diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-07-03 22:42:27 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-07-03 22:42:27 +0000 |
commit | 09c0acc69fcfa14940e1fa147e9c8d70540868c4 (patch) | |
tree | f104ac1a2cca6a789495f5ef059d6747237280cb | |
parent | 413b37eac3026bb994829c587bfeae73ad4b502b (diff) | |
download | nuttx-09c0acc69fcfa14940e1fa147e9c8d70540868c4.tar.gz nuttx-09c0acc69fcfa14940e1fa147e9c8d70540868c4.tar.bz2 nuttx-09c0acc69fcfa14940e1fa147e9c8d70540868c4.zip |
Add LPC32xx CAN header file; Add configuration for the NXP LP4330-Xplorer board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4901 42af7a65-404d-4744-a932-0658087f49c3
19 files changed, 3284 insertions, 4 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index cfd7a9081..7286e8d82 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2946,3 +2946,10 @@ board. * configs/ekk-lm3s3b96: Add a configuration to support the TI/Stellaris EKK-LM3S3B96 development board. Contributed by Jose Pablo Rojas V. + * arch/arm/src/lpc43xx/chip: Created header files for *all* (really) + lpc43xx registers and all bit-fields. + * configs/lpc4330-xplorer: Added a configuration for the NXP LPC43XX + Xplorer board. This is just to facilitate testing of the LPC43xx + port but will, with any luck, become proper board support for that + board. + diff --git a/nuttx/arch/arm/Kconfig b/nuttx/arch/arm/Kconfig index 9df0c20a5..a88af0e5f 100644 --- a/nuttx/arch/arm/Kconfig +++ b/nuttx/arch/arm/Kconfig @@ -58,6 +58,11 @@ config ARCH_CHIP_LPC31XX ---help--- NPX LPC31XX architectures (ARM926EJS). +config ARCH_CHIP_LPC43XX + bool "NXP LPC43XX" + ---help--- + NPX LPC43XX architectures (ARM Cortex-M4). + config ARCH_CHIP_SAM3U bool "Atmel AT91SAM3U" ---help--- @@ -89,7 +94,7 @@ config ARCH_ARM920T config ARCH_CORTEXM bool - default y if ARCH_CHIP_KINETIS || ARCH_CHIP_LM3S || ARCH_CHIP_LPC17XX || ARCH_CHIP_SAM3U || ARCH_CHIP_STM32 + default y if ARCH_CHIP_KINETIS || ARCH_CHIP_LM3S || ARCH_CHIP_LPC17XX || ARCH_CHIP_LPC43XX || ARCH_CHIP_SAM3U || ARCH_CHIP_STM32 config ARCH_FAMILY string @@ -164,6 +169,7 @@ source arch/arm/src/lpc17xx/Kconfig source arch/arm/src/lpc214x/Kconfig source arch/arm/src/lpc2378/Kconfig source arch/arm/src/lpc31xx/Kconfig +source arch/arm/src/lpc43xx/Kconfig source arch/arm/src/sam3u/Kconfig source arch/arm/src/stm32/Kconfig source arch/arm/src/str71x/Kconfig diff --git a/nuttx/arch/arm/src/lpc43xx/Kconfig b/nuttx/arch/arm/src/lpc43xx/Kconfig new file mode 100644 index 000000000..5c5a73a8d --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/Kconfig @@ -0,0 +1,95 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +choice + prompt "LPC43XX Chip Selection" + default ARCH_CHIP_LPC4330FET100 + depends on ARCH_CHIP_LPC43XX + +config ARCH_CHIP_LPC4310FBD144 + bool "LPC4310FBD144 + +config ARCH_CHIP_LPC4310FET100 + bool "LPC4310FET100 + +config ARCH_CHIP_LPC4320FBD144 + bool "LPC4320FBD144 + +config ARCH_CHIP_LPC4320FET100 + bool "LPC4320FET100 + +config ARCH_CHIP_LPC4330FBD144 + bool "LPC4330FBD144 + +config ARCH_CHIP_LPC4330FET100 + bool "LPC4330FET100 + +config ARCH_CHIP_LPC4330FET180 + bool "LPC4330FET180 + +config ARCH_CHIP_LPC4330FET256 + bool "LPC4330FET256 + +config ARCH_CHIP_LPC4350FBD208 + bool "LPC4350FBD208 + +config ARCH_CHIP_LPC4350FET180 + bool "LPC4350FET180 + +config ARCH_CHIP_LPC4350FET256 + bool "LPC4350FET256 + +config ARCH_CHIP_LPC4353FBD208 + bool "LPC4353FBD208 + +config ARCH_CHIP_LPC4353FET180 + bool "LPC4353FET180 + +config ARCH_CHIP_LPC4353FET256 + bool "LPC4353FET256 + +config ARCH_CHIP_LPC4357FET180 + bool "LPC4357FET180 + +config ARCH_CHIP_LPC4357FBD208 + bool "LPC4357FBD208 + +config ARCH_CHIP_LPC4357FET256 + bool "LPC4357FET256 + +endchoice + +config ARCH_FAMILY_LPC4310 + bool + default y if ARCH_CHIP_LPC4310FBD144 || ARCH_CHIP_LPC4310FET100 + +config ARCH_FAMILY_LPC4320 + bool + default y if ARCH_CHIP_LPC4320FBD144 || ARCH_CHIP_LPC4320FET100 + +config ARCH_FAMILY_LPC4330 + bool + default y if ARCH_CHIP_LPC4330FBD144 || ARCH_CHIP_LPC4330FET100 || ARCH_CHIP_LPC4330FET180 || ARCH_CHIP_LPC4330FET256 + +config ARCH_FAMILY_LPC4350 + bool + default y if ARCH_CHIP_LPC4350FBD208 || ARCH_CHIP_LPC4350FET180 || ARCH_CHIP_LPC4350FET256 + +config ARCH_FAMILY_LPC4353 + bool + default y if ARCH_CHIP_LPC4353FBD208 || ARCH_CHIP_LPC4353FET180 || ARCH_CHIP_LPC4353FET256 + +config ARCH_FAMILY_LPC4357 + bool + default y if ARCH_CHIP_LPC4357FET180 || ARCH_CHIP_LPC4357FBD208 || ARCH_CHIP_LPC4357FET256 + +config ARCH_CORTEXM3 + bool + default n if !ARCH_CHIP_LPC43XX + +config ARCH_CORTEXM4 + bool + default y if ARCH_CHIP_LPC43XX + diff --git a/nuttx/arch/arm/src/lpc43xx/chip/lpc43_can.h b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_can.h new file mode 100644 index 000000000..cebeaccd8 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_can.h @@ -0,0 +1,458 @@ +/************************************************************************************ + * arch/arm/src/lpc43xx/chip/lpc43_can.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CAN_H +#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CAN_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Register Offsets *****************************************************************/ + +#define LPC43_CAN_CNTL_OFFSET 0x0000 /* CAN control register */ +#define LPC43_CAN_STAT_OFFSET 0x0004 /* Status register */ +#define LPC43_CAN_EC_OFFSET 0x0008 /* Error counter register */ +#define LPC43_CAN_BT_OFFSET 0x000c /* Bit timing register */ +#define LPC43_CAN_INT_OFFSET 0x0010 /* Interrupt register */ +#define LPC43_CAN_TEST_OFFSET 0x0014 /* Test register */ +#define LPC43_CAN_BRPE_OFFSET 0x0018 /* Baud rate prescaler extension register */ + +#define LPC43_CAN_IF1_CMDREQ_OFFSET 0x0020 /* Message interface 1 command request */ +#define LPC43_CAN_IF1_CMDMSKW_OFFSET 0x0024 /* Message interface 1 command mask (write) */ +#define LPC43_CAN_IF1_CMDMSKR_OFFSET 0x0024 /* Message interface 1 command mask (read) */ +#define LPC43_CAN_IF1_MSK1_OFFSET 0x0028 /* Message interface 1 mask 1 */ +#define LPC43_CAN_IF1_MSK2_OFFSET 0x002c /* Message interface 1 mask 2 */ +#define LPC43_CAN_IF1_ARB1_OFFSET 0x0030 /* Message interface 1 arbitration */ +#define LPC43_CAN_IF1_ARB2_OFFSET 0x0034 /* Message interface 1 arbitration */ +#define LPC43_CAN_IF1_MCTRL_OFFSET 0x0038 /* Message interface 1 message control */ +#define LPC43_CAN_IF1_DA1_OFFSET 0x003c /* Message interface 1 data A1 */ +#define LPC43_CAN_IF1_DA2_OFFSET 0x0040 /* Message interface 1 data A2 */ +#define LPC43_CAN_IF1_DB1_OFFSET 0x0044 /* Message interface 1 data B1 */ +#define LPC43_CAN_IF1_DB2_OFFSET 0x0048 /* Message interface 1 data B2 */ + +#define LPC43_CAN_IF2_CMDREQ_OFFSET 0x0080 /* Message interface 2 command request */ +#define LPC43_CAN_IF2_CMDMSKW_OFFSET 0x0084 /* Message interface 2 command mask (write) */ +#define LPC43_CAN_IF2_CMDMSKR_OFFSET 0x0084 /* Message interface 2 command mask (read) */ +#define LPC43_CAN_IF2_MSK1_OFFSET 0x0088 /* Message interface 2 mask 1 */ +#define LPC43_CAN_IF2_MSK2_OFFSET 0x008c /* Message interface 2 mask 2 */ +#define LPC43_CAN_IF2_ARB1_OFFSET 0x0090 /* Message interface 2 arbitration 1 */ +#define LPC43_CAN_IF2_ARB2_OFFSET 0x0094 /* Message interface 2 arbitration 2 */ +#define LPC43_CAN_IF2_MCTRL_OFFSET 0x0098 /* Message interface 2 message control */ +#define LPC43_CAN_IF2_DA1_OFFSET 0x009c /* Message interface 2 data A1 */ +#define LPC43_CAN_IF2_DA2_OFFSET 0x00a0 /* Message interface 2 data A2 */ +#define LPC43_CAN_IF2_DB1_OFFSET 0x00a4 /* Message interface 2 data B1 */ +#define LPC43_CAN_IF2_DB2_OFFSET 0x00a8 /* Message interface 2 data B2 */ + +#define LPC43_CAN_TXREQ1_OFFSET 0x0100 /* Transmission request 1 */ +#define LPC43_CAN_TXREQ2_OFFSET 0x0104 /* Transmission request 2 */ +#define LPC43_CAN_ND1_OFFSET 0x0120 /* New data 1 */ +#define LPC43_CAN_ND2_OFFSET 0x0124 /* New data 2 */ +#define LPC43_CAN_IR1_OFFSET 0x0140 /* Interrupt pending 1 */ +#define LPC43_CAN_IR2_OFFSET 0x0144 /* Interrupt pending 2 */ +#define LPC43_CAN_MSGV1_OFFSET 0x0160 /* Message valid 1 */ +#define LPC43_CAN_MSGV2_OFFSET 0x0164 /* Message valid 2 */ +#define LPC43_CAN_CLKDIV_OFFSET 0x0180 /* CAN clock divider register */ + +/* Register Addresses ***************************************************************/ + +#define LPC43_CAN1_CNTL (LPC43_CAN1_BASE+LPC43_CAN_CNTL_OFFSET) +#define LPC43_CAN1_STAT (LPC43_CAN1_BASE+LPC43_CAN_STAT_OFFSET) +#define LPC43_CAN1_EC (LPC43_CAN1_BASE+LPC43_CAN_EC_OFFSET) +#define LPC43_CAN1_BT (LPC43_CAN1_BASE+LPC43_CAN_BT_OFFSET) +#define LPC43_CAN1_INT (LPC43_CAN1_BASE+LPC43_CAN_INT_OFFSET) +#define LPC43_CAN1_TEST (LPC43_CAN1_BASE+LPC43_CAN_TEST_OFFSET) +#define LPC43_CAN1_BRPE (LPC43_CAN1_BASE+LPC43_CAN_BRPE_OFFSET) + +#define LPC43_CAN1_IF1_CMDREQ (LPC43_CAN1_BASE+LPC43_CAN_IF1_CMDREQ_OFFSET) +#define LPC43_CAN1_IF1_CMDMSKW (LPC43_CAN1_BASE+LPC43_CAN_IF1_CMDMSKW_OFFSET) +#define LPC43_CAN1_IF1_CMDMSKR (LPC43_CAN1_BASE+LPC43_CAN_IF1_CMDMSKR_OFFSET) +#define LPC43_CAN1_IF1_MSK1 (LPC43_CAN1_BASE+LPC43_CAN_IF1_MSK1_OFFSET) +#define LPC43_CAN1_IF1_MSK2 (LPC43_CAN1_BASE+LPC43_CAN_IF1_MSK2_OFFSET) +#define LPC43_CAN1_IF1_ARB1 (LPC43_CAN1_BASE+LPC43_CAN_IF1_ARB1_OFFSET) +#define LPC43_CAN1_IF1_ARB2 (LPC43_CAN1_BASE+LPC43_CAN_IF1_ARB2_OFFSET) +#define LPC43_CAN1_IF1_MCTRL (LPC43_CAN1_BASE+LPC43_CAN_IF1_MCTRL_OFFSET) +#define LPC43_CAN1_IF1_DA1 (LPC43_CAN1_BASE+LPC43_CAN_IF1_DA1_OFFSET) +#define LPC43_CAN1_IF1_DA2 (LPC43_CAN1_BASE+LPC43_CAN_IF1_DA2_OFFSET) +#define LPC43_CAN1_IF1_DB1 (LPC43_CAN1_BASE+LPC43_CAN_IF1_DB1_OFFSET) +#define LPC43_CAN1_IF1_DB2 (LPC43_CAN1_BASE+LPC43_CAN_IF1_DB2_OFFSET) + +#define LPC43_CAN1_IF2_CMDREQ (LPC43_CAN1_BASE+LPC43_CAN_IF2_CMDREQ_OFFSET) +#define LPC43_CAN1_IF2_CMDMSKW (LPC43_CAN1_BASE+LPC43_CAN_IF2_CMDMSKW_OFFSET) +#define LPC43_CAN1_IF2_CMDMSKR (LPC43_CAN1_BASE+LPC43_CAN_IF2_CMDMSKR_OFFSET) +#define LPC43_CAN1_IF2_MSK1 (LPC43_CAN1_BASE+LPC43_CAN_IF2_MSK1_OFFSET) +#define LPC43_CAN1_IF2_MSK2 (LPC43_CAN1_BASE+LPC43_CAN_IF2_MSK2_OFFSET) +#define LPC43_CAN1_IF2_ARB1 (LPC43_CAN1_BASE+LPC43_CAN_IF2_ARB1_OFFSET) +#define LPC43_CAN1_IF2_ARB2 (LPC43_CAN1_BASE+LPC43_CAN_IF2_ARB2_OFFSET) +#define LPC43_CAN1_IF2_MCTRL (LPC43_CAN1_BASE+LPC43_CAN_IF2_MCTRL_OFFSET) +#define LPC43_CAN1_IF2_DA1 (LPC43_CAN1_BASE+LPC43_CAN_IF2_DA1_OFFSET) +#define LPC43_CAN1_IF2_DA2 (LPC43_CAN1_BASE+LPC43_CAN_IF2_DA2_OFFSET) +#define LPC43_CAN1_IF2_DB1 (LPC43_CAN1_BASE+LPC43_CAN_IF2_DB1_OFFSET) +#define LPC43_CAN1_IF2_DB2 (LPC43_CAN1_BASE+LPC43_CAN_IF2_DB2_OFFSET) + +#define LPC43_CAN1_TXREQ1 (LPC43_CAN1_BASE+LPC43_CAN_TXREQ1_OFFSET) +#define LPC43_CAN1_TXREQ2 (LPC43_CAN1_BASE+LPC43_CAN_TXREQ2_OFFSET) +#define LPC43_CAN1_ND1 (LPC43_CAN1_BASE+LPC43_CAN_ND1_OFFSET) +#define LPC43_CAN1_ND2 (LPC43_CAN1_BASE+LPC43_CAN_ND2_OFFSET) +#define LPC43_CAN1_IR1 (LPC43_CAN1_BASE+LPC43_CAN_IR1_OFFSET) +#define LPC43_CAN1_IR2 (LPC43_CAN1_BASE+LPC43_CAN_IR2_OFFSET) +#define LPC43_CAN1_MSGV1 (LPC43_CAN1_BASE+LPC43_CAN_MSGV1_OFFSET) +#define LPC43_CAN1_MSGV2 (LPC43_CAN1_BASE+LPC43_CAN_MSGV2_OFFSET) +#define LPC43_CAN1_CLKDIV (LPC43_CAN1_BASE+LPC43_CAN_CLKDIV_OFFSET) + +#define LPC43_CAN2_CNTL (LPC43_CAN2_BASE+LPC43_CAN_CNTL_OFFSET) +#define LPC43_CAN2_STAT (LPC43_CAN2_BASE+LPC43_CAN_STAT_OFFSET) +#define LPC43_CAN2_EC (LPC43_CAN2_BASE+LPC43_CAN_EC_OFFSET) +#define LPC43_CAN2_BT (LPC43_CAN2_BASE+LPC43_CAN_BT_OFFSET) +#define LPC43_CAN2_INT (LPC43_CAN2_BASE+LPC43_CAN_INT_OFFSET) +#define LPC43_CAN2_TEST (LPC43_CAN2_BASE+LPC43_CAN_TEST_OFFSET) +#define LPC43_CAN2_BRPE (LPC43_CAN2_BASE+LPC43_CAN_BRPE_OFFSET) + +#define LPC43_CAN2_IF1_CMDREQ (LPC43_CAN2_BASE+LPC43_CAN_IF1_CMDREQ_OFFSET) +#define LPC43_CAN2_IF1_CMDMSKW (LPC43_CAN2_BASE+LPC43_CAN_IF1_CMDMSKW_OFFSET) +#define LPC43_CAN2_IF1_CMDMSKR (LPC43_CAN2_BASE+LPC43_CAN_IF1_CMDMSKR_OFFSET) +#define LPC43_CAN2_IF1_MSK1 (LPC43_CAN2_BASE+LPC43_CAN_IF1_MSK1_OFFSET) +#define LPC43_CAN2_IF1_MSK2 (LPC43_CAN2_BASE+LPC43_CAN_IF1_MSK2_OFFSET) +#define LPC43_CAN2_IF1_ARB1 (LPC43_CAN2_BASE+LPC43_CAN_IF1_ARB1_OFFSET) +#define LPC43_CAN2_IF1_ARB2 (LPC43_CAN2_BASE+LPC43_CAN_IF1_ARB2_OFFSET) +#define LPC43_CAN2_IF1_MCTRL (LPC43_CAN2_BASE+LPC43_CAN_IF1_MCTRL_OFFSET) +#define LPC43_CAN2_IF1_DA1 (LPC43_CAN2_BASE+LPC43_CAN_IF1_DA1_OFFSET) +#define LPC43_CAN2_IF1_DA2 (LPC43_CAN2_BASE+LPC43_CAN_IF1_DA2_OFFSET) +#define LPC43_CAN2_IF1_DB1 (LPC43_CAN2_BASE+LPC43_CAN_IF1_DB1_OFFSET) +#define LPC43_CAN2_IF1_DB2 (LPC43_CAN2_BASE+LPC43_CAN_IF1_DB2_OFFSET) + +#define LPC43_CAN2_IF2_CMDREQ (LPC43_CAN2_BASE+LPC43_CAN_IF2_CMDREQ_OFFSET) +#define LPC43_CAN2_IF2_CMDMSKW (LPC43_CAN2_BASE+LPC43_CAN_IF2_CMDMSKW_OFFSET) +#define LPC43_CAN2_IF2_CMDMSKR (LPC43_CAN2_BASE+LPC43_CAN_IF2_CMDMSKR_OFFSET) +#define LPC43_CAN2_IF2_MSK1 (LPC43_CAN2_BASE+LPC43_CAN_IF2_MSK1_OFFSET) +#define LPC43_CAN2_IF2_MSK2 (LPC43_CAN2_BASE+LPC43_CAN_IF2_MSK2_OFFSET) +#define LPC43_CAN2_IF2_ARB1 (LPC43_CAN2_BASE+LPC43_CAN_IF2_ARB1_OFFSET) +#define LPC43_CAN2_IF2_ARB2 (LPC43_CAN2_BASE+LPC43_CAN_IF2_ARB2_OFFSET) +#define LPC43_CAN2_IF2_MCTRL (LPC43_CAN2_BASE+LPC43_CAN_IF2_MCTRL_OFFSET) +#define LPC43_CAN2_IF2_DA1 (LPC43_CAN2_BASE+LPC43_CAN_IF2_DA1_OFFSET) +#define LPC43_CAN2_IF2_DA2 (LPC43_CAN2_BASE+LPC43_CAN_IF2_DA2_OFFSET) +#define LPC43_CAN2_IF2_DB1 (LPC43_CAN2_BASE+LPC43_CAN_IF2_DB1_OFFSET) +#define LPC43_CAN2_IF2_DB2 (LPC43_CAN2_BASE+LPC43_CAN_IF2_DB2_OFFSET) + +#define LPC43_CAN2_TXREQ1 (LPC43_CAN2_BASE+LPC43_CAN_TXREQ1_OFFSET) +#define LPC43_CAN2_TXREQ2 (LPC43_CAN2_BASE+LPC43_CAN_TXREQ2_OFFSET) +#define LPC43_CAN2_ND1 (LPC43_CAN2_BASE+LPC43_CAN_ND1_OFFSET) +#define LPC43_CAN2_ND2 (LPC43_CAN2_BASE+LPC43_CAN_ND2_OFFSET) +#define LPC43_CAN2_IR1 (LPC43_CAN2_BASE+LPC43_CAN_IR1_OFFSET) +#define LPC43_CAN2_IR2 (LPC43_CAN2_BASE+LPC43_CAN_IR2_OFFSET) +#define LPC43_CAN2_MSGV1 (LPC43_CAN2_BASE+LPC43_CAN_MSGV1_OFFSET) +#define LPC43_CAN2_MSGV2 (LPC43_CAN2_BASE+LPC43_CAN_MSGV2_OFFSET) +#define LPC43_CAN2_CLKDIV (LPC43_CAN2_BASE+LPC43_CAN_CLKDIV_OFFSET) + +/* Register Bit Definitions *********************************************************/ + +/* CAN control register */ + +#define CAN_CNTL_INIT (1 << 0) /* Bit 0: Initialization */ +#define CAN_CNTL_IE (1 << 1) /* Bit 1: Module interrupt enable */ +#define CAN_CNTL_SIE (1 << 2) /* Bit 2: Status change interrupt enable */ +#define CAN_CNTL_EIE (1 << 3) /* Bit 3: Error interrupt enable */ + /* Bit 4: Reserved */ +#define CAN_CNTL_DAR (1 << 5) /* Bit 5: Disable automatic retransmission */ +#define CAN_CNTL_CCE (1 << 6) /* Bit 6: Configuration change enable */ +#define CAN_CNTL_TEST (1 << 7) /* Bit 7: Test mode enable */ + /* Bits 8-31: Reserved */ +/* Status register */ + +#define CAN_STAT_LEC_SHIFT (0) /* Bits 0-2: Last error code */ +#define CAN_STAT_LEC_MASK (7 << CAN_STAT_LEC_SHIFT) +#define CAN_STAT_LEC_NOE (0 << CAN_STAT_LEC_SHIFT) /* No error */ +#define CAN_STAT_LEC_STUFFE (1 << CAN_STAT_LEC_SHIFT) /* Stuff error */ +#define CAN_STAT_LEC_FORME (2 << CAN_STAT_LEC_SHIFT) /* Form error */ +#define CAN_STAT_LEC_ACKE (3 << CAN_STAT_LEC_SHIFT) /* AckError */ +#define CAN_STAT_LEC_BI1E (4 << CAN_STAT_LEC_SHIFT) /* Bit1Error */ +#define CAN_STAT_LEC_BIT0E (5 << CAN_STAT_LEC_SHIFT) /* Bit0Error */ +#define CAN_STAT_LEC_CRCE (6 << CAN_STAT_LEC_SHIFT) /* CRCError */ +#define CAN_STAT_TXOK (1 << 3) /* Bit 3: Transmitted a message successfully */ +#define CAN_STAT_RXOK (1 << 4) /* Bit 4: Received a message successfully */ +#define CAN_STAT_EPASS (1 << 5) /* Bit 5: Error passive */ +#define CAN_STAT_EWARN (1 << 6) /* Bit 6: Warning status */ +#define CAN_STAT_BOFF (1 << 7) /* Bit 7: Busoff status */ + /* Bits 8-31: Reserved */ +/* Error counter register */ + +#define CAN_EC_TEC_SHIFT (0) /* Bits 0-7: Transmit error counter */ +#define CAN_EC_TEC_MASK (0xff << CAN_EC_TEC_SHIFT) +#define CAN_EC_REC_SHIFT (8) /* Bits 8-14: Receive error counter */ +#define CAN_EC_REC_MASK (0x7f << CAN_EC_REC_SHIFT) +#define CAN_EC_RP (1 << 15) /* Bit 15: Receive error passive */ + /* Bits 16-31: Reserved */ +/* Bit timing register */ + +#define CAN_BT_BRP_SHIFT (0) /* Bits 0-5: Baud rate prescaler */ +#define CAN_BT_BRP_MASK (0x3f << CAN_BT_BRP_SHIFT) +#define CAN_BT_SJW_SHIFT (6) /* Bits 6-7: (Re)synchronization jump width */ +#define CAN_BT_SJW_MASK (3 << CAN_BT_SJW_SHIFT) +#define CAN_BT_TSEG1_SHIFT (8) /* Bits 8-11: Time segment after the sample point */ +#define CAN_BT_TSEG1_MASK (15 << CAN_BT_TSEG1_SHIFT) +#define CAN_BT_TSEG2_SHIFT (12) /* Bits 12-14: Time segment before the sample point */ +#define CAN_BT_TSEG2_MASK (7 << CAN_BT_TSEG2_SHIFT) + /* Bits 15-31: Reserved */ +/* Interrupt register */ + +#define CAN_INT_SHIFT (0) /* Bits 0-15: Interrupt ID */ +#define CAN_INT_MASK (0xffff << CAN_INT_SHIFT) +# define CAN_INT_NONE (0 << CAN_INT_SHIFT) /* No interrupt pending */ +# define CAN_INT_MSG1 (1 << CAN_INT_SHIFT) /* Message 1 */ +# define CAN_INT_MSG2 (2 << CAN_INT_SHIFT) /* Message 2 */ +# define CAN_INT_MSG3 (3 << CAN_INT_SHIFT) /* Message 3 */ +# define CAN_INT_MSG4 (4 << CAN_INT_SHIFT) /* Message 4 */ +# define CAN_INT_MSG5 (5 << CAN_INT_SHIFT) /* Message 5 */ +# define CAN_INT_MSG6 (6 << CAN_INT_SHIFT) /* Message 6 */ +# define CAN_INT_MSG7 (7 << CAN_INT_SHIFT) /* Message 7 */ +# define CAN_INT_MSG8 (8 << CAN_INT_SHIFT) /* Message 8 */ +# define CAN_INT_MSG9 (9 << CAN_INT_SHIFT) /* Message 9 */ +# define CAN_INT_MSG10 (10 << CAN_INT_SHIFT) /* Message 10 */ +# define CAN_INT_MSG11 (11 << CAN_INT_SHIFT) /* Message 11 */ +# define CAN_INT_MSG12 (12 << CAN_INT_SHIFT) /* Message 12 */ +# define CAN_INT_MSG13 (13 << CAN_INT_SHIFT) /* Message 13 */ +# define CAN_INT_MSG14 (14 << CAN_INT_SHIFT) /* Message 14 */ +# define CAN_INT_MSG15 (15 << CAN_INT_SHIFT) /* Message 15 */ +# define CAN_INT_MSG16 (16 << CAN_INT_SHIFT) /* Message 16 */ +# define CAN_INT_MSG17 (17 << CAN_INT_SHIFT) /* Message 17 */ +# define CAN_INT_MSG18 (18 << CAN_INT_SHIFT) /* Message 18 */ +# define CAN_INT_MSG19 (19 << CAN_INT_SHIFT) /* Message 19 */ +# define CAN_INT_MSG20 (20 << CAN_INT_SHIFT) /* Message 20 */ +# define CAN_INT_MSG21 (21 << CAN_INT_SHIFT) /* Message 21 */ +# define CAN_INT_MSG22 (22 << CAN_INT_SHIFT) /* Message 22 */ +# define CAN_INT_MSG23 (23 << CAN_INT_SHIFT) /* Message 23 */ +# define CAN_INT_MSG24 (24 << CAN_INT_SHIFT) /* Message 24 */ +# define CAN_INT_MSG25 (25 << CAN_INT_SHIFT) /* Message 25 */ +# define CAN_INT_MSG26 (26 << CAN_INT_SHIFT) /* Message 26 */ +# define CAN_INT_MSG27 (27 << CAN_INT_SHIFT) /* Message 27 */ +# define CAN_INT_MSG28 (28 << CAN_INT_SHIFT) /* Message 28 */ +# define CAN_INT_MSG29 (29 << CAN_INT_SHIFT) /* Message 29 */ +# define CAN_INT_MSG30 (30 << CAN_INT_SHIFT) /* Message 30 */ +# define CAN_INT_MSG31 (31 << CAN_INT_SHIFT) /* Message 31 */ +# define CAN_INT_MSG32 (32 << CAN_INT_SHIFT) /* Message 32 */ +# define CAN_INT_MSG32 (0x8000 << CAN_INT_SHIFT) /* Status interrupt */ + /* Bits 16-31: Reserved */ +/* Test register */ + /* Bits 0-1: Reserved */ +#define CAN_TEST_BASIC (1 << 2) /* Bit 2: Basic mode */ +#define CAN_TEST_SILENT (1 << 3) /* Bit 3: Silent mode */ +#define CAN_TEST_LBACK (1 << 4) /* Bit 4: Loop back mode */ +#define CAN_TEST_TX_SHIFT (5) /* Bits 5-6: Control of TD pins */ +#define CAN_TEST_TX_MASK (3 << CAN_TEST_TX_SHIFT) +# define CAN_TEST_TX_CAN (0 << CAN_TEST_TX_SHIFT) /* Level controlled CAN controller */ +# define CAN_TEST_TX_MONITOR (1 << CAN_TEST_TX_SHIFT) /* Sample point monitored TD pin */ +# define CAN_TEST_TX_DOMINANT (2 << CAN_TEST_TX_SHIFT) /* TD pin LOW/dominant */ +# define CAN_TEST_TX_RECESSIVE (3 << CAN_TEST_TX_SHIFT) /* TD pin HIGH/recessive */ +#define CAN_TEST_RX (1 << 7) /* Bit 7: Monitors actual value of RD Pin */ + /* Bits 8-31: Reserved */ +/* Baud rate prescaler extension register */ + +#define CAN_BRPE_SHIFT (0) /* Bits 0-3: Baud rate prescaler extension */ +#define CAN_BRPE_MASK (15 << CAN_BRPE_SHIFT) + /* Bits 4-31: Reserved */ +/* Message interface 1/2 command request */ + +#define CAN_CMDREQ_MSGNO_SHIFT (0) /* Bits 0-5: Message number */ +#define CAN_CMDREQ_MSGNO_MASK (0x3f << CAN_CMDREQ_MSGNO_SHIFT) + /* Bits 6-14: Reserved */ +#define CAN_CMDREQ_BUSY (1 << 15) /* Bit 15: BUSY flag */ + /* Bits 16-31: Reserved */ +/* Message interface 1/2 command mask (write) */ + +#define CAN_CMDMSKW_DATAB (1 << 0) /* Bit 0: Access data bytes 4-7 */ +#define CAN_CMDMSKW_DATAA (1 << 1) /* Bit 1: Access data bytes 0-3 */ +#define CAN_CMDMSKW_TXRQST (1 << 2) /* Bit 2: Access transmission request bit */ +#define CAN_CMDMSKW_CLRINTPND (1 << 3) /* Bit 3: Ignored in the write direction */ +#define CAN_CMDMSKW_CTRL (1 << 4) /* Bit 4: Access control bits */ +#define CAN_CMDMSKW_ARB (1 << 5) /* Bit 5: Access arbitration bits */ +#define CAN_CMDMSKW_MASK (1 << 6) /* Bit 6: Access mask bits */ +#define CAN_CMDMSKW_WRRD (1 << 7) /* Bit 7: Write transfer (1) */ + /* Bits 8-31: Reserved */ +/* Message interface 1/2 command mask (read) */ + +#define CAN_CMDMSKR_DATAB (1 << 0) /* Bit 0: Access data bytes 4-7 */ +#define CAN_CMDMSKR_DATAA (1 << 1) /* Bit 1: Access data bytes 0-3 */ +#define CAN_CMDMSKR_NEWDAT (1 << 2) /* Bit 2: Access new data bit */ +#define CAN_CMDMSKR_CLRINTPND (1 << 3) /* Bit 3: Clear interrupt pending bit */ +#define CAN_CMDMSKR_CTRL (1 << 4) /* Bit 4: Access control bits */ +#define CAN_CMDMSKR_ARB (1 << 5) /* Bit 5: Access arbitration bits */ +#define CAN_CMDMSKR_MASK (1 << 6) /* Bit 6: Access mask bits */ +#define CAN_CMDMSKR_WRRD (1 << 7) /* Bit 7: Read transfer (0) */ + /* Bits 8-31: Reserved */ +/* Message interface 1/2 mask 1 */ + +#define CAN_MSK1 0xffff /* Bits 0-15: Identifier mask 0-15 */ + /* Bits 16-31: Reserved */ +/* Message interface 1/2 mask 2 */ + +#define CAN_MSK2 0x1fff /* Bits 0-12: Identifier mask 16-28 */ + /* Bit 13: Reserved */ +#define CAN_MSK2_MDIR (1 << 14) /* Bit 14: Mask message direction */ +#define CAN_MSK2_MXTD (1 << 15) /* Bit 15: Mask extend identifier */ + /* Bits 16-31: Reserved */ +/* Message interface 1/2 arbitration */ + +#define CAN_ARB1 0xffff /* Bits 0-15: Identifier mask 0-15 */ + /* Bits 16-31: Reserved */ +/* Message interface 1/2 arbitration */ + +#define CAN_MSK2 0x1fff /* Bits 0-12: Identifier mask 16-28 */ +#define CAN_MSK2_DIR (1 << 13) /* Bit 13: Message direction */ +#define CAN_MSK2_XTD (1 << 14) /* Bit 14: Extend identifier */ +#define CAN_MSK2_MSGVAL (1 << 15) /* Bit 15: Message valid */ + /* Bits 16-31: Reserved */ +/* Message interface 1 message control */ + +#define CAN_MCTRL_DLC_SHIFT (0) /* Bits 0-3: Data length code */ +#define CAN_MCTRL_DLC_MASK (15 << CAN_MCTRL_DLC_SHIFT) + /* Bits 4-6: Reserved */ +#define CAN_MCTRL_EOB (1 << 7) /* Bit 7: End of buffer */ +#define CAN_MCTRL_TXRQST (1 << 8) /* Bit 8: Transmit request */ +#define CAN_MCTRL_RMTEN (1 << 9) /* Bit 9: Remote enable */ +#define CAN_MCTRL_RXIE (1 << 10) /* Bit 10: Receive interrupt enable */ +#define CAN_MCTRL_TXIE (1 << 11) /* Bit 11: Transmit interrupt enable */ +#define CAN_MCTRL_UMASK (1 << 12) /* Bit 12: Use acceptance mask */ +#define CAN_MCTRL_INTPND (1 << 13) /* Bit 13: Interrupt pending */ +#define CAN_MCTRL_MSGLST (1 << 14) /* Bit 14: Message lost */ +#define CAN_MCTRL_NEWDAT (1 << 15) /* Bit 15: New data */ + /* Bits 16-31: Reserved */ +/* Message interface 1/2 data A1 */ + +#define CAN_DA1_DATA0_SHIFT (0) /* Bits 0-7: Data byte 0 */ +#define CAN_DA1_DATA0_MASK (0xff << CAN_DA1_DATA0_SHIFT) +#define CAN_DA1_DATA1_SHIFT (8) /* Bits 8-15: Data byte 1 */ +#define CAN_DA1_DATA1_MASK (0xff << CAN_DA1_DATA1_SHIFT) + /* Bits 16-31: Reserved */ +/* Message interface 1/2 data A2 */ + +#define CAN_DA2_DATA2_SHIFT (0) /* Bits 0-7: Data byte 2 */ +#define CAN_DA2_DATA2_MASK (0xff << CAN_DA2_DATA2_SHIFT) +#define CAN_DA2_DATA3_SHIFT (8) /* Bits 8-15: Data byte 3 */ +#define CAN_DA2_DATA3_MASK (0xff << CAN_DA2_DATA3_SHIFT) + /* Bits 16-31: Reserved */ +/* Message interface 1/2 data B1 */ + +#define CAN_DB1_DATA4_SHIFT (0) /* Bits 0-7: Data byte 4 */ +#define CAN_DB1_DATA4_MASK (0xff << CAN_DB1_DATA4_SHIFT) +#define CAN_DB1_DATA5_SHIFT (8) /* Bits 8-15: Data byte 5 */ +#define CAN_DB1_DATA5_MASK (0xff << CAN_DB1_DATA5_SHIFT) + /* Bits 16-31: Reserved */ +/* Message interface 1/2 data B2 */ + +#define CAN_DB2_DATA6_SHIFT (0) /* Bits 0-7: Data byte 6 */ +#define CAN_DB2_DATA6_MASK (0xff << CAN_DB2_DATA6_SHIFT) +#define CAN_DB2_DATA7_SHIFT (8) /* Bits 8-15: Data byte 7 */ +#define CAN_DB2_DATA7_MASK (0xff << CAN_DB2_DATA6_SHIFT) + /* Bits 16-31: Reserved */ +/* Transmission request 1 */ + +#define CAN_TXREQ1_MASK 0xffff /* Bits 0-15: TX request bit msg 1-16 */ +#define CAN_TXREQ1(n) (1 << ((n)-1) + /* Bits 16-31: Reserved */ +/* Transmission request 2 */ + +#define CAN_TXREQ2_MASK 0xffff /* Bits 0-15: TX request bit msg 17-32 */ +#define CAN_TXREQ2(n) (1 << ((n)-17) + /* Bits 16-31: Reserved */ +/* New data 1 */ + +#define CAN_ND1_MASK 0xffff /* Bits 0-15: New data bits msg 1-16 */ +#define CAN_ND1(n) (1 << ((n)-1) + /* Bits 16-31: Reserved */ +/* New data 2 */ + +#define CAN_ND2_MASK 0xffff /* Bits 0-15: New data bits msg 17-32 */ +#define CAN_ND2(n) (1 << ((n)-17) + /* Bits 16-31: Reserved */ +/* Interrupt pending 1 */ + +#define CAN_IR1_MASK 0xffff /* Bits 0-15: Interrup pending msg 1-16 */ +#define CAN_IR1(n) (1 << ((n)-1) + /* Bits 16-31: Reserved */ +/* Interrupt pending 2 */ + +#define CAN_IR2_MASK 0xffff /* Bits 0-15: Interrup pending msg 17-32 */ +#define CAN_IR2(n) (1 << ((n)-17) + /* Bits 16-31: Reserved */ +/* Message valid 1 */ + +#define CAN_MSGV1_MASK 0xffff /* Bits 0-15: Interrup pending msg 1-16 */ +#define CAN_MSGV1(n) (1 << ((n)-1) + /* Bits 16-31: Reserved */ +/* Message valid 2 */ + +#define CAN_MSGV2_MASK 0xffff /* Bits 0-15: Interrup pending msg 17-32 */ +#define CAN_MSGV2(n) (1 << ((n)-17) + /* Bits 16-31: Reserved */ +/* CAN clock divider register */ + +#define CAN_CLKDIV_SHIFT (0) /* Bits 0-3: Clock divider value */ +#define CAN_CLKDIV_MASK (15 << CAN_CLKDIV_SHIFT) +# define CAN_CLKDIV_DIV1 (0 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 1 */ +# define CAN_CLKDIV_DIV2 (1 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 2 */ +# define CAN_CLKDIV_DIV3 (2 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 3 */ +# define CAN_CLKDIV_DIV5 (3 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 5 */ +# define CAN_CLKDIV_DIV9 (4 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 9 */ +# define CAN_CLKDIV_DIV 17 (5 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 17 */ +# define CAN_CLKDIV_DIV33 (6 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 33 */ +# define CAN_CLKDIV_DIV65 (7 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 65 */ +# define CAN_CLKDIV_DIV129 (8 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 129 */ +# define CAN_CLKDIV_DIV257 (9 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 257 */ +# define CAN_CLKDIV_DIV513 (10 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 513 */ +# define CAN_CLKDIV_DIV1025 (11 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 1025 */ +# define CAN_CLKDIV_DIV2049 (12 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 2049 */ +# define CAN_CLKDIV_DIV4097 (13 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 4097 */ +# define CAN_CLKDIV_DIV8093 (14 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 8093 */ +# define CAN_CLKDIV_DIV16385 (15 << CAN_CLKDIV_SHIFT) /* CAN_CLK = PCLK / 16385 */ + /* Bits 4-31: Reserved */ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_CAN_H */ diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig index daac74c99..42d189391 100644 --- a/nuttx/configs/Kconfig +++ b/nuttx/configs/Kconfig @@ -162,7 +162,13 @@ config ARCH_BOARD_LPCXPRESSO ---help--- Embedded Artists base board with NXP LPCExpresso LPC1768. This board is based on the NXP LPC1768. The Code Red toolchain is used by default. - STATUS: Under development. + +config ARCH_BOARD_LPC4330_XPLORER + bool "NXP LPCExpresso LPC1768" + depends on ARCH_CHIP_LPC4330FET100 + ---help--- + NXP LPCExpresso LPC4330 Xplorer board. This board is based on the + LPC4330FET100. The Code Red toolchain is used by default. config ARCH_BOARD_M68332EVB bool "Motoroloa M68332EVB" @@ -252,7 +258,7 @@ config ARCH_BOARD_MIRTOO depends on ARCH_CHIP_PIC32MX250F128D ---help--- This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip - PIC32MX250F128D. See http://www.dimitech.com/ for further information. + PIC32MX250F128D. See http://www.dimitech.com/ for further information. config ARCH_BOARD_OLIMEXLPC2378 bool "Olimex-lpc2378 board" @@ -497,7 +503,8 @@ config ARCH_BOARD default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO - default " m68322evb" if ARCH_BOARD_M68332EVB + default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER + default "m68322evb" if ARCH_BOARD_M68332EVB default "mbed" if ARCH_BOARD_MBED default "mcu123-lpc214x" if ARCH_BOARD_MCU123 default "micropendous3" if ARCH_BOARD_MICROPENDOUS @@ -551,6 +558,7 @@ source "configs/lm3s6432-s2e/Kconfig" source "configs/lm3s6965-ek/Kconfig" source "configs/lm3s8962-ek/Kconfig" source "configs/lpcxpresso-lpc1768/Kconfig" +source "configs/lpc4330-xplorer/Kconfig" source "configs/m68332evb/Kconfig" source "configs/mbed/Kconfig" source "configs/mcu123-lpc214x/Kconfig" diff --git a/nuttx/configs/lpc4330-xplorer/Kconfig b/nuttx/configs/lpc4330-xplorer/Kconfig new file mode 100644 index 000000000..b3bdb01d0 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/Kconfig @@ -0,0 +1,19 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +if ARCH_BOARD_LPC4330_XPLORER +config ARCH_LEDS + bool "NuttX LED support" + default n + ---help--- + "Support control of board LEDs by NuttX to indicate system state" + +config ARCH_BUTTONS + bool "Button support" + default n + ---help--- + "Support interfaces to use buttons provided by the board." + +endif diff --git a/nuttx/configs/lpc4330-xplorer/README.txt b/nuttx/configs/lpc4330-xplorer/README.txt new file mode 100644 index 000000000..abb2a8238 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/README.txt @@ -0,0 +1,447 @@ +README +^^^^^^ + +README for NuttX port to the NGX LPC4330-Xplorer board + +Contents +^^^^^^^^ + + LPC4330-Xplorer development board + Development Environment + GNU Toolchain Options + IDEs + NuttX buildroot Toolchain + USB Device Controller Functions + LPC4330-Xplorer Configuration Options + USB Host Configuration + Configurations + +LPC4330-Xplorer board +^^^^^^^^^^^^^^^^^^^^^ + + Memory Map + ---------- + + Block Start Length + Name Address + --------------------- ---------- ------ + RAM 0x10000000 128K + RAM2 0x10080000 72K + RAMAHB 0x20000000 32K + RAMAHB2 0x20008000 16K + RAMAHB3 0x2000c000 16K + SPIFI flash 0x1e000000 4096K + + GPIO Usage: + ----------- + + GPIO PIN SIGNAL NAME + -------------------------------- ------- -------------- + gpio1[12] - LED D2 J10-20 LED1 + gpio1[11] - LED D3 J10-17 LED2 + gpio0[7] - User Button SW2 J8-25 BTN1 + + Console + ------- + + The LPC4330-Xplorer default console is the USB1 virtual COM port (VCOM). + +Development Environment +^^^^^^^^^^^^^^^^^^^^^^^ + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. Testing was performed using the Cygwin + environment. + +GNU Toolchain Options +^^^^^^^^^^^^^^^^^^^^^ + + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The devkitARM GNU toolchain, + 3. The NuttX buildroot Toolchain (see below). + + All testing has been conducted using the NuttX buildroot toolchain. However, + the make system is setup to default to use the devkitARM toolchain. To use + the CodeSourcery or devkitARM toolchain, you simply need add one of the + following configuration options to your .config (or defconfig) file: + + CONFIG_LPC43_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LPC43_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LPC43_DEVKITARM=y : devkitARM under Windows + CONFIG_LPC43_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + + If you are not using CONFIG_LPC43_BUILDROOT, then you may also have to modify + the PATH in the setenv.h file if your make cannot find the tools. + + NOTE: the CodeSourcery (for Windows)and devkitARM are Windows native toolchains. + The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or + Linux native toolchains. There are several limitations to using a Windows based + toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had no effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + Support has been added for making dependencies with the windows-native toolchains. + That support can be enabled by modifying your Make.defs file as follows: + + - MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)" + + If you have problems with the dependency build (for example, if you are not + building on C:), then you may need to modify tools/mkdeps.sh + + NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + +IDEs +^^^^ + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project (There is a simple RIDE project + in the RIDE subdirectory). + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/lpc17xx, + arch/arm/src/common, arch/arm/src/armv7-m, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/lpc17x/lpc17_vectors.S. + +NuttX buildroot Toolchain +^^^^^^^^^^^^^^^^^^^^^^^^^ + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh lpc4330-xplorer/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-defconfig-4.3.3 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + detailed PLUS some special instructions that you will need to follow if you + are building a Cortex-M3 toolchain for Cygwin under Windows. + + NOTE: This is an OABI toolchain. + +LPC4330-Xplorer Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_CORTEXM3=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=lpc43xx + + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: + + CONFIG_ARCH_CHIP_LPC4330=y + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=lpc4330-xplorer (for the LPC4330-Xplorer board) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_LPC4330_XPLORER=y + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case): + + CONFIG_DRAM_SIZE=(32*1024) (32Kb) + + There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1. + + CONFIG_DRAM_START - The start address of installed DRAM + + CONFIG_DRAM_START=0x10000000 + + CONFIG_DRAM_END - Last address+1 of installed RAM + + CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) + + CONFIG_ARCH_IRQPRIO - The LPC43xx supports interrupt prioritization + + CONFIG_ARCH_IRQPRIO=y + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + + Individual subsystems can be enabled: + CONFIG_LPC43_MAINOSC=y + CONFIG_LPC43_PLL0=y + CONFIG_LPC43_PLL1=n + CONFIG_LPC43_ETHERNET=n + CONFIG_LPC43_USBHOST=n + CONFIG_LPC43_USBOTG=n + CONFIG_LPC43_USBDEV=n + CONFIG_LPC43_UART0=y + CONFIG_LPC43_UART1=n + CONFIG_LPC43_UART2=n + CONFIG_LPC43_UART3=n + CONFIG_LPC43_CAN1=n + CONFIG_LPC43_CAN2=n + CONFIG_LPC43_SPI=n + CONFIG_LPC43_SSP0=n + CONFIG_LPC43_SSP1=n + CONFIG_LPC43_I2C0=n + CONFIG_LPC43_I2C1=n + CONFIG_LPC43_I2S=n + CONFIG_LPC43_TMR0=n + CONFIG_LPC43_TMR1=n + CONFIG_LPC43_TMR2=n + CONFIG_LPC43_TMR3=n + CONFIG_LPC43_RIT=n + CONFIG_LPC43_PWM=n + CONFIG_LPC43_MCPWM=n + CONFIG_LPC43_QEI=n + CONFIG_LPC43_RTC=n + CONFIG_LPC43_WDT=n + CONFIG_LPC43_ADC=n + CONFIG_LPC43_DAC=n + CONFIG_LPC43_GPDMA=n + CONFIG_LPC43_FLASH=n + + LPC43xx specific device driver settings + + CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the + console and ttys0 (default is the UART0). + CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UARTn_2STOP - Two stop bits + + LPC43xx specific CAN device driver settings. These settings all + require CONFIG_CAN: + + CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default + Standard 11-bit IDs. + CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC43_CAN1 is defined. + CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC43_CAN2 is defined. + CONFIG_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this number. + (the CCLK frequency is divided by this number to get the CAN clock). + Options = {1,2,4,6}. Default: 4. + CONFIG_CAN2_DIVISOR - CAN2 is clocked at CCLK divided by this number. + (the CCLK frequency is divided by this number to get the CAN clock). + Options = {1,2,4,6}. Default: 4. + CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 + CONFIG_CAN_TSEG2 = the number of CAN time quanta in segment 2. Default: 7 + + LPC43xx specific PHY/Ethernet device driver settings. These setting + also require CONFIG_NET and CONFIG_LPC43_ETHERNET. + + CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY + CONFIG_PHY_AUTONEG - Enable auto-negotion + CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. + CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex + + CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb + CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 + CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 + CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is + the higest priority. + CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). + CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs + CONFIG_DEBUG. + CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. + Also needs CONFIG_DEBUG. + CONFIG_NET_HASH - Enable receipt of near-perfect match frames. + CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. + Automatically set if CONFIG_NET_IGMP is selected. + + LPC43xx USB Device Configuration + + CONFIG_LPC43_USBDEV_FRAME_INTERRUPT + Handle USB Start-Of-Frame events. + Enable reading SOF from interrupt handler vs. simply reading on demand. + Probably a bad idea... Unless there is some issue with sampling the SOF + from hardware asynchronously. + CONFIG_LPC43_USBDEV_EPFAST_INTERRUPT + Enable high priority interrupts. I have no idea why you might want to + do that + CONFIG_LPC43_USBDEV_NDMADESCRIPTORS + Number of DMA descriptors to allocate in SRAM. + CONFIG_LPC43_USBDEV_DMA + Enable lpc17xx-specific DMA support + CONFIG_LPC43_USBDEV_NOVBUS + Define if the hardware implementation does not support the VBUS signal + CONFIG_LPC43_USBDEV_NOLED + Define if the hardware implementation does not support the LED output + + LPC43xx USB Host Configuration + + CONFIG_USBHOST_OHCIRAM_SIZE + Total size of OHCI RAM (in AHB SRAM Bank 1) + CONFIG_USBHOST_NEDS + Number of endpoint descriptors + CONFIG_USBHOST_NTDS + Number of transfer descriptors + CONFIG_USBHOST_TDBUFFERS + Number of transfer descriptor buffers + CONFIG_USBHOST_TDBUFSIZE + Size of one transfer descriptor buffer + CONFIG_USBHOST_IOBUFSIZE + Size of one end-user I/O buffer. This can be zero if the + application can guarantee that all end-user I/O buffers + reside in AHB SRAM. + +USB Host Configuration +^^^^^^^^^^^^^^^^^^^^^^ + +The LPC4330-Xplorer board supports a USB host interface. The hidkbd +example can be used to test this interface. + +The NuttShell (NSH) lpc4330-xplorer can also be modified in order to support USB +host operations. To make these modifications, do the following: + +1. First configure to build the NSH configuration from the top-level + NuttX directory: + + cd tools + ./configure lpc4330-xplorer/nsh + cd .. + +2. Then edit the top-level .config file to enable USB host. Make the + following changes: + + CONFIG_LPC43_USBHOST=n + CONFIG_USBHOST=n + CONFIG_SCHED_WORKQUEUE=y + +When this change is made, NSH should be extended to support USB flash +devices. When a FLASH device is inserted, you should see a device +appear in the /dev (psuedo) directory. The device name should be +like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present +it can be mounted from the NSH command line like: + + ls /dev + mount -t vfat /dev/sda /mnt/flash + +Files on the connect USB flash device should then be accessible under +the mountpoint /mnt/flash. + +Configurations +^^^^^^^^^^^^^^ + +Each LPC4330-Xplorer configuration is maintained in a sudirectory and can be selected +as follow: + + cd tools + ./configure.sh lpc4330-xplorer/<subdir> + cd - + . ./setenv.sh + +Where <subdir> is one of the following: + + hidkbd: + This configuration directory, performs a simple test of the USB host + HID keyboard class driver using the test logic in examples/hidkbd. + + nsh: + Configures the NuttShell (nsh) located at examples/nsh. The + Configuration enables only the serial NSH interfaces. See notes + above for enabling USB host support in this configuration. diff --git a/nuttx/configs/lpc4330-xplorer/include/board.h b/nuttx/configs/lpc4330-xplorer/include/board.h new file mode 100644 index 000000000..ce455630d --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/include/board.h @@ -0,0 +1,222 @@ +/**************************************************************************** + * configs/lpc4330-xplorer/include/board.h + * include/arch/board/board.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_H +#define __ARCH_BOARD_BOARD_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <stdbool.h> + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +# include <nuttx/irq.h> +#endif + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Clocking ****************************************************************/ +/* NOTE: The following definitions require lpc43_syscon.h. It is not included here + * because the including C file may not have that file in its include path. + */ + +#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */ +#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */ +#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */ +#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */ + +/* This is the clock setup we configure for: + * + * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source + * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1 + * CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6 + */ + +#define LPC43_CCLK 80000000 /* 80Mhz*/ + +/* Select the main oscillator as the frequency source. SYSCLK is then the frequency + * of the main oscillator. + */ + +#undef CONFIG_LPC43_MAINOSC +#define CONFIG_LPC43_MAINOSC 1 +#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN + +/* Select the main oscillator and CCLK divider. The output of the divider is CCLK. + * The input to the divider (PLLCLK) will be determined by the PLL output. + */ + +#define BOARD_CCLKCFG_DIVIDER 6 +#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT) + +/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK). + * + * Source clock: Main oscillator + * PLL0 Multiplier value (M): 20 + * PLL0 Pre-divider value (N): 1 + * + * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz + */ + +#undef CONFIG_LPC43_PLL0 +#define CONFIG_LPC43_PLL0 1 +#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN + +#define BOARD_PLL0CFG_MSEL 20 +#define BOARD_PLL0CFG_NSEL 1 +#define BOARD_PLL0CFG_VALUE \ + (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \ + ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT)) + +/* PLL1 -- Not used. */ + +#undef CONFIG_LPC43_PLL1 +#define BOARD_PLL1CFG_MSEL 36 +#define BOARD_PLL1CFG_NSEL 1 +#define BOARD_PLL1CFG_VALUE \ + (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \ + ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT)) + +/* USB divider. This divider is used when PLL1 is not enabled to get the + * USB clock from PLL0: + * + * USBCLK = PLL0CLK / 10 = 48MHz + */ + +#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10 + +/* FLASH Configuration */ + +#undef CONFIG_LP17_FLASH +#define CONFIG_LP17_FLASH 1 +#define BOARD_FLASHCFG_VALUE 0x0000303a + +/* LED definitions *********************************************************/ +/* The Lincoln 80 has 2 LEDs along the bottom of the board. Green or off. + * If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows + * for NuttX debug functionality (where NC means "No Change"). + * + * During the boot phases. LED1 and LED2 will show boot status. + */ + /* LED1 LED2 */ +#define LED_STARTED 0 /* OFF OFF */ +#define LED_HEAPALLOCATE 1 /* GREEN OFF */ +#define LED_IRQSENABLED 2 /* OFF GREEN */ +#define LED_STACKCREATED 3 /* OFF OFF */ + +/* After the system is booted, this logic will no longer use LEDs 1 & 2. + * They are available for use the application software using lpc43_led + * (prototyped below) + */ + /* LED1 LED2 LED3 LED4 */ +#define LED_INIRQ 4 /* NC NC NC ON (momentary) */ +#define LED_SIGNAL 5 /* NC NC NC ON (momentary) */ +#define LED_ASSERTION 6 /* NC NC NC ON (momentary) */ +#define LED_PANIC 7 /* NC NC NC ON (1Hz flashing) */ + +#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1 +#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1 +#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1 +#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1 + +/* We need to redefine USB_PWRD as GPIO to get USB Host working + * Also remember to add 2 resistors of 15K to D+ and D- pins. + */ + +#ifdef CONFIG_USBHOST +# ifdef GPIO_USB_PWRD +# undef GPIO_USB_PWRD +# define GPIO_USB_PWRD (GPIO_INPUT | GPIO_PORT1 | GPIO_PIN22) +# endif +#endif + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +#ifndef __ASSEMBLY__ + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc43_boardinitialize + * + * Description: + * All LPC43xx architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ****************************************************************************/ + +EXTERN void lpc43_boardinitialize(void); + +/**************************************************************************** + * Name: lpc43_led + * + * Description: + * Once the system has booted, these functions can be used to control LEDs 1 & 2 + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_LEDS +EXTERN void lpc43_led(int lednum, int state); +#endif + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/lpc4330-xplorer/ostest/Make.defs b/nuttx/configs/lpc4330-xplorer/ostest/Make.defs new file mode 100644 index 000000000..f161e34e2 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/ostest/Make.defs @@ -0,0 +1,162 @@ +############################################################################ +# configs/lpc4330-xplorer/nsh/Make.defs +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config + +# Setup for the selected toolchain + +ifeq ($(CONFIG_LPC43_CODESOURCERYW),y) + # CodeSourcery under Windows + CROSSDEV = arm-none-eabi- + WINTOOL = y + ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft +endif +ifeq ($(CONFIG_LPC43_CODESOURCERYL),y) + # CodeSourcery under Linux + CROSSDEV = arm-none-eabi- + ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft + MAXOPTIMIZATION = -O2 +endif +ifeq ($(CONFIG_LPC43_DEVKITARM),y) + # devkitARM under Windows + CROSSDEV = arm-eabi- + WINTOOL = y + ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft +endif +ifeq ($(CONFIG_LPC43_BUILDROOT),y) + # NuttX buildroot under Linux or Cygwin + CROSSDEV = arm-elf- + ARCHCPUFLAGS = -mtune=cortex-m4 -march=armv7-m -mfloat-abi=soft + MAXOPTIMIZATION = -Os +endif + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/winlink.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +define PREPROCESS + @echo "CPP: $1->$2" + @$(CPP) $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + @echo "CC: $1" + @$(CC) -c $(CFLAGS) $1 -o $2 +endef + +define COMPILEXX + @echo "CXX: $1" + @$(CXX) -c $(CXXFLAGS) $1 -o $2 +endef + +define ASSEMBLE + @echo "AS: $1" + @$(CC) -c $(AFLAGS) $1 -o $2 +endef + +define ARCHIVE + echo "AR: $2"; \ + $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } +endef + +define CLEAN + @rm -f *.o *.a +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx/configs/lpc4330-xplorer/ostest/appconfig b/nuttx/configs/lpc4330-xplorer/ostest/appconfig new file mode 100644 index 000000000..5bba0b354 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/ostest/appconfig @@ -0,0 +1,39 @@ +############################################################################ +# configs/lpc4330-xplorer/ostest/appconfig +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# Path to example in apps/examples containing the user_start entry point + +CONFIGURED_APPS += examples/ostest + diff --git a/nuttx/configs/lpc4330-xplorer/ostest/defconfig b/nuttx/configs/lpc4330-xplorer/ostest/defconfig new file mode 100644 index 000000000..ea5e141a9 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/ostest/defconfig @@ -0,0 +1,821 @@ +############################################################################ +# configs/lpc4330-xplorer/ostest/defconfig +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip familyl. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_DRAM_END - Last address+1 of installed RAM +# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization +# +CONFIG_ARCH=arm +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_CHIP=lpc43xx +CONFIG_ARCH_CHIP_LPC4320=y +CONFIG_ARCH_BOARD=lpc4330-xplorer +CONFIG_ARCH_BOARD_LPC4330_XPLORER=y +CONFIG_BOARD_LOOPSPERMSEC=7982 +CONFIG_DRAM_SIZE=(128*1024) +CONFIG_DRAM_START=0x10000000 +CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=n + +# +# Identify toolchain and linker options +# +CONFIG_LPC43_CODESOURCERYW=n +CONFIG_LPC43_CODESOURCERYL=y +CONFIG_LPC43_DEVKITARM=n +CONFIG_LPC43_BUILDROOT=n + +# +# Individual subsystems can be enabled: +# +# Individual subsystems can be enabled: +# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) +CONFIG_LPC43_ETHERNET=n +CONFIG_LPC43_USBHOST=n +CONFIG_LPC43_USBOTG=n +CONFIG_LPC43_USBDEV=n +CONFIG_LPC43_UART0=y +CONFIG_LPC43_UART1=n +CONFIG_LPC43_UART2=n +CONFIG_LPC43_UART3=n +CONFIG_LPC43_CAN1=n +CONFIG_LPC43_CAN2=n +CONFIG_LPC43_SPI=n +CONFIG_LPC43_SSP0=y +CONFIG_LPC43_SSP1=n +CONFIG_LPC43_I2C0=n +CONFIG_LPC43_I2C1=n +CONFIG_LPC43_I2S=n +CONFIG_LPC43_TMR0=n +CONFIG_LPC43_TMR1=n +CONFIG_LPC43_TMR2=n +CONFIG_LPC43_TMR3=n +CONFIG_LPC43_RIT=n +CONFIG_LPC43_PWM=n +CONFIG_LPC43_MCPWM=n +CONFIG_LPC43_QEI=n +CONFIG_LPC43_RTC=n +CONFIG_LPC43_WDT=n +CONFIG_LPC43_ADC=n +CONFIG_LPC43_DAC=n +CONFIG_LPC43_GPDMA=n + +# +# LPC43xx specific serial device driver settings +# +# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the +# console and ttys0 (default is the UART1). +# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_UARTn_2STOP - Two stop bits +# +CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_UART1_SERIAL_CONSOLE=n +CONFIG_UART2_SERIAL_CONSOLE=n +CONFIG_UART3_SERIAL_CONSOLE=n + +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART2_TXBUFSIZE=256 +CONFIG_UART3_TXBUFSIZE=256 + +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART2_RXBUFSIZE=256 +CONFIG_UART3_RXBUFSIZE=256 + +CONFIG_UART0_BAUD=115200 +CONFIG_UART2_BAUD=115200 +CONFIG_UART3_BAUD=115200 +CONFIG_UART1_BAUD=115200 + +CONFIG_UART0_BITS=8 +CONFIG_UART1_BITS=8 +CONFIG_UART2_BITS=8 +CONFIG_UART3_BITS=8 + +CONFIG_UART0_PARITY=0 +CONFIG_UART1_PARITY=0 +CONFIG_UART2_PARITY=0 +CONFIG_UART3_PARITY=0 + +CONFIG_UART0_2STOP=0 +CONFIG_UART1_2STOP=0 +CONFIG_UART2_2STOP=0 +CONFIG_UART3_2STOP=0 + +# +# LPC43xx specific PHY/Ethernet device driver settings +# +# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY +# CONFIG_PHY_AUTONEG - Enable auto-negotion +# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. +# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex +# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb +# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 +# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 +# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is +# the higest priority. +# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). +# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs +# CONFIG_DEBUG. +# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. +# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. +# Automatically set if CONFIG_NET_IGMP is selected. +# +CONFIG_PHY_KS8721=y +CONFIG_PHY_AUTONEG=y +CONFIG_PHY_SPEED100=n +CONFIG_PHY_FDUPLEX=y + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=n +CONFIG_MM_REGIONS=2 +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=0 +CONFIG_START_YEAR=2010 +CONFIG_START_MONTH=6 +CONFIG_START_DAY=20 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=n +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=n +CONFIG_FDCLONE_STDIO=n +CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=(50*1000) +CONFIG_SCHED_WORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=4 + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=n +CONFIG_DISABLE_PTHREAD=n +CONFIG_DISABLE_SIGNALS=n +CONFIG_DISABLE_MQUEUE=n +CONFIG_DISABLE_MOUNTPOINT=n +CONFIG_DISABLE_ENVIRON=n +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Filesystem configuration +# +# CONFIG_FS_FAT - Enable FAT filesystem support +# CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FS_ROMFS - Enable ROMFS filesystem support +CONFIG_FS_FAT=y +CONFIG_FS_ROMFS=n + +# +# SPI-based MMC/SD driver +# +# CONFIG_MMCSD_NSLOTS +# Number of MMC/SD slots supported by the driver +# CONFIG_MMCSD_READONLY +# Provide read-only access (default is read/write) +# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. +# Default is 20MHz. +# +CONFIG_MMCSD_NSLOTS=1 +CONFIG_MMCSD_READONLY=n +CONFIG_MMCSD_SPICLOCK=12500000 + +# +# Block driver buffering +# +# CONFIG_FS_READAHEAD +# Enable read-ahead buffering +# CONFIG_FS_WRITEBUFFER +# Enable write buffering +# +CONFIG_FS_READAHEAD=n +CONFIG_FS_WRITEBUFFER=n + +# +# SDIO-based MMC/SD driver +# +# CONFIG_SDIO_DMA +# SDIO driver supports DMA +# CONFIG_MMCSD_MMCSUPPORT +# Enable support for MMC cards +# CONFIG_MMCSD_HAVECARDDETECT +# SDIO driver card detection is 100% accurate +# +CONFIG_SDIO_DMA=n +CONFIG_MMCSD_MMCSUPPORT=n +CONFIG_MMCSD_HAVECARDDETECT=n + +# +# TCP/IP and UDP support via uIP +# CONFIG_NET - Enable or disable all network features +# CONFIG_NET_IPv6 - Build in support for IPv6 +# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. +# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options +# CONFIG_NET_BUFSIZE - uIP buffer size +# CONFIG_NET_TCP - TCP support on or off +# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) +# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers +# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) +# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until +# accept() is called. The size of the backlog is selected when listen() is called. +# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) +# CONFIG_NET_UDP - UDP support on or off +# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off +# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections +# CONFIG_NET_ICMP - ICMP ping response support on or off +# CONFIG_NET_ICMP_PING - ICMP ping request support on or off +# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address +# CONFIG_NET_STATISTICS - uIP statistics on or off +# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window +# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table +# CONFIG_NET_BROADCAST - Broadcast support +# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates +# +CONFIG_NET=n +CONFIG_NET_IPv6=n +CONFIG_NSOCKET_DESCRIPTORS=0 +CONFIG_NET_SOCKOPTS=y +CONFIG_NET_BUFSIZE=420 +CONFIG_NET_TCP=n +CONFIG_NET_TCP_CONNS=40 +CONFIG_NET_MAX_LISTENPORTS=40 +CONFIG_NET_UDP=n +CONFIG_NET_UDP_CHECKSUMS=y +#CONFIG_NET_UDP_CONNS=10 +CONFIG_NET_ICMP=n +CONFIG_NET_ICMP_PING=n +#CONFIG_NET_PINGADDRCONF=0 +CONFIG_NET_STATISTICS=y +#CONFIG_NET_RECEIVE_WINDOW= +#CONFIG_NET_ARPTAB_SIZE=8 +CONFIG_NET_BROADCAST=n +#CONFIG_NET_FWCACHE_SIZE=2 + +# +# UIP Network Utilities +# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP +# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries +# +CONFIG_NET_DHCP_LIGHT=n +CONFIG_NET_RESOLV_ENTRIES=4 + +# +# USB Device Configuration +# +# CONFIG_USBDEV +# Enables USB device support +# CONFIG_USBDEV_ISOCHRONOUS +# Build in extra support for isochronous endpoints +# CONFIG_USBDEV_DUALSPEED +# Hardware handles high and full speed operation (USB 2.0) +# CONFIG_USBDEV_SELFPOWERED +# Will cause USB features to indicate that the device is +# self-powered +# CONFIG_USBDEV_MAXPOWER +# Maximum power consumption in mA +# CONFIG_USBDEV_TRACE +# Enables USB tracing for debug +# CONFIG_USBDEV_TRACE_NRECORDS +# Number of trace entries to remember +# +CONFIG_USBDEV=n +CONFIG_USBDEV_ISOCHRONOUS=n +CONFIG_USBDEV_DUALSPEED=n +CONFIG_USBDEV_SELFPOWERED=y +CONFIG_USBDEV_REMOTEWAKEUP=n +CONFIG_USBDEV_MAXPOWER=100 +CONFIG_USBDEV_TRACE=n +CONFIG_USBDEV_TRACE_NRECORDS=128 + +# +# LPC43xx USB Configuration +# +# CONFIG_LPC43_USBDEV_FRAME_INTERRUPT +# Handle USB Start-Of-Frame events. +# Enable reading SOF from interrupt handler vs. simply reading on demand. +# Probably a bad idea... Unless there is some issue with sampling the SOF +# from hardware asynchronously. +# CONFIG_LPC43_USBDEV_EPFAST_INTERRUPT +# Enable high priority interrupts. I have no idea why you might want to +# do that +# CONFIG_LPC43_USBDEV_NDMADESCRIPTORS +# Number of DMA descriptors to allocate in SRAM. +# CONFIG_LPC43_USBDEV_DMA +# Enable lpc43xx-specific DMA support +# +CONFIG_LPC43_USBDEV_FRAME_INTERRUPT=n +CONFIG_LPC43_USBDEV_EPFAST_INTERRUPT=n +CONFIG_LPC43_USBDEV_DMA=n +CONFIG_LPC43_USBDEV_NDMADESCRIPTORS=0 +CONFIG_LPC43_USBDEV_DMAINTMASK=0 + +# +# USB Serial Device Configuration +# +# CONFIG_PL2303 +# Enable compilation of the USB serial driver +# CONFIG_PL2303_EPINTIN +# The logical 7-bit address of a hardware endpoint that supports +# interrupt IN operation +# CONFIG_PL2303_EPBULKOUT +# The logical 7-bit address of a hardware endpoint that supports +# bulk OUT operation +# CONFIG_PL2303_EPBULKIN +# The logical 7-bit address of a hardware endpoint that supports +# bulk IN operation +# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR +# The vendor ID code/string +# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR +# The product ID code/string +# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE +# Size of the serial receive/transmit buffers +# +CONFIG_PL2303=n +CONFIG_PL2303_EPINTIN=1 +CONFIG_PL2303_EPBULKOUT=2 +CONFIG_PL2303_EPBULKIN=5 +CONFIG_PL2303_NWRREQS=4 +CONFIG_PL2303_NRDREQS=4 +CONFIG_PL2303_VENDORID=0x067b +CONFIG_PL2303_PRODUCTID=0x2303 +CONFIG_PL2303_VENDORSTR="Nuttx" +CONFIG_PL2303_PRODUCTSTR="USBdev Serial" +CONFIG_PL2303_RXBUFSIZE=512 +CONFIG_PL2303_TXBUFSIZE=512 + +# +# USB Storage Device Configuration +# +# CONFIG_USBMSC +# Enable compilation of the USB storage driver +# CONFIG_USBMSC_EP0MAXPACKET +# Max packet size for endpoint 0 +# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN +# The logical 7-bit address of a hardware endpoints that support +# bulk OUT and IN operations +# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN +# The size of the buffer in each write/read request. This +# value needs to be at least as large as the endpoint +# maxpacket and ideally as large as a block device sector. +# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR +# The vendor ID code/string +# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR +# The product ID code/string +# CONFIG_USBMSC_REMOVABLE +# Select if the media is removable +# +CONFIG_USBMSC=n +CONFIG_USBMSC_EP0MAXPACKET=64 +CONFIG_USBMSC_EPBULKOUT=2 +CONFIG_USBMSC_EPBULKIN=5 +CONFIG_USBMSC_NRDREQS=2 +CONFIG_USBMSC_NWRREQS=2 +CONFIG_USBMSC_BULKINREQLEN=256 +CONFIG_USBMSC_BULKOUTREQLEN=256 +CONFIG_USBMSC_VENDORID=0x584e +CONFIG_USBMSC_VENDORSTR="NuttX" +CONFIG_USBMSC_PRODUCTID=0x5342 +CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" +CONFIG_USBMSC_VERSIONNO=0x0399 +CONFIG_USBMSC_REMOVABLE=y + +# +# Settings for examples/uip +# +CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLE_UIP_DHCPC=n + +# +# Settings for examples/nettest +CONFIG_EXAMPLE_NETTEST_SERVER=n +CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n +CONFIG_EXAMPLE_NETTEST_NOMAC=n +CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) + +# +# Settings for examples/ostest +# +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# +# If CONFIG_NSH_TELNET is selected: +# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size +# CONFIG_NSH_DHCPC - Obtain address using DHCP +# CONFIG_NSH_IPADDR - Provides static IP address +# CONFIG_NSH_DRIPADDR - Provides static router IP address +# CONFIG_NSH_NETMASK - Provides static network mask +# CONFIG_NSH_NOMAC - Use a bogus MAC address +# +# If CONFIG_NSH_ROMFSETC is selected: +# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint +# CONFIG_NSH_INITSCRIPT - Relative path to init script +# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor +# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size +# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor +# CONFIG_NSH_FATSECTSIZE - FAT FS sector size +# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors +# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint +# +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_STRERROR=n +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_NESTDEPTH=3 +CONFIG_NSH_DISABLESCRIPT=n +CONFIG_NSH_DISABLEBG=n +CONFIG_NSH_ROMFSETC=n +CONFIG_NSH_CONSOLE=y +CONFIG_NSH_TELNET=n +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_IOBUFFER_SIZE=512 +CONFIG_NSH_DHCPC=n +CONFIG_NSH_NOMAC=n +CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_NSH_ROMFSMOUNTPT="/etc" +CONFIG_NSH_INITSCRIPT="init.d/rcS" +CONFIG_NSH_ROMFSDEVNO=0 +CONFIG_NSH_ROMFSSECTSIZE=64 +CONFIG_NSH_FATDEVNO=1 +CONFIG_NSH_FATSECTSIZE=512 +CONFIG_NSH_FATNSECTORS=1024 +CONFIG_NSH_FATMOUNTPT=/tmp + +# +# Architecture-specific NSH options +# +CONFIG_NSH_MMCSDSPIPORTNO=0 +CONFIG_NSH_MMCSDSLOTNO=0 +CONFIG_NSH_MMCSDMINOR=0 + +# +# Settings for examples/usbserial +# +# CONFIG_EXAMPLES_USBSERIAL_INONLY +# Only verify IN (device-to-host) data transfers. Default: both +# CONFIG_EXAMPLES_USBSERIAL_OUTONLY +# Only verify OUT (host-to-device) data transfers. Default: both +# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL +# Send only small, single packet messages. Default: Send large and small. +# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG +# Send only large, multi-packet messages. Default: Send large and small. +# +CONFIG_EXAMPLES_USBSERIAL_INONLY=n +CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n +CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n +CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n + +CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n +CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n +CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n +CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n +CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the LPC43xx which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +#CONFIG_STACK_POINTER +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/lpc4330-xplorer/ostest/setenv.sh b/nuttx/configs/lpc4330-xplorer/ostest/setenv.sh new file mode 100755 index 000000000..3a21a4e94 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/ostest/setenv.sh @@ -0,0 +1,58 @@ +#!/bin/bash +# configs/lpc4330-xplorer/ostest/setenv.sh +# +# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# TOOLCHAIN_BIN must be defined to the full path to the location where you +# have installed the toolchain of your choice. Modify the following: + +export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Andd add the toolchain path to the PATH variable + +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" +echo "PATH : ${PATH}" diff --git a/nuttx/configs/lpc4330-xplorer/scripts/ld.script b/nuttx/configs/lpc4330-xplorer/scripts/ld.script new file mode 100644 index 000000000..5f03b1d7c --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/scripts/ld.script @@ -0,0 +1,110 @@ +/**************************************************************************** + * configs/lpc4330-xplorer/scripts/ld.script + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The LPC4330 on the LPC4330-Xplorer has 4096Kb of SPIFI FLASH beginning at + * address 0x1400:0000 and 264K of total SRAM: 128Kb of SRAM in the CPU block + * beginning at address 0x1000:0000, 72Kb beginning at address 0x1008:0000 and + * 64Kb of AHB SRAM in three banks beginning at addresses 0x2000:0000, + * 0x2000:8000 and 0x2000:C000. Here we assume that .data and .bss will all + * fit into the 128Kb CPU SRAM address range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x1c000000, LENGTH = 1024K + sram (rwx) : ORIGIN = 0x10000000, LENGTH = 96K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + _eronly = ABSOLUTE(.); /* See below */ + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .ARM.extab : { + *(.ARM.extab*) + } >sram + + .ARM.exidx : { + __exidx_start = ABSOLUTE(.); + *(.ARM.exidx*) + __exidx_end = ABSOLUTE(.); + } >sram + + .bss : { /* BSS */ + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/nuttx/configs/lpc4330-xplorer/src/Makefile b/nuttx/configs/lpc4330-xplorer/src/Makefile new file mode 100644 index 000000000..b2541dc26 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/Makefile @@ -0,0 +1,96 @@ +############################################################################ +# configs/lpc4330-xplorer/src/Makefile +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +CSRCS = up_boot.c up_leds.c + +ifeq ($(CONFIG_NSH_ARCHINIT),y) +CSRCS += up_nsh.c +endif + +ifeq ($(CONFIG_USBMSC),y) +CSRCS += up_usbmsc.c +endif + +ifeq ($(CONFIG_ARCH_BUTTONS),y) +CSRCS += up_buttons.c +endif + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $@, $${obj}); \ + done ; ) + +.depend: Makefile $(SRCS) + @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f libboard$(LIBEXT) *~ .*.swp + $(call CLEAN) + +distclean: clean + @rm -f Make.dep .depend + +-include Make.dep diff --git a/nuttx/configs/lpc4330-xplorer/src/lpc4330_xplorer_internal.h b/nuttx/configs/lpc4330-xplorer/src/lpc4330_xplorer_internal.h new file mode 100644 index 000000000..371134a4a --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/lpc4330_xplorer_internal.h @@ -0,0 +1,104 @@ +/**************************************************************************** + * configs/lpc4330-xplorer/src/lpc4330_xplorer_internal.h + * arch/arm/src/board/lpc4330-xplorer_internal.n + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef _CONFIGS_LPC4330_XPLORER_SRC_LPC4330_XPLORER_INTERNAL_H +#define _CONFIGS_LPC4330_XPLORER_SRC_LPC4330_XPLORER_INTERNAL_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/compiler.h> + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/**************************************************************************** + * LEDs GPIO PIN SIGNAL NAME + * -------------------------------- ------- -------------- + * gpio1[12] - LED D2 J10-20 LED1 + * gpio1[11] - LED D3 J10-17 LED2 + ****************************************************************************/ + +#define LPC4330_XPLORER_LED1 (GPIO_OUTPUT | GPIO_PORT1 | GPIO_PIN12) +#define LPC4330_XPLORER_LED1_OFF LPC4330_XPLORER_LED1 +#define LPC4330_XPLORER_LED1_ON (LPC4330_XPLORER_LED1 | GPIO_VALUE_ONE) +#define LPC4330_XPLORER_LED2 (GPIO_OUTPUT | GPIO_PORT1 | GPIO_PIN11) +#define LPC4330_XPLORER_LED2_OFF LPC4330_XPLORER_LED2 +#define LPC4330_XPLORER_LED2_ON (LPC4330_XPLORER_LED2 | GPIO_VALUE_ONE) + +#define LPC4330_XPLORER_HEARTBEAT LPC4330_XPLORER_LED2 + +/**************************************************************************** + * Buttons GPIO PIN SIGNAL NAME + * -------------------------------- ------- -------------- + * gpio0[7] - User Button SW2 J8-25 BTN1 + ****************************************************************************/ + +#define LPC4330_XPLORER_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN7) + +/* Button IRQ numbers */ + +#define LPC4330_XPLORER_BUT1_IRQ LPC43_IRQ_P0p23 + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * Public data + ****************************************************************************/ + +#ifndef __ASSEMBLY__ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc43_sspinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the Lincoln 80 board. + * + ****************************************************************************/ + +extern void weak_function lpc43_sspinitialize(void); + +#endif /* __ASSEMBLY__ */ +#endif /* _CONFIGS_LPC4330_XPLORER_SRC_LPC4330_XPLORER_INTERNAL_H */ diff --git a/nuttx/configs/lpc4330-xplorer/src/up_boot.c b/nuttx/configs/lpc4330-xplorer/src/up_boot.c new file mode 100644 index 000000000..4543d036c --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/up_boot.c @@ -0,0 +1,82 @@ +/************************************************************************************ + * configs/lpc4330-xplorer/src/up_boot.c + * arch/arm/src/board/up_boot.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <debug.h> + +#include <arch/board/board.h> + +#include "up_arch.h" +#include "up_internal.h" + +#include "lpc43_internal.h" +#include "lpc4330_xplorer_internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc43_boardinitialize + * + * Description: + * All LPC43xx architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void lpc43_boardinitialize(void) +{ + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif +} diff --git a/nuttx/configs/lpc4330-xplorer/src/up_buttons.c b/nuttx/configs/lpc4330-xplorer/src/up_buttons.c new file mode 100644 index 000000000..6878c8203 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/up_buttons.c @@ -0,0 +1,225 @@ +/**************************************************************************** + * configs/lpc4330-xplorer/src/up_buttons.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdbool.h> + +#include <nuttx/arch.h> +#include <nuttx/irq.h> + +#include <arch/board/board.h> + +#include "lpc43_internal.h" +#include "lpc4330_xplorer_internal.h" + +#ifdef CONFIG_ARCH_BUTTONS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* Pin configuration for each STM3210E-EVAL button. This array is indexed by + * the BUTTON_* and JOYSTICK_* definitions in board.h + */ + +static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] = +{ + LPC4330_XPLORER_BUT1 +}; + +/* This array defines all of the interupt handlers current attached to + * button events. + */ + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +static xcpt_t g_buttonisr[BOARD_NUM_BUTTONS]; + +/* This array provides the mapping from button ID numbers to button IRQ + * numbers. + */ + +static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] = +{ + LPC4330_XPLORER_BUT1_IRQ +}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_buttoninit + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons or up_irqbutton() may be called to register button interrupt + * handlers. + * + ****************************************************************************/ + +void up_buttoninit(void) +{ + int i; + + /* Configure the GPIO pins as interrupting inputs. */ + + for (i = 0; i < BOARD_NUM_BUTTONS; i++) + { + lpc43_configgpio(g_buttoncfg[i]); + } +} + +/**************************************************************************** + * Name: up_buttons + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons. + * + * up_buttons() may be called at any time to harvest the state of every + * button. The state of the buttons is returned as a bitset with one + * bit corresponding to each button: If the bit is set, then the button + * is pressed. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT + * definitions in board.h for the meaning of each bit. + * + ****************************************************************************/ + +uint8_t up_buttons(void) +{ + uint8_t ret = 0; + int i; + + /* Check that state of each key */ + + for (i = 0; i < BOARD_NUM_BUTTONS; i++) + { + /* A LOW value means that the key is pressed. */ + + bool released = lpc43_gpioread(g_buttoncfg[i]); + + /* Accumulate the set of depressed (not released) keys */ + + if (!released) + { + ret |= (1 << i); + } + } + + return ret; +} + +/**************************************************************************** + * Button support. + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_irqbutton() may be called to register button interrupt handlers. + * + * up_irqbutton() may be called to register an interrupt handler that will + * be called when a button is depressed or released. The ID value is a + * button enumeration value that uniquely identifies a button resource. See the + * BOARD_BUTTON_* and BOARD_JOYSTICK_* definitions in board.h for the meaning + * of enumeration values. The previous interrupt handler address is returned + * (so that it may restored, if so desired). + * + * Note that up_irqbutton() also enables button interrupts. Button + * interrupts will remain enabled after the interrupt handler is attached. + * Interrupts may be disabled (and detached) by calling up_irqbutton with + * irqhandler equal to NULL. + * + ****************************************************************************/ + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +xcpt_t up_irqbutton(int id, xcpt_t irqhandler) +{ + xcpt_t oldhandler = NULL; + irqstate_t flags; + int irq; + + /* Verify that the button ID is within range */ + + if ((unsigned)id < BOARD_NUM_BUTTONS) + { + /* Return the current button handler and set the new interrupt handler */ + + oldhandler = g_buttonisr[id]; + g_buttonisr[id] = irqhandler; + + /* Disable interrupts until we are done */ + + flags = irqsave(); + + /* Configure the interrupt. Either attach and enable the new + * interrupt or disable and detach the old interrupt handler. + */ + + irq = g_buttonirq[id]; + if (irqhandler) + { + /* Attach then enable the new interrupt handler */ + + (void)irq_attach(irq, irqhandler); + up_enable_irq(irq); + } + else + { + /* Disable then then detach the the old interrupt handler */ + + up_disable_irq(irq); + (void)irq_detach(irq); + } + irqrestore(flags); + } + return oldhandler; +} +#endif + +#endif /* CONFIG_ARCH_BUTTONS */ diff --git a/nuttx/configs/lpc4330-xplorer/src/up_leds.c b/nuttx/configs/lpc4330-xplorer/src/up_leds.c new file mode 100644 index 000000000..e6350d6ed --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/up_leds.c @@ -0,0 +1,219 @@ +/**************************************************************************** + * configs/lpc4330-xplorer/src/up_leds.c + * arch/arm/src/board/up_leds.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdbool.h> +#include <debug.h> + +#include <arch/board/board.h> + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" + +#include "lpc43_internal.h" + +#include "lpc4330_xplorer_internal.h" + +#ifdef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG with + * CONFIG_DEBUG_VERBOSE too) + */ + +#undef LED_DEBUG /* Define to enable debug */ +#undef LED_VERBOSE /* Define to enable verbose debug */ + +#ifdef LED_DEBUG +# define leddbg lldbg +# ifdef LED_VERBOSE +# define ledvdbg lldbg +# else +# define ledvdbg(x...) +# endif +#else +# undef LED_VERBOSE +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/* Dump GPIO registers */ + +#ifdef LED_VERBOSE +# define led_dumpgpio(m) lpc43_dumpgpio(LPC4330_XPLORER_LED2, m) +#else +# define led_dumpgpio(m) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/* LED definitions ****************************************************************** + +The LPC4330-Xplorer has 2 LEDs along the bottom of the board. Green or off. +If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows for NuttX +debug functionality (where NC means "No Change"). + +During the boot phases. LED1 and LED2 will show boot status. + + LED1 LED2 +STARTED OFF OFF +HEAPALLOCATE BLUE OFF +IRQSENABLED OFF BLUE +STACKCREATED OFF OFF + +After the system is booted, this logic will no longer use LEDs 1 & 2. They +are available for use by applications using lpc43_led (prototyped below) +*/ + +static bool g_initialized; +static int g_nestcount; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_ledinit + ****************************************************************************/ + +void up_ledinit(void) +{ + /* Configure all LED GPIO lines */ + + led_dumpgpio("up_ledinit() Entry)"); + + lpc43_configgpio(LPC4330_XPLORER_LED1); + lpc43_configgpio(LPC4330_XPLORER_LED2); + + led_dumpgpio("up_ledinit() Exit"); +} + +/**************************************************************************** + * Name: up_ledon + ****************************************************************************/ + +void up_ledon(int led) +{ + /* We will control LED1 and LED2 not yet completed the boot sequence. */ + + if (!g_initialized) + { + int led1 = 0; + int led2 = 0; + switch (led) + { + case LED_STACKCREATED: + g_initialized = true; + case LED_STARTED: + default: + break; + + case LED_HEAPALLOCATE: + led1 = 1; + break; + + case LED_IRQSENABLED: + led2 = 1; + } + lpc43_led(LPC4330_XPLORER_LED1,led1); + lpc43_led(LPC4330_XPLORER_LED2,led2); + } + + /* We will always control the HB LED */ + + switch (led) + { + case LED_INIRQ: + case LED_SIGNAL: + case LED_ASSERTION: + case LED_PANIC: + lpc43_gpiowrite(LPC4330_XPLORER_HEARTBEAT, false); + g_nestcount++; + + default: + break; + } +} + +/**************************************************************************** + * Name: up_ledoff + ****************************************************************************/ + +void up_ledoff(int led) +{ + /* In all states, OFF can only mean turning off the HB LED */ + + if (g_nestcount <= 1) + { + lpc43_led(LPC4330_XPLORER_HEARTBEAT, true); + g_nestcount = 0; + } + else + { + g_nestcount--; + } +} + +/************************************************************************************ + * Name: lpc43_led + * + * Description: + * Once the system has booted, these functions can be used to control the LEDs + * + ************************************************************************************/ + +void lpc43_led(int lednum, int state) + +{ + lpc43_gpiowrite(lednum, state); +} +#endif /* CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/lpc4330-xplorer/src/up_nsh.c b/nuttx/configs/lpc4330-xplorer/src/up_nsh.c new file mode 100644 index 000000000..98387dfe1 --- /dev/null +++ b/nuttx/configs/lpc4330-xplorer/src/up_nsh.c @@ -0,0 +1,102 @@ +/**************************************************************************** + * config/lpc4330-xplorer/src/up_nsh.c + * arch/arm/src/board/up_nsh.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdio.h> +#include <debug.h> +#include <errno.h> + +#include <nuttx/spi.h> +#include <nuttx/mmcsd.h> + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* PORT and SLOT number probably depend on the board configuration */ + +#ifdef CONFIG_ARCH_BOARD_LPC4330_XPLORER +# define CONFIG_NSH_HAVEUSBDEV 1 +#else +# error "Unrecognized board" +# undef CONFIG_NSH_HAVEUSBDEV +#endif + +/* Can't support USB features if USB is not enabled */ + +#ifndef CONFIG_USBDEV +# undef CONFIG_NSH_HAVEUSBDEV +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lib_lowprintf(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lib_lowprintf +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int nsh_archinitialize(void) +{ + return OK; +} |