diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-03-15 20:53:42 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-03-15 20:53:42 +0000 |
commit | 646e343fe6bb56f5a8898265b858c0833a3a0bb4 (patch) | |
tree | f5c4f7d95213f1d64e9e884960daba619d935d0a | |
parent | 36184d99268d85c80d89cc13a6f95419bd4090dc (diff) | |
download | nuttx-646e343fe6bb56f5a8898265b858c0833a3a0bb4.tar.gz nuttx-646e343fe6bb56f5a8898265b858c0833a3a0bb4.tar.bz2 nuttx-646e343fe6bb56f5a8898265b858c0833a3a0bb4.zip |
Updates to PIC32 USB stall logic -- still doesn't work right
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4491 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_spi.c | 48 | ||||
-rw-r--r-- | nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c | 183 |
2 files changed, 128 insertions, 103 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_spi.c b/nuttx/arch/arm/src/stm32/stm32_spi.c index efe04e391..6386d0d58 100644 --- a/nuttx/arch/arm/src/stm32/stm32_spi.c +++ b/nuttx/arch/arm/src/stm32/stm32_spi.c @@ -1,7 +1,7 @@ /************************************************************************************ * arm/arm/src/stm32/stm32_spi.c * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -87,7 +87,6 @@ /************************************************************************************ * Definitions ************************************************************************************/ - /* Configuration ********************************************************************/ #ifdef CONFIG_STM32_SPI_INTERRUPTS @@ -111,6 +110,26 @@ #define SPI_TXDMA16NULL_CONFIG (SPI_DMA_PRIO|DMA_CCR_MSIZE_8BITS |DMA_CCR_PSIZE_16BITS |DMA_CCR_DIR) #define SPI_TXDMA8NULL_CONFIG (SPI_DMA_PRIO|DMA_CCR_MSIZE_8BITS |DMA_CCR_PSIZE_8BITS |DMA_CCR_DIR) +/* Debug ****************************************************************************/ +/* Check if (non-standard) SPI debug is enabled */ + +#ifndef CONFIG_DEBUG +# undef CONFIG_DEBUG_VERBOSE +# undef CONFIG_DEBUG_SPI +#endif + +#ifdef CONFIG_DEBUG_SPI +# define spidbg lldbg +# ifdef CONFIG_DEBUG_VERBOSE +# define spivdbg lldbg +# else +# define spivdbg(x...) +# endif +#else +# define spidbg(x...) +# define spivdbg(x...) +#endif + /************************************************************************************ * Private Types ************************************************************************************/ @@ -764,8 +783,8 @@ static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency) if (frequency > STM32_SPI_CLK_MAX) { - frequency = STM32_SPI_CLK_MAX; - } + frequency = STM32_SPI_CLK_MAX; + } /* Has the frequency changed? */ @@ -838,6 +857,8 @@ static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency) * faster. */ + spivdbg("Frequency %d->%d\n", frequency, actual); + #ifndef CONFIG_SPI_OWNBUS priv->frequency = frequency; priv->actual = actual; @@ -869,6 +890,8 @@ static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode) uint16_t setbits; uint16_t clrbits; + spivdbg("mode=%d\n", mode); + /* Has the mode changed? */ #ifndef CONFIG_SPI_OWNBUS @@ -934,6 +957,8 @@ static void spi_setbits(FAR struct spi_dev_s *dev, int nbits) uint16_t setbits; uint16_t clrbits; + spivdbg("nbits=%d\n", nbits); + /* Has the number of bits changed? */ #ifndef CONFIG_SPI_OWNBUS @@ -987,11 +1012,15 @@ static void spi_setbits(FAR struct spi_dev_s *dev, int nbits) static uint16_t spi_send(FAR struct spi_dev_s *dev, uint16_t wd) { FAR struct stm32_spidev_s *priv = (FAR struct stm32_spidev_s *)dev; + uint16_t ret; DEBUGASSERT(priv && priv->spibase); spi_writeword(priv, wd); - return spi_readword(priv); + ret = spi_readword(priv); + + spivdbg("Sent: %04x Return: %04x\n", wd, ret); + return ret; } /************************************************************************* @@ -1021,6 +1050,8 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer, FAR struct stm32_spidev_s *priv = (FAR struct stm32_spidev_s *)dev; DEBUGASSERT(priv && priv->spibase); + spivdbg("txbuffer=%p rxbuffer=%p nwords=%d\n", txbuffer, rxbuffer, nwords); + /* 8- or 16-bit mode? */ if (spi_16bitmode(priv)) @@ -1041,7 +1072,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer, } else { - word = 0xffff; + word = 0xffff; } /* Exchange one word */ @@ -1074,7 +1105,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer, } else { - word = 0xff; + word = 0xff; } /* Exchange one word */ @@ -1120,6 +1151,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer, uint16_t rxdummy = 0xffff; uint16_t txdummy; + spivdbg("txbuffer=%p rxbuffer=%p nwords=%d\n", txbuffer, rxbuffer, nwords); DEBUGASSERT(priv && priv->spibase); /* Setup DMAs */ @@ -1161,6 +1193,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer, #ifndef CONFIG_SPI_EXCHANGE static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *txbuffer, size_t nwords) { + spivdbg("txbuffer=%p nwords=%d\n", txbuffer, nwords); return spi_exchange(dev, txbuffer, NULL, nwords); } #endif @@ -1187,6 +1220,7 @@ static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *txbuffer, si #ifndef CONFIG_SPI_EXCHANGE static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *rxbuffer, size_t nwords) { + spivdbg("rxbuffer=%p nwords=%d\n", rxbuffer, nwords); return spi_exchange(dev, NULL, rxbuffer, nwords); } #endif diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c b/nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c index a4261a6a2..b0a73dc20 100644 --- a/nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c +++ b/nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c @@ -132,12 +132,12 @@ #define EP0_OUT_ODD (1) #define EP0_IN_EVEN (2) #define EP0_IN_ODD (3) -#define EP_OUT_EVEN(ep) ((ep) << 2) -#define EP_OUT_ODD(ep) (((ep) << 2) + 1) -#define EP_IN_EVEN(ep) (((ep) << 2) + 2) -#define EP_IN_ODD(ep) (((ep) << 2) + 3) +#define EP_OUT_EVEN(ep) ((int)(ep) << 2) +#define EP_OUT_ODD(ep) (((int)(ep) << 2) + 1) +#define EP_IN_EVEN(ep) (((int)(ep) << 2) + 2) +#define EP_IN_ODD(ep) (((int)(ep) << 2) + 3) -#define EP(ep,dir,pp) (((ep) << 2) + ((dir) << 1) + (pp)) +#define EP(ep,dir,pp) (((int)(ep) << 2) + ((int)(dir) << 1) + (int)(pp)) #define EP_DIR_OUT 0 #define EP_DIR_IN 1 #define EP_PP_EVEN 0 @@ -510,8 +510,7 @@ static int pic32mx_epsubmit(struct usbdev_ep_s *ep, struct usbdev_req_s *req); static int pic32mx_epcancel(struct usbdev_ep_s *ep, struct usbdev_req_s *req); -static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, - volatile struct usbotg_bdtentry_s *bdt, bool resume, +static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, bool resume, bool epin); static int pic32mx_epstall(struct usbdev_ep_s *ep, bool resume); @@ -1579,26 +1578,7 @@ static void pic32mx_ep0stall(struct pic32mx_usbdev_s *priv) regval = pic32mx_getreg(PIC32MX_USB_EP0); if ((regval & USB_EP_EPSTALL) != 0) { - /* Check if we own the BDTs. All BDs of endpoint zero should be owned by - * the USB. Check anyway. - */ - - struct pic32mx_ep_s *ep0 = &priv->eplist[EP0]; - - if ((ep0->bdtout->status & USB_BDT_UOWN) != 0 && - (ep0->bdtin->status & (USB_BDT_UOWN | USB_BDT_BSTALL)) == (USB_BDT_UOWN | USB_BDT_BSTALL)) - { - /* Set ep0 BDT status to stall also */ - - uint32_t status = (USB_BDT_UOWN| USB_BDT_DATA0 | USB_BDT_DTS | USB_BDT_BSTALL); - - bdtdbg("EP0 BDT OUT [%p] {%08x, %08x}\n", - ep0->bdtout, status, ep0->bdtout->addr); - - ep0->bdtout->status = status; - } - - /* Then clear the EP0 stall status */ + /* If so, clear the EP0 stall status */ regval &= ~USB_EP_EPSTALL; pic32mx_putreg(regval, PIC32MX_USB_EP0); @@ -1762,20 +1742,6 @@ static void pic32mx_ep0setup(struct pic32mx_usbdev_s *priv) ep0 = &priv->eplist[EP0]; pic32mx_cancelrequests(ep0, -EPROTO); - /* Check if the USB currently owns the buffer */ - - if ((ep0->bdtin->status & USB_BDT_UOWN) != 0) - { - /* Yes.. give control back to the CPU. This handles for the - * ownership after a stall. - */ - - bdtdbg("EP0 BDT IN [%p] {%08x, %08x}\n", - ep0->bdtin, ep0->bdtin->status, ep0->bdtin->addr); - - ep0->bdtin->status &= ~USB_BDT_UOWN; - } - /* Assume NOT stalled; no TX in progress; no RX overrun. Data 0/1 toggling * is not used on SETUP packets, but any following EP0 IN transfer should * beginning with DATA1. @@ -1923,7 +1889,7 @@ static void pic32mx_ep0setup(struct pic32mx_usbdev_s *priv) */ usbtrace(TRACE_INTDECODE(PIC32MX_TRACEINTID_CLEARFEATURE), priv->ctrl.type); - if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_DEVICE) + if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) { /* Disable B device from performing HNP */ @@ -1983,9 +1949,7 @@ static void pic32mx_ep0setup(struct pic32mx_usbdev_s *priv) } else { - /* Let the class implementation handle all other recipients (except for the - * endpoint recipient) - */ + /* Let the class implementation handle all other recipients. */ pic32mx_dispatchrequest(priv); dispatched = true; @@ -3346,13 +3310,11 @@ static int pic32mx_epcancel(struct usbdev_ep_s *ep, struct usbdev_req_s *req) * Name: pic32mx_epbdtstall ****************************************************************************/ -static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, - volatile struct usbotg_bdtentry_s *bdt, - bool resume, bool epin) +static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, bool resume, bool epin) { struct pic32mx_ep_s *privep; struct pic32mx_usbdev_s *priv; - uint32_t status; + volatile struct usbotg_bdtentry_s *bdt; uint32_t regaddr; uint16_t regval; uint8_t epno; @@ -3363,6 +3325,32 @@ static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, priv = (struct pic32mx_usbdev_s *)privep->dev; epno = USB_EPNO(ep->eplog); + /* Check for an IN endpoint */ + + if (epin) + { + /* Get the even BDT */ + + bdt = &g_bdt[EP(epno, EP_DIR_IN, EP_PP_EVEN)]; + + /* Reset the data toggle */ + + privep->txdata1 = false; + } + + /* Otherwise it is an an OUT endpoint. */ + + else + { + /* Get the even BDT */ + + bdt = &g_bdt[EP(epno, EP_DIR_OUT, EP_PP_EVEN)]; + + /* Reset the data toggle */ + + privep->rxdata1 = false; + } + /* Handle the resume condition */ if (resume) @@ -3378,47 +3366,56 @@ static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, /* Clear the STALL bit in the UEP register */ - regval = pic32mx_getreg(regaddr); + regval = pic32mx_getreg(regaddr); regval &= ~USB_EP_EPSTALL; pic32mx_putreg(regval, regaddr); - /* Check for an IN endpoint */ + /* Check for the EP0 OUT endpoint. This is a special case because we + * need to set it up to receive the next setup packet (Hmmm... what + * if there are queued outgoing reponses. We need to revisit this.) + */ - if (USB_ISEPIN(ep->eplog)) + if (epno == 0 && !epin) { - /* If the endpoint is an IN endpoint then we need to return it - * to the CPU and reset the DTS bit so that the next transfer - * is correct - */ + uint32_t bytecount = (USB_SIZEOF_CTRLREQ << USB_BDT_BYTECOUNT_SHIFT); + uint32_t physaddr = PHYS_ADDR(&priv->ctrl); - status = bdt->status; - status |= USB_BDT_UOWN; + /* Configure the EVEN BDT to receive a SETUP command. */ - /* Then give the BDT to the USB */ + bdt->addr = (uint8_t*)physaddr; + bdt->status = (USB_BDT_UOWN | bytecount); + bdtdbg("EP0 BDT IN [%p] {%08x, %08x}\n", + bdt, bdt->status, bdt->addr); - bdtdbg("EP%d BDT OUT [%p] {%08x, %08x}\n", epno, bdt, status, bdt->addr); - bdt->status = status; + /* Configure the ODD BDT to receive a SETUP command. */ + + bdt++; + bdt->addr = (uint8_t*)physaddr; + bdt->status = (USB_BDT_UOWN | bytecount); + bdtdbg("EP0 BDT IN [%p] {%08x, %08x}\n", + bdt, bdt->status, bdt->addr); } else { - /* If the endpoint was an OUT endpoint then we need to give - * control of the endpoint back to the USB so that the - * function driver can receive the data as they expected. - */ + /* Return the EVEN BDT to the CPU. */ - status = bdt->status; - status |= USB_BDT_UOWN; + bdt->addr = 0; + bdt->status = 0; + bdtdbg("EP%d BDT %s [%p] {%08x, %08x}\n", + epno, epin ? "IN" : "OUT", bdt, bdt->status, bdt->addr); - /* Then give the BDT to the USB */ + /* Return the ODD BDT to the CPU. */ - bdtdbg("EP%d BDT OUT [%p] {%08x, %08x}\n", epno, bdt, status, bdt->addr); + bdt++; + bdt->addr = 0; + bdt->status = 0; + bdtdbg("EP%d BDT %s [%p] {%08x, %08x}\n", + epno, epin ? "IN" : "OUT", bdt, bdt->status, bdt->addr); - bdt->status = status; - } + /* Restart any queued requests */ - /* Restart any queued requests */ - - pic32mx_rqrestart(priv, privep); + pic32mx_rqrestart(priv, privep); + } } /* Handle the stall condition */ @@ -3428,22 +3425,22 @@ static int pic32mx_epbdtstall(struct usbdev_ep_s *ep, usbtrace(TRACE_EPSTALL, epno); privep->stalled = true; - /* Point to the appropriate EP register */ + /* Stall the EVEN BDT. */ - regaddr = PIC32MX_USB_EP(epno); - - /* Then STALL the endpoint */ - - status = bdt->status & ~(USB_BDT_BYTECOUNT_MASK | USB_BDT_DATA01); - status |= (USB_BDT_UOWN | USB_BDT_DATA0 | USB_BDT_DTS | USB_BDT_BSTALL); + bdt->status = (USB_BDT_UOWN | USB_BDT_BSTALL); + bdt->addr = 0; + bdtdbg("EP%d BDT %s [%p] {%08x, %08x}\n", + epno, epin ? "IN" : "OUT", bdt, bdt->status, bdt->addr); - /* And give the BDT to the USB */ + /* Stall the ODD BDT. */ - bdtdbg("EP%d BDT OUT [%p] {%08x, %08x}\n", epno, bdt, status, bdt->addr); + bdt++; + bdt->status = (USB_BDT_UOWN | USB_BDT_BSTALL); + bdt->addr = 0; + bdtdbg("EP%d BDT %s [%p] {%08x, %08x}\n", + epno, epin ? "IN" : "OUT", bdt, bdt->status, bdt->addr); - bdt->status = status; - - /* Stop any queued requests */ + /* Stop any queued requests. Hmmm.. is there a race condition here? */ pic32mx_rqstop(privep); } @@ -3483,10 +3480,10 @@ static int pic32mx_epstall(struct usbdev_ep_s *ep, bool resume) if (USB_EPNO(ep->eplog) == 0) { - ret = pic32mx_epbdtstall(ep, privep->bdtin, resume, true); + ret = pic32mx_epbdtstall(ep, resume, true); if (ret == OK) { - ret = pic32mx_epbdtstall(ep, privep->bdtout, resume, false); + ret = pic32mx_epbdtstall(ep, resume, false); } /* Set the EP0 control state appropriately */ @@ -3496,17 +3493,11 @@ static int pic32mx_epstall(struct usbdev_ep_s *ep, bool resume) /* Otherwise, select the BDT for the endpoint direction */ - else if (USB_ISEPIN(ep->eplog)) - { - /* It is an IN endpoint */ - - ret = pic32mx_epbdtstall(ep, privep->bdtin, resume, true); - } else { - /* It is an OUT endpoint */ + /* It is a unidirectional endpoint */ - ret = pic32mx_epbdtstall(ep, privep->bdtout, resume, false); + ret = pic32mx_epbdtstall(ep, resume, USB_ISEPIN(ep->eplog)); } irqrestore(flags); |