twr-k60n512 configurations converted to use the kconfig-frontends tools

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5785 42af7a65-404d-4744-a932-0658087f49c3

8 files changed, 1104 insertions, 854 deletions

diff --git a/nuttx/arch/arm/src/kinetis/Kconfig b/nuttx/arch/arm/src/kinetis/Kconfig
index 6c1e36425..c444c065f 100644
--- a/nuttx/arch/arm/src/kinetis/Kconfig
+++ b/nuttx/arch/arm/src/kinetis/Kconfig
@@ -340,36 +340,36 @@ endmenu
 comment "Kinetis GPIO Interrupt Configuration"
 
 config GPIO_IRQ
-	bool "GPIO interrupts"
+	bool "GPIO pin interrupts"
 	---help---
-		Enable support for interrupt GPIO pins
+		Enable support for interrupting GPIO pins
 
 if GPIO_IRQ
 
 config KINETIS_PORTAINTS
 	bool "GPIOA interrupts"
 	---help---
-		Enable support for interrupts from GPIO port A pins
+		Enable support for 32 interrupts from GPIO port A pins
 
 config KINETIS_PORTBINTS
 	bool "GPIOB interrupts"
 	---help---
-		Enable support for interrupts from GPIO port B pins
+		Enable support for 32 interrupts from GPIO port B pins
 
 config KINETIS_PORTCINTS
 	bool "GPIOC interrupts"
 	---help---
-		Enable support for interrupts from GPIO port C pins
+		Enable support for 32 interrupts from GPIO port C pins
 
 config KINETIS_PORTDINTS
 	bool "GPIOD interrupts"
 	---help---
-		Enable support for interrupts from GPIO port D pins
+		Enable support for 32 interrupts from GPIO port D pins
 
 config KINETIS_PORTEINTS
 	bool "GPIOE interrupts"
 	---help---
-		Enable support for interrupts from GPIO port E pins
+		Enable support for 32 interrupts from GPIO port E pins
 
 endif
 
@@ -394,13 +394,15 @@ config ENET_NRXBUFFERS
 	int "Number of Ethernet Rx buffers"
 	default 6
 	---help---
-		Number of Ethernet Rx buffers to use.
+		Number of Ethernet Rx buffers to use.  The size of one buffer is
+		determined by CONFIG_NET_BUFSIZE
 
 config ENET_NTXBUFFERS
 	int "Number of Ethernet Tx buffers"
 	default 2
 	---help---
-		Number of Ethernet Tx buffers to use.
+		Number of Ethernet Tx buffers to use. The size of one buffer is
+		determined by CONFIG_NET_BUFSIZE
 
 config ENET_PHYADDR
 	int "PHY address"
diff --git a/nuttx/configs/kwikstik-k40/README.txt b/nuttx/configs/kwikstik-k40/README.txt
index a49936e65..d08f6bb35 100644
--- a/nuttx/configs/kwikstik-k40/README.txt
+++ b/nuttx/configs/kwikstik-k40/README.txt
@@ -458,7 +458,9 @@ KwikStik-K40-specific Configuration Options
     CONFIG_KINETIS_PIT      -- Support Programmable Interval Timers
     CONFIG_ARMV7M_MPU       -- Support the MPU
 
-  Kinetis interrupt priorities (Default is the mid priority)
+  Kinetis interrupt priorities (Default is the mid priority)  These should
+  not be set because they can cause unhandled, nested interrupts.  All
+  interrupts need to be at the default priority in the current design.
 
     CONFIG_KINETIS_UART0PRIO
     CONFIG_KINETIS_UART1PRIO
diff --git a/nuttx/configs/kwikstik-k40/ostest/defconfig b/nuttx/configs/kwikstik-k40/ostest/defconfig
index 7b806d611..16b3bd321 100755
--- a/nuttx/configs/kwikstik-k40/ostest/defconfig
+++ b/nuttx/configs/kwikstik-k40/ostest/defconfig
@@ -233,9 +233,9 @@ CONFIG_RR_INTERVAL=200
 CONFIG_TASK_NAME_SIZE=0
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_JULIAN_TIME is not set
-CONFIG_START_YEAR=2009
-CONFIG_START_MONTH=9
-CONFIG_START_DAY=21
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=25
 CONFIG_DEV_CONSOLE=y
 # CONFIG_MUTEX_TYPES is not set
 # CONFIG_PRIORITY_INHERITANCE is not set
diff --git a/nuttx/configs/twr-k60n512/README.txt b/nuttx/configs/twr-k60n512/README.txt
index 4ed32411b..6a99f189f 100644
--- a/nuttx/configs/twr-k60n512/README.txt
+++ b/nuttx/configs/twr-k60n512/README.txt
@@ -595,7 +595,9 @@ TWR-K60N512-specific Configuration Options
     CONFIG_KINETIS_PIT      -- Support Programmable Interval Timers
     CONFIG_ARMV7M_MPU       -- Support the MPU
 
-  Kinetis interrupt priorities (Default is the mid priority)
+  Kinetis interrupt priorities (Default is the mid priority).  These should
+  not be set because they can cause unhandled, nested interrupts.  All
+  interrupts need to be at the default priority in the current design.
 
     CONFIG_KINETIS_UART0PRIO
     CONFIG_KINETIS_UART1PRIO
@@ -613,7 +615,7 @@ TWR-K60N512-specific Configuration Options
 
   PIN Interrupt Support
 
-    CONFIG_GPIO_IRQ          -- Enable pin interrtup support.  Also needs
+    CONFIG_GPIO_IRQ          -- Enable pin interrupt support.  Also needs
       one or more of the following:
     CONFIG_KINETIS_PORTAINTS -- Support 32 Port A interrupts
     CONFIG_KINETIS_PORTBINTS -- Support 32 Port B interrupts
@@ -639,7 +641,7 @@ TWR-K60N512-specific Configuration Options
         buffer is determined by CONFIG_NET_BUFSIZE.  Default: 6
     CONFIG_ENET_NTXBUFFERS - Number of TX buffers.  The size of one
         buffer is determined by CONFIG_NET_BUFSIZE.  Default: 2
-    CONFIG_ENET_USEMII - Usee MII mode.  Default: RMII mode.
+    CONFIG_ENET_USEMII - Use MII mode.  Default: RMII mode.
     CONFIG_ENET_PHYADDR - PHY address
  
 Configurations
@@ -660,7 +662,23 @@ Where <subdir> is one of the following:
     This configuration directory, performs a simple OS test using
     examples/ostest.
 
-    CONFIG_KINETIS_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
 
   nsh:
   ---
@@ -669,23 +687,42 @@ Where <subdir> is one of the following:
     Support for the board's SPI-based MicroSD card is included
     (but not passing tests as of this writing).
 
-    NOTE: An SDHC driver is underwork and can be enabled in the NSH
-    configuration for further testing be setting the following
-    configuration faluesas follows:
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
 
-      -CONFIG_KINETIS_SDHC=n
-      +CONFIG_KINETIS_SDHC=y         # Enable the SDHC driver
+    3. An SDHC driver is under work and can be enabled in the NSH configuration
+       for further testing be setting the following configuration values as
+       follows:
 
-      -CONFIG_GPIO_IRQ=n
-      +CONFIG_GPIO_IRQ=y             # Enable GPIO interrupts
+      CONFIG_KINETIS_SDHC=y                : Enable the SDHC driver
 
-      -CONFIG_KINETIS_PORTEINTS=n
-      +CONFIG_KINETIS_PORTEINTS=y    # Enable PortE GPIO interrupts
+      CONFIG_MMCSD=y                       : Enable MMC/SD support
+      CONFIG_MMCSD_SDIO=y                  : Use the SDIO-based MMC/SD driver
+      CONFIG_MMCSD_NSLOTS=1                : One MMC/SD slot
 
-      -CONFIG_SCHED_WORKQUEUE=n
-      +CONFIG_SCHED_WORKQUEUE=y      # Enable the NuttX workqueue
+      CONFIG_FAT=y                         : Eable FAT file system
+      CONFIG_FAT_LCNAMES=y                 : FAT lower case name support
+      CONFIG_FAT_LFN=y                     : FAT long file name support
+      CONFIG_FAT_MAXFNAME=32               : Maximum lenght of a long file name
 
-      -CONFIG_NSH_ARCHINIT=n
-      +CONFIG_NSH_ARCHINIT=y         # Provide NSH intialization logic
+      CONFIG_GPIO_IRQ=y                    : Enable GPIO interrupts
+      CONFIG_KINETIS_PORTEINTS=y           : Enable PortE GPIO interrupts
 
+      CONFIG_SCHED_WORKQUEUE=y             : Enable the NuttX workqueue
 
+      CONFIG_NSH_ARCHINIT=y                : Provide NSH intialization logic
diff --git a/nuttx/configs/twr-k60n512/nsh/appconfig b/nuttx/configs/twr-k60n512/nsh/appconfig
deleted file mode 100644
index 456ddc8e9..000000000
--- a/nuttx/configs/twr-k60n512/nsh/appconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-############################################################################
-# configs/twr-k60n512/nsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
diff --git a/nuttx/configs/twr-k60n512/nsh/defconfig b/nuttx/configs/twr-k60n512/nsh/defconfig
index f678f06cd..67a91380f 100644
--- a/nuttx/configs/twr-k60n512/nsh/defconfig
+++ b/nuttx/configs/twr-k60n512/nsh/defconfig
@@ -1,257 +1,269 @@
-############################################################################
-# configs/twr-k60n512/nsh/defconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_CHIP="kinetis"
-CONFIG_ARCH_CHIP_MK60N512VMD100=y
-CONFIG_ARCH_BOARD="twr-k60n512"
-CONFIG_ARCH_BOARD_TWR_K60N512=y
-CONFIG_BOARD_LOOPSPERMSEC=9535
-CONFIG_DRAM_START=0x1fff0000
-CONFIG_DRAM_SIZE=131072
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
-CONFIG_ARCH_FPU=n
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
 
 #
-# Identify toolchain and linker options
+# Build Setup
 #
-CONFIG_KINETIS_CODESOURCERYW=n
-CONFIG_KINETIS_CODESOURCERYL=n
-CONFIG_KINETIS_DEVKITARM=n
-CONFIG_KINETIS_BUILDROOT=y
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
 
 #
-# Individual subsystems can be enabled:
+# Build Configuration
 #
-CONFIG_KINETIS_TRACE=n
-CONFIG_KINETIS_FLEXBUS=n
-CONFIG_KINETIS_UART0=n
-CONFIG_KINETIS_UART1=n
-CONFIG_KINETIS_UART2=n
-CONFIG_KINETIS_UART3=y
-CONFIG_KINETIS_UART4=n
-CONFIG_KINETIS_UART5=n
-CONFIG_KINETIS_ENET=n
-CONFIG_KINETIS_RNGB=n
-CONFIG_KINETIS_FLEXCAN0=n
-CONFIG_KINETIS_FLEXCAN1=n
-CONFIG_KINETIS_SPI0=n
-CONFIG_KINETIS_SPI1=n
-CONFIG_KINETIS_SPI2=n
-CONFIG_KINETIS_I2C0=n
-CONFIG_KINETIS_I2C1=n
-CONFIG_KINETIS_I2S=n
-CONFIG_KINETIS_DAC0=n
-CONFIG_KINETIS_DAC1=n
-CONFIG_KINETIS_ADC0=n
-CONFIG_KINETIS_ADC1=n
-CONFIG_KINETIS_CMP=n
-CONFIG_KINETIS_VREF=n
-CONFIG_KINETIS_SDHC=n
-CONFIG_KINETIS_FTM0=n
-CONFIG_KINETIS_FTM1=n
-CONFIG_KINETIS_FTM2=n
-CONFIG_KINETIS_LPTIMER=n
-CONFIG_KINETIS_RTC=n
-CONFIG_KINETIS_SLCD=n
-CONFIG_KINETIS_EWM=n
-CONFIG_KINETIS_CMT=n
-CONFIG_KINETIS_USBOTG=n
-CONFIG_KINETIS_USBDCD=n
-CONFIG_KINETIS_LLWU=n
-CONFIG_KINETIS_TSI=n
-CONFIG_KINETIS_FTFL=n
-CONFIG_KINETIS_DMA=n
-CONFIG_KINETIS_CRC=n
-CONFIG_KINETIS_PDB=n
-CONFIG_KINETIS_PIT=n
-CONFIG_ARMV7M_MPU=n
-
-#
-# PIN Interrupt Support
-#
-CONFIG_GPIO_IRQ=n
-CONFIG_KINETIS_PORTAINTS=n
-CONFIG_KINETIS_PORTBINTS=n
-CONFIG_KINETIS_PORTCINTS=n
-CONFIG_KINETIS_PORTDINTS=n
-CONFIG_KINETIS_PORTEINTS=n
-
-#
-# K40X256VLQ100 specific serial device driver settings
-#
-CONFIG_UART0_SERIAL_CONSOLE=n
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART3_SERIAL_CONSOLE=y
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
 
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
 
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
 
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
 
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
 
-CONFIG_UART0_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+CONFIG_ARCH_CHIP_KINETIS=y
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="kinetis"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
 
 #
-# General build options
+# ARMV7M Configuration Options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
+CONFIG_ARMV7M_OABI_TOOLCHAIN=y
 
 #
-# General OS setup
+# Kinetis Configuration Options
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_FS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2009
-CONFIG_START_MONTH=9
-CONFIG_START_DAY=21
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-CONFIG_SCHED_WAITPID=y
+# CONFIG_ARCH_CHIP_MK40N512VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40N512VMD100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VMD100 is not set
+# CONFIG_ARCH_CHIP_MK40X256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40X256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N512VLQ100 is not set
+CONFIG_ARCH_CHIP_MK60N512VMD100=y
+# CONFIG_ARCH_CHIP_MK60X256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60X256VMD100 is not set
+# CONFIG_ARCH_FAMILY_K40 is not set
+CONFIG_ARCH_FAMILY_K60=y
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Kinetis Peripheral Support
 #
-# There are certain dependency relationships in these
-# features.
+# CONFIG_KINETIS_TRACE is not set
+# CONFIG_KINETIS_FLEXBUS is not set
+# CONFIG_KINETIS_UART0 is not set
+# CONFIG_KINETIS_UART1 is not set
+# CONFIG_KINETIS_UART2 is not set
+CONFIG_KINETIS_UART3=y
+# CONFIG_KINETIS_UART4 is not set
+# CONFIG_KINETIS_UART5 is not set
+# CONFIG_KINETIS_ENET is not set
+# CONFIG_KINETIS_RNGB is not set
+# CONFIG_KINETIS_FLEXCAN0 is not set
+# CONFIG_KINETIS_FLEXCAN1 is not set
+# CONFIG_KINETIS_SPI0 is not set
+# CONFIG_KINETIS_SPI1 is not set
+# CONFIG_KINETIS_SPI2 is not set
+# CONFIG_KINETIS_I2C0 is not set
+# CONFIG_KINETIS_I2C1 is not set
+# CONFIG_KINETIS_I2S is not set
+# CONFIG_KINETIS_DAC0 is not set
+# CONFIG_KINETIS_DAC1 is not set
+# CONFIG_KINETIS_ADC0 is not set
+# CONFIG_KINETIS_ADC1 is not set
+# CONFIG_KINETIS_CMP is not set
+# CONFIG_KINETIS_VREF is not set
+# CONFIG_KINETIS_SDHC is not set
+# CONFIG_KINETIS_FTM0 is not set
+# CONFIG_KINETIS_FTM1 is not set
+# CONFIG_KINETIS_FTM2 is not set
+# CONFIG_KINETIS_LPTIMER is not set
+# CONFIG_KINETIS_RTC is not set
+# CONFIG_KINETIS_EWM is not set
+# CONFIG_KINETIS_CMT is not set
+# CONFIG_KINETIS_USBOTG is not set
+# CONFIG_KINETIS_USBDCD is not set
+# CONFIG_KINETIS_LLWU is not set
+# CONFIG_KINETIS_TSI is not set
+# CONFIG_KINETIS_FTFL is not set
+# CONFIG_KINETIS_DMA is not set
+# CONFIG_KINETIS_CRC is not set
+# CONFIG_KINETIS_PDB is not set
+# CONFIG_KINETIS_PIT is not set
+
+#
+# Kinetis GPIO Interrupt Configuration
+#
+# CONFIG_GPIO_IRQ is not set
+
+#
+# Kinetis UART Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_HAVE_RAMFUNCS=y
+CONFIG_ARCH_RAMFUNCS=y
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Board Settings
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
-CONFIG_DISABLE_POLL=y
+CONFIG_BOARD_LOOPSPERMSEC=9535
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x1fff0000
+CONFIG_DRAM_SIZE=131072
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
 
 #
-# Misc libc settings
+# Boot options
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# Allow for architecture optimized implementations
+# Board Selection
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
+CONFIG_ARCH_BOARD_TWR_K60N512=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="twr-k60n512"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=25
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
 # Sizes of configurable things (0 disables)
@@ -262,8 +274,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -271,202 +281,366 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Filesystem configuration
+# Stack and heap information
 #
-CONFIG_FS_FAT=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Maintain legacy build behavior (revisit)
+# Device Drivers
 #
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART3=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART3_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
+#
+# UART3 Configuration
+#
+CONFIG_UART3_RXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+CONFIG_UART3_BAUD=115200
+CONFIG_UART3_BITS=8
+CONFIG_UART3_PARITY=0
+CONFIG_UART3_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# SPI-based MMC/SD driver
+# System Logging Device Options
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
 
 #
-# Block driver buffering
+# System Logging
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
+# CONFIG_RAMLOG is not set
 
 #
-# SDIO-based MMC/SD driver
+# Networking Support
 #
-CONFIG_SDIO_DMA=n
-CONFIG_SDIO_XFRDEBUG=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
+# CONFIG_NET is not set
 
 #
-# TCP/IP and UDP support via uIP
+# File Systems
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
 
 #
-# UIP Network Utilities
+# File system configuration
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+# CONFIG_FAT_LCNAMES is not set
+# CONFIG_FAT_LFN is not set
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
 
 #
-# USB Device Configuration
+# Binary Formats
 #
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
 #
-# USB Serial Device Configuration
+# Library Routines
 #
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
 
 #
-# USB Storage Device Configuration
+# Standard C Library Options
 #
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
-# Settings for examples/uip
+# Non-standard Library Support
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
 
 #
-# Settings for examples/ostest
+# Built-In Applications
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 
 #
-# Settings for apps/nshlib
-#
-CONFIG_NSH_BUILTIN_APPS=n
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64
 CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
 CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Settings for examples/usbserial
+# USB Trace Support
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# NxWidgets/NxWM
+#
 
 #
-# Stack and heap information
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_ARCH_RAMFUNCS=y
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
diff --git a/nuttx/configs/twr-k60n512/ostest/appconfig b/nuttx/configs/twr-k60n512/ostest/appconfig
deleted file mode 100644
index d1ec3edb2..000000000
--- a/nuttx/configs/twr-k60n512/ostest/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/twr-k60n512/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-
diff --git a/nuttx/configs/twr-k60n512/ostest/defconfig b/nuttx/configs/twr-k60n512/ostest/defconfig
index ce99f3fa6..db6b2cc6f 100644
--- a/nuttx/configs/twr-k60n512/ostest/defconfig
+++ b/nuttx/configs/twr-k60n512/ostest/defconfig
@@ -1,255 +1,268 @@
-############################################################################
-# configs/twr-k60n512/ostest/defconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+CONFIG_ARCH_CHIP_KINETIS=y
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="kinetis"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
+CONFIG_ARMV7M_OABI_TOOLCHAIN=y
+
+#
+# Kinetis Configuration Options
+#
+# CONFIG_ARCH_CHIP_MK40N512VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40N512VMD100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VMD100 is not set
+# CONFIG_ARCH_CHIP_MK40X256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40X256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N512VLQ100 is not set
 CONFIG_ARCH_CHIP_MK60N512VMD100=y
-CONFIG_ARCH_BOARD="twr-k60n512"
-CONFIG_ARCH_BOARD_TWR_K60N512=y
+# CONFIG_ARCH_CHIP_MK60X256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60X256VMD100 is not set
+# CONFIG_ARCH_FAMILY_K40 is not set
+CONFIG_ARCH_FAMILY_K60=y
+
+#
+# Kinetis Peripheral Support
+#
+# CONFIG_KINETIS_TRACE is not set
+# CONFIG_KINETIS_FLEXBUS is not set
+# CONFIG_KINETIS_UART0 is not set
+# CONFIG_KINETIS_UART1 is not set
+# CONFIG_KINETIS_UART2 is not set
+CONFIG_KINETIS_UART3=y
+# CONFIG_KINETIS_UART4 is not set
+# CONFIG_KINETIS_UART5 is not set
+# CONFIG_KINETIS_ENET is not set
+# CONFIG_KINETIS_RNGB is not set
+# CONFIG_KINETIS_FLEXCAN0 is not set
+# CONFIG_KINETIS_FLEXCAN1 is not set
+# CONFIG_KINETIS_SPI0 is not set
+# CONFIG_KINETIS_SPI1 is not set
+# CONFIG_KINETIS_SPI2 is not set
+# CONFIG_KINETIS_I2C0 is not set
+# CONFIG_KINETIS_I2C1 is not set
+# CONFIG_KINETIS_I2S is not set
+# CONFIG_KINETIS_DAC0 is not set
+# CONFIG_KINETIS_DAC1 is not set
+# CONFIG_KINETIS_ADC0 is not set
+# CONFIG_KINETIS_ADC1 is not set
+# CONFIG_KINETIS_CMP is not set
+# CONFIG_KINETIS_VREF is not set
+# CONFIG_KINETIS_SDHC is not set
+# CONFIG_KINETIS_FTM0 is not set
+# CONFIG_KINETIS_FTM1 is not set
+# CONFIG_KINETIS_FTM2 is not set
+# CONFIG_KINETIS_LPTIMER is not set
+# CONFIG_KINETIS_RTC is not set
+# CONFIG_KINETIS_EWM is not set
+# CONFIG_KINETIS_CMT is not set
+# CONFIG_KINETIS_USBOTG is not set
+# CONFIG_KINETIS_USBDCD is not set
+# CONFIG_KINETIS_LLWU is not set
+# CONFIG_KINETIS_TSI is not set
+# CONFIG_KINETIS_FTFL is not set
+# CONFIG_KINETIS_DMA is not set
+# CONFIG_KINETIS_CRC is not set
+# CONFIG_KINETIS_PDB is not set
+# CONFIG_KINETIS_PIT is not set
+
+#
+# Kinetis GPIO Interrupt Configuration
+#
+# CONFIG_GPIO_IRQ is not set
+
+#
+# Kinetis UART Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_HAVE_RAMFUNCS=y
+CONFIG_ARCH_RAMFUNCS=y
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
 CONFIG_BOARD_LOOPSPERMSEC=9535
+# CONFIG_ARCH_CALIBRATION is not set
 CONFIG_DRAM_START=0x1fff0000
 CONFIG_DRAM_SIZE=131072
-CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
 CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
-CONFIG_ARCH_FPU=n
 
 #
-# Identify toolchain and linker options
+# Boot options
 #
-CONFIG_KINETIS_CODESOURCERYW=n
-CONFIG_KINETIS_CODESOURCERYL=n
-CONFIG_KINETIS_DEVKITARM=n
-CONFIG_KINETIS_BUILDROOT=y
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# Individual subsystems can be enabled:
+# Board Selection
 #
-CONFIG_KINETIS_TRACE=n
-CONFIG_KINETIS_FLEXBUS=n
-CONFIG_KINETIS_UART0=n
-CONFIG_KINETIS_UART1=n
-CONFIG_KINETIS_UART2=n
-CONFIG_KINETIS_UART3=y
-CONFIG_KINETIS_UART4=n
-CONFIG_KINETIS_UART5=n
-CONFIG_KINETIS_ENET=n
-CONFIG_KINETIS_RNGB=n
-CONFIG_KINETIS_FLEXCAN0=n
-CONFIG_KINETIS_FLEXCAN1=n
-CONFIG_KINETIS_SPI0=n
-CONFIG_KINETIS_SPI1=n
-CONFIG_KINETIS_SPI2=n
-CONFIG_KINETIS_I2C0=n
-CONFIG_KINETIS_I2C1=n
-CONFIG_KINETIS_I2S=n
-CONFIG_KINETIS_DAC0=n
-CONFIG_KINETIS_DAC1=n
-CONFIG_KINETIS_ADC0=n
-CONFIG_KINETIS_ADC1=n
-CONFIG_KINETIS_CMP=n
-CONFIG_KINETIS_VREF=n
-CONFIG_KINETIS_SDHC=n
-CONFIG_KINETIS_FTM0=n
-CONFIG_KINETIS_FTM1=n
-CONFIG_KINETIS_FTM2=n
-CONFIG_KINETIS_LPTIMER=n
-CONFIG_KINETIS_RTC=n
-CONFIG_KINETIS_SLCD=n
-CONFIG_KINETIS_EWM=n
-CONFIG_KINETIS_CMT=n
-CONFIG_KINETIS_USBOTG=n
-CONFIG_KINETIS_USBDCD=n
-CONFIG_KINETIS_LLWU=n
-CONFIG_KINETIS_TSI=n
-CONFIG_KINETIS_FTFL=n
-CONFIG_KINETIS_DMA=n
-CONFIG_KINETIS_CRC=n
-CONFIG_KINETIS_PDB=n
-CONFIG_KINETIS_PIT=n
-CONFIG_ARMV7M_MPU=n
-
-#
-# PIN Interrupt Support
-#
-CONFIG_GPIO_IRQ=n
-CONFIG_KINETIS_PORTAINTS=n
-CONFIG_KINETIS_PORTBINTS=n
-CONFIG_KINETIS_PORTCINTS=n
-CONFIG_KINETIS_PORTDINTS=n
-CONFIG_KINETIS_PORTEINTS=n
-
-#
-# K40X256VLQ100 specific serial device driver settings
-#
-CONFIG_UART0_SERIAL_CONSOLE=n
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART3_SERIAL_CONSOLE=y
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
+CONFIG_ARCH_BOARD_TWR_K60N512=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="twr-k60n512"
 
-CONFIG_UART0_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
 
 #
-# General build options
+# Board-Specific Options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
 
 #
-# General OS setup
+# RTOS Features
 #
-CONFIG_USER_ENTRYPOINT="ostest_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2009
-CONFIG_START_MONTH=9
-CONFIG_START_DAY=21
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=25
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
 CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
+# Signal Numbers
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
 # Sizes of configurable things (0 disables)
@@ -260,8 +273,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -269,200 +280,305 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Filesystem configuration
+# Stack and heap information
 #
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Maintain legacy build behavior (revisit)
+# Device Drivers
 #
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART3=y
+CONFIG_MCU_SERIAL=y
+CONFIG_UART3_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
+#
+# UART3 Configuration
+#
+CONFIG_UART3_RXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+CONFIG_UART3_BAUD=115200
+CONFIG_UART3_BITS=8
+CONFIG_UART3_PARITY=0
+CONFIG_UART3_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# SPI-based MMC/SD driver
+# System Logging Device Options
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
 
 #
-# Block driver buffering
+# System Logging
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
+# CONFIG_RAMLOG is not set
 
 #
-# SDIO-based MMC/SD driver
+# Networking Support
 #
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
+# CONFIG_NET is not set
 
 #
-# TCP/IP and UDP support via uIP
+# File Systems
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
 
 #
-# UIP Network Utilities
+# File system configuration
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_FS_RAMMAP is not set
 
 #
-# USB Device Configuration
+# System Logging
 #
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
 
 #
-# USB Serial Device Configuration
+# Graphics Support
 #
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
+# CONFIG_NX is not set
 
 #
-# USB Storage Device Configuration
+# Memory Management
 #
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
 
 #
-# Settings for examples/uip
+# Binary Formats
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Library Routines
+#
 
 #
-# Settings for examples/ostest
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
 #
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
 CONFIG_EXAMPLES_OSTEST_LOOPS=1
 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
 
 #
-# Settings for apps/nshlib
+# Graphics Support
 #
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+# CONFIG_TIFF is not set
 
 #
-# Architecture-specific NSH options
+# Interpreters
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
-# Settings for examples/usbserial
+# Network Utilities
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
 
 #
-# Stack and heap information
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_ARCH_RAMFUNCS=y
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048