Add m68hc12 4.3.3 config

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2297 42af7a65-404d-4744-a932-0658087f49c3

2 files changed, 106 insertions, 2 deletions

diff --git a/misc/buildroot/configs/README.txt b/misc/buildroot/configs/README.txt
index 82ddeda9d..bfba22cb4 100644
--- a/misc/buildroot/configs/README.txt
+++ b/misc/buildroot/configs/README.txt
@@ -60,7 +60,10 @@ h8300_config
 	Builds an H8/300 toolchain using gcc 3.4.5
 
 m68hc11-config
-	Builds an hc11 toolchain using gcc 3.4.5
+	Builds an hc11/hc12 toolchain using gcc 3.4.5 .
+
+m68hc12-config-4.3.3
+	Builds an hc11/hc12 toolchain using gcc 4.3.3.
 
 m68k-config
 	Builds an M68K toolchain using gcc 3.4.5
@@ -205,4 +208,10 @@ Cygwin GCC BUILD NOTES
    the case, it could end-up making a bad toolchain??? In this case, you need
    to hit Control-C to stop the build.  Normally, however, the "Permission
    denied" error causes the configure script to stop.  In either case, if you
-   just restart the make, the build will continue past the failure point.
\ No newline at end of file
+   just restart the make, the build will continue past the failure point.
+
+   This has happened to me only while doing other intensive activities in
+   windows during the toolchain build.  I suspect if you leave your PC
+   mostly idle while the toolchain builds, this will not likely be a problem
+   for you.
+
diff --git a/misc/buildroot/configs/m68hc12-config-4.3.3 b/misc/buildroot/configs/m68hc12-config-4.3.3
new file mode 100644
index 000000000..05501789f
--- /dev/null
+++ b/misc/buildroot/configs/m68hc12-config-4.3.3
@@ -0,0 +1,95 @@
+#
+# Automatically generated make config: don't edit
+#
+BR2_HAVE_DOT_CONFIG=y
+# BR2_alpha is not set
+# BR2_arm is not set
+# BR2_armeb is not set
+# BR2_avr is not set
+# BR2_avr32 is not set
+# BR2_bfin is not set
+# BR2_cris is not set
+# BR2_i386 is not set
+# BR2_m32c is not set
+# BR2_m68k is not set
+# BR2_m68hc11 is not set
+BR2_m68hc12=y
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_nios2 is not set
+# BR2_powerpc is not set
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_h8300 is not set
+# BR2_sparc is not set
+# BR2_x86_64 is not set
+BR2_ARCH="m68hc12"
+BR2_ENDIAN="BIG"
+
+#
+# Build options
+#
+BR2_WGET="wget --passive-ftp"
+BR2_SVN="svn co"
+BR2_ZCAT="zcat"
+BR2_BZCAT="bzcat"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(BASE_DIR)/../archives"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+BR2_NUTTX_DIR="$(TOPDIR)/../nuttx"
+BR2_TOPDIR_PREFIX=""
+BR2_TOPDIR_SUFFIX=""
+BR2_GNU_BUILD_SUFFIX="m68k-elf"
+BR2_GNU_TARGET_SUFFIX="elf"
+# BR2_PREFER_IMA is not set
+# BR2_DEPRECATED is not set
+
+#
+# Toolchain Options
+#
+
+#
+# Binutils Options
+#
+# BR2_BINUTILS_VERSION_2_17 is not set
+# BR2_BINUTILS_VERSION_2_19 is not set
+BR2_BINUTILS_VERSION_2_19_1=y
+BR2_BINUTILS_VERSION="2.19.1"
+BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
+
+#
+# GCC Options
+#
+BR2_PACKAGE_GCC=y
+# BR2_GCC_VERSION_3_4_6 is not set
+# BR2_GCC_VERSION_4_2_4 is not set
+BR2_GCC_VERSION_4_3_3=y
+BR2_GCC_SUPPORTS_SYSROOT=y
+BR2_GCC_VERSION="4.3.3"
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+BR2_INSTALL_LIBSTDCPP=y
+# BR2_INSTALL_LIBGCJ is not set
+# BR2_INSTALL_OBJC is not set
+# BR2_INSTALL_FORTRAN is not set
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+# BR2_PACKAGE_GDB_SERVER is not set
+# BR2_PACKAGE_GDB_HOST is not set
+
+#
+# NuttX Binary Support
+#
+BR2_PACKAGE_GENROMFS=y
+
+#
+# Common Toolchain Options
+#
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+# BR2_ENABLE_MULTILIB is not set
+BR2_LARGEFILE=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"