diff options
25 files changed, 2387 insertions, 44 deletions
diff --git a/apps/ChangeLog.txt b/apps/ChangeLog.txt index 25c531d40..3e031c4e3 100755 --- a/apps/ChangeLog.txt +++ b/apps/ChangeLog.txt @@ -53,4 +53,8 @@ * nshlib/nsh_netcmds.c: If a network device name and IP address are provided with the ifconfig command, then this command will now set the network address. (Contributed by Yu Qiang). + * netutils/ftpc: A library to support client-side FTP. + * examples/ftpc: A simple add-on to the NSH. From NSH, you can start + this simple FTP shell to transfer files to/from a remote FTP server. + diff --git a/apps/examples/Makefile b/apps/examples/Makefile index 18a395fb1..d4e96c11a 100644 --- a/apps/examples/Makefile +++ b/apps/examples/Makefile @@ -37,7 +37,7 @@ # Sub-directories -SUBDIRS = dhcpd hello helloxx hidkbd igmp mm mount nettest nsh null nx \ +SUBDIRS = dhcpd ftpc hello helloxx hidkbd igmp mm mount nettest nsh null nx \ nxffs nxflat ostest pashello pipe poll rgmp romfs sendmail serloop \ thttpd udp uip usbserial usbstorage wget wlan diff --git a/apps/examples/README.txt b/apps/examples/README.txt index a8216be39..f14037e72 100644 --- a/apps/examples/README.txt +++ b/apps/examples/README.txt @@ -48,6 +48,21 @@ examples/dhcpd CONFIGURED_APPS += uiplib +examples/ftpc +^^^^^^^^^^^^^ + + This is a simple FTP client shell used to exercise the capabilities + of the FTPC library (apps/netutils/ftpc). This example is configured + to that it will only work as a "built-in" program that can be run from + NSH when CONFIG_NSH_BUILTIN_APPS is defined. + + From NSH, the startup command line is then: + + ftpc xx.xx.xx.xx[:pp] + + where xx.xx.xx.xx is the IP address of the FTP server and pp is an + optional port number. + examples/hello ^^^^^^^^^^^^^^ diff --git a/apps/examples/ftpc/Makefile b/apps/examples/ftpc/Makefile new file mode 100644 index 000000000..ff2ec543b --- /dev/null +++ b/apps/examples/ftpc/Makefile @@ -0,0 +1,105 @@ +############################################################################ +# apps/examples/ftpc/Makefile +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/.config +-include $(TOPDIR)/Make.defs +include $(APPDIR)/Make.defs + +# FTPC Client Application + +APPNAME = ftpc +PRIORITY = SCHED_PRIORITY_DEFAULT +STACKSIZE = 4096 + +ASRCS = +CSRCS = ftpc_main.c ftpc_cmds.c + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ifeq ($(WINTOOL),y) + BIN = "${shell cygpath -w $(APPDIR)/libapps$(LIBEXT)}" +else + BIN = "$(APPDIR)/libapps$(LIBEXT)" +endif + +ROOTDEPPATH = --dep-path . + +# Common build + +VPATH = + +all: .built +.PHONY: context depend clean distclean + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +.built: $(OBJS) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $(BIN), $${obj}); \ + done ; ) + @touch .built + +# Register application + +.context: + $(call REGISTER,$(APPNAME),$(PRIORITY),$(STACKSIZE),$(APPNAME)_main) + @touch $@ + +context: .context + +# Create dependencies + +.depend: Makefile $(SRCS) + @$(MKDEP) $(ROOTDEPPATH) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f *.o *~ .*.swp .built + $(call CLEAN) + +distclean: clean + @rm -f .context Make.dep .depend + +-include Make.dep diff --git a/apps/examples/ftpc/ftpc.h b/apps/examples/ftpc/ftpc.h new file mode 100644 index 000000000..42f1d3fa0 --- /dev/null +++ b/apps/examples/ftpc/ftpc.h @@ -0,0 +1,125 @@ +/**************************************************************************** + * apps/examples/ftpc/ftpc.h + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __APPS_EXAMPLES_FTPC_FTPC_H +#define __APPS_EXAMPLES_FTPC_FTPC_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdio.h> +#include <stdint.h> +#include <stdbool.h> +#include <errno.h> + +#include <apps/ftpc.h> + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Maximum size of one command line */ + +#ifndef CONFIG_FTPC_LINELEN +# define CONFIG_FTPC_LINELEN 80 +#endif + +/* If CONFIG_STDIO_LINEBUFFER is defined, the STDIO buffer will be flushed + * on each new line. Otherwise, STDIO needs to be explicitly flushed to + * see the output in context. + */ + +#if CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NFILE_STREAMS > 0 && \ + CONFIG_STDIO_BUFFER_SIZE > 0 && !defined(CONFIG_STDIO_LINEBUFFER) +# define FFLUSH() fflush(stdout) +#else +# define FFLUSH() +#endif + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +typedef int (*cmd_t)(SESSION handle, int argc, char **argv); + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +extern const char g_ftpcgreeting[]; +extern const char g_ftpcprompt[]; +extern const char g_fmtcmdfailed[]; + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/* Network initialization */ + +extern int ftpc_netinit(void); + +/* Current working directory support */ + +extern char *ftpc_getfullpath(const char *relpath); +extern void ftpc_freefullpath(char *relpath); + +/* FTP command handlers */ + +extern int cmd_login(SESSION handle, int argc, char **argv); +extern int cmd_quit(SESSION handle, int argc, char **argv); +extern int cmd_chdir(SESSION handle, int argc, char **argv); +extern int cmd_rpwd(SESSION handle, int argc, char **argv); +extern int cmd_cdup(SESSION handle, int argc, char **argv); +extern int cmd_mkdir(SESSION handle, int argc, char **argv); + +extern int cmd_rmdir(SESSION handle, int argc, char **argv); +extern int cmd_unlink(SESSION handle, int argc, char **argv); +extern int cmd_chmod(SESSION handle, int argc, char **argv); +extern int cmd_rename(SESSION handle, int argc, char **argv); +extern int cmd_size(SESSION handle, int argc, char **argv); +extern int cmd_time(SESSION handle, int argc, char **argv); +extern int cmd_idle(SESSION handle, int argc, char **argv); +extern int cmd_noop(SESSION handle, int argc, char **argv); +extern int cmd_rhelp(SESSION handle, int argc, char **argv); +extern int cmd_rls(SESSION handle, int argc, char **argv); +extern int cmd_get(SESSION handle, int argc, char **argv); +extern int cmd_put(SESSION handle, int argc, char **argv); + +#endif /* __APPS_EXAMPLES_FTPC_FTPC_H */ diff --git a/apps/examples/ftpc/ftpc_cmds.c b/apps/examples/ftpc/ftpc_cmds.c new file mode 100755 index 000000000..4787da33e --- /dev/null +++ b/apps/examples/ftpc/ftpc_cmds.c @@ -0,0 +1,300 @@ +/****************************************************************************
+ * examples/ftpc/ftpc_cmds.c
+ *
+ * Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <apps/ftpc.h>
+
+#include "ftpc.h"
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: cmd_login
+ ****************************************************************************/
+
+int cmd_login(SESSION handle, int argc, char **argv)
+{
+ struct ftpc_login_s login = {0, 0, 0, true};
+
+ login.uname = argv[1];
+ if (argc > 2)
+ {
+ login.pwd = argv[2];
+ }
+
+ return ftpc_login(handle, &login);
+}
+
+/****************************************************************************
+ * Name: cmd_quit
+ ****************************************************************************/
+
+int cmd_quit(SESSION handle, int argc, char **argv)
+{
+ int ret = ftpc_quit(handle);
+ if (ret < 0)
+ {
+ printf("quit failed: %d\n", errno);
+ }
+ printf("Exitting...\n");
+ exit(0);
+ return ERROR;
+}
+
+/****************************************************************************
+ * Name: cmd_chdir
+ ****************************************************************************/
+
+int cmd_chdir(SESSION handle, int argc, char **argv)
+{
+ return ftpc_chdir(handle, argv[1]);
+}
+
+/****************************************************************************
+ * Name: cmd_rpwd
+ ****************************************************************************/
+
+int cmd_rpwd(SESSION handle, int argc, char **argv)
+{
+ FAR char *pwd = ftpc_pwd(handle);
+ if (pwd)
+ {
+ printf("PWD: %s\n", pwd);
+ free(pwd);
+ return OK;
+ }
+ return ERROR;
+}
+
+/****************************************************************************
+ * Name: cmd_cdup
+ ****************************************************************************/
+
+int cmd_cdup(SESSION handle, int argc, char **argv)
+{
+ return ftpc_cdup(handle);
+}
+
+/****************************************************************************
+ * Name: cmd_mkdir
+ ****************************************************************************/
+
+int cmd_mkdir(SESSION handle, int argc, char **argv)
+{
+ return ftpc_mkdir(handle, argv[1]);
+}
+
+/****************************************************************************
+ * Name: cmd_rmdir
+ ****************************************************************************/
+
+int cmd_rmdir(SESSION handle, int argc, char **argv)
+{
+ return ftpc_rmdir(handle, argv[1]);
+}
+
+/****************************************************************************
+ * Name: cmd_unlink
+ ****************************************************************************/
+
+int cmd_unlink(SESSION handle, int argc, char **argv)
+{
+ return ftpc_unlink(handle, argv[1]);
+}
+
+/****************************************************************************
+ * Name: cmd_chmod
+ ****************************************************************************/
+
+int cmd_chmod(SESSION handle, int argc, char **argv)
+{
+ return ftpc_chmod(handle, argv[1], argv[2]);
+}
+
+/****************************************************************************
+ * Name: cmd_rename
+ ****************************************************************************/
+
+int cmd_rename(SESSION handle, int argc, char **argv)
+{
+ return ftpc_rename(handle, argv[1], argv[2]);
+}
+
+/****************************************************************************
+ * Name: cmd_size
+ ****************************************************************************/
+
+int cmd_size(SESSION handle, int argc, char **argv)
+{
+ uint64_t size = ftpc_filesize(handle, argv[1]);
+ printf("SIZE: %ull\n", size);
+ return OK;
+}
+
+/****************************************************************************
+ * Name: cmd_time
+ ****************************************************************************/
+
+int cmd_time(SESSION handle, int argc, char **argv)
+{
+ time_t filetime = ftpc_filetime(handle, argv[1]);
+ printf("TIME: %ul\n", (long)filetime);
+ return OK;
+}
+
+/****************************************************************************
+ * Name: cmd_idle
+ ****************************************************************************/
+
+int cmd_idle(SESSION handle, int argc, char **argv)
+{
+ unsigned int idletime = 0;
+
+ if (argc > 1)
+ {
+ idletime = atoi(argv[1]);
+ }
+
+ return ftpc_idle(handle, idletime);
+}
+
+/****************************************************************************
+ * Name: cmd_noop
+ ****************************************************************************/
+
+int cmd_noop(SESSION handle, int argc, char **argv)
+{
+ return ftpc_noop(handle);
+}
+
+/****************************************************************************
+ * Name: cmd_rhelp
+ ****************************************************************************/
+
+int cmd_rhelp(SESSION handle, int argc, char **argv)
+{
+ FAR const char *cmd = NULL;
+ int ret;
+
+ if (argc > 1)
+ {
+ cmd = argv[1];
+ }
+
+ ret = ftpc_help(handle, cmd);
+ if (ret == OK)
+ {
+ FAR char *msg = ftpc_response(handle);
+ puts(msg);
+ free(msg);
+ }
+
+ return ret;
+}
+
+/****************************************************************************
+ * Name: cmd_rls
+ ****************************************************************************/
+
+int cmd_rls(SESSION handle, int argc, char **argv)
+{
+ FAR struct ftpc_dirlist_s *dirlist;
+ int i;
+
+ dirlist = ftpc_listdir(handle, argv[1]);
+ if (!dirlist)
+ {
+ return ERROR;
+ }
+
+ printf("%s/\n", argv[1]);
+ for (i = 0; i < dirlist->nnames; i++)
+ {
+ printf(" %s\n", dirlist->name[i]);
+ }
+
+ ftpc_dirfree(dirlist);
+ return OK;
+}
+
+/****************************************************************************
+ * Name: cmd_get
+ ****************************************************************************/
+
+int cmd_get(SESSION handle, int argc, char **argv)
+{
+ FAR const char *lname = argv[1];
+
+ if (argc > 2)
+ {
+ lname = argv[2];
+ }
+ return ftpc_getfile(handle, argv[1], lname, FTPC_GET_NORMAL, FTPC_XFRMODE_ASCII);
+}
+
+/****************************************************************************
+ * Name: cmd_put
+ ****************************************************************************/
+
+int cmd_put(SESSION handle, int argc, char **argv)
+{
+ FAR const char *rname = argv[1];
+
+ if (argc > 2)
+ {
+ rname = argv[2];
+ }
+ return ftp_putfile(handle, argv[1], rname, FTPC_PUT_NORMAL, FTPC_XFRMODE_ASCII);
+}
diff --git a/apps/examples/ftpc/ftpc_main.c b/apps/examples/ftpc/ftpc_main.c new file mode 100755 index 000000000..e80b80a0c --- /dev/null +++ b/apps/examples/ftpc/ftpc_main.c @@ -0,0 +1,410 @@ +/****************************************************************************
+ * examples/ftpc/ftpc_main.c
+ *
+ * Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <arpa/inet.h>
+#include <apps/ftpc.h>
+
+#include "ftpc.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define FTPC_MAX_ARGUMENTS 3
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+struct cmdmap_s
+{
+ const char *cmd; /* Name of the command */
+ cmd_t handler; /* Function that handles the command */
+ uint8_t minargs; /* Minimum number of arguments (including command) */
+ uint8_t maxargs; /* Maximum number of arguments (including command) */
+ const char *usage; /* Usage instructions for 'help' command */
+};
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static const char g_delim[] = " \t\n";
+
+static int cmd_help(SESSION handle, int argc, char **argv);
+static int cmd_unrecognized(SESSION handle, int argc, char **argv);
+
+static const struct cmdmap_s g_cmdmap[] =
+{
+ { "cd", cmd_chdir, 2, 2, "<directory>" },
+ { "chmod", cmd_chmod, 3, 3, "<permissions> <path>" },
+ { "get", cmd_unlink, 2, 3, "<rname> [<lname>]" },
+ { "help", cmd_help, 1, 2, "" },
+ { "idle", cmd_idle, 1, 2, "[<idletime>]" },
+ { "login", cmd_login, 2, 3, "<uname> [<password>]" },
+ { "ls", cmd_login, 1, 2, "[<dirpath>]" },
+ { "quit", cmd_login, 1, 1, "" },
+ { "mkdir", cmd_mkdir, 2, 2, "<directory>" },
+ { "noop", cmd_noop, 1, 1, "" },
+ { "put", cmd_unlink, 2, 3, "<lname> [<rname>]" },
+ { "pwd", cmd_rpwd, 1, 1, "" },
+ { "rename", cmd_rename, 3, 3, "<oldname> <newname>" },
+ { "rhelp", cmd_rhelp, 1, 2, "[<command>]" },
+ { "rm", cmd_unlink, 2, 2, "" },
+ { "rmdir", cmd_rmdir, 2, 2, "<directory>" },
+ { "size", cmd_size, 2, 2, "<filepath>" },
+ { "time", cmd_time, 2, 2, "<filepath>" },
+ { "up", cmd_cdup, 1, 1, "" },
+};
+
+static char g_line[CONFIG_FTPC_LINELEN];
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: cmd_help
+ ****************************************************************************/
+
+static int cmd_help(SESSION handle, int argc, char **argv)
+{
+ const struct cmdmap_s *ptr;
+
+ printf("Local FTPC commands:\n");
+ for (ptr = g_cmdmap; ptr->cmd; ptr++)
+ {
+ if (ptr->usage)
+ {
+ printf(" %s %s\n", ptr->cmd, ptr->usage);
+ }
+ else
+ {
+ printf(" %s\n", ptr->cmd);
+ }
+ }
+ return OK;
+}
+
+/****************************************************************************
+ * Name: cmd_unrecognized
+ ****************************************************************************/
+
+static int cmd_unrecognized(SESSION handle, int argc, char **argv)
+{
+ printf("Command %s unrecognized\n", argv[0]);
+ return ERROR;
+}
+
+/****************************************************************************
+ * Name: ftpc_argument
+ ****************************************************************************/
+
+char *ftpc_argument(char **saveptr)
+{
+ char *pbegin = *saveptr;
+ char *pend = NULL;
+ const char *term;
+
+ /* Find the beginning of the next token */
+
+ for (;
+ *pbegin && strchr(g_delim, *pbegin) != NULL;
+ pbegin++);
+
+ /* If we are at the end of the string with nothing
+ * but delimiters found, then return NULL.
+ */
+
+ if (!*pbegin)
+ {
+ return NULL;
+ }
+
+ /* Does the token begin with '#' -- comment */
+
+ else if (*pbegin == '#')
+ {
+ /* Return NULL meaning that we are at the end of the line */
+
+ *saveptr = pbegin;
+ pbegin = NULL;
+ }
+ else
+ {
+ /* Otherwise, we are going to have to parse to find the end of
+ * the token. Does the token begin with '"'?
+ */
+
+ if (*pbegin == '"')
+ {
+ /* Yes.. then only another '"' can terminate the string */
+
+ pbegin++;
+ term = "\"";
+ }
+ else
+ {
+ /* No, then any of the usual terminators will terminate the argument */
+
+ term = g_delim;
+ }
+
+ /* Find the end of the string */
+
+ for (pend = pbegin + 1;
+ *pend && strchr(term, *pend) == NULL;
+ pend++);
+
+ /* pend either points to the end of the string or to
+ * the first delimiter after the string.
+ */
+
+ if (*pend)
+ {
+ /* Turn the delimiter into a null terminator */
+
+ *pend++ = '\0';
+ }
+
+ /* Save the pointer where we left off */
+
+ *saveptr = pend;
+
+ }
+
+ /* Return the beginning of the token. */
+
+ return pbegin;
+}
+
+/****************************************************************************
+ * Name: ftpc_execute
+ ****************************************************************************/
+
+static int ftpc_execute(SESSION handle, int argc, char *argv[])
+{
+ const struct cmdmap_s *cmdmap;
+ const char *cmd;
+ cmd_t handler = cmd_unrecognized;
+ int ret;
+
+ /* The form of argv is:
+ *
+ * argv[0]: The command name. This is argv[0] when the arguments
+ * are, finally, received by the command handler
+ * argv[1]: The beginning of argument (up to FTPC_MAX_ARGUMENTS)
+ * argv[argc]: NULL terminating pointer
+ */
+
+ cmd = argv[0];
+
+ /* See if the command is one that we understand */
+
+ for (cmdmap = g_cmdmap; cmdmap->cmd; cmdmap++)
+ {
+ if (strcmp(cmdmap->cmd, cmd) == 0)
+ {
+ /* Check if a valid number of arguments was provided. We
+ * do this simple, imperfect checking here so that it does
+ * not have to be performed in each command.
+ */
+
+ if (argc < cmdmap->minargs)
+ {
+ /* Fewer than the minimum number were provided */
+
+ printf("Too few arguments for '%s'\n", cmd);
+ return ERROR;
+ }
+ else if (argc > cmdmap->maxargs)
+ {
+ /* More than the maximum number were provided */
+
+ printf("Too many arguments for '%s'\n", cmd);
+ return ERROR;
+ }
+ else
+ {
+ /* A valid number of arguments were provided (this does
+ * not mean they are right).
+ */
+
+ handler = cmdmap->handler;
+ break;
+ }
+ }
+ }
+
+ ret = handler(handle, argc, argv);
+ if (ret < 0)
+ {
+ printf("%s failed: %d\n", cmd, errno);
+ }
+ return ret;
+}
+
+/****************************************************************************
+ * Name: ftpc_parse
+ ****************************************************************************/
+
+int ftpc_parse(SESSION handle, char *cmdline)
+{
+ FAR char *argv[FTPC_MAX_ARGUMENTS];
+ FAR char *saveptr;
+ FAR char *cmd;
+ int argc;
+ int ret;
+
+ /* Initialize parser state */
+
+ memset(argv, 0, FTPC_MAX_ARGUMENTS*sizeof(FAR char *));
+
+ /* Parse out the command at the beginning of the line */
+
+ saveptr = cmdline;
+ cmd = ftpc_argument(&saveptr);
+
+ /* Check if any command was provided -OR- if command processing is
+ * currently disabled.
+ */
+
+ if (!cmd)
+ {
+ /* An empty line is not an error */
+
+ return OK;
+ }
+
+ /* Parse all of the arguments following the command name. */
+
+ argv[0] = cmd;
+ for (argc = 1; argc < FTPC_MAX_ARGUMENTS; argc++)
+ {
+ argv[argc] = ftpc_argument(&saveptr);
+ if (!argv[argc])
+ {
+ break;
+ }
+ }
+ argv[argc] = NULL;
+
+ /* Check if the maximum number of arguments was exceeded */
+
+ if (argc > FTPC_MAX_ARGUMENTS)
+ {
+ printf("Too many arguments\n");
+ ret = -EINVAL;
+ }
+ else
+ {
+ /* Then execute the command */
+
+ ret = ftpc_execute(handle, argc, argv);
+ }
+
+ return ret;
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+int ftpc_main(int argc, char **argv, char **envp)
+{
+ struct ftpc_connect_s connect = {{0}, 0};
+ SESSION handle;
+ FAR char *ptr;
+
+ if (argc != 2)
+ {
+ printf("Usage:\n");
+ printf(" %s xx.xx.xx.xx[:pp]\n", argv[0]);
+ printf("Where\n");
+ printf(" xx.xx.xx.xx is the IP address of the FTP server\n");
+ printf(" pp is option port to use with the FTP server\n");
+ exit(1);
+ }
+
+ ptr = strchr(argv[1], ':');
+ if (ptr)
+ {
+ *ptr = '\0';
+ connect.port = atoi(ptr+1);
+ }
+ connect.addr.s_addr = inet_addr(argv[1]);
+
+ handle = ftpc_connect(&connect);
+ if (!handle)
+ {
+ printf("Failed to connect to the server: %d\n", errno);
+ exit(1);
+ }
+
+ /* Present a greeting */
+
+ printf("FTPC:\n");
+ FFLUSH();
+
+ /* Then enter the command line parsing loop */
+
+ for (;;)
+ {
+ /* Display the prompt string */
+
+ fputs("FTPC>", stdout);
+ FFLUSH();
+
+ /* Get the next line of input */
+
+ if (fgets(g_line, CONFIG_FTPC_LINELEN, stdin))
+ {
+ /* Parse process the command */
+
+ (void)ftpc_parse(handle, g_line);
+ FFLUSH();
+ }
+ }
+
+ return 0;
+}
\ No newline at end of file diff --git a/apps/include/ftpc.h b/apps/include/ftpc.h index 77122ddae..211edbad4 100644 --- a/apps/include/ftpc.h +++ b/apps/include/ftpc.h @@ -43,7 +43,9 @@ #include <nuttx/config.h> #include <stdbool.h> +#include <signal.h> #include <time.h> + #include <netinet/in.h> /**************************************************************************** @@ -79,6 +81,10 @@ # define CONFIG_FTP_MAXPATH 256 #endif +#ifndef CONFIG_FTP_SIGNAL +# define CONFIG_FTP_SIGNAL SIGUSR1 +#endif + /* Interface arguments ******************************************************/ /* These definitions describe how a put operation should be performed */ @@ -185,7 +191,7 @@ EXTERN int ftpc_idle(SESSION handle, unsigned int idletime); EXTERN int ftpc_noop(SESSION handle); EXTERN int ftpc_help(SESSION handle, FAR const char *arg); -/* Director listings ********************************************************/ +/* Directory listings *******************************************************/ EXTERN FAR struct ftpc_dirlist_s *ftpc_listdir(SESSION handle, FAR const char *dirpath); diff --git a/apps/netutils/README.txt b/apps/netutils/README.txt index e4b05eb21..2059b569e 100644 --- a/apps/netutils/README.txt +++ b/apps/netutils/README.txt @@ -21,6 +21,7 @@ highly influenced by uIP) include: dhcpd - Dynamic Host Configuration Protocol (DHCP) server tftpc - TFTP client + ftpc - FTP client thttpd - This is a port of Jef Poskanzer's THTTPD HTPPD server. See http://acme.com/software/thttpd/. diff --git a/apps/netutils/ftpc/ftpc_connect.c b/apps/netutils/ftpc/ftpc_connect.c index 94add3d54..b0a5919df 100644 --- a/apps/netutils/ftpc/ftpc_connect.c +++ b/apps/netutils/ftpc/ftpc_connect.c @@ -40,6 +40,7 @@ #include <nuttx/config.h> #include <stdlib.h> +#include <unistd.h> #include <errno.h> #include <debug.h> @@ -98,6 +99,7 @@ SESSION ftpc_connect(FAR struct ftpc_connect_s *server) session->addr.s_addr = server->addr.s_addr; session->port = server->port; + session->pid = getpid(); /* Create up a timer to prevent hangs */ @@ -143,7 +145,7 @@ int ftpc_reconnect(FAR struct ftpc_session_s *session) /* Set up a timer to prevent hangs */ - ret = wd_start(session->wdog, session->conntimeo, ftpc_conntimeo, 1, session); + ret = wd_start(session->wdog, session->conntimeo, ftpc_timeout, 1, session); if (ret != OK) { ndbg("wd_start() failed\n"); diff --git a/apps/netutils/ftpc/ftpc_getfile.c b/apps/netutils/ftpc/ftpc_getfile.c index a3ea5008d..095bf2414 100644 --- a/apps/netutils/ftpc/ftpc_getfile.c +++ b/apps/netutils/ftpc/ftpc_getfile.c @@ -188,8 +188,8 @@ static int ftpc_recvbinary(FAR struct ftpc_session_s *session, err = ENOMEM; goto errout_with_err; } - - while (!feof(rinstream)) + + for (;;) { if (ftpc_waitinput(session) != 0) { @@ -201,8 +201,13 @@ static int ftpc_recvbinary(FAR struct ftpc_session_s *session, nread = fread(buf, sizeof(char), CONFIG_FTP_BUFSIZE, rinstream); if (nread <= 0) { - (void)ftpc_xfrabort(session, rinstream); - ret = ERROR; + /* nread == 0 means end of file */ + + if (nread < 0) + { + (void)ftpc_xfrabort(session, rinstream); + ret = ERROR; + } break; } diff --git a/apps/netutils/ftpc/ftpc_getreply.c b/apps/netutils/ftpc/ftpc_getreply.c index 86f1c7bfa..89dab6e81 100644 --- a/apps/netutils/ftpc/ftpc_getreply.c +++ b/apps/netutils/ftpc/ftpc_getreply.c @@ -189,7 +189,7 @@ int fptc_getreply(struct ftpc_session_s *session) if (session->replytimeo) { - ret = wd_start(session->wdog, session->replytimeo, ftpc_replytimeo, 1, session); + ret = wd_start(session->wdog, session->replytimeo, ftpc_timeout, 1, session); } /* Get the next line from the server */ diff --git a/apps/netutils/ftpc/ftpc_internal.h b/apps/netutils/ftpc/ftpc_internal.h index 244a7cfcc..3efac6184 100644 --- a/apps/netutils/ftpc/ftpc_internal.h +++ b/apps/netutils/ftpc/ftpc_internal.h @@ -160,6 +160,7 @@ struct ftpc_session_s FAR char *prevdir; /* Previous directory */ FAR char *rname; /* Remote file name */ FAR char *lname; /* Local file name */ + pid_t pid; /* Task ID of FTP client */ uint8_t xfrmode; /* Previous data transfer type (See FTPC_XFRMODE_* defines) */ uint16_t port; /* Server/proxy port number (probably 21) */ uint16_t flags; /* Connection flags (see FTPC_FLAGS_* defines) */ @@ -238,11 +239,7 @@ EXTERN void ftpc_sockcopy(FAR struct ftpc_socket_s *dest, /* Socket I/O helpers */ EXTERN int ftpc_sockprintf(FAR struct ftpc_socket_s *sock, const char *str, ...); - -/* Timeout handlers */ - -EXTERN void ftpc_replytimeo(int argc, uint32_t arg1, ...); -EXTERN void ftpc_conntimeo(int argc, uint32_t arg1, ...); +EXTERN void ftpc_timeout(int argc, uint32_t arg1, ...); /* Transfer helpers */ diff --git a/apps/netutils/ftpc/ftpc_listdir.c b/apps/netutils/ftpc/ftpc_listdir.c index 6ec70a0d9..09fad57ff 100644 --- a/apps/netutils/ftpc/ftpc_listdir.c +++ b/apps/netutils/ftpc/ftpc_listdir.c @@ -198,7 +198,7 @@ static void ftpc_nlstparse(FAR FILE *instream, callback_t callback, /* Read every filename from the temporary file */ - while (!feof(instream)) + for (;;) { /* Read the next line from the file */ diff --git a/apps/netutils/ftpc/ftpc_putfile.c b/apps/netutils/ftpc/ftpc_putfile.c index c05112402..6993169d9 100644 --- a/apps/netutils/ftpc/ftpc_putfile.c +++ b/apps/netutils/ftpc/ftpc_putfile.c @@ -111,32 +111,37 @@ static int ftpc_sendbinary(FAR struct ftpc_session_s *session, int ret = OK; buf = (char *)malloc(CONFIG_FTP_BUFSIZE); - while (!feof(linstream)) + for (;;) { nread = fread(buf, sizeof(char), CONFIG_FTP_BUFSIZE, linstream); - if (nread <= 0) - { - (void)ftpc_xfrabort(session, linstream); - ret = ERROR; - break; - } - - if (ftpc_waitoutput(session) != 0) - { - ret = ERROR; - break; - } - - nwritten = fwrite(buf, sizeof(char), nread, routstream); - if (nwritten != nread) - { - (void)ftpc_xfrabort(session, routstream); - ret = ERROR; - break; - } - - session->size += nread; - } + if (nread <= 0) + { + /* nread == 0 is just EOF */ + + if (nread < 0) + { + (void)ftpc_xfrabort(session, linstream); + ret = ERROR; + } + break; + } + + if (ftpc_waitoutput(session) != 0) + { + ret = ERROR; + break; + } + + nwritten = fwrite(buf, sizeof(char), nread, routstream); + if (nwritten != nread) + { + (void)ftpc_xfrabort(session, routstream); + ret = ERROR; + break; + } + + session->size += nread; + } free(buf); return ret; diff --git a/apps/netutils/ftpc/ftpc_transfer.c b/apps/netutils/ftpc/ftpc_transfer.c index bce30e302..640e92276 100644 --- a/apps/netutils/ftpc/ftpc_transfer.c +++ b/apps/netutils/ftpc/ftpc_transfer.c @@ -44,11 +44,14 @@ #include <unistd.h> #include <string.h> #include <poll.h> +#include <signal.h> #include <ctype.h> #include <errno.h> #include <assert.h> #include <debug.h> +#include <apps/ftpc.h> + #include "ftpc_internal.h" /**************************************************************************** @@ -396,5 +399,23 @@ int ftpc_waitdata(FAR struct ftpc_session_s *session, FAR FILE *stream, bool rdw return ret; } +/**************************************************************************** + * Name: ftpc_timeout + * + * Description: + * A timeout occurred -- either on a specific command or while waiting + * for a reply. + * + * NOTE: + * This function executes in the context of a timer interrupt handler. + * + ****************************************************************************/ +void ftpc_timeout(int argc, uint32_t arg1, ...) +{ + FAR struct ftpc_session_s *session = (FAR struct ftpc_session_s *)arg1; + nlldbg("Timeout!\n"); + DEBUGASSERT(argc == 1 && session); + kill(session->pid, CONFIG_FTP_SIGNAL); +} diff --git a/apps/nshlib/nsh.h b/apps/nshlib/nsh.h index 91b949cb7..fb3b35120 100644 --- a/apps/nshlib/nsh.h +++ b/apps/nshlib/nsh.h @@ -33,8 +33,8 @@ * ****************************************************************************/ -#ifndef __NSH_H -#define __HSH_H +#ifndef __APPS_NSHLIB_NSH_H +#define __APPS_NSHLIB_NSH_H /**************************************************************************** * Included Files @@ -488,4 +488,4 @@ extern int cmd_lbracket(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv); # endif #endif /* CONFIG_DISABLE_SIGNALS */ -#endif /* __NSH_H */ +#endif /* __APPS_NSHLIB_NSH_H */ diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 6286b667c..122ab4148 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -1792,4 +1792,5 @@ * net/getsockname.c: Added standard getsockname() to return the local address associated with a socket. * lib/stdio/lib_asprintf.c: Add asprintf() - + * configs/olimex-lpc1766stk/ftpc: Add a configuration to support + testing of the FTP client shell. diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 84548e10d..456fc81e9 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -8,7 +8,7 @@ <tr align="center" bgcolor="#e4e4e4"> <td> <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1> - <p>Last Updated: May 28, 2011</p> + <p>Last Updated: June 1, 2011</p> </td> </tr> </table> @@ -2331,12 +2331,21 @@ nuttx-6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> less than or equal to 64Kb. In this case, CONFIG_MM_SMALL can be defined so that those MCUs will also benefit from the smaller, 16- bit-based allocation overhead. + * lib/string/lib_strndup.c: Add standard strndup() library function. + * net/getsockname.c: Added standard getsockname() to return the local + address associated with a socket. + * lib/stdio/lib_asprintf.c: Add asprintf() + * configs/olimex-lpc1766stk/ftpc: Add a configuration to support + testing of the FTP client shell. apps-6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> * nshlib/nsh_netcmds.c: If a network device name and IP address are provided with the ifconfig command, then this command will now set the network address. (Contributed by Yu Qiang). + * netutils/ftpc: A library to support client-side FTP. + * examples/ftpc: A simple add-on to the NSH. From NSH, you can start + this simple FTP shell to transfer files to/from a remote FTP server. pascal-3.1 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index b85d2a87a..417f64619 100755 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -781,6 +781,19 @@ sudirectory and can be selected as follow: Where <subdir> is one of the following:
+ ftpc:
+ This is a simple FTP client shell used to exercise the capabilities
+ of the FTPC library (apps/netutils/ftpc). This example is configured
+ to that it will only work as a "built-in" program that can be run from
+ NSH when CONFIG_NSH_BUILTIN_APPS is defined.
+
+ From NSH, the startup command line is then:
+
+ ftpc xx.xx.xx.xx[:pp]
+
+ where xx.xx.xx.xx is the IP address of the FTP server and pp is an
+ optional port number.
+
hidkbd:
This configuration directory, performs a simple test of the USB host
HID keyboard class driver using the test logic in apps/examples/hidkbd.
@@ -853,7 +866,7 @@ Where <subdir> is one of the following: hardware flow control is partially implemented but does not behave as
expected. It needs a little more work.
- thttpd:
+ thttpd:
This builds the THTTPD web server example using the THTTPD and
the apps/examples/thttpd application.
diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs new file mode 100755 index 000000000..b1d7396aa --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs @@ -0,0 +1,165 @@ +############################################################################ +# configs/olimex-lpc1766stk/ftpc/Make.defs +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config + +# Setup for the selected toolchain + +ifeq ($(CONFIG_LPC17_CODESOURCERYW),y) + # CodeSourcery under Windows + CROSSDEV = arm-none-eabi- + WINTOOL = y + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft +endif +ifeq ($(CONFIG_LPC17_CODESOURCERYL),y) + # CodeSourcery under Linux + CROSSDEV = arm-none-eabi- + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft + MAXOPTIMIZATION = -O2 +endif +ifeq ($(CONFIG_LPC17_DEVKITARM),y) + # devkitARM under Windows + CROSSDEV = arm-eabi- + WINTOOL = y + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft +endif +ifeq ($(CONFIG_LPC17_BUILDROOT),y) + # NuttX buildroot under Linux or Cygwin + CROSSDEV = arm-elf- + ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft + MAXOPTIMIZATION = -Os +endif + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/winlink.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ftpc/ld.script}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ftpc/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +MKNXFLAT = mknxflat +LDNXFLAT = ldnxflat + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +define PREPROCESS + @echo "CPP: $1->$2" + @$(CPP) $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + @echo "CC: $1" + @$(CC) -c $(CFLAGS) $1 -o $2 +endef + +define COMPILEXX + @echo "CXX: $1" + @$(CXX) -c $(CXXFLAGS) $1 -o $2 +endef + +define ASSEMBLE + @echo "AS: $1" + @$(CC) -c $(AFLAGS) $1 -o $2 +endef + +define ARCHIVE + echo "AR: $2"; \ + $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } +endef + +define CLEAN + @rm -f *.o *.a +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/appconfig b/nuttx/configs/olimex-lpc1766stk/ftpc/appconfig new file mode 100644 index 000000000..e4dca4137 --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/appconfig @@ -0,0 +1,51 @@ +############################################################################ +# configs/olimex-lpc1766stk/ftpc/appconfig +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# Path to example in apps/examples containing the user_start entry point + +CONFIGURED_APPS += examples/nsh + +# Built-in applications + +CONFIGURED_APPS += examples/ftpc + +# NSH and FTPC libraries + +CONFIGURED_APPS += nshlib +CONFIGURED_APPS += netutils/ftpc + +# Optional networking support + +CONFIGURED_APPS += netutils/uiplib diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig new file mode 100755 index 000000000..80e6ef504 --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig @@ -0,0 +1,952 @@ +############################################################################ +# configs/olimex-lpc1766stk/ftpc/defconfig +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip familyl. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_DRAM_END - Last address+1 of installed RAM +# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization +# +CONFIG_ARCH=arm +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_CHIP=lpc17xx +CONFIG_ARCH_CHIP_LPC1766=y +CONFIG_ARCH_BOARD=olimex-lpc1766stk +CONFIG_ARCH_BOARD_LPC1766STK=y +CONFIG_BOARD_LOOPSPERMSEC=8111 +CONFIG_DRAM_SIZE=(32*1024) +CONFIG_DRAM_START=0x10000000 +CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=n + +# +# Identify toolchain and linker options +# +CONFIG_LPC17_CODESOURCERYW=n +CONFIG_LPC17_CODESOURCERYL=n +CONFIG_LPC17_DEVKITARM=n +CONFIG_LPC17_BUILDROOT=y + +# +# Individual subsystems can be enabled: +# +# Individual subsystems can be enabled: +# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) +# +CONFIG_LPC17_ETHERNET=y +CONFIG_LPC17_USBHOST=n +CONFIG_LPC17_USBOTG=n +CONFIG_LPC17_USBDEV=n +CONFIG_LPC17_UART0=y +CONFIG_LPC17_UART1=n +CONFIG_LPC17_UART2=n +CONFIG_LPC17_UART3=n +CONFIG_LPC17_CAN1=n +CONFIG_LPC17_CAN2=n +CONFIG_LPC17_SPI=n +CONFIG_LPC17_SSP0=n +CONFIG_LPC17_SSP1=n +CONFIG_LPC17_I2C0=n +CONFIG_LPC17_I2C1=n +CONFIG_LPC17_I2S=n +CONFIG_LPC17_TMR0=n +CONFIG_LPC17_TMR1=n +CONFIG_LPC17_TMR2=n +CONFIG_LPC17_TMR3=n +CONFIG_LPC17_RIT=n +CONFIG_LPC17_PWM=n +CONFIG_LPC17_MCPWM=n +CONFIG_LPC17_QEI=n +CONFIG_LPC17_RTC=n +CONFIG_LPC17_WDT=n +CONFIG_LPC17_ADC=n +CONFIG_LPC17_DAC=n +CONFIG_LPC17_GPDMA=n + +# +# LPC17xx specific serial device driver settings +# +# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the +# console and ttys0 (default is the UART1). +# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_UARTn_2STOP - Two stop bits +# +CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_UART1_SERIAL_CONSOLE=n +CONFIG_UART2_SERIAL_CONSOLE=n +CONFIG_UART3_SERIAL_CONSOLE=n + +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART2_TXBUFSIZE=256 +CONFIG_UART3_TXBUFSIZE=256 + +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART2_RXBUFSIZE=256 +CONFIG_UART3_RXBUFSIZE=256 + +CONFIG_UART0_BAUD=57600 +CONFIG_UART2_BAUD=57600 +CONFIG_UART3_BAUD=57600 +CONFIG_UART1_BAUD=57600 + +CONFIG_UART0_BITS=8 +CONFIG_UART1_BITS=8 +CONFIG_UART2_BITS=8 +CONFIG_UART3_BITS=8 + +CONFIG_UART0_PARITY=0 +CONFIG_UART1_PARITY=0 +CONFIG_UART2_PARITY=0 +CONFIG_UART3_PARITY=0 + +CONFIG_UART0_2STOP=0 +CONFIG_UART1_2STOP=0 +CONFIG_UART2_2STOP=0 +CONFIG_UART3_2STOP=0 + +# +# LPC17xx specific PHY/Ethernet device driver settings +# +# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY +# CONFIG_PHY_AUTONEG - Enable auto-negotion +# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. +# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex +# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb +# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 +# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 +# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is +# the higest priority. +# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). +# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs +# CONFIG_DEBUG. +# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. +# Also needs CONFIG_DEBUG. +# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. +# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. +# Automatically set if CONFIG_NET_IGMP is selected. +# +CONFIG_PHY_KS8721=y +CONFIG_PHY_AUTONEG=y +CONFIG_PHY_SPEED100=n +CONFIG_PHY_FDUPLEX=y +CONFIG_NET_REGDEBUG=n + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=y +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=n +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=n +CONFIG_DEBUG_NET=n +CONFIG_MM_REGIONS=2 +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=0 +CONFIG_START_YEAR=2010 +CONFIG_START_MONTH=11 +CONFIG_START_DAY=23 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=y +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=n +CONFIG_FDCLONE_STDIO=n +CONFIG_SDCLONE_DISABLE=n +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=(50*1000) +CONFIG_SCHED_WORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=4 + +# +# Settings for nxflat +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). +# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals +# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and +# CONFIG_DEBUG_BINFMT have to be defined or +# CONFIG_NXFLAT_DUMPBUFFER does nothing. +# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table +# is ordered by symbol name +# +CONFIG_NXFLAT=y +CONFIG_NXFLAT_DUMPBUFFER=n +CONFIG_SYMTAB_ORDEREDBYNAME=y + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=y +CONFIG_DISABLE_SIGNALS=n +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=n +CONFIG_DISABLE_ENVIRON=n +CONFIG_DISABLE_POLL=n + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=0 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_NUNGET_CHARS=0 +CONFIG_PREALLOC_MQ_MSGS=0 +CONFIG_MQ_MAXMSGSIZE=0 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=8 +CONFIG_PREALLOC_TIMERS=8 + +# +# Filesystem configuration +# +# CONFIG_FS_FAT - Enable FAT filesystem support +# CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# +CONFIG_FS_FAT=n +CONFIG_FS_ROMFS=y + +# +# SPI-based MMC/SD driver +# +# CONFIG_MMCSD_NSLOTS +# Number of MMC/SD slots supported by the driver +# CONFIG_MMCSD_READONLY +# Provide read-only access (default is read/write) +# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. +# Default is 20MHz. +# +CONFIG_MMCSD_NSLOTS=1 +CONFIG_MMCSD_READONLY=n +CONFIG_MMCSD_SPICLOCK=12500000 + +# +# Block driver buffering +# +# CONFIG_FS_READAHEAD +# Enable read-ahead buffering +# CONFIG_FS_WRITEBUFFER +# Enable write buffering +# +CONFIG_FS_READAHEAD=n +CONFIG_FS_WRITEBUFFER=n + +# +# SDIO-based MMC/SD driver +# +# CONFIG_SDIO_DMA +# SDIO driver supports DMA +# CONFIG_MMCSD_MMCSUPPORT +# Enable support for MMC cards +# CONFIG_MMCSD_HAVECARDDETECT +# SDIO driver card detection is 100% accurate +# +CONFIG_SDIO_DMA=n +CONFIG_MMCSD_MMCSUPPORT=n +CONFIG_MMCSD_HAVECARDDETECT=n + +# +# TCP/IP and UDP support via uIP +# CONFIG_NET - Enable or disable all network features +# CONFIG_NET_IPv6 - Build in support for IPv6 +# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. +# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options +# CONFIG_NET_BUFSIZE - uIP buffer size +# CONFIG_NET_TCP - TCP support on or off +# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) +# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers +# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) +# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until +# accept() is called. The size of the backlog is selected when listen() is called. +# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) +# CONFIG_NET_UDP - UDP support on or off +# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off +# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections +# CONFIG_NET_ICMP - ICMP ping response support on or off +# CONFIG_NET_ICMP_PING - ICMP ping request support on or off +# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address +# CONFIG_NET_STATISTICS - uIP statistics on or off +# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window +# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table +# CONFIG_NET_BROADCAST - Broadcast support +# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates +# +CONFIG_NET=y +CONFIG_NET_IPv6=n +CONFIG_NSOCKET_DESCRIPTORS=16 +CONFIG_NET_SOCKOPTS=y +CONFIG_NET_BUFSIZE=420 +CONFIG_NET_TCP=y +CONFIG_NET_TCP_CONNS=16 +CONFIG_NET_NTCP_READAHEAD_BUFFERS=8 +CONFIG_NET_TCPBACKLOG=y +CONFIG_NET_MAX_LISTENPORTS=8 +CONFIG_NET_UDP=n +CONFIG_NET_UDP_CHECKSUMS=y +#CONFIG_NET_UDP_CONNS=10 +CONFIG_NET_ICMP=y +CONFIG_NET_ICMP_PING=n +#CONFIG_NET_PINGADDRCONF=0 +CONFIG_NET_STATISTICS=n +#CONFIG_NET_RECEIVE_WINDOW= +#CONFIG_NET_ARPTAB_SIZE=8 +CONFIG_NET_BROADCAST=n +#CONFIG_NET_FWCACHE_SIZE=2 + +# +# UIP Network Utilities +# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP +# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries +# +CONFIG_NET_DHCP_LIGHT=n +CONFIG_NET_RESOLV_ENTRIES=4 + +# +# USB Device Configuration +# +# CONFIG_USBDEV +# Enables USB device support +# CONFIG_USBDEV_ISOCHRONOUS +# Build in extra support for isochronous endpoints +# CONFIG_USBDEV_DUALSPEED +# Hardware handles high and full speed operation (USB 2.0) +# CONFIG_USBDEV_SELFPOWERED +# Will cause USB features to indicate that the device is +# self-powered +# CONFIG_USBDEV_MAXPOWER +# Maximum power consumption in mA +# CONFIG_USBDEV_TRACE +# Enables USB tracing for debug +# CONFIG_USBDEV_TRACE_NRECORDS +# Number of trace entries to remember +# +CONFIG_USBDEV=n +CONFIG_USBDEV_ISOCHRONOUS=n +CONFIG_USBDEV_DUALSPEED=n +CONFIG_USBDEV_SELFPOWERED=y +CONFIG_USBDEV_REMOTEWAKEUP=n +CONFIG_USBDEV_MAXPOWER=100 +CONFIG_USBDEV_TRACE=n +CONFIG_USBDEV_TRACE_NRECORDS=128 + +# +# LPC17xx USB Configuration +# +# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT +# Handle USB Start-Of-Frame events. +# Enable reading SOF from interrupt handler vs. simply reading on demand. +# Probably a bad idea... Unless there is some issue with sampling the SOF +# from hardware asynchronously. +# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT +# Enable high priority interrupts. I have no idea why you might want to +# do that +# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS +# Number of DMA descriptors to allocate in SRAM. +# CONFIG_LPC17_USBDEV_DMA +# Enable lpc17xx-specific DMA support +# +CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n +CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n +CONFIG_LPC17_USBDEV_DMA=n +CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 +CONFIG_LPC17_USBDEV_DMAINTMASK=0 + +# +# USB Serial Device Configuration +# +# CONFIG_USBSER +# Enable compilation of the USB serial driver +# CONFIG_USBSER_EPINTIN +# The logical 7-bit address of a hardware endpoint that supports +# interrupt IN operation +# CONFIG_USBSER_EPBULKOUT +# The logical 7-bit address of a hardware endpoint that supports +# bulk OUT operation +# CONFIG_USBSER_EPBULKIN +# The logical 7-bit address of a hardware endpoint that supports +# bulk IN operation +# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR +# The vendor ID code/string +# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR +# The product ID code/string +# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE +# Size of the serial receive/transmit buffers +# +CONFIG_USBSER=n +CONFIG_USBSER_EPINTIN=1 +CONFIG_USBSER_EPBULKOUT=2 +CONFIG_USBSER_EPBULKIN=5 +CONFIG_USBSER_NWRREQS=4 +CONFIG_USBSER_NRDREQS=4 +CONFIG_USBSER_VENDORID=0x067b +CONFIG_USBSER_PRODUCTID=0x2303 +CONFIG_USBSER_VENDORSTR="Nuttx" +CONFIG_USBSER_PRODUCTSTR="USBdev Serial" +CONFIG_USBSER_RXBUFSIZE=512 +CONFIG_USBSER_TXBUFSIZE=512 + +# +# USB Storage Device Configuration +# +# CONFIG_USBSTRG +# Enable compilation of the USB storage driver +# CONFIG_USBSTRG_EP0MAXPACKET +# Max packet size for endpoint 0 +# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN +# The logical 7-bit address of a hardware endpoints that support +# bulk OUT and IN operations +# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN +# The size of the buffer in each write/read request. This +# value needs to be at least as large as the endpoint +# maxpacket and ideally as large as a block device sector. +# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR +# The vendor ID code/string +# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR +# The product ID code/string +# CONFIG_USBSTRG_REMOVABLE +# Select if the media is removable +# +CONFIG_USBSTRG=n +CONFIG_USBSTRG_EP0MAXPACKET=64 +CONFIG_USBSTRG_EPBULKOUT=2 +CONFIG_USBSTRG_EPBULKIN=5 +CONFIG_USBSTRG_NRDREQS=2 +CONFIG_USBSTRG_NWRREQS=2 +CONFIG_USBSTRG_BULKINREQLEN=256 +CONFIG_USBSTRG_BULKOUTREQLEN=256 +CONFIG_USBSTRG_VENDORID=0x584e +CONFIG_USBSTRG_VENDORSTR="NuttX" +CONFIG_USBSTRG_PRODUCTID=0x5342 +CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" +CONFIG_USBSTRG_VERSIONNO=0x0399 +CONFIG_USBSTRG_REMOVABLE=y + +# +# THTTPD settings +# +# CONFIG_THTTPD_PORT - THTTPD Server port number +# CONFIG_THTTPD_IPADDR - Server IP address (no host name) +# CONFIG_THTTPD_SERVER_ADDRESS - SERVER_ADDRESS: response +# CONFIG_THTTPD_SERVER_SOFTWARE - SERVER_SOFTWARE: response +# CONFIG_THTTPD_PATH - Server working directory +# CONFIG_THTTPD_CGI_PATH - Path to CGI executables +# CONFIG_THTTPD_CGI_PATTERN - Only CGI programs matching this +# pattern will be executed. In fact, if this value is not defined +# then no CGI logic will be built. +# CONFIG_THTTPD_CGI_PRIORITY - Provides the priority of CGI child tasks +# CONFIG_THTTPD_CGI_STACKSIZE - Provides the initial stack size of +# CGI child task (will be overridden by the stack size in the NXFLAT +# header) +# CONFIG_THTTPD_CGI_BYTECOUNT - Byte output limit for CGI tasks. +# CONFIG_THTTPD_CGI_TIMELIMIT - How many seconds to allow CGI programs +# to run before killing them. +# CONFIG_THTTPD_CHARSET- The default character set name to use with +# text MIME types. +# CONFIG_THTTPD_IOBUFFERSIZE - +# CONFIG_THTTPD_INDEX_NAMES - A list of index filenames to check. The +# files are searched for in this order. +# CONFIG_AUTH_FILE - The file to use for authentication. If this is +# defined then thttpd checks for this file in the local directory +# before every fetch. If the file exists then authentication is done, +# otherwise the fetch proceeds as usual. If you leave this undefined +# then thttpd will not implement authentication at all and will not +# check for auth files, which saves a bit of CPU time. A typical +# value is ".htpasswd" +# CONFIG_THTTPD_LISTEN_BACKLOG - The listen() backlog queue length. +# CONFIG_THTTPD_LINGER_MSEC - How many milliseconds to leave a connection +# open while doing a lingering close. +# CONFIG_THTTPD_OCCASIONAL_MSEC - How often to run the occasional +# cleanup job. +# CONFIG_THTTPD_IDLE_READ_LIMIT_SEC - How many seconds to allow for +# reading the initial request on a new connection. +# CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC - How many seconds before an +# idle connection gets closed. +# CONFIG_THTTPD_TILDE_MAP1 and CONFIG_THTTPD_TILDE_MAP2 - Tilde mapping. +# Many URLs use ~username to indicate a user's home directory. thttpd +# provides two options for mapping this construct to an actual filename. +# 1) Map ~username to <prefix>/username. This is the recommended choice. +# Each user gets a subdirectory in the main web tree, and the tilde +# construct points there. The prefix could be something like "users", +# or it could be empty. +# 2) Map ~username to <user's homedir>/<postfix>. The postfix would be +# the name of a subdirectory off of the user's actual home dir, +# something like "public_html". +# You can also leave both options undefined, and thttpd will not do +# anything special about tildes. Enabling both options is an error. +# Typical values, if they're defined, are "users" for +# CONFIG_THTTPD_TILDE_MAP1 and "public_html"forCONFIG_THTTPD_TILDE_MAP2. +# CONFIG_THTTPD_GENERATE_INDICES +# CONFIG_THTTPD_URLPATTERN - If defined, then it will be used to match +# and verify referrers. +# +CONFIG_THTTPD_PORT=80 +CONFIG_THTTPD_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_THTTPD_SERVER_ADDRESS="http://www.nuttx.org" +CONFIG_THTTPD_SERVER_SOFTWARE="thttpd/2.25b 29dec2003-NuttX" +CONFIG_THTTPD_PATH="/mnt/www" +CONFIG_THTTPD_CGI_PATH="/mnt/www/cgi-bin" +CONFIG_THTTPD_CGI_PATTERN="/mnt/www/cgi-bin/*" +CONFIG_THTTPD_CGI_PRIORITY=50 +CONFIG_THTTPD_CGI_STACKSIZE=1024 +CONFIG_THTTPD_CGI_BYTECOUNT=20000 +CONFIG_THTTPD_CGI_TIMELIMIT=0 +CONFIG_THTTPD_CHARSET="iso-8859-1" +CONFIG_THTTPD_IOBUFFERSIZE=1024 +#CONFIG_THTTPD_INDEX_NAMES +CONFIG_AUTH_FILE=n +CONFIG_THTTPD_LISTEN_BACKLOG=8 +CONFIG_THTTPD_LINGER_MSEC=500 +CONFIG_THTTPD_OCCASIONAL_MSEC=120 +CONFIG_THTTPD_IDLE_READ_LIMIT_SEC=300 +CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC=300 +CONFIG_THTTPD_TILDE_MAP1=n +CONFIG_THTTPD_TILDE_MAP2=n +CONFIG_THTTPD_GENERATE_INDICES=n +CONFIG_THTTPD_URLPATTERN=n + +# +# Additional settings for examples/thttpd +# +CONFIG_EXAMPLE_THTTPD_NOMAC=y +CONFIG_EXAMPLE_THTTPD_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_THTTPD_NETMASK=(255<<24|255<<16|255<<8|0) + +# +# Settings for examples/uip +# +CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLE_UIP_DHCPC=n + +# +# Settings for examples/nettest +# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act +# as either the client side or server side of the test +# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the +# client side simply receives messages forever, allowing +# measurement of throughput +# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has +# no MAC address; one will be assigned +# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address +# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address +# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask +# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the +# client side of the test (may be target or host) +# +CONFIG_EXAMPLE_NETTEST_SERVER=n +CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n +CONFIG_EXAMPLE_NETTEST_NOMAC=y +CONFIG_EXAMPLE_NETTEST_IPADDR=(10L<<24|0L<<16|0L<<8|2L) +CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L) +CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L) + +# +# Settings for examples/ostest +# +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_STACKSIZE - Stack size to use for new threads. +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# +# If CONFIG_NSH_TELNET is selected: +# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size +# CONFIG_NSH_DHCPC - Obtain address using DHCP +# CONFIG_NSH_IPADDR - Provides static IP address +# CONFIG_NSH_DRIPADDR - Provides static router IP address +# CONFIG_NSH_NETMASK - Provides static network mask +# CONFIG_NSH_NOMAC - Use a bogus MAC address +# +# If CONFIG_NSH_ROMFSETC is selected: +# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint +# CONFIG_NSH_INITSCRIPT - Relative path to init script +# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor +# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size +# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor +# CONFIG_NSH_FATSECTSIZE - FAT FS sector size +# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors +# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint +# +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_STRERROR=n +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_STACKSIZE=2048 +CONFIG_NSH_NESTDEPTH=3 +CONFIG_NSH_DISABLESCRIPT=n +CONFIG_NSH_DISABLEBG=n +CONFIG_NSH_ROMFSETC=n +CONFIG_NSH_CONSOLE=y +CONFIG_NSH_TELNET=n +CONFIG_NSH_ARCHINIT=n +CONFIG_NSH_IOBUFFER_SIZE=512 +CONFIG_NSH_DHCPC=n +CONFIG_NSH_NOMAC=n +CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_NSH_ROMFSMOUNTPT="/etc" +CONFIG_NSH_INITSCRIPT="init.d/rcS" +CONFIG_NSH_ROMFSDEVNO=0 +CONFIG_NSH_ROMFSSECTSIZE=64 +CONFIG_NSH_FATDEVNO=1 +CONFIG_NSH_FATSECTSIZE=512 +CONFIG_NSH_FATNSECTORS=1024 +CONFIG_NSH_FATMOUNTPT=/tmp + +# Disable several other NSH commands (this is only for testing FTPC) +CONFIG_NSH_DISABLE_WGET=y +CONFIG_NSH_DISABLE_PUT=y +CONFIG_NSH_DISABLE_GET=y + +# +# Architecture-specific NSH options +# +CONFIG_NSH_MMCSDSPIPORTNO=0 +CONFIG_NSH_MMCSDSLOTNO=0 +CONFIG_NSH_MMCSDMINOR=0 + +# +# Settings for examples/usbserial +# +# CONFIG_EXAMPLES_USBSERIAL_INONLY +# Only verify IN (device-to-host) data transfers. Default: both +# CONFIG_EXAMPLES_USBSERIAL_OUTONLY +# Only verify OUT (host-to-device) data transfers. Default: both +# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL +# Send only small, single packet messages. Default: Send large and small. +# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG +# Send only large, multi-packet messages. Default: Send large and small. +# +CONFIG_EXAMPLES_USBSERIAL_INONLY=n +CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n +CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n +CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n + +CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n +CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n +CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n +CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n +CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the LPC17xx which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=8192 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script b/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script new file mode 100755 index 000000000..1dba6b80d --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script @@ -0,0 +1,109 @@ +/**************************************************************************** + * configs/olimex-lpc1766stk/ftpc/ld.script + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and + * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address + * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses + * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit + * into the 32Kb CPU SRAM address range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K + sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + _eronly = ABSOLUTE(.); /* See below */ + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .ARM.extab : { + *(.ARM.extab*) + } >sram + + .ARM.exidx : { + __exidx_start = ABSOLUTE(.); + *(.ARM.exidx*) + __exidx_end = ABSOLUTE(.); + } >sram + + .bss : { /* BSS */ + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/setenv.sh b/nuttx/configs/olimex-lpc1766stk/ftpc/setenv.sh new file mode 100755 index 000000000..04c426b52 --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/setenv.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# configs/olimex-lpc1766stk/ftpc/setenv.sh +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools" +export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" |