CONFIG_DISABLE_MQUEUE=y
 
-    4) Many NSH commands are suppressed, also for a smaller FLASH footprint
+    5. Many NSH commands are suppressed, also for a smaller FLASH footprint
 
        CONFIG_NSH_DISABLESCRIPT=y
        CONFIG_NSH_DISABLEBG=y
@@ -949,50 +958,49 @@ Where <subdir> is one of the following:
        CONFIG_NSH_DISABLE_GET=y
        CONFIG_NSH_DISABLE_IFCONFIG=y
        CONFIG_NSH_DISABLE_KILL=y
-       CONFIG_NSH_DISABLE_MKFATFS=y
        CONFIG_NSH_DISABLE_MKFIFO=y
        CONFIG_NSH_DISABLE_MKRD=y
-       CONFIG_NSH_DISABLE_NFSMOUNT=y
-       CONFIG_NSH_DISABLE_PING=y
        CONFIG_NSH_DISABLE_PUT=y
        CONFIG_NSH_DISABLE_SH=y
        CONFIG_NSH_DISABLE_TEST=y
        CONFIG_NSH_DISABLE_WGET=y
 
-    When the system boots, you should have the NXFFS file system mounted
-    at /mnt/sst25.
+      When the system boots, you should have the NXFFS file system mounted
+      at /mnt/sst25.
+
+      NOTES:
+
+      a) It takes many seconds to boot the sytem using the NXFFS
+         file system because the entire FLASH must be verified on power up
+         (and longer the first time that NXFFS comes up and has to format the
+         entire FLASH).
+      b) FAT does not have these delays and this configuration can be modified
+         to use the (larger) FAT file system as described below.  But you will,
+         or course, lose the wear-leveling feature if FAT is used.
 
-    NOTES:  (1) It takes many seconds to boot the sytem using the NXFFS
-    file system because the entire FLASH must be verified on power up
-    (and longer the first time that NXFFS comes up and has to format the
-    entire FLASH). (2) FAT does not have these delays and this configuration
-    can be modified to use the (larger) FAT file system as described below.
-    But you will, or course, lose the wear-leveling feature if FAT is used.
+    6. FAT
 
-    fat:
-    ----
-    There is no FAT configuration, but the nxffx configuration can be used
-    to support the FAT FS if the following changes are made to the NuttX
-    configuration file:
+       There is no FAT configuration, but the nxffx configuration can be used
+       to support the FAT FS if the following changes are made to the NuttX
+       configuration file:
 
-      CONFIG_FS_NXFFS=n
-      CONFIG_FS_FAT=y
-      CONFIG_NSH_DISABLE_MKFATFS=n
+         CONFIG_FS_NXFFS=n
+         CONFIG_FS_FAT=y
+         CONFIG_NSH_DISABLE_MKFATFS=n
 
-    In this configuration, the FAT file system will not be automatically
-    monounted.  When NuttX boots to the NSH prompt, you will find the
-    SST5 block driver at /dev/mtdblock0.  This can be formatted with a
-    FAT file system and mounted with these commands:
+       In this configuration, the FAT file system will not be automatically
+       mounted.  When NuttX boots to the NSH prompt, you will find the
+       SST5 block driver at /dev/mtdblock0.  This can be formatted with a
+       FAT file system and mounted with these commands:
 
-      nsh> mkfatfs /dev/mtdblock0
-      nsh> mount -t vfat /dev/mtdblock0 /mnt/sst25
+         nsh> mkfatfs /dev/mtdblock0
+         nsh> mount -t vfat /dev/mtdblock0 /mnt/sst25
 
-    PGA117 Support:
-    ---------------
-    The Mirtoo's PGA117 amplifier/multipexer is not used by this configuration
-    but can be enabled by setting:
+    7. PGA117 Support
 
-      CONFIG_ADC=y         : Enable support for anlog input devices
-      CONFIG_SPI_OWNBUS=n  : The PGA117 is *not* the only device on the bus
-      CONFIG_ADC_PGA11X=y  : Enable support for the PGA117
+       The Mirtoo's PGA117 amplifier/multipexer is not used by this
+       configuration but can be enabled by setting:
 
+         CONFIG_ADC=y         : Enable support for anlog input devices
+         CONFIG_SPI_OWNBUS=n  : The PGA117 is *not* the only device on the bus
+         CONFIG_ADC_PGA11X=y  : Enable support for the PGA117
diff --git a/nuttx/configs/mirtoo/nxffs/appconfig b/nuttx/configs/mirtoo/nxffs/appconfig
deleted file mode 100644
index b9c9d36bb..000000000
--- a/nuttx/configs/mirtoo/nxffs/appconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-############################################################################
-# configs/mirtoo/nxffs/appconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-# The NSH application library
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
diff --git a/nuttx/configs/mirtoo/nxffs/defconfig b/nuttx/configs/mirtoo/nxffs/defconfig
index f72b59d7c..acfa92fe4 100644
--- a/nuttx/configs/mirtoo/nxffs/defconfig
+++ b/nuttx/configs/mirtoo/nxffs/defconfig
@@ -1,257 +1,362 @@
-############################################################################
-# configs/mirtoo/nxffs/defconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="mips"
-CONFIG_ARCH_MIPS=y
-CONFIG_ARCH_MIPS32=y
-CONFIG_ARCH_CHIP="pic32mx"
-CONFIG_ARCH_CHIP_PIC32MX250F128D=y
-CONFIG_ARCH_BOARD="mirtoo"
-CONFIG_ARCH_BOARD_MIRTOO=y
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
 CONFIG_DEFAULT_SMALL=y
-CONFIG_BOARD_LOOPSPERMSEC=8079
-CONFIG_RAM_SIZE=32768
-CONFIG_RAM_START=0xa0000000
-CONFIG_ARCH_NOINTC=n
-CONFIG_ARCH_VECNOTIRQ=y
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
 
 #
-# Enable support for RAM-based functions
-# (If selected, then modifications are needed in linker scripts as well)
+# Build Configuration
 #
-CONFIG_ARCH_RAMFUNCS=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
 
 #
-# Identify toolchain and linker options
+# Binary Output Formats
 #
-CONFIG_PIC32MX_MICROCHIPW=n
-CONFIG_PIC32MX_MICROCHIPL=n
-CONFIG_PIC32MX_MICROCHIPW_LITE=n
-CONFIG_PIC32MX_MICROCHIPL_LITE=n
-CONFIG_PIC32MX_MICROCHIPOPENL=n
-CONFIG_PIC32MX_PINGUINOW=y
-CONFIG_PIC32MX_PINGUINOL=n
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
 
 #
-# Individual subsystems can be enabled:
+# Customize Header Files
 #
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
 
-CONFIG_PIC32MX_WDT=n
-CONFIG_PIC32MX_TIMER2=n
-CONFIG_PIC32MX_TIMER3=n
-CONFIG_PIC32MX_TIMER4=n
-CONFIG_PIC32MX_TIMER5=n
-CONFIG_PIC32MX_IC1=n
-CONFIG_PIC32MX_IC2=n
-CONFIG_PIC32MX_IC3=n
-CONFIG_PIC32MX_IC4=n
-CONFIG_PIC32MX_IC5=n
-CONFIG_PIC32MX_OC1=n
-CONFIG_PIC32MX_OC2=n
-CONFIG_PIC32MX_OC3=n
-CONFIG_PIC32MX_OC4=n
-CONFIG_PIC32MX_OC5=n
-CONFIG_PIC32MX_I2C1=n
-CONFIG_PIC32MX_I2C2=n
-CONFIG_PIC32MX_SPI1=n
-CONFIG_PIC32MX_SPI2=y
-CONFIG_PIC32MX_UART1=y
-CONFIG_PIC32MX_UART2=n
-CONFIG_PIC32MX_ADC=n
-CONFIG_PIC32MX_PMP=n
-CONFIG_PIC32MX_CVR=n
-CONFIG_PIC32MX_CM1=n
-CONFIG_PIC32MX_CM2=n
-CONFIG_PIC32MX_CM3=n
-CONFIG_PIC32MX_RTCC=n
-CONFIG_PIC32MX_DDP=n
-CONFIG_PIC32MX_FLASH=n
-CONFIG_PIC32MX_BMX=n
-CONFIG_PIC32MX_DMA=n
-CONFIG_PIC32MX_CHE=n
-CONFIG_PIC32MX_USBDEV=n
-CONFIG_PIC32MX_USBHOST=n
-
-#
-# Mirtoo Board Settings
 #
-CONFIG_MTD_SST25=y
-CONFIG_SST25_SPIMODE=1
-CONFIG_SST25_SPIFREQUENCY=20000000
-CONFIG_SST25_SECTOR512=n
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_ARCH_HAVE_STACKCHECK is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+# CONFIG_ARCH_ARM is not set
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+CONFIG_ARCH_MIPS=y
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="mips"
+CONFIG_ARCH_FAMILY="mips32"
+CONFIG_ARCH_CHIP="pic32mx"
+# CONFIG_SERIAL_TERMIOS is not set
+CONFIG_ARCH_CHIP_PIC32MX=y
+CONFIG_ARCH_MIPS32=y
 
 #
-# PIC32MX Configuration Settings
+# MIPS32 Configuration Options
+#
+# CONFIG_MIPS32_TOOLCHAIN_GNU_ELF is not set
+# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW is not set
+# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE is not set
+CONFIG_MIPS32_TOOLCHAIN_PINGUINOW=y
+# CONFIG_MIPS32_FRAMEPOINTER is not set
+
+#
+# PIC32MX Configuration Options
+#
+# CONFIG_ARCH_CHIP_PIC32MX110F016B is not set
+# CONFIG_ARCH_CHIP_PIC32MX110F016C is not set
+# CONFIG_ARCH_CHIP_PIC32MX110F016D is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032B is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032C is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032D is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064B is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064C is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064D is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128B is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128C is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128D is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016B is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016C is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016D is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032B is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032C is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032D is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064B is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064C is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064D is not set
+# CONFIG_ARCH_CHIP_PIC32MX250F128B is not set
+# CONFIG_ARCH_CHIP_PIC32MX250F128C is not set
+CONFIG_ARCH_CHIP_PIC32MX250F128D=y
+# CONFIG_ARCH_CHIP_PIC32MX320F032H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX360F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX360F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX420F032H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX460F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX460F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX534F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX534F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX695F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX695F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX764F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX764F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX795F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX795F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX1 is not set
+CONFIG_ARCH_CHIP_PIC32MX2=y
+# CONFIG_ARCH_CHIP_PIC32MX3 is not set
+# CONFIG_ARCH_CHIP_PIC32MX4 is not set
+# CONFIG_ARCH_CHIP_PIC32MX5 is not set
+# CONFIG_ARCH_CHIP_PIC32MX6 is not set
+# CONFIG_ARCH_CHIP_PIC32MX7 is not set
+# CONFIG_PIC32MX_MVEC is not set
+CONFIG_PIC32MX_T1=y
+
+#
+# PIC32MX Peripheral Support
+#
+# CONFIG_PIC32MX_WDT is not set
+# CONFIG_PIC32MX_T2 is not set
+# CONFIG_PIC32MX_T3 is not set
+# CONFIG_PIC32MX_T4 is not set
+# CONFIG_PIC32MX_T5 is not set
+# CONFIG_PIC32MX_IC1 is not set
+# CONFIG_PIC32MX_IC2 is not set
+# CONFIG_PIC32MX_IC3 is not set
+# CONFIG_PIC32MX_IC4 is not set
+# CONFIG_PIC32MX_IC5 is not set
+# CONFIG_PIC32MX_OC1 is not set
+# CONFIG_PIC32MX_OC2 is not set
+# CONFIG_PIC32MX_OC3 is not set
+# CONFIG_PIC32MX_OC4 is not set
+# CONFIG_PIC32MX_OC5 is not set
+# CONFIG_PIC32MX_I2C1 is not set
+# CONFIG_PIC32MX_I2C2 is not set
+# CONFIG_PIC32MX_I2C3 is not set
+# CONFIG_PIC32MX_I2C4 is not set
+# CONFIG_PIC32MX_I2C5 is not set
+# CONFIG_PIC32MX_SPI1 is not set
+CONFIG_PIC32MX_SPI2=y
+# CONFIG_PIC32MX_SPI3 is not set
+# CONFIG_PIC32MX_SPI4 is not set
+CONFIG_PIC32MX_UART1=y
+# CONFIG_PIC32MX_UART2 is not set
+# CONFIG_PIC32MX_UART3 is not set
+# CONFIG_PIC32MX_UART4 is not set
+# CONFIG_PIC32MX_UART5 is not set
+# CONFIG_PIC32MX_UART6 is not set
+# CONFIG_PIC32MX_ADC is not set
+# CONFIG_PIC32MX_PMP is not set
+# CONFIG_PIC32MX_CM1 is not set
+# CONFIG_PIC32MX_CM2 is not set
+# CONFIG_PIC32MX_CM3 is not set
+# CONFIG_PIC32MX_RTCC is not set
+# CONFIG_PIC32MX_DMA is not set
+# CONFIG_PIC32MX_FLASH is not set
+# CONFIG_PIC32MX_USBDEV is not set
+# CONFIG_PIC32MX_USBHOST is not set
+# CONFIG_PIC32MX_CAN1 is not set
+# CONFIG_PIC32MX_CAN2 is not set
+# CONFIG_PIC32MX_ETHERNET is not set
+# CONFIG_PIC32MX_CTMU is not set
+
+#
+# PIC32MX Peripheral Interrupt Priorities
+#
+CONFIG_PIC32MX_CTPRIO=16
+CONFIG_PIC32MX_CS0PRIO=16
+CONFIG_PIC32MX_CS1PRIO=16
+CONFIG_PIC32MX_INT0PRIO=16
+CONFIG_PIC32MX_INT1PRIO=16
+CONFIG_PIC32MX_INT2PRIO=16
+CONFIG_PIC32MX_INT3PRIO=16
+CONFIG_PIC32MX_INT4PRIO=16
+CONFIG_PIC32MX_T1PRIO=16
+CONFIG_PIC32MX_SPI2PRIO=16
+CONFIG_PIC32MX_UART1PRIO=16
+
+#
+# Device Configuration 0 (DEVCFG0)
 #
 CONFIG_PIC32MX_DEBUGGER=1
 CONFIG_PIC32MX_ICESEL=2
+CONFIG_PIC32MX_PROGFLASHWP=0x3ff
+CONFIG_PIC32MX_BOOTFLASHWP=1
+CONFIG_PIC32MX_CODEWP=1
+
+#
+# Device Configuration 1 (DEVCFG1)
+#
 CONFIG_PIC32MX_OSCOUT=1
 
 #
-# PIC32MX specific serial device driver settings
+# Device Configuration 3 (DEVCFG3)
 #
-CONFIG_UART1_SERIAL_CONSOLE=y
-CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_PIC32MX_USBIDO=0
+CONFIG_PIC32MX_VBUSIO=0
+# CONFIG_PIC32MX_WDENABLE is not set
+CONFIG_PIC32MX_FETHIO=1
+CONFIG_PIC32MX_FMIIEN=1
 
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+CONFIG_ARCH_VECNOTIRQ=y
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_HAVE_RAMFUNCS=y
+# CONFIG_ARCH_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
 
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=8079
+# CONFIG_ARCH_CALIBRATION is not set
 
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
 
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
-CONFIG_UART1_PARITY=0
-CONFIG_UART2_PARITY=0
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0xa0000000
+CONFIG_RAM_SIZE=32768
+# CONFIG_ARCH_HAVE_SDRAM is not set
 
-CONFIG_UART1_2STOP=0
-CONFIG_UART2_2STOP=0
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_MIRTOO=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="mirtoo"
 
 #
-# General build options
+# Common Board Options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
 
 #
-# General OS setup
+# Board-Specific Options
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_SCHED=n
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_SPI=n
-
-CONFIG_HAVE_CXX=n
-CONFIG_HAVE_CXXINITIALIZE=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+CONFIG_MIRTOO_RELEASE=2
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
 CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2012
 CONFIG_START_MONTH=6
 CONFIG_START_DAY=22
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-CONFIG_SCHED_WAITPID=n
-CONFIG_SCHED_ATEXIT=n
-
-#
-# Settings for nxflat
-#
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
 CONFIG_DISABLE_POSIX_TIMERS=y
 CONFIG_DISABLE_PTHREAD=y
-CONFIG_DISABLE_SIGNALS=n
+# CONFIG_DISABLE_SIGNALS is not set
 CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
+# CONFIG_DISABLE_ENVIRON is not set
 
 #
-# Allow for architecture optimized implementations
+# Signal Numbers
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
 
 #
 # Sizes of configurable things (0 disables)
@@ -262,9 +367,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_STDIO_LINEBUFFER=y
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -272,268 +374,496 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+CONFIG_MTD=y
+
+#
+# MTD Configuration
+#
+# CONFIG_MTD_PARTITION is not set
+# CONFIG_MTD_BYTE_WRITE is not set
+# CONFIG_MTD_CONFIG is not set
+# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
+
+#
+# MTD Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_RAMMTD is not set
+# CONFIG_MTD_AT24XX is not set
+# CONFIG_MTD_AT25 is not set
+# CONFIG_MTD_AT45DB is not set
+# CONFIG_MTD_M25P is not set
+# CONFIG_MTD_SMART is not set
+# CONFIG_MTD_RAMTRON is not set
+CONFIG_MTD_SST25=y
+CONFIG_SST25_SPIMODE=1
+CONFIG_SST25_SPIFREQUENCY=20000000
+# CONFIG_SST25_READONLY is not set
+# CONFIG_SST25_SECTOR512 is not set
+# CONFIG_SST25_SLOWWRITE is not set
+# CONFIG_SST25_SLOWREAD is not set
+# CONFIG_MTD_SST25XX is not set
+# CONFIG_MTD_SST39FV is not set
+# CONFIG_MTD_W25 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART1=y
+
+#
+# USART Configuration
+#
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART1_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART1 Configuration
+#
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART1_BAUD=115200
+CONFIG_UART1_BITS=8
+CONFIG_UART1_PARITY=0
+CONFIG_UART1_2STOP=0
+# CONFIG_UART1_IFLOWCONTROL is not set
+# CONFIG_UART1_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
 CONFIG_FS_NXFFS=y
-CONFIG_FS_ROMFS=n
+# CONFIG_NXFFS_SCAN_VOLUME is not set
+CONFIG_NXFFS_PREALLOCATED=y
+CONFIG_NXFFS_ERASEDSTATE=0xff
+CONFIG_NXFFS_PACKTHRESHOLD=32
+CONFIG_NXFFS_MAXNAMLEN=255
+CONFIG_NXFFS_TAILTHRESHOLD=8192
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
 
 #
-# Maintain legacy build behavior (revisit)
+# System Logging
 #
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MTD=y
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
 
 #
-# SPI-based MMC/SD driver
+# Memory Management
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
 
 #
-# Block driver buffering
+# Audio Support
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
+# CONFIG_AUDIO is not set
 
 #
-# SDIO-based MMC/SD driver
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
 #
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
 
 #
-# TCP/IP and UDP support via uIP
+# Standard C Library Options
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
-# UIP Network Utilities
+# Non-standard Library Support
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
 
 #
-# USB Device Configuration
+# Basic CXX Support
 #
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
 
 #
-# USB Serial Device Configuration
+# Application Configuration
 #
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=5
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
 
 #
-# USB Storage Device Configuration
+# Built-In Applications
 #
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=1
-CONFIG_USBMSC_EPBULKIN=2
-CONFIG_USBMSC_NRDREQS=8
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=64
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
 
 #
-# PGA117 support
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
 #
-# Prerequisites:
+# Graphics Support
 #
-CONFIG_ADC=n
-CONFIG_SPI_OWNBUS=y
+# CONFIG_TIFF is not set
 
-CONFIG_ADC_PGA11X=n
-#CONFIG_PGA11X_SPIFREQUENCY
-CONFIG_PGA11X_DAISYCHAIN=n
-CONFIG_PGA11X_SPIMODE=1
-CONFIG_PGA11X_MULTIPLE=n
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
-# Settings for examples/uip
+# Network Utilities
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
 
 #
-# Settings for examples/nettest
+# Networking Utilities
 #
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=y
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
 
 #
-# Settings for examples/ostest
+# FreeModBus
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+# CONFIG_MODBUS is not set
 
 #
-# Settings for apps/nshlib
+# NSH Library
 #
-CONFIG_NSH_BUILTIN_APPS=n
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=y
-CONFIG_NSH_DISABLEBG=y
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Each NSH command can be individually disabled via one of the following
-# settings.
-#
-CONFIG_NSH_DISABLE_CAT=n
-CONFIG_NSH_DISABLE_CD=n
-CONFIG_NSH_DISABLE_CP=n
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+
+#
+# Disable Individual commands
+#
+CONFIG_NSH_DISABLE_ADDROUTE=y
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+CONFIG_NSH_DISABLE_CMP=y
 CONFIG_NSH_DISABLE_DD=y
-CONFIG_NSH_DISABLE_ECHO=n
+CONFIG_NSH_DISABLE_DF=y
+CONFIG_NSH_DISABLE_DELROUTE=y
+# CONFIG_NSH_DISABLE_ECHO is not set
 CONFIG_NSH_DISABLE_EXEC=y
 CONFIG_NSH_DISABLE_EXIT=y
-CONFIG_NSH_DISABLE_FREE=n
+# CONFIG_NSH_DISABLE_FREE is not set
 CONFIG_NSH_DISABLE_GET=y
-CONFIG_NSH_DISABLE_HELP=n
+# CONFIG_NSH_DISABLE_HELP is not set
+CONFIG_NSH_DISABLE_HEXDUMP=y
 CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_KILL=y
-CONFIG_NSH_DISABLE_LOSETUP=n
-CONFIG_NSH_DISABLE_LS=n
-CONFIG_NSH_DISABLE_MB=n
-CONFIG_NSH_DISABLE_MKDIR=n
-CONFIG_NSH_DISABLE_MKFATFS=y
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 CONFIG_NSH_DISABLE_MKFIFO=y
 CONFIG_NSH_DISABLE_MKRD=y
-CONFIG_NSH_DISABLE_MH=n
-CONFIG_NSH_DISABLE_MOUNT=n
-CONFIG_NSH_DISABLE_MW=n
-CONFIG_NSH_DISABLE_MV=n
-CONFIG_NSH_DISABLE_NFSMOUNT=y
-CONFIG_NSH_DISABLE_PS=n
-CONFIG_NSH_DISABLE_PING=y
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
 CONFIG_NSH_DISABLE_PUT=y
-CONFIG_NSH_DISABLE_PWD=n
-CONFIG_NSH_DISABLE_RM=n
-CONFIG_NSH_DISABLE_RMDIR=n
-CONFIG_NSH_DISABLE_SET=n
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
 CONFIG_NSH_DISABLE_SH=y
-CONFIG_NSH_DISABLE_SLEEP=n
+# CONFIG_NSH_DISABLE_SLEEP is not set
 CONFIG_NSH_DISABLE_TEST=y
-CONFIG_NSH_DISABLE_UMOUNT=n
-CONFIG_NSH_DISABLE_UNSET=n
-CONFIG_NSH_DISABLE_USLEEP=n
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_NSH_DISABLE_WGET=y
-CONFIG_NSH_DISABLE_XD=n
+# CONFIG_NSH_DISABLE_XD is not set
 
 #
-# Architecture-specific NSH options
+# Configure Command Options
 #
-CONFIG_NSH_MMCSDSPIPORTNO=1
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_DISABLE_SEMICOLON=y
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_NSH_MAXARGUMENTS=6
+# CONFIG_NSH_ARGCAT is not set
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=y
+CONFIG_NSH_DISABLEBG=y
+CONFIG_NSH_CONSOLE=y
 
 #
-# Settings for examples/usbserial
+# USB Trace Support
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+# CONFIG_NSH_CONDEV is not set
+CONFIG_NSH_ARCHINIT=y
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# NxWidgets/NxWM
+#
 
 #
-# Settings for system/usbmsc
+# Platform-specific Support
 #
-CONFIG_SYSTEM_USBMSC_NLUNS=1
-CONFIG_SYSTEM_USBMSC_DEVMINOR1=0
-CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
-CONFIG_SYSTEM_USBMSC_TRACEINIT=n
-CONFIG_SYSTEM_USBMSC_TRACECLASS=n
-CONFIG_SYSTEM_USBMSC_TRACETRANSFERS=n
-CONFIG_SYSTEM_USBMSC_TRACECONTROLLER=n
-CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS=n
+# CONFIG_PLATFORM_CONFIGDATA is not set
 
 #
-# Stack and heap information
+# System Libraries and NSH Add-Ons
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=2048
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set