diff options
-rw-r--r-- | nuttx/configs/sam4l-xplained/README.txt | 6 | ||||
-rw-r--r-- | nuttx/configs/sam4l-xplained/src/sam_mmcsd.c | 2 | ||||
-rw-r--r-- | nuttx/drivers/mmcsd/mmcsd_spi.c | 12 |
3 files changed, 13 insertions, 7 deletions
diff --git a/nuttx/configs/sam4l-xplained/README.txt b/nuttx/configs/sam4l-xplained/README.txt index d87a566b3..79b6f5bc8 100644 --- a/nuttx/configs/sam4l-xplained/README.txt +++ b/nuttx/configs/sam4l-xplained/README.txt @@ -719,3 +719,9 @@ Configuration sub-directories Application Configuration -> NSH Library CONFIG_NSH_ARCHINIT=y : Board has architecture-specific initialization + + NOTE: If you enable the I/O1 this configuration with USART0 as the + console and with the I/O1 module in EXT1, you *must* remove UART + jumper. Otherwise, you have lookpack on USART0 and NSH will *not* + behave very well (since its outgoing prompts also appear as incoming + commands). diff --git a/nuttx/configs/sam4l-xplained/src/sam_mmcsd.c b/nuttx/configs/sam4l-xplained/src/sam_mmcsd.c index e922b8f9c..be4a334ec 100644 --- a/nuttx/configs/sam4l-xplained/src/sam_mmcsd.c +++ b/nuttx/configs/sam4l-xplained/src/sam_mmcsd.c @@ -86,7 +86,6 @@ int sam_sdinitialize(int minor) { -#ifdef HAVE_MMCSD FAR struct spi_dev_s *spi; int ret; @@ -118,7 +117,6 @@ int sam_sdinitialize(int minor) fvdbg("Successfuly bound SPI port %d to MMC/SD slot %d\n", SAM34_MMCSDSPIPORTNO, SAM34_MMCSDSLOTNO); -#endif return OK; } diff --git a/nuttx/drivers/mmcsd/mmcsd_spi.c b/nuttx/drivers/mmcsd/mmcsd_spi.c index 8c4eb4429..71fe5c625 100644 --- a/nuttx/drivers/mmcsd/mmcsd_spi.c +++ b/nuttx/drivers/mmcsd/mmcsd_spi.c @@ -348,7 +348,10 @@ static void mmcsd_semtake(FAR struct mmcsd_slot_s *slot) #ifndef CONFIG_SPI_OWNBUS (void)SPI_LOCK(slot->spi, true); - /* Set the frequency, as some other driver could have changed it. */ + /* Set the frequency, as some other driver could have changed it. + * TODO: Also need to restore mode and number-of-bits. Those can also + * change from SPI device-to-device. + */ SPI_SETFREQUENCY(slot->spi, slot->spispeed); #endif @@ -694,9 +697,9 @@ static void mmcsd_decodecsd(FAR struct mmcsd_slot_s *slot, uint8_t *csd) } /* Store the value for future use */ - + slot->spispeed = frequency; - + /* Set the actual SPI frequency as close as possible to that value */ frequency = SPI_SETFREQUENCY(spi, frequency); @@ -1253,7 +1256,6 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer, size_t nbytes; off_t offset; uint8_t response; - int ret; int i; fvdbg("start_sector=%d nsectors=%d\n", start_sector, nsectors); @@ -1394,7 +1396,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer, /* Wait until the card is no longer busy */ - ret = mmcsd_waitready(slot); + (void)mmcsd_waitready(slot); SPI_SELECT(spi, SPIDEV_MMCSD, false); SPI_SEND(spi, 0xff); mmcsd_semgive(slot); |