SAMA5D4-EK: Add a configuration for testing IPv6

5 files changed, 1888 insertions, 0 deletions

diff --git a/nuttx/configs/sama5d4-ek/README.txt b/nuttx/configs/sama5d4-ek/README.txt
index 5e0440036..fe703f28c 100644
--- a/nuttx/configs/sama5d4-ek/README.txt
+++ b/nuttx/configs/sama5d4-ek/README.txt
@@ -3595,6 +3595,9 @@ Configurations
       the description below and the section above entitled "Creating and
       Using DRAMBOOT" for more information
     elf:  Demonstrates execution of ELF file from a file system.
+    ipv6: This is another version of the NuttShell configuration.  It is
+      very similar to the nsh configuration except that it has IPv6 enabled
+      and IPv4 disabled.
     knsh: An NSH configuration used to test the SAMA5D kernel build
       configuration.  Uses a tiny NSH configuration that runs at
       start time from a mounted file system.
@@ -3862,6 +3865,88 @@ Configurations
       2014-9-16: Reverified after fixing changes for the knsh configuration
                  that broke this on.  All seems to be well now.
 
+  ipv6:
+  ----
+    This is another version of the NuttShell configuration.  It is very
+    similar to the nsh configuration except that it has IPv6 enabled and
+    IPv4 disabled.  Several network utilities that are not yet available
+    under IPv6 are disabled.
+
+    NOTES:
+
+    1. As of 2015-02-09, this configuration was identical to the nsh
+       configuration other than using IPv6.  So all of the notes below
+       regarding the nsh configuration apply.
+
+       Telnet does not work with IPv6.
+
+    2. This configuration can be modified to that both IPv4 and IPv6
+       are support.  Here is a summary of the additional configuration
+       settings requird to support both IPv4 and IPv6:
+
+         CONFIG_NET_IPv4=y
+         CONFIG_NET_ARP=y
+         CONFIG_NET_ARP_SEND=y (optional)
+         CONFIG_NET_ICMP=y
+         CONFIG_NET_ICMP_PING=y
+
+         CONFIG_NETUTILS_DNSCLIENT=y
+         CONFIG_NETUTILS_DNSCLIENT_IPv4=y
+         CONFIG_NETUTILS_TELNETD=y
+
+         CONFIG_NSH_IPADDR=0x0a000002
+         CONFIG_NSH_DRIPADDR=0x0a000001
+         CONFIG_NSH_NETMASK=0xffffff00
+         CONFIG_NSH_TELNET=y
+
+       Then from NSH, you have both ping and ping6 commands:
+
+         nsh> ping 10.0.0.1
+         nsh> ping6 fc00::1
+
+       And from the host you can do similar:
+
+         ping 10.0.0.2
+         ping6 fc00::2   (Linux)
+         ping -6 fc00::2 (Windows cmd)
+
+       and Telnet again works from the host:
+
+         telent 10.0.0.2
+
+    3. You can enable IPv6 autonomous address configuration with the
+       following changes to the configuration:
+
+       + CONFIG_NET_ICMPv6_AUTOCONF=y
+       + CONFIG_ICMPv6_AUTOCONF_DELAYMSEC=100
+       + CONFIG_ICMPv6_AUTOCONF_MAXTRIES=5
+
+       - CONFIG_NSH_DRIPv6ADDR_1=0xfc00
+       - CONFIG_NSH_DRIPv6ADDR_2=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_3=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_4=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_5=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_6=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_7=0x0000
+       - CONFIG_NSH_DRIPv6ADDR_8=0x0001
+
+       - CONFIG_NSH_IPv6ADDR_1=0xfc00
+       - CONFIG_NSH_IPv6ADDR_2=0x0000
+       - CONFIG_NSH_IPv6ADDR_3=0x0000
+       - CONFIG_NSH_IPv6ADDR_4=0x0000
+       - CONFIG_NSH_IPv6ADDR_5=0x0000
+       - CONFIG_NSH_IPv6ADDR_6=0x0000
+       - CONFIG_NSH_IPv6ADDR_7=0x0000
+       - CONFIG_NSH_IPv6ADDR_8=0x0002
+       - CONFIG_NSH_IPv6NETMASK_1=0xffff
+       - CONFIG_NSH_IPv6NETMASK_2=0xffff
+       - CONFIG_NSH_IPv6NETMASK_3=0xffff
+       - CONFIG_NSH_IPv6NETMASK_4=0xffff
+       - CONFIG_NSH_IPv6NETMASK_5=0xffff
+       - CONFIG_NSH_IPv6NETMASK_6=0xffff
+       - CONFIG_NSH_IPv6NETMASK_7=0xffff
+       - CONFIG_NSH_IPv6NETMASK_8=0xff80
+
   knsh:
     An NSH configuration used to test the SAMA5D kenel build configuration.
 
diff --git a/nuttx/configs/sama5d4-ek/ipv6/Make.defs b/nuttx/configs/sama5d4-ek/ipv6/Make.defs
new file mode 100644
index 000000000..2565c1e47
--- /dev/null
+++ b/nuttx/configs/sama5d4-ek/ipv6/Make.defs
@@ -0,0 +1,144 @@
+############################################################################
+# configs/sama5d4-ek/ipv6/Make.defs
+#
+#   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
+
+ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
+  LDSCRIPT = isram.ld
+endif
+
+ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
+ifeq ($(CONFIG_SAMA5D4EK_DRAM_BOOT),y)
+  LDSCRIPT = dramboot.ld
+else
+  LDSCRIPT = uboot.ld
+endif
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
+  ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+# NXFLAT module definitions
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# ELF module definitions
+
+CELFFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
+CXXELFFLAGS = $(CXXFLAGS) -mlong-calls # --target1-abs
+
+LDELFFLAGS = -r -e main
+ifeq ($(WINTOOL),y)
+  LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
+else
+  LDELFFLAGS += -T $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
+endif
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+ifeq ($(CONFIG_HOST_WINDOWS),y)
+  HOSTEXEEXT = .exe
+else
+  HOSTEXEEXT =
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native host tools
+  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
+  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
+else
+  # Linux/Cygwin-native host tools
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
+endif
+
diff --git a/nuttx/configs/sama5d4-ek/ipv6/defconfig b/nuttx/configs/sama5d4-ek/ipv6/defconfig
new file mode 100644
index 000000000..231dac4c5
--- /dev/null
+++ b/nuttx/configs/sama5d4-ek/ipv6/defconfig
@@ -0,0 +1,1581 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+# CONFIG_STACK_COLORATION is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+CONFIG_ARCH_CHIP_SAMA5=y
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM4 is not set
+CONFIG_ARCH_CORTEXA5=y
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-a"
+CONFIG_ARCH_CHIP="sama5"
+CONFIG_ARCH_HAVE_FPU=y
+CONFIG_ARCH_FPU=y
+CONFIG_ARCH_HAVE_LOWVECTORS=y
+CONFIG_ARCH_LOWVECTORS=y
+# CONFIG_ARCH_ROMPGTABLE is not set
+
+#
+# ARMv7-A Configuration Options
+#
+CONFIG_ARMV7A_HAVE_L2CC=y
+CONFIG_ARMV7A_HAVE_L2CC_PL310=y
+
+#
+# L2 Cache Configuration
+#
+# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
+CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
+# CONFIG_ARMV7A_DECODEFIQ is not set
+CONFIG_SDIO_DMA=y
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
+# CONFIG_NET_MULTICAST is not set
+# CONFIG_USBHOST_BULK_DISABLE is not set
+# CONFIG_USBHOST_INT_DISABLE is not set
+CONFIG_USBHOST_ISOC_DISABLE=y
+
+#
+# SAMA5 Configuration Options
+#
+CONFIG_SAMA5_HAVE_AESB=y
+CONFIG_SAMA5_HAVE_ICM=y
+CONFIG_SAMA5_HAVE_UART0=y
+CONFIG_SAMA5_HAVE_UART1=y
+CONFIG_SAMA5_HAVE_USART4=y
+# CONFIG_SAMA5_HAVE_CAN0 is not set
+# CONFIG_SAMA5_HAVE_CAN1 is not set
+# CONFIG_SAMA5_HAVE_DMA is not set
+CONFIG_SAMA5_HAVE_DDR32=y
+CONFIG_SAMA5_HAVE_XDMA=y
+CONFIG_SAMA5_HAVE_LCDC=y
+# CONFIG_SAMA5_HAVE_GMAC is not set
+# CONFIG_SAMA5_HAVE_EMACA is not set
+CONFIG_SAMA5_HAVE_EMACB=y
+CONFIG_SAMA5_HAVE_EMAC1=y
+# CONFIG_SAMA5_HAVE_HSMCI2 is not set
+CONFIG_SAMA5_HAVE_SAIC=y
+CONFIG_SAMA5_HAVE_SBM=y
+CONFIG_SAMA5_HAVE_SFC=y
+CONFIG_SAMA5_HAVE_SPI2=y
+# CONFIG_SAMA5_HAVE_TC is not set
+CONFIG_SAMA5_HAVE_TC1=y
+CONFIG_SAMA5_HAVE_TC2=y
+CONFIG_SAMA5_HAVE_TRUSTZONE=y
+CONFIG_SAMA5_HAVE_TWI3=y
+CONFIG_SAMA5_HAVE_VDEC=y
+# CONFIG_ARCH_CHIP_SAMA5D3 is not set
+CONFIG_ARCH_CHIP_SAMA5D4=y
+# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D33 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D36 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D41 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D42 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D43 is not set
+CONFIG_ARCH_CHIP_ATSAMA5D44=y
+
+#
+# SAMA5 Peripheral Support
+#
+# CONFIG_SAMA5_AES is not set
+# CONFIG_SAMA5_TDES is not set
+# CONFIG_SAMA5_AESB is not set
+# CONFIG_SAMA5_DBGU is not set
+# CONFIG_SAMA5_PIT is not set
+# CONFIG_SAMA5_WDT is not set
+CONFIG_SAMA5_RTC=y
+# CONFIG_SAMA5_ICM is not set
+CONFIG_SAMA5_HSMC=y
+# CONFIG_SAMA5_SMD is not set
+# CONFIG_SAMA5_SAIC is not set
+# CONFIG_SAMA5_UART0 is not set
+# CONFIG_SAMA5_UART1 is not set
+# CONFIG_SAMA5_USART0 is not set
+# CONFIG_SAMA5_USART1 is not set
+# CONFIG_SAMA5_USART2 is not set
+CONFIG_SAMA5_USART3=y
+CONFIG_SAMA5_USART4=y
+CONFIG_SAMA5_TWI0=y
+# CONFIG_SAMA5_TWI1 is not set
+# CONFIG_SAMA5_TWI2 is not set
+# CONFIG_SAMA5_TWI3 is not set
+CONFIG_SAMA5_HSMCI0=y
+# CONFIG_SAMA5_HSMCI1 is not set
+# CONFIG_SAMA5_SBM is not set
+# CONFIG_SAMA5_SFC is not set
+# CONFIG_SAMA5_SPI0 is not set
+# CONFIG_SAMA5_SPI1 is not set
+# CONFIG_SAMA5_SPI2 is not set
+# CONFIG_SAMA5_TC0 is not set
+# CONFIG_SAMA5_TC1 is not set
+# CONFIG_SAMA5_TC2 is not set
+# CONFIG_SAMA5_PWM is not set
+# CONFIG_SAMA5_ADC is not set
+CONFIG_SAMA5_XDMAC0=y
+# CONFIG_SAMA5_XDMAC1 is not set
+CONFIG_SAMA5_UHPHS=y
+# CONFIG_SAMA5_UDPHS is not set
+CONFIG_SAMA5_EMACB=y
+CONFIG_SAMA5_EMAC0=y
+# CONFIG_SAMA5_EMAC1 is not set
+CONFIG_SAMA5_LCDC=y
+# CONFIG_SAMA5_ISI is not set
+CONFIG_SAMA5_SSC0=y
+# CONFIG_SAMA5_SSC1 is not set
+# CONFIG_SAMA5_SHA is not set
+CONFIG_SAMA5_TRNG=y
+# CONFIG_SAMA5_ARM is not set
+# CONFIG_SAMA5_FUSE is not set
+# CONFIG_SAMA5_MPDDRC is not set
+# CONFIG_SAMA5_VDEC is not set
+CONFIG_SAMA5_PIO_IRQ=y
+# CONFIG_SAMA5_PIOA_IRQ is not set
+# CONFIG_SAMA5_PIOB_IRQ is not set
+# CONFIG_SAMA5_PIOC_IRQ is not set
+# CONFIG_SAMA5_PIOD_IRQ is not set
+CONFIG_SAMA5_PIOE_IRQ=y
+
+#
+# LCDC Configuration
+#
+CONFIG_SAMA5_LCDC_BACKLIGHT=y
+CONFIG_SAMA5_LCDC_DEFBACKLIGHT=0xc8
+CONFIG_SAMA5_LCDC_BACKCOLOR=0x7b5d
+CONFIG_SAMA5_LCDC_FB_VBASE=0x2fa00000
+CONFIG_SAMA5_LCDC_FB_PBASE=0x2fa00000
+CONFIG_SAMA5_LCDC_FB_SIZE=6291456
+
+#
+# Base layer configuration
+#
+CONFIG_SAMA5_LCDC_BASE_ROT0=y
+# CONFIG_SAMA5_LCDC_BASE_ROT90 is not set
+# CONFIG_SAMA5_LCDC_BASE_ROT180 is not set
+# CONFIG_SAMA5_LCDC_BASE_ROT270 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGB444 is not set
+# CONFIG_SAMA5_LCDC_BASE_ARGB4444 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGBA4444 is not set
+CONFIG_SAMA5_LCDC_BASE_RGB565=y
+# CONFIG_SAMA5_LCDC_BASE_TRGB1555 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGB666 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGB666P is not set
+# CONFIG_SAMA5_LCDC_BASE_TRGB1666 is not set
+# CONFIG_SAMA5_LCDC_BASE_TRGBP is not set
+# CONFIG_SAMA5_LCDC_BASE_RGB888 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGB888P is not set
+# CONFIG_SAMA5_LCDC_BASE_TRGB1888 is not set
+# CONFIG_SAMA5_LCDC_BASE_ARGB8888 is not set
+# CONFIG_SAMA5_LCDC_BASE_RGBA8888 is not set
+
+#
+# EMAC device driver options
+#
+
+#
+# EMAC0 device driver options
+#
+CONFIG_SAMA5_EMAC0_NRXBUFFERS=16
+CONFIG_SAMA5_EMAC0_NTXBUFFERS=8
+CONFIG_SAMA5_EMAC0_PHYADDR=1
+# CONFIG_SAMA5_EMAC0_PHYINIT is not set
+# CONFIG_SAMA5_EMAC0_MII is not set
+CONFIG_SAMA5_EMAC0_RMII=y
+CONFIG_SAMA5_EMAC0_AUTONEG=y
+CONFIG_SAMA5_EMAC0_PHYSR=30
+CONFIG_SAMA5_EMAC0_PHYSR_ALTCONFIG=y
+CONFIG_SAMA5_EMAC0_PHYSR_ALTMODE=0x7
+CONFIG_SAMA5_EMAC0_PHYSR_10HD=0x1
+CONFIG_SAMA5_EMAC0_PHYSR_100HD=0x2
+CONFIG_SAMA5_EMAC0_PHYSR_10FD=0x5
+CONFIG_SAMA5_EMAC0_PHYSR_100FD=0x6
+# CONFIG_SAMA5_EMACB_PREALLOCATE is not set
+# CONFIG_SAMA5_EMACB_NBC is not set
+CONFIG_SAMA5_EMAC0_ISETH0=y
+
+#
+# TWI device driver options
+#
+CONFIG_SAMA5_TWI0_FREQUENCY=100000
+
+#
+# SSC Configuration
+#
+CONFIG_SAMA5_SSC_MAXINFLIGHT=16
+
+#
+# SSC0 Configuration
+#
+CONFIG_SAMA5_SSC0_DATALEN=16
+CONFIG_SAMA5_SSC0_RX=y
+CONFIG_SAMA5_SSC0_RX_RKINPUT=y
+# CONFIG_SAMA5_SSC0_RX_TXCLK is not set
+# CONFIG_SAMA5_SSC0_RX_MCKDIV is not set
+CONFIG_SAMA5_SSC0_RX_FSLEN=1
+CONFIG_SAMA5_SSC0_RX_STTDLY=1
+CONFIG_SAMA5_SSC0_TX=y
+# CONFIG_SAMA5_SSC0_TX_TKINPUT is not set
+CONFIG_SAMA5_SSC0_TX_RXCLK=y
+# CONFIG_SAMA5_SSC0_TX_MCKDIV is not set
+CONFIG_SAMA5_SSC0_TX_TKOUTPUT_NONE=y
+# CONFIG_SAMA5_SSC0_TX_TKOUTPUT_CONT is not set
+# CONFIG_SAMA5_SSC0_TX_TKOUTPUT_XFR is not set
+CONFIG_SAMA5_SSC0_TX_FSLEN=0
+CONFIG_SAMA5_SSC0_TX_STTDLY=1
+# CONFIG_SAMA5_SSC0_LOOPBACK is not set
+
+#
+# HSMCI device driver options
+#
+CONFIG_SAMA5_HSMCI0_XDMAC0=y
+# CONFIG_SAMA5_HSMCI_RDPROOF is not set
+# CONFIG_SAMA5_HSMCI_WRPROOF is not set
+
+#
+# USB High Speed Host Controller driver (HCD) options
+#
+CONFIG_SAMA5_OHCI=y
+CONFIG_SAMA5_OHCI_NEDS=6
+CONFIG_SAMA5_OHCI_NTDS=9
+CONFIG_SAMA5_OHCI_TDBUFFERS=6
+CONFIG_SAMA5_OHCI_TDBUFSIZE=128
+CONFIG_SAMA5_EHCI=y
+CONFIG_SAMA5_EHCI_NQHS=4
+CONFIG_SAMA5_EHCI_NQTDS=6
+CONFIG_SAMA5_EHCI_BUFSIZE=128
+CONFIG_SAMA5_EHCI_PREALLOCATE=y
+# CONFIG_SAMA5_UHPHS_RHPORT1 is not set
+CONFIG_SAMA5_UHPHS_RHPORT2=y
+CONFIG_SAMA5_UHPHS_RHPORT3=y
+
+#
+# External Memory Configuration
+#
+# CONFIG_SAMA5_EBICS0 is not set
+# CONFIG_SAMA5_EBICS1 is not set
+# CONFIG_SAMA5_EBICS2 is not set
+# CONFIG_SAMA5_EBICS3 is not set
+# CONFIG_SAMA5_HAVE_NAND is not set
+# CONFIG_SAMA5_HAVE_PMECC is not set
+# CONFIG_SAMA5_BOOT_ISRAM is not set
+CONFIG_SAMA5_BOOT_SDRAM=y
+
+#
+# Heap Configuration
+#
+CONFIG_SAMA5_ISRAM_HEAP=y
+CONFIG_SAMA5_DDRCS_RESERVE=y
+CONFIG_SAMA5_DDRCS_HEAP_END=0x2fa00000
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+CONFIG_ARCH_HAVE_ADDRENV=y
+CONFIG_ARCH_NEED_ADDRENV_MAPPING=y
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_HAVE_MMU=y
+# CONFIG_ARCH_HAVE_MPU is not set
+CONFIG_ARCH_NAND_HWECC=y
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+CONFIG_ARCH_USE_MMU=y
+# CONFIG_ARCH_ADDRENV is not set
+# CONFIG_PAGING is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=65775
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+# CONFIG_BOOT_RUNFROMFLASH is not set
+# CONFIG_BOOT_RUNFROMISRAM is not set
+CONFIG_BOOT_RUNFROMSDRAM=y
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_VSTART=0x20000000
+CONFIG_RAM_SIZE=268435456
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_SAMA5D4_EK=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="sama5d4-ek"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_ARCH_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
+
+#
+# Board-Specific Options
+#
+# CONFIG_SAMA5D4_MB_REVC is not set
+CONFIG_SAMA5D4_MB_REVE=y
+# CONFIG_SAMA5D4EK_384MHZ is not set
+# CONFIG_SAMA5D4EK_396MHZ is not set
+CONFIG_SAMA5D4EK_528MHZ=y
+CONFIG_SAMA5D4EK_DRAM_BOOT=y
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT=y
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_FSTYPE="vfat"
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_BLKDEV="/dev/mmcsd0"
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_MOUNTPOINT="/mnt/sdcard"
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_DDELAY=1000
+CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_UDELAY=2000
+# CONFIG_SAMA5D4EK_ROMFS_MOUNT is not set
+CONFIG_SAMA5D4EK_MXT_I2CFREQUENCY=400000
+CONFIG_SAMA5D4EK_MXT_DEVMINOR=0
+# CONFIG_SAMA5D4EK_SLOWCLOCK is not set
+CONFIG_SAMA5D4EK_WM8904_I2CFREQUENCY=400000
+CONFIG_SAMA5D4EK_WM8904_SRCMAIN=y
+# CONFIG_SAMA5D4EK_WM8904_SRCSCK is not set
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_ARCH_HAVE_TICKLESS=y
+# CONFIG_SCHED_TICKLESS is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=32
+CONFIG_WDOG_INTRESERVE=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=200
+CONFIG_TASK_NAME_SIZE=31
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+# CONFIG_SDCLONE_DISABLE is not set
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+
+#
+# Work Queue Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=192
+CONFIG_SCHED_HPWORKPERIOD=50000
+CONFIG_SCHED_HPWORKSTACKSIZE=2048
+# CONFIG_SCHED_LPWORK is not set
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+CONFIG_DEV_ZERO=y
+CONFIG_ARCH_HAVE_RNG=y
+CONFIG_DEV_RANDOM=y
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_WRITEREAD=y
+# CONFIG_I2C_POLLED is not set
+# CONFIG_I2C_TRACE is not set
+CONFIG_I2C_RESET=y
+# CONFIG_SPI is not set
+CONFIG_I2S=y
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+# CONFIG_RTC_ALARM is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+CONFIG_AUDIO_DEVICES=y
+# CONFIG_AUDIO_I2SCHAR is not set
+# CONFIG_VS1053 is not set
+CONFIG_AUDIO_WM8904=y
+CONFIG_WM8904_INITVOLUME=250
+CONFIG_WM8904_INFLIGHT=2
+CONFIG_WM8904_MSG_PRIO=1
+CONFIG_WM8904_BUFFER_SIZE=8192
+CONFIG_WM8904_NUM_BUFFERS=8
+CONFIG_WM8904_WORKER_STACKSIZE=1536
+# CONFIG_WM8904_REGDUMP is not set
+# CONFIG_WM8904_CLKDEBUG is not set
+# CONFIG_AUDIO_NULL is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+CONFIG_INPUT=y
+# CONFIG_MOUSE is not set
+# CONFIG_INPUT_MAX11802 is not set
+# CONFIG_INPUT_TSC2007 is not set
+# CONFIG_INPUT_ADS7843E is not set
+CONFIG_INPUT_MXT=y
+CONFIG_MXT_THRESHX=5
+CONFIG_MXT_THRESHY=8
+CONFIG_MXT_NPOLLWAITERS=4
+# CONFIG_INPUT_STMPE811 is not set
+# CONFIG_DJOYSTICK is not set
+# CONFIG_AJOYSTICK is not set
+# CONFIG_LCD is not set
+CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+# CONFIG_MMCSD_MMCSUPPORT is not set
+CONFIG_MMCSD_HAVECARDDETECT=y
+CONFIG_ARCH_HAVE_SDIO=y
+# CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set
+CONFIG_MMCSD_SDIO=y
+# CONFIG_SDIO_PREFLIGHT is not set
+# CONFIG_SDIO_MUXBUS is not set
+CONFIG_SDIO_BLOCKSETUP=y
+# CONFIG_MTD is not set
+# CONFIG_EEPROM is not set
+CONFIG_NETDEVICES=y
+
+#
+# General Ethernet MAC Driver Options
+#
+# CONFIG_NETDEV_MULTINIC is not set
+
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
+
+#
+# External Ethernet PHY Device Support
+#
+CONFIG_ARCH_PHY_INTERRUPT=y
+# CONFIG_ETH0_PHY_NONE is not set
+# CONFIG_ETH0_PHY_AM79C874 is not set
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+CONFIG_ETH0_PHY_KSZ8081=y
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+# CONFIG_ETH0_PHY_DP83848C is not set
+# CONFIG_ETH0_PHY_LAN8720 is not set
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+# CONFIG_ARCH_HAVE_USART2 is not set
+CONFIG_ARCH_HAVE_USART3=y
+CONFIG_ARCH_HAVE_USART4=y
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+# CONFIG_ARCH_HAVE_OTHER_UART is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART3_ISUART=y
+CONFIG_USART4_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_SERIAL_NPOLLWAITERS=2
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set
+CONFIG_USART3_SERIAL_CONSOLE=y
+# CONFIG_USART4_SERIAL_CONSOLE is not set
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART3 Configuration
+#
+CONFIG_USART3_RXBUFSIZE=256
+CONFIG_USART3_TXBUFSIZE=256
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+# CONFIG_USART3_IFLOWCONTROL is not set
+# CONFIG_USART3_OFLOWCONTROL is not set
+
+#
+# USART4 Configuration
+#
+CONFIG_USART4_RXBUFSIZE=256
+CONFIG_USART4_TXBUFSIZE=256
+CONFIG_USART4_BAUD=115200
+CONFIG_USART4_BITS=8
+CONFIG_USART4_PARITY=0
+CONFIG_USART4_2STOP=0
+# CONFIG_USART4_IFLOWCONTROL is not set
+# CONFIG_USART4_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+CONFIG_USBHOST=y
+CONFIG_USBHOST_NPREALLOC=4
+CONFIG_USBHOST_MSC=y
+CONFIG_USBHOST_HIDKBD=y
+CONFIG_HIDKBD_POLLUSEC=80000
+CONFIG_HIDKBD_DEFPRIO=50
+CONFIG_HIDKBD_STACKSIZE=1024
+CONFIG_HIDKBD_BUFSIZE=64
+CONFIG_HIDKBD_NPOLLWAITERS=2
+# CONFIG_HIDKBD_RAWSCANCODES is not set
+# CONFIG_HIDKBD_ALLSCANCODES is not set
+# CONFIG_HIDKBD_NODEBOUNCE is not set
+# CONFIG_USBHOST_HIDMOUSE is not set
+# CONFIG_USBHOST_RTL8187 is not set
+# CONFIG_USBHOST_TRACE is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+CONFIG_RAMLOG=y
+CONFIG_RAMLOG_SYSLOG=y
+# CONFIG_RAMLOG_CONSOLE is not set
+CONFIG_RAMLOG_BUFSIZE=16384
+# CONFIG_RAMLOG_CRLF is not set
+CONFIG_RAMLOG_NONBLOCKING=y
+CONFIG_RAMLOG_NPOLLWAITERS=4
+# CONFIG_SYSLOG_CONSOLE is not set
+
+#
+# Networking Support
+#
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
+CONFIG_NET=y
+# CONFIG_NET_NOINTS is not set
+# CONFIG_NET_PROMISCUOUS is not set
+
+#
+# Driver buffer configuration
+#
+# CONFIG_NET_MULTIBUFFER is not set
+CONFIG_NET_ETH_MTU=590
+CONFIG_NET_ETH_TCP_RECVWNDO=562
+CONFIG_NET_GUARDSIZE=2
+
+#
+# Data link support
+#
+# CONFIG_NET_MULTILINK is not set
+CONFIG_NET_ETHERNET=y
+
+#
+# Network Device Operations
+#
+# CONFIG_NETDEV_PHY_IOCTL is not set
+
+#
+# Internet Protocol Selection
+#
+# CONFIG_NET_IPv4 is not set
+CONFIG_NET_IPv6=y
+CONFIG_NET_IPv6_NCONF_ENTRIES=8
+
+#
+# Socket Support
+#
+CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOCKOPTS=y
+# CONFIG_NET_SOLINGER is not set
+
+#
+# Raw Socket Support
+#
+# CONFIG_NET_PKT is not set
+
+#
+# Unix Domain Socket Support
+#
+# CONFIG_NET_LOCAL is not set
+
+#
+# TCP/IP Networking
+#
+CONFIG_NET_TCP=y
+# CONFIG_NET_TCPURGDATA is not set
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_MAX_LISTENPORTS=20
+CONFIG_NET_TCP_READAHEAD=y
+CONFIG_NET_TCP_WRITE_BUFFERS=y
+CONFIG_NET_TCP_NWRBCHAINS=8
+CONFIG_NET_TCP_RECVDELAY=0
+CONFIG_NET_TCPBACKLOG=y
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_BROADCAST=y
+# CONFIG_NET_RXAVAIL is not set
+CONFIG_NET_UDP_READAHEAD=y
+
+#
+# ICMPv6 Networking Support
+#
+CONFIG_NET_ICMPv6=y
+CONFIG_NET_ICMPv6_PING=y
+CONFIG_NET_ICMPv6_NEIGHBOR=y
+CONFIG_ICMPv6_NEIGHBOR_MAXTRIES=5
+CONFIG_ICMPv6_NEIGHBOR_DELAYMSEC=20
+# CONFIG_NET_ICMPv6_AUTOCONF is not set
+# CONFIG_NET_ICMPv6_ROUTER is not set
+
+#
+# IGMPv2 Client Support
+#
+# CONFIG_NET_IGMP is not set
+
+#
+# ARP Configuration
+#
+
+#
+# Network I/O Buffer Support
+#
+CONFIG_NET_IOB=y
+CONFIG_IOB_NBUFFERS=36
+CONFIG_IOB_BUFSIZE=196
+CONFIG_IOB_NCHAINS=8
+CONFIG_IOB_THROTTLE=8
+# CONFIG_NET_ARCH_INCR32 is not set
+# CONFIG_NET_ARCH_CHKSUM is not set
+CONFIG_NET_STATISTICS=y
+
+#
+# Routing Table Configuration
+#
+# CONFIG_NET_ROUTE is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+CONFIG_FS_AUTOMOUNTER=y
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+CONFIG_FS_ROMFS=y
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+CONFIG_FS_PROCFS=y
+
+#
+# Exclude individual procfs entries
+#
+# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set
+# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set
+# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set
+
+#
+# System Logging
+#
+CONFIG_SYSLOG=y
+# CONFIG_SYSLOG_TIMESTAMP is not set
+# CONFIG_SYSLOG_CHAR is not set
+
+#
+# Graphics Support
+#
+CONFIG_NX=y
+CONFIG_NX_NPLANES=1
+CONFIG_NX_BGCOLOR=0x7b5d
+# CONFIG_NX_WRITEONLY is not set
+
+#
+# Supported Pixel Depths
+#
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+# CONFIG_NX_DISABLE_16BPP is not set
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=y
+CONFIG_NX_PACKEDMSFIRST=y
+
+#
+# Input Devices
+#
+CONFIG_NX_XYINPUT=y
+# CONFIG_NX_XYINPUT_NONE is not set
+CONFIG_NX_XYINPUT_MOUSE=y
+# CONFIG_NX_XYINPUT_TOUCHSCREEN is not set
+CONFIG_NX_KBD=y
+
+#
+# Framed Window Borders
+#
+CONFIG_NXTK_BORDERWIDTH=4
+CONFIG_NXTK_DEFAULT_BORDERCOLORS=y
+# CONFIG_NXTK_AUTORAISE is not set
+
+#
+# Font Selections
+#
+CONFIG_NXFONTS_CHARBITS=7
+# CONFIG_NXFONT_MONO5X8 is not set
+# CONFIG_NXFONT_SANS17X22 is not set
+# CONFIG_NXFONT_SANS20X26 is not set
+# CONFIG_NXFONT_SANS23X27 is not set
+# CONFIG_NXFONT_SANS22X29 is not set
+# CONFIG_NXFONT_SANS28X37 is not set
+# CONFIG_NXFONT_SANS39X48 is not set
+# CONFIG_NXFONT_SANS17X23B is not set
+# CONFIG_NXFONT_SANS20X27B is not set
+# CONFIG_NXFONT_SANS22X29B is not set
+# CONFIG_NXFONT_SANS28X37B is not set
+# CONFIG_NXFONT_SANS40X49B is not set
+# CONFIG_NXFONT_SERIF22X29 is not set
+# CONFIG_NXFONT_SERIF29X37 is not set
+# CONFIG_NXFONT_SERIF38X48 is not set
+CONFIG_NXFONT_SERIF22X28B=y
+# CONFIG_NXFONT_SERIF27X38B is not set
+# CONFIG_NXFONT_SERIF38X49B is not set
+# CONFIG_NXFONT_PIXEL_UNICODE is not set
+# CONFIG_NXFONT_PIXEL_LCD_MACHINE is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_4X6 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_5X7 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_5X8 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X9 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X10 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X12 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X13 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X13B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_6X13O is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_7X13 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_7X13B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_7X13O is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_7X14 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_7X14B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_8X13 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_8X13B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_8X13O is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_9X15 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_9X15B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_9X18 is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_9X18B is not set
+# CONFIG_NXFONT_X11_MISC_FIXED_10X20 is not set
+# CONFIG_NXTERM is not set
+
+#
+# NX Multi-user only options
+#
+# CONFIG_NX_MULTIUSER is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+# CONFIG_MM_PGALLOC is not set
+
+#
+# Audio Support
+#
+CONFIG_AUDIO=y
+# CONFIG_AUDIO_MULTI_SESSION is not set
+
+#
+# Audio Buffer Configuration
+#
+# CONFIG_AUDIO_LARGE_BUFFERS is not set
+CONFIG_AUDIO_NUM_BUFFERS=8
+CONFIG_AUDIO_BUFFER_NUMBYTES=8192
+# CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS is not set
+
+#
+# Supported Audio Formats
+#
+# CONFIG_AUDIO_FORMAT_AC3 is not set
+# CONFIG_AUDIO_FORMAT_DTS is not set
+CONFIG_AUDIO_FORMAT_PCM=y
+# CONFIG_AUDIO_FORMAT_MP3 is not set
+# CONFIG_AUDIO_FORMAT_MIDI is not set
+# CONFIG_AUDIO_FORMAT_WMA is not set
+# CONFIG_AUDIO_FORMAT_OGG_VORBIS is not set
+
+#
+# Exclude Specific Audio Features
+#
+# CONFIG_AUDIO_EXCLUDE_VOLUME is not set
+# CONFIG_AUDIO_EXCLUDE_BALANCE is not set
+CONFIG_AUDIO_EXCLUDE_EQUALIZER=y
+# CONFIG_AUDIO_EXCLUDE_TONE is not set
+# CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME is not set
+# CONFIG_AUDIO_EXCLUDE_STOP is not set
+# CONFIG_AUDIO_EXCLUDE_FFORWARD is not set
+CONFIG_AUDIO_EXCLUDE_REWIND=y
+# CONFIG_AUDIO_CUSTOM_DEV_PATH is not set
+
+#
+# Binary Loader
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_LIBC_LOCALTIME is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+CONFIG_EXAMPLES_BUTTONS=y
+CONFIG_EXAMPLES_BUTTONS_MIN=0
+CONFIG_EXAMPLES_BUTTONS_MAX=0
+CONFIG_EXAMPLES_IRQBUTTONS_MIN=0
+CONFIG_EXAMPLES_IRQBUTTONS_MAX=0
+CONFIG_EXAMPLES_BUTTONS_NAME0="PB_USER"
+CONFIG_EXAMPLES_BUTTONS_NAME1="Button 1"
+CONFIG_EXAMPLES_BUTTONS_NAME2="Button 2"
+CONFIG_EXAMPLES_BUTTONS_NAME3="Button 3"
+CONFIG_EXAMPLES_BUTTONS_NAME4="Button 4"
+CONFIG_EXAMPLES_BUTTONS_NAME5="Button 5"
+CONFIG_EXAMPLES_BUTTONS_NAME6="Button 6"
+CONFIG_EXAMPLES_BUTTONS_NAME7="Button 7"
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+CONFIG_EXAMPLES_NX=y
+CONFIG_EXAMPLES_NX_VPLANE=0
+CONFIG_EXAMPLES_NX_DEVNO=0
+CONFIG_EXAMPLES_NX_DEFAULT_COLORS=y
+CONFIG_EXAMPLES_NX_DEFAULT_FONT=y
+CONFIG_EXAMPLES_NX_BPP=16
+# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set
+CONFIG_EXAMPLES_NX_TOOLBAR_HEIGHT=16
+# CONFIG_EXAMPLES_NX_EXTERNINIT is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RANDOM is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+CONFIG_EXAMPLES_TOUCHSCREEN=y
+CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
+CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
+# CONFIG_EXAMPLES_TOUCHSCREEN_MOUSE is not set
+CONFIG_EXAMPLES_TOUCHSCREEN_ARCHINIT=y
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_XMLRPC is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+# CONFIG_GRAPHICS_TRAVELER is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_BAS is not set
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+# CONFIG_INTERPRETERS_MICROPYTHON is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_DNSCLIENT is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_NETLIB=y
+# CONFIG_NETUTILS_WEBCLIENT is not set
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_NTPCLIENT is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Command Line Configuration
+#
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_LINELEN=80
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_PROC_MOUNTPOINT="/proc"
+CONFIG_NSH_FILEIOSIZE=512
+
+#
+# Scripting Support
+#
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+CONFIG_NSH_ROMFSETC=y
+# CONFIG_NSH_ROMFSRC is not set
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+# CONFIG_NSH_DEFAULTROMFS is not set
+CONFIG_NSH_ARCHROMFS=y
+# CONFIG_NSH_CUSTOMROMFS is not set
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT="/tmp"
+
+#
+# Console Configuration
+#
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_USBKBD is not set
+CONFIG_NSH_ARCHINIT=y
+
+#
+# Networking Configuration
+#
+CONFIG_NSH_NETINIT_THREAD=y
+CONFIG_NSH_NETINIT_THREAD_STACKSIZE=1568
+CONFIG_NSH_NETINIT_THREAD_PRIORITY=100
+
+#
+# IP Address Configuration
+#
+
+#
+# Target IPv6 address
+#
+CONFIG_NSH_IPv6ADDR_1=0xfc00
+CONFIG_NSH_IPv6ADDR_2=0x0000
+CONFIG_NSH_IPv6ADDR_3=0x0000
+CONFIG_NSH_IPv6ADDR_4=0x0000
+CONFIG_NSH_IPv6ADDR_5=0x0000
+CONFIG_NSH_IPv6ADDR_6=0x0000
+CONFIG_NSH_IPv6ADDR_7=0x0000
+CONFIG_NSH_IPv6ADDR_8=0x0002
+
+#
+# Router IPv6 address
+#
+CONFIG_NSH_DRIPv6ADDR_1=0xfc00
+CONFIG_NSH_DRIPv6ADDR_2=0x0000
+CONFIG_NSH_DRIPv6ADDR_3=0x0000
+CONFIG_NSH_DRIPv6ADDR_4=0x0000
+CONFIG_NSH_DRIPv6ADDR_5=0x0000
+CONFIG_NSH_DRIPv6ADDR_6=0x0000
+CONFIG_NSH_DRIPv6ADDR_7=0x0000
+CONFIG_NSH_DRIPv6ADDR_8=0x0001
+
+#
+# IPv6 Network mask
+#
+CONFIG_NSH_IPv6NETMASK_1=0xffff
+CONFIG_NSH_IPv6NETMASK_2=0xffff
+CONFIG_NSH_IPv6NETMASK_3=0xffff
+CONFIG_NSH_IPv6NETMASK_4=0xffff
+CONFIG_NSH_IPv6NETMASK_5=0xffff
+CONFIG_NSH_IPv6NETMASK_6=0xffff
+CONFIG_NSH_IPv6NETMASK_7=0xffff
+CONFIG_NSH_IPv6NETMASK_8=0xff80
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_SWMAC=y
+# CONFIG_NSH_ARCHMAC is not set
+CONFIG_NSH_MACADDR=0x00e0deadbeef
+CONFIG_NSH_MAX_ROUNDTRIP=20
+
+#
+# NxWidgets/NxWM
+#
+# CONFIG_NXWIDGETS is not set
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# CU Minimal Terminal
+#
+# CONFIG_SYSTEM_CUTERM is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+CONFIG_SYSTEM_I2CTOOL=y
+CONFIG_I2CTOOL_MINBUS=0
+CONFIG_I2CTOOL_MAXBUS=0
+CONFIG_I2CTOOL_MINADDR=0x03
+CONFIG_I2CTOOL_MAXADDR=0x77
+CONFIG_I2CTOOL_MAXREGADDR=0xff
+CONFIG_I2CTOOL_DEFFREQ=100000
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+CONFIG_SYSTEM_NXPLAYER=y
+CONFIG_NXPLAYER_PLAYTHREAD_STACKSIZE=1500
+CONFIG_NXPLAYER_COMMAND_LINE=y
+CONFIG_NXPLAYER_INCLUDE_HELP=y
+CONFIG_NXPLAYER_INCLUDE_DEVICE_SEARCH=y
+CONFIG_NXPLAYER_INCLUDE_PREFERRED_DEVICE=y
+CONFIG_NXPLAYER_FMT_FROM_EXT=y
+# CONFIG_NXPLAYER_FMT_FROM_HEADER is not set
+CONFIG_NXPLAYER_INCLUDE_MEDIADIR=y
+CONFIG_NXPLAYER_DEFAULT_MEDIADIR="/mnt/sdcard"
+CONFIG_NXPLAYER_RECURSIVE_MEDIA_SEARCH=y
+CONFIG_NXPLAYER_INCLUDE_SYSTEM_RESET=y
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# Temperature
+#
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/sama5d4-ek/ipv6/setenv.sh b/nuttx/configs/sama5d4-ek/ipv6/setenv.sh
new file mode 100755
index 000000000..1baedecb7
--- /dev/null
+++ b/nuttx/configs/sama5d4-ek/ipv6/setenv.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# configs/sama5d4-ek/ipv6/setenv.sh
+#
+#   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the Atmel GCC
+# toolchain under Windows.  You will also have to edit this if you install
+# this toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/sama5d4-ek/nsh/defconfig b/nuttx/configs/sama5d4-ek/nsh/defconfig
index 5a113a59a..d8d438d82 100644
--- a/nuttx/configs/sama5d4-ek/nsh/defconfig
+++ b/nuttx/configs/sama5d4-ek/nsh/defconfig
@@ -776,6 +776,7 @@ CONFIG_RAMLOG_BUFSIZE=16384
 # CONFIG_RAMLOG_CRLF is not set
 CONFIG_RAMLOG_NONBLOCKING=y
 CONFIG_RAMLOG_NPOLLWAITERS=4
+# CONFIG_SYSLOG_CONSOLE is not set
 
 #
 # Networking Support