diff options
author | Gregory Nutt <gnutt@nuttx.org> | 2013-09-25 17:23:03 -0600 |
---|---|---|
committer | Gregory Nutt <gnutt@nuttx.org> | 2013-09-25 17:23:03 -0600 |
commit | 54cd9689cccad1949c067f40d500491851799221 (patch) | |
tree | 0413e3c52da1dafc9a3db7671b37ccc12d38c715 /apps/examples/README.txt | |
parent | 55a34548ccc4fc7aa55ad585b007c7d77d8cf937 (diff) | |
download | nuttx-54cd9689cccad1949c067f40d500491851799221.tar.gz nuttx-54cd9689cccad1949c067f40d500491851799221.tar.bz2 nuttx-54cd9689cccad1949c067f40d500491851799221.zip |
Move apps/examples/cdcacm to apps/system/cdcacm
Diffstat (limited to 'apps/examples/README.txt')
-rw-r--r-- | apps/examples/README.txt | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/apps/examples/README.txt b/apps/examples/README.txt index 02e38061c..29dd6fa7d 100644 --- a/apps/examples/README.txt +++ b/apps/examples/README.txt @@ -131,50 +131,6 @@ examples/cc3000 This is a test for the TI CC3000 wireless networking module. -examples/cdcacm -^^^^^^^^^^^^^^^ - - This very simple example shows how a USB CDC/ACM serial can be dynamically - connected and disconnected from a host. This example can only be used as - an NSH built-int command. If built-in, then two new NSH commands will be - supported: - - 1. sercon - Connect the CDC/ACM serial device - 2. serdis - Disconnect the CDC/ACM serial device - - Configuration prequisites (not complete): - - CONFIG_USBDEV=y : USB device support must be enabled - CONFIG_CDCACM=y : The CDC/ACM driver must be built - CONFIG_NSH_BUILTIN_APPS : NSH built-in application support must be enabled - - Configuration options specific to this example: - - CONFIG_EXAMPLES_CDCACM_DEVMINOR : The minor number of the CDC/ACM device. - : i.e., the 'x' in /dev/ttyACMx - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB, or - CONFIG_USBDEV_TRACE), then the example code will also initialize the USB trace - output. The amount of trace output can be controlled using: - - CONFIG_EXAMPLES_CDCACM_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_CDCACM_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS - Show interrupt-related events. - - Note: This example is only enables or disable USB CDC/ACM via the NSH - 'sercon' and 'serdis' command. It will enable and disable tracing per - the settings before enabling and after disabling the CDC/ACM device. It - will not, however, monitor buffered trace data in the interim. If - CONFIG_USBDEV_TRACE is defined (and the debug options are not), other - application logic will need to monitor the buffered trace data. - examples/composite ^^^^^^^^^^^^^^^^^^ |