configs/stm3240g-eval/nsh2 converted to use the kconfig-frontends tools

5 files changed, 925 insertions, 634 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 1e4d5a0d7..086dbf9aa 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -6695,4 +6695,6 @@
 	* configs/*/ostest:  Removed most OS test configurations (except in a few
 	  cases where there wass some good argument to retain the ostest
 	  configuration) (2014-2-28)
-
+	* configurations (2014-2-28).
+        * configs/stm3240g-eval/nsh2: Configuration converted to use the
+          kconfig-frontends tools (2014-3-1).
diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt
index 8b2346c5f..de6883cec 100644
--- a/nuttx/configs/stm3240g-eval/README.txt
+++ b/nuttx/configs/stm3240g-eval/README.txt
@@ -1097,6 +1097,7 @@ Where <subdir> is one of the following:
     CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
 
     NOTES:
+
     1. This configuration uses the mconf-based configuration tool.  To
        change this configurations using that tool, you should:
 
@@ -1334,19 +1335,29 @@ Where <subdir> is one of the following:
     curious.
 
     NOTES:
-    1. See the notes for the nsh configuration.  Most also apply to the nsh2
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configurations using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. See the notes for the nsh configuration.  Most also apply to the nsh2
        configuration.  Like the nsh configuration, this configuration can
        be modified to support a variety of additional tests.
 
-    2. RS-232 is disabled, but Telnet is still available for use as a console.
+    3. RS-232 is disabled, but Telnet is still available for use as a console.
        Since RS-232 and SDIO use the same pins (one controlled by JP22), RS232
        and SDIO cannot be used concurrently.
 
-    3. This configuration requires that jumper JP22 be set to enable SDIO
+    4. This configuration requires that jumper JP22 be set to enable SDIO
        operation.  To enable MicroSD Card, which shares same I/Os with RS-232,
        JP22 is not fitted.
 
-    4. In order to use SDIO without overruns, DMA must be used.  The STM32 F4
+    5. In order to use SDIO without overruns, DMA must be used.  The STM32 F4
        has 192Kb of SRAM in two banks:  112Kb of "system" SRAM located at
        0x2000:0000 and 64Kb of "CCM" SRAM located at 0x1000:0000. It appears
        that you cannot perform DMA from CCM SRAM.  The work around that I have now
@@ -1358,7 +1369,7 @@ Where <subdir> is one of the following:
        Then DMA works fine. The downside is, of course, is that we lose 64Kb
        of precious SRAM.
 
-    5. Another SDIO/DMA issue.  This one is probably a software bug.  This is
+    6. Another SDIO/DMA issue.  This one is probably a software bug.  This is
        the bug as stated in the TODO list:
 
        "If you use a large I/O buffer to access the file system, then the
@@ -1369,7 +1380,7 @@ Where <subdir> is one of the following:
        For this reason, CONFIG_MMCSD_MULTIBLOCK_DISABLE=y appears in the defconfig
        file.
 
-    6. Another DMA-related concern.  I see this statement in the reference
+    7. Another DMA-related concern.  I see this statement in the reference
        manual:  "The burst configuration has to be selected in order to respect
        the AHB protocol, where bursts must not cross the 1 KB address boundary
        because the minimum address space that can be allocated to a single slave
diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig
index 8d64f96b2..55f802e30 100644
--- a/nuttx/configs/stm3240g-eval/nsh/defconfig
+++ b/nuttx/configs/stm3240g-eval/nsh/defconfig
@@ -519,11 +519,11 @@ CONFIG_NETDEVICES=y
 #
 # External Ethernet PHY Device Support
 #
-CONFIG_ETH0_PHY_NONE=y
+# CONFIG_ETH0_PHY_NONE is not set
 # CONFIG_ETH0_PHY_KS8721 is not set
 # CONFIG_ETH0_PHY_KSZ8051 is not set
 # CONFIG_ETH0_PHY_KSZ90x1 is not set
-# CONFIG_ETH0_PHY_DP83848C is not set
+CONFIG_ETH0_PHY_DP83848C=y
 # CONFIG_ETH0_PHY_LAN8720 is not set
 # CONFIG_ETH0_PHY_DM9161 is not set
 # CONFIG_PIPES is not set
diff --git a/nuttx/configs/stm3240g-eval/nsh2/appconfig b/nuttx/configs/stm3240g-eval/nsh2/appconfig
deleted file mode 100644
index e44a5e5da..000000000
--- a/nuttx/configs/stm3240g-eval/nsh2/appconfig
+++ /dev/null
@@ -1,89 +0,0 @@
-############################################################################
-# configs/stm3240g-eval/nsh2/appconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-# The NSH application library
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-# Networking libraries.
-# Uncomment netutils/ftpc to include an FTP client library
-# Uncomment netutils/ftpd to include an FTP server library
-
-ifeq ($(CONFIG_NET),y)
-CONFIGURED_APPS += netutils/uiplib
-CONFIGURED_APPS += netutils/resolv
-CONFIGURED_APPS += netutils/webclient
-CONFIGURED_APPS += netutils/tftpc
-#CONFIGURED_APPS += netutils/ftpc
-#CONFIGURED_APPS += netutils/ftpd
-ifeq ($(CONFIG_NSH_TELNET),y)
-CONFIGURED_APPS += netutils/telnetd
-endif
-endif
-
-# Applications configured as an NX built-in commands
-
-ifeq ($(CONFIG_ADC),y)
-CONFIGURED_APPS += examples/adc
-endif
-
-ifeq ($(CONFIG_PWM),y)
-CONFIGURED_APPS += examples/pwm
-endif
-
-ifeq ($(CONFIG_CAN),y)
-CONFIGURED_APPS += examples/can
-endif
-
-ifeq ($(CONFIG_I2C),y)
-CONFIGURED_APPS += system/i2c
-endif
-
-ifeq ($(CONFIG_WATCHDOG),y)
-CONFIGURED_APPS += examples/watchdog
-endif
-
-# Uncomment examples/ftpc to include the FTP client example
-# Uncomment examples/ftpd to include the FTP daemon example
-
-ifeq ($(CONFIG_NET),y)
-#CONFIGURED_APPS += examples/ftpc
-#CONFIGURED_APPS += examples/ftpd
-endif
diff --git a/nuttx/configs/stm3240g-eval/nsh2/defconfig b/nuttx/configs/stm3240g-eval/nsh2/defconfig
index ef4c87248..492037ca2 100644
--- a/nuttx/configs/stm3240g-eval/nsh2/defconfig
+++ b/nuttx/configs/stm3240g-eval/nsh2/defconfig
@@ -1,374 +1,447 @@
-############################################################################
-# configs/stm3240g-eval/nsh2/defconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F407IG=y
-CONFIG_ARCH_BOARD="stm3240g-eval"
-CONFIG_ARCH_BOARD_STM3240G_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_RAM_SIZE=196608
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_FPU=n
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=y
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
 
 #
-# Identify toolchain and linker options
+# Build Configuration
 #
-CONFIG_STM32_CODESOURCERYW=y
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_ATOLLIC_LITE=n
-CONFIG_STM32_ATOLLIC_PRO=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=n
-CONFIG_STM32_BUILDROOT=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
 
 #
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+# Binary Output Formats
 #
-CONFIG_STM32_DFU=y
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
 
 #
-# On-chip CCM SRAM configuration
+# Customize Header Files
 #
-CONFIG_STM32_CCMEXCLUDE=y
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
 
 #
-# On-board FSMC SRAM configuration
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
 #
-CONFIG_STM32_FSMC_SRAM=y
-CONFIG_HEAP2_BASE=0x64000000
-CONFIG_HEAP2_SIZE=2097152
-  
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+CONFIG_SDIO_DMA=y
+CONFIG_SDIO_DMAPRIO=0x00010000
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
+# CONFIG_NET_MULTICAST is not set
+
 #
-# Individual subsystems can be enabled:
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+CONFIG_ARCH_CHIP_STM32F407IG=y
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+CONFIG_STM32_DFU=y
+
 #
-# AHB1:
-CONFIG_STM32_CRC=n
-CONFIG_STM32_BKPSRAM=n
-CONFIG_STM32_CCMDATARAM=n
-CONFIG_STM32_DMA1=n
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
 CONFIG_STM32_DMA2=y
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
 CONFIG_STM32_ETHMAC=y
-CONFIG_STM32_OTGHS=n
-# AHB2:
-CONFIG_STM32_DCMI=n
-CONFIG_STM32_CRYP=n
-CONFIG_STM32_HASH=n
-CONFIG_STM32_RNG=n
-CONFIG_STM32_OTGFS=n
-# AHB3:
-CONFIG_STM32_FSMC=n
-# APB1:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_TIM12=n
-CONFIG_STM32_TIM13=n
-CONFIG_STM32_TIM14=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_IWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI3=n
-CONFIG_STM32_USART2=n
-CONFIG_STM32_USART3=n
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
 CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_I2C3=n
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_CAN2=n
-CONFIG_STM32_DAC=n
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
 CONFIG_STM32_PWR=y
-# APB2:
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=n
-CONFIG_STM32_USART6=n
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_ADC3=n
+# CONFIG_STM32_RNG is not set
 CONFIG_STM32_SDIO=y
-CONFIG_STM32_SPI1=n
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
 CONFIG_STM32_SYSCFG=y
-CONFIG_STM32_TIM9=n
-CONFIG_STM32_TIM10=n
-CONFIG_STM32_TIM11=n
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+# CONFIG_STM32_USART2 is not set
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_I2C=y
 
 #
-# STM32F40xxx specific serial device driver settings
+# Alternate Pin Mapping
 #
-CONFIG_USART1_SERIAL_CONSOLE=n
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=128
-CONFIG_USART2_TXBUFSIZE=128
-CONFIG_USART3_TXBUFSIZE=128
-CONFIG_UART4_TXBUFSIZE=128
-CONFIG_UART5_TXBUFSIZE=128
-
-CONFIG_USART1_RXBUFSIZE=128
-CONFIG_USART2_RXBUFSIZE=128
-CONFIG_USART3_RXBUFSIZE=128
-CONFIG_UART4_RXBUFSIZE=128
-CONFIG_UART5_RXBUFSIZE=128
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_CCMEXCLUDE=y
+# CONFIG_STM32_DMACAPABLE is not set
 
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
+#
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=500
+CONFIG_STM32_I2CTIMEOTICKS=500
+# CONFIG_STM32_I2C_DUTY16_9 is not set
 
 #
-# STM32F40xxx specific CAN device driver settings
+# SDIO Configuration
 #
-CONFIG_CAN=n
-CONFIG_CAN_EXTID=n
-#CONFIG_CAN_FIFOSIZE
-#CONFIG_CAN_NPENDINGRTR
-CONFIG_CAN_LOOPBACK=n
-CONFIG_CAN1_BAUD=700000
-CONFIG_CAN2_BAUD=700000
+CONFIG_SDIO_PRI=128
 
 #
-# STM32F40xxx Ethernet device driver settings
+# Ethernet MAC configuration
 #
 CONFIG_STM32_PHYADDR=1
+# CONFIG_STM32_PHYINIT is not set
 CONFIG_STM32_MII=y
 CONFIG_STM32_MII_MCO1=y
-CONFIG_STM32_MII_MCO2=n
-CONFIG_STM32_RMII=n
+# CONFIG_STM32_MII_MCO2 is not set
+# CONFIG_STM32_MII_EXTCLK is not set
 CONFIG_STM32_AUTONEG=y
-#CONFIG_STM32_ETHFD
-#CONFIG_STM32_ETH100MB
 CONFIG_STM32_PHYSR=16
+# CONFIG_STM32_PHYSR_ALTCONFIG is not set
 CONFIG_STM32_PHYSR_SPEED=0x0002
 CONFIG_STM32_PHYSR_100MBPS=0x0000
 CONFIG_STM32_PHYSR_MODE=0x0004
 CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
-CONFIG_STM32_ETH_PTP=n
-CONFIG_STM32_ETHMAC_REGDEBUG=n
+# CONFIG_STM32_ETH_PTP is not set
 
 #
-# I2C configuration
+# USB Host Configuration
 #
-CONFIG_I2C=y
-CONFIG_I2C_POLLED=y
-CONFIG_I2C_TRANSFER=y
-CONFIG_I2C_TRACE=n
 
 #
-# ADC configuration
-#
-# Enable ADC driver support.  The STM3240G-EVAL has a 10 Kohm potentiometer
-# RV1 connected to PF9 of STM32F407IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7
+# USB Device Configuration
 #
-CONFIG_ADC=n
-#CONFIG_STM32_TIM1_ADC=y
-CONFIG_STM32_TIM1_ADC3=y
-CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100
 
 #
-# PWM configuration
+# Architecture Options
 #
-# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output
-# a pulse train using several options (see board.h).  Here the default setup is for TIM8, CH4.
-# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8.
-#
-CONFIG_PWM=n
-CONFIG_PWM_PULSECOUNT=y
-CONFIG_STM32_TIM8_PWM=y
-CONFIG_STM32_TIM8_CHANNEL=4
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
 
 #
-# General build options
+# Board Settings
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
 
 #
-# General OS setup
+# Interrupt options
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_USB=n
-CONFIG_DEBUG_NET=n
-CONFIG_DEBUG_RTC=n
-CONFIG_DEBUG_ANALOG=n
-CONFIG_DEBUG_PWM=n
-CONFIG_DEBUG_CAN=n
-CONFIG_DEBUG_I2C=n
-CONFIG_DEBUG_DMA=n
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2011
-CONFIG_START_MONTH=12
-CONFIG_START_DAY=6
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=n
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=y
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-CONFIG_SCHED_WAITPID=y
-CONFIG_SCHED_ATEXIT=n
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
 
 #
-# System Logging
+# Boot options
 #
-
-CONFIG_SYSLOG=y
-CONFIG_RAMLOG=y
-CONFIG_RAMLOG_CONSOLE=n
-CONFIG_RAMLOG_SYSLOG=y
-#CONFIG_RAMLOG_NPOLLWAITERS
-#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# Settings for NXFLAT
+# Boot Memory Configuration
 #
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=196608
+# CONFIG_ARCH_HAVE_SDRAM is not set
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Board Selection
 #
-# There are certain dependency relationships in these
-# features.
+CONFIG_ARCH_BOARD_STM3240G_EVAL=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm3240g-eval"
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Common Board Options
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
-CONFIG_DISABLE_POLL=n
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
 
 #
-# Misc libc settings
+# Board-Specific Options
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
 
 #
-# Allow for architecture optimized implementations
+# RTOS Features
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
 
 #
 # Sizes of configurable things (0 disables)
@@ -379,9 +452,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_STDIO_LINEBUFFER=y
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -389,324 +459,621 @@ CONFIG_PREALLOC_WDOGS=16
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Framebuffer driver options
+# Stack and heap information
 #
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+# CONFIG_I2C_WRITEREAD is not set
+CONFIG_I2C_POLLED=y
+# CONFIG_I2C_TRACE is not set
+# CONFIG_I2C_RESET is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+# CONFIG_RTC_ALARM is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_HAVECARDDETECT is not set
+CONFIG_ARCH_HAVE_SDIO=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_SDIO_PREFLIGHT=y
+# CONFIG_SDIO_MUXBUS is not set
+# CONFIG_SDIO_BLOCKSETUP is not set
+CONFIG_MTD=y
 
 #
-# Filesystem configuration
+# MTD Configuration
 #
-CONFIG_FS_FAT=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
+# CONFIG_MTD_PARTITION is not set
+# CONFIG_MTD_BYTE_WRITE is not set
+# CONFIG_MTD_CONFIG is not set
+# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
 
 #
-# Maintain legacy build behavior (revisit)
+# MTD Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_RAMMTD is not set
+# CONFIG_MTD_AT24XX is not set
+# CONFIG_MTD_AT25 is not set
+# CONFIG_MTD_AT45DB is not set
+# CONFIG_MTD_M25P is not set
+# CONFIG_MTD_SMART is not set
+# CONFIG_MTD_RAMTRON is not set
+# CONFIG_MTD_SST25 is not set
+# CONFIG_MTD_SST25XX is not set
+# CONFIG_MTD_SST39FV is not set
+# CONFIG_MTD_W25 is not set
+CONFIG_NETDEVICES=y
+
+#
+# General Ethernet MAC Driver Options
 #
+# CONFIG_NETDEV_MULTINIC is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
 
 #
-# SPI-based MMC/SD driver
+# External Ethernet PHY Device Support
+#
+# CONFIG_ETH0_PHY_NONE is not set
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+CONFIG_ETH0_PHY_DP83848C=y
+# CONFIG_ETH0_PHY_LAN8720 is not set
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+# USART Configuration
+#
+# CONFIG_STANDARD_SERIAL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# Block driver buffering
+# System Logging Device Options
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
 
 #
-# STM32 SDIO-based MMC/SD driver
+# System Logging
 #
-CONFIG_SDIO_DMA=y
-CONFIG_SDIO_PREFLIGHT=y
-#CONFIG_SDIO_PRI=128
-#CONFIG_SDIO_DMAPRIO
-#CONFIG_SDIO_WIDTH_D1_ONLY
-CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
+CONFIG_RAMLOG=y
+CONFIG_RAMLOG_SYSLOG=y
+CONFIG_RAMLOG_CONSOLE_BUFSIZE=1024
+# CONFIG_RAMLOG_CRLF is not set
+CONFIG_RAMLOG_NONBLOCKING=y
+CONFIG_RAMLOG_NPOLLWAITERS=4
 
 #
-# TCP/IP and UDP support via uIP
+# Networking Support
 #
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
 CONFIG_NET=y
-CONFIG_NET_NOINTS=n
+# CONFIG_NET_NOINTS is not set
 CONFIG_NET_MULTIBUFFER=y
-CONFIG_NET_IPv6=n
+# CONFIG_NET_PROMISCUOUS is not set
 CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOCKOPTS=y
+# CONFIG_NET_SOLINGER is not set
 CONFIG_NET_BUFSIZE=562
+# CONFIG_NET_TCPURGDATA is not set
+
+#
+# TCP/IP Networking
+#
 CONFIG_NET_TCP=y
 CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
 CONFIG_NET_TCP_READAHEAD=y
-#CONFIG_NET_TCP_READAHEAD_BUFSIZE
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
 CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+# CONFIG_NET_TCP_WRITE_BUFFERS is not set
+CONFIG_NET_TCP_RECVDELAY=0
 CONFIG_NET_TCPBACKLOG=y
-CONFIG_NET_MAX_LISTENPORTS=40
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
 CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_BROADCAST=y
+# CONFIG_NET_RXAVAIL is not set
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_PING=y
-#CONFIG_NET_PINGADDRCONF=0
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
 CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-CONFIG_NET_BROADCAST=n
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_ARP_IPIN=n
-CONFIG_NET_MULTICAST=n
+CONFIG_NET_RECEIVE_WINDOW=536
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
 
 #
-# UIP Network Utilities
+# File Systems
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
 
 #
-# FTP Server
+# File system configuration
 #
-CONFIG_FTPD_CMDBUFFERSIZE=2048
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
 
 #
-# RTC Configuration
+# System Logging
 #
-CONFIG_RTC=y
-CONFIG_RTC_DATETIME=y
-CONFIG_RTC_HIRES=n
-CONFIG_RTC_FREQUENCY=1
-CONFIG_RTC_ALARM=n
-
-#
-# STM32 USB OTG FS Device Configuration
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# STM32 USB OTG FS Host Configuration
-#
-CONFIG_USBHOST=n
-#CONFIG_STM32_OTGFS_RXFIFO_SIZE
-#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
-#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
-#CONFIG_STM32_OTGFS_DESCSIZE
-CONFIG_STM32_OTGFS_SOFINTR=n
-CONFIG_STM32_USBHOST_REGDEBUG=n
-CONFIG_STM32_USBHOST_PKTDUMP=n
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Graphics related configuration settings
-#
-CONFIG_NX=n
-CONFIG_NX_MULTIUSER=n
-CONFIG_NX_NPLANES=1
-CONFIG_NX_DISABLE_1BPP=y
-CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=y
-CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
-CONFIG_NX_DISABLE_24BPP=y
-CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=1
-CONFIG_NX_MOUSE=y
-CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=0xd69a
-CONFIG_NXTK_BORDERCOLOR2=0xad55
-CONFIG_NXTK_AUTORAISE=n
-CONFIG_NXFONT_SANS17X22=y
-CONFIG_NXFONT_SANS20X26=n
-CONFIG_NXFONT_SANS22X29=n
-CONFIG_NXFONT_SANS23X27=n
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS17X23B=n
-CONFIG_NXFONT_SANS20X27B=y
-CONFIG_NXFONT_SANS22X29B=y
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=n
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=y
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
+# CONFIG_SYSLOG_ENABLE is not set
+CONFIG_SYSLOG=y
+CONFIG_SYSLOG_CHAR=y
+CONFIG_SYSLOG_DEVPATH="/dev/syslog"
+
+#
+# Graphics Support
 #
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
 CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=1024
+# CONFIG_SCHED_LPWORK is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_XMLRPC is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
 CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_TMPDIR="/tmp"
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=n
-CONFIG_NSH_TELNET=y
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_CONSOLE is not set
+
+#
+# USB Trace Support
+#
 CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
 CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=y
+# CONFIG_NSH_TELNET_LOGIN is not set
 CONFIG_NSH_IPADDR=0x0a000002
 CONFIG_NSH_DRIPADDR=0x0a000001
 CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+# CONFIG_NSH_DNS is not set
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_MAX_ROUNDTRIP=20
 
 #
-# Architecture-specific NSH options
+# NxWidgets/NxWM
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Settings for examples/nsh
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
 #
-CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
 
 #
-# I2C tool settings
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
 #
+# I2C tool
+#
+CONFIG_SYSTEM_I2CTOOL=y
 CONFIG_I2CTOOL_MINBUS=1
 CONFIG_I2CTOOL_MAXBUS=3
-#CONFIG_I2CTOOL_MINADDR
-#CONFIG_I2CTOOL_MAXADDR
-#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_MINADDR=0x03
+CONFIG_I2CTOOL_MAXADDR=0x77
+CONFIG_I2CTOOL_MAXREGADDR=0xff
 CONFIG_I2CTOOL_DEFFREQ=100000
 
 #
-# Settings for examples/usbserial
+# INI File Parser
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+# CONFIG_SYSTEM_INIFILE is not set
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
 
 #
-# Settings for examples/adc
+# FLASH Erase-all Command
 #
+# CONFIG_SYSTEM_FLASH_ERASEALL is not set
 
 #
-# Settings for examples/can
+# NxPlayer media player library / command Line
 #
+# CONFIG_SYSTEM_NXPLAYER is not set
 
 #
-# Settings for examples/pwm
+# RAM test
 #
+# CONFIG_SYSTEM_RAMTEST is not set
 
 #
-# Settings for examples/ftpd
+# readline()
 #
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
 
 #
-# Stack and heap information
+# Power Off
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set