diff options
5 files changed, 439 insertions, 437 deletions
diff --git a/nuttx/arch/z16/src/z16f/chip.h b/nuttx/arch/z16/src/z16f/chip.h index 484977b2e..6b55fa882 100644 --- a/nuttx/arch/z16/src/z16f/chip.h +++ b/nuttx/arch/z16/src/z16f/chip.h @@ -70,58 +70,58 @@ /* Z16F Chip Variants ***************************************************************/ #if defined(CONFIG_ARCH_CHIP_Z16F2810) -# define Z16F_INVMEM_SIZE (128*1024) -# define Z16F_IRAM_SIZE (4*1024) +# define Z16F_INVMEM_SIZE (128*1024) +# define Z16F_IRAM_SIZE (4*1024) # undef Z16F_HAVE_EXTMEM # undef Z16F_HAVE_GPIO_PORTJ # undef Z16F_HAVE_GPIO_PORTK #elif defined(CONFIG_ARCH_CHIP_Z16F2811) -# define Z16F_INVMEM_SIZE (128*1024) -# define Z16F_IRAM_SIZE (4*1024) -# define Z16F_HAVE_EXTMEM 1 -# define Z16F_HAVE_GPIO_PORTJ 1 -# define Z16F_HAVE_GPIO_PORTK 1 +# define Z16F_INVMEM_SIZE (128*1024) +# define Z16F_IRAM_SIZE (4*1024) +# define Z16F_HAVE_EXTMEM 1 +# define Z16F_HAVE_GPIO_PORTJ 1 +# define Z16F_HAVE_GPIO_PORTK 1 #elif defined(CONFIG_ARCH_CHIP_Z16F3211) -# define Z16F_INVMEM_SIZE (32*1024) -# define Z16F_IRAM_SIZE (2*1024) -# define Z16F_HAVE_EXTMEM 1 +# define Z16F_INVMEM_SIZE (32*1024) +# define Z16F_IRAM_SIZE (2*1024) +# define Z16F_HAVE_EXTMEM 1 #elif defined(CONFIG_ARCH_CHIP_Z16F6411) -# define Z16F_INVMEM_SIZE (64*1024) -# define Z16F_IRAM_SIZE (4*1024) -# define Z16F_HAVE_EXTMEM 1 +# define Z16F_INVMEM_SIZE (64*1024) +# define Z16F_IRAM_SIZE (4*1024) +# define Z16F_HAVE_EXTMEM 1 #else # error "Z16F chip variant not specified" #endif /* Flash option settings at address 0x00000000 ************************************/ -#define Z16F_FLOPTION0 rom char _flash_option0 _At 0x0 -#define Z16F_FLOPTION1 rom char _flash_option1 _At 0x1 -#define Z16F_FLOPTION2 rom char _flash_option2 _At 0x2 -#define Z16F_FLOPTION3 rom char _flash_option3 _At 0x3 - -#define Z16F_FLOPTION0_OSCSEL _HX8(c0) /* Bits 6-7: OSC_SEL */ -#define Z16F_FLOPTION0_EXTRNRC _HX8(00) /* 00: On-chip oscillator with ext RC networks */ -#define Z16F_FLOPTION0_LOWFREQ _HX8(40) /* 01: Min. power with very low frequency crystals */ -#define Z16F_FLOPTION0_MEDFREQ _HX8(80) /* 10: Medium power with medium frequency crystals */ -#define Z16F_FLOPTION0_MAXPWR _HX8(c0) /* 11: Maximum power with high frequency crystals */ -#define Z16F_FLOPTION0_WDTRES _HX8(20) /* Bit 5: WDT Reset */ -#define Z16F_FLOPTION0_WDTA0 _HX8(10) /* Bit 4: WDT Always On */ -#define Z16F_FLOPTION0_VBOA0 _HX8(08) /* Bit 3: Voltage Brown-Out Protection Always On */ -#define Z16F_FLOPTION0_DBGUART _HX8(04) /* Bit 2: Debug UART Enable */ -#define Z16F_FLOPTION0_FWP _HX8(02) /* Bit 1: Flash Write Protect */ -#define Z16F_FLOPTION0_RP _HX8(01) /* Bit 0: Read Protect */ - -#define Z16F_FLOPTION1_RESVD _HX8(f8) /* Bits 3-7: Reserved */ -#define Z16F_FLOPTION1_MCEN _HX8(04) /* Bit 2: Motor control pins enable */ -#define Z16F_FLOPTION1_OFFH _HX8(02) /* Bit 1: High side OFF */ -#define Z16F_FLOPTION1_OFFL _HX8(01) /* Bit 0: Low side OFF */ - -#define Z16F_FLOPTION2_RESVD _HX8(ff) /* Bits 0-7: reserved */ - -#define Z16F_FLOPTION3_ROMLESS _HX8(80) /* Bit 7: ROMLESS 16 Select */ -#define Z16F_FLOPTION3_NORMAL _HX8(40) /* Bit 6: 1:Normal 0:Low power mode */ -#define Z16F_FLOPTION3_RESVD _HX8(3f) /* Bits 0-5: Reserved */ +#define Z16F_FLOPTION0 rom char _flash_option0 _At 0x0 +#define Z16F_FLOPTION1 rom char _flash_option1 _At 0x1 +#define Z16F_FLOPTION2 rom char _flash_option2 _At 0x2 +#define Z16F_FLOPTION3 rom char _flash_option3 _At 0x3 + +#define Z16F_FLOPTION0_OSCSEL _HX8(c0) /* Bits 6-7: OSC_SEL */ +#define Z16F_FLOPTION0_EXTRNRC _HX8(00) /* 00: On-chip oscillator with ext RC networks */ +#define Z16F_FLOPTION0_LOWFREQ _HX8(40) /* 01: Min. power with very low frequency crystals */ +#define Z16F_FLOPTION0_MEDFREQ _HX8(80) /* 10: Medium power with medium frequency crystals */ +#define Z16F_FLOPTION0_MAXPWR _HX8(c0) /* 11: Maximum power with high frequency crystals */ +#define Z16F_FLOPTION0_WDTRES _HX8(20) /* Bit 5: WDT Reset */ +#define Z16F_FLOPTION0_WDTA0 _HX8(10) /* Bit 4: WDT Always On */ +#define Z16F_FLOPTION0_VBOA0 _HX8(08) /* Bit 3: Voltage Brown-Out Protection Always On */ +#define Z16F_FLOPTION0_DBGUART _HX8(04) /* Bit 2: Debug UART Enable */ +#define Z16F_FLOPTION0_FWP _HX8(02) /* Bit 1: Flash Write Protect */ +#define Z16F_FLOPTION0_RP _HX8(01) /* Bit 0: Read Protect */ + +#define Z16F_FLOPTION1_RESVD _HX8(f8) /* Bits 3-7: Reserved */ +#define Z16F_FLOPTION1_MCEN _HX8(04) /* Bit 2: Motor control pins enable */ +#define Z16F_FLOPTION1_OFFH _HX8(02) /* Bit 1: High side OFF */ +#define Z16F_FLOPTION1_OFFL _HX8(01) /* Bit 0: Low side OFF */ + +#define Z16F_FLOPTION2_RESVD _HX8(ff) /* Bits 0-7: reserved */ + +#define Z16F_FLOPTION3_ROMLESS _HX8(80) /* Bit 7: ROMLESS 16 Select */ +#define Z16F_FLOPTION3_NORMAL _HX8(40) /* Bit 6: 1:Normal 0:Low power mode */ +#define Z16F_FLOPTION3_RESVD _HX8(3f) /* Bits 0-5: Reserved */ /* Memory areas ******************************************************************* * @@ -129,366 +129,366 @@ * of the internal non-volatile memory is chip-dependent. */ -#define Z16F_INVMEM_BASE _HX32(00000000) +#define Z16F_INVMEM_BASE _HX32(00000000) /* Most chip variants support external memory */ #ifdef Z16F_HAVE_EXTMEM -# define Z16F_EXTMEMCS0_BASE _HX32(00000000) /* External memory at CS0 */ -# define Z16F_EXTMEMCS0_SIZE _HX32(007e0000) /* (actual depends on board) */ -# define Z16F_EXTMEMCS1_BASE _HX32(ff800000) /* External memory at CS1 */ -# define Z16F_EXTMEMCS1_SIZE _HX32(00700000) /* (actual depends on board) */ -# define Z16F_EXTMEMCS2A_BASE _HX32(fff00000) /* External memory at CS2 */ -# define Z16F_EXTMEMCS2A_SIZE _HX32(000f8000) /* (actual depends on board) */ -# define Z16F_EXTMEMCS2B_BASE _HX32(ffffc000) /* External memory at CS2 */ -# define Z16F_EXTMEMCS2B_SIZE _HX32(00000800) /* (actual depends on board) */ +# define Z16F_EXTMEMCS0_BASE _HX32(00000000) /* External memory at CS0 */ +# define Z16F_EXTMEMCS0_SIZE _HX32(007e0000) /* (actual depends on board) */ +# define Z16F_EXTMEMCS1_BASE _HX32(ff800000) /* External memory at CS1 */ +# define Z16F_EXTMEMCS1_SIZE _HX32(00700000) /* (actual depends on board) */ +# define Z16F_EXTMEMCS2A_BASE _HX32(fff00000) /* External memory at CS2 */ +# define Z16F_EXTMEMCS2A_SIZE _HX32(000f8000) /* (actual depends on board) */ +# define Z16F_EXTMEMCS2B_BASE _HX32(ffffc000) /* External memory at CS2 */ +# define Z16F_EXTMEMCS2B_SIZE _HX32(00000800) /* (actual depends on board) */ #endif /* Internal RAM always ends at 0xffbfff. The IRAM base address depends * on the size of the IRAM supported by the chip. */ -#define Z16F_IRAM_BASE (_HX32(ffffc000) - Z16F_IRAM_SIZE) +#define Z16F_IRAM_BASE (_HX32(ffffc000) - Z16F_IRAM_SIZE) /* External memory mapped peripherals, internal I/O memory and SFRS */ -#define Z16F_EXTIO_BASE _HX32(ffffc800) /* External peripherals CS3-5 */ -#define Z16F_EXTIO_SIZE _HX32(00001800) -#define Z16F_IIO_BASE _HX32(ffffe000) /* Internal I/O memory and SFRs */ -#define Z16F_IIO_SIZE _HX32(00001fff) +#define Z16F_EXTIO_BASE _HX32(ffffc800) /* External peripherals CS3-5 */ +#define Z16F_EXTIO_SIZE _HX32(00001800) +#define Z16F_IIO_BASE _HX32(ffffe000) /* Internal I/O memory and SFRs */ +#define Z16F_IIO_SIZE _HX32(00001fff) /* Control Registers ***************************************************************/ -#define Z16F_CNTRL_PCOV _HX32(ffffe004) /* 32-bits: Program counter overflow */ -#define Z16F_CNTRL_SPOV _HX32(ffffe00c) /* 32-bits: Stack pointer overflow */ -#define Z16F_CNTRL_FLAGS _HX32(ffffe100) /* 8-bits: flags */ -#define Z16F_CNTRL_CPUCTL _HX32(ffffe102) /* 8-bits: CPU control */ +#define Z16F_CNTRL_PCOV _HX32(ffffe004) /* 32-bits: Program counter overflow */ +#define Z16F_CNTRL_SPOV _HX32(ffffe00c) /* 32-bits: Stack pointer overflow */ +#define Z16F_CNTRL_FLAGS _HX32(ffffe100) /* 8-bits: flags */ +#define Z16F_CNTRL_CPUCTL _HX32(ffffe102) /* 8-bits: CPU control */ /* Flag register bits ***************************************************************/ -#define Z16F_CNTRL_FLAGS_C _HX8(80) /* Bit 7: Carry flag */ -#define Z16F_CNTRL_FLAGS_Z _HX8(40) /* Bit 6: Zero flag */ -#define Z16F_CNTRL_FLAGS_S _HX8(20) /* Bit 5: Sign flag */ -#define Z16F_CNTRL_FLAGS_V _HX8(10) /* Bit 4: Overflow flag */ -#define Z16F_CNTRL_FLAGS_B _HX8(08) /* Bit 3: Blank flag */ -#define Z16F_CNTRL_FLAGS_F1 _HX8(04) /* Bit 2: User flag 1 */ -#define Z16F_CNTRL_FLAGS_CIRQE _HX8(02) /* Bit 1: Chained interrupt enable */ -#define Z16F_CNTRL_FLAGS_IRQE _HX8(01) /* Bit 0: Master interrupt enable */ +#define Z16F_CNTRL_FLAGS_C _HX8(80) /* Bit 7: Carry flag */ +#define Z16F_CNTRL_FLAGS_Z _HX8(40) /* Bit 6: Zero flag */ +#define Z16F_CNTRL_FLAGS_S _HX8(20) /* Bit 5: Sign flag */ +#define Z16F_CNTRL_FLAGS_V _HX8(10) /* Bit 4: Overflow flag */ +#define Z16F_CNTRL_FLAGS_B _HX8(08) /* Bit 3: Blank flag */ +#define Z16F_CNTRL_FLAGS_F1 _HX8(04) /* Bit 2: User flag 1 */ +#define Z16F_CNTRL_FLAGS_CIRQE _HX8(02) /* Bit 1: Chained interrupt enable */ +#define Z16F_CNTRL_FLAGS_IRQE _HX8(01) /* Bit 0: Master interrupt enable */ /* CPU control register bits ********************************************************/ - /* Bits 7-2: Reserved, must be zero */ - /* Bits 1-0: DMA bandwidth control */ -#define Z16F_CNTRL_CPUCTL_BWALL _HX8(00) /* DMA can consume 100% bandwidth */ -#define Z16F_CNTRL_CPUCTL_BW11 _HX8(01) /* DMA can do 1 transaction per 1 cycle */ -#define Z16F_CNTRL_CPUCTL_BW12 _HX8(01) /* DMA can do 1 transaction per 2 cycles */ -#define Z16F_CNTRL_CPUCTL_BW13 _HX8(01) /* DMA can do 1 transaction per 3 cycles */ + /* Bits 7-2: Reserved, must be zero */ + /* Bits 1-0: DMA bandwidth control */ +#define Z16F_CNTRL_CPUCTL_BWALL _HX8(00) /* DMA can consume 100% bandwidth */ +#define Z16F_CNTRL_CPUCTL_BW11 _HX8(01) /* DMA can do 1 transaction per 1 cycle */ +#define Z16F_CNTRL_CPUCTL_BW12 _HX8(01) /* DMA can do 1 transaction per 2 cycles */ +#define Z16F_CNTRL_CPUCTL_BW13 _HX8(01) /* DMA can do 1 transaction per 3 cycles */ /* Trace registers ******************************************************************/ -#define Z16F_TRACE_CTL _HX32(ffffe013) /* 8-bit: Trace Control */ -#define Z16F_TRACE_ADDR _HX32(ffffe014) /* 32-bit: Trace Address */ +#define Z16F_TRACE_CTL _HX32(ffffe013) /* 8-bit: Trace Control */ +#define Z16F_TRACE_ADDR _HX32(ffffe014) /* 32-bit: Trace Address */ /* Interrupt controller registers ***************************************************/ -#define Z16F_SYSEXCP _HX32(ffffe020) /* 16-bit: System Exception Status */ -# define Z16F_SYSEXCPH _HX32(ffffe020) /* 8-bit: System Exception Status High */ -# define Z16F_SYSEXCPL _HX32(ffffe021) /* 8-bit: System Exception Status Low */ -#define Z16F_LASTIRQ _HX32(ffffe023) /* 8-bit: Last IRQ Register */ -#define Z16F_IRQ0 _HX32(ffffe030) /* 8-bit: Interrupt Request 0 */ -#define Z16F_IRQ0_SET _HX32(ffffe031) /* 8-bit: Interrupt Request 0 Set */ -#define Z16F_IRQ0_EN _HX32(ffffe032) /* 16-bit: IRQ0 Enable */ -# define Z16F_IRQ0_ENH _HX32(ffffe032) /* 8-bit: IRQ0 Enable High Bit */ -# define Z16F_IRQ0_ENL _HX32(ffffe033) /* 8-bit: IRQ0 Enable Low Bit */ -#define Z16F_IRQ1 _HX32(ffffe034) /* 8-bit: Interrupt Request 1 */ -#define Z16F_IRQ1_SET _HX32(ffffe035) /* 8-bit: Interrupt Request 1 Set */ -#define Z16F_IRQ1_EN _HX32(ffffe036) /* 16-bit: IRQ1 Enable */ -# define Z16F_IRQ1_ENH _HX32(ffffe036) /* 8-bit: IRQ1 Enable High Bit */ -# define Z16F_IRQ1_ENL _HX32(ffffe037) /* 8-bit: IRQ1 Enable Low Bit */ -#define Z16F_IRQ2 _HX32(ffffe038) /* 8-bit: Interrupt Request 2 */ -#define Z16F_IRQ2_SET _HX32(ffffe039) /* 8-bit Interrupt Request 2 Set */ -#define Z16F_IRQ2_EN _HX32(ffffe03a) /* 16-bit: IRQ2 Enable */ -# define Z16F_IRQ2_ENH _HX32(ffffe03a) /* 8-bit: IRQ2 Enable High Bit */ -# define Z16F_IRQ2_ENL _HX32(ffffe03c) /* 8-bit: IRQ2 Enable Low Bit */ +#define Z16F_SYSEXCP _HX32(ffffe020) /* 16-bit: System Exception Status */ +# define Z16F_SYSEXCPH _HX32(ffffe020) /* 8-bit: System Exception Status High */ +# define Z16F_SYSEXCPL _HX32(ffffe021) /* 8-bit: System Exception Status Low */ +#define Z16F_LASTIRQ _HX32(ffffe023) /* 8-bit: Last IRQ Register */ +#define Z16F_IRQ0 _HX32(ffffe030) /* 8-bit: Interrupt Request 0 */ +#define Z16F_IRQ0_SET _HX32(ffffe031) /* 8-bit: Interrupt Request 0 Set */ +#define Z16F_IRQ0_EN _HX32(ffffe032) /* 16-bit: IRQ0 Enable */ +# define Z16F_IRQ0_ENH _HX32(ffffe032) /* 8-bit: IRQ0 Enable High Bit */ +# define Z16F_IRQ0_ENL _HX32(ffffe033) /* 8-bit: IRQ0 Enable Low Bit */ +#define Z16F_IRQ1 _HX32(ffffe034) /* 8-bit: Interrupt Request 1 */ +#define Z16F_IRQ1_SET _HX32(ffffe035) /* 8-bit: Interrupt Request 1 Set */ +#define Z16F_IRQ1_EN _HX32(ffffe036) /* 16-bit: IRQ1 Enable */ +# define Z16F_IRQ1_ENH _HX32(ffffe036) /* 8-bit: IRQ1 Enable High Bit */ +# define Z16F_IRQ1_ENL _HX32(ffffe037) /* 8-bit: IRQ1 Enable Low Bit */ +#define Z16F_IRQ2 _HX32(ffffe038) /* 8-bit: Interrupt Request 2 */ +#define Z16F_IRQ2_SET _HX32(ffffe039) /* 8-bit Interrupt Request 2 Set */ +#define Z16F_IRQ2_EN _HX32(ffffe03a) /* 16-bit: IRQ2 Enable */ +# define Z16F_IRQ2_ENH _HX32(ffffe03a) /* 8-bit: IRQ2 Enable High Bit */ +# define Z16F_IRQ2_ENL _HX32(ffffe03c) /* 8-bit: IRQ2 Enable Low Bit */ /* System exception status register bit definitions *********************************/ -#define Z16F_SYSEXCPH_SPOVF _HX8(80) /* Bit 7: Stack pointer overflow */ -#define Z16F_SYSEXCPH_PCOVF _HX8(40) /* Bit 6: Program counter overflow */ -#define Z16F_SYSEXCPH_DIV0 _HX8(20) /* Bit 5: Divide by zero */ -#define Z16F_SYSEXCPH_DIVOVF _HX8(10) /* Bit 4: Divide overflow */ -#define Z16F_SYSEXCPH_ILL _HX8(08) /* Bit 3: Illegal instruction */ - /* Bits 0-2: Reserved */ - /* Bits 3-7: Reserved */ -#define Z16F_SYSEXCPL_WDTOSC _HX8(04) /* Bit 2: WDT oscillator failure */ -#define Z16F_SYSEXCPL_PRIOSC _HX8(02) /* Bit 1: Primary oscillator failure */ -#define Z16F_SYSEXCPL_WDT _HX8(01) /* Bit 0: Watchdog timer interrupt */ - -#define Z16F_SYSEXCP_SPOVF (Z16F_SYSEXCPH_SPOVF << 8) -#define Z16F_SYSEXCP_PCOVF (Z16F_SYSEXCPH_PCOVF << 8) -#define Z16F_SYSEXCP_DIV0 (Z16F_SYSEXCPH_DIV0 << 8) -#define Z16F_SYSEXCP_DIVOVF (Z16F_SYSEXCPH_DIVOVF << 8) -#define Z16F_SYSEXCP_ILL (Z16F_SYSEXCPH_ILL << 8) -#define Z16F_SYSEXCP_WDTOSC Z16F_SYSEXCPL_WDTOSC -#define Z16F_SYSEXCP_PRIOSC Z16F_SYSEXCPL_PRIOSC -#define Z16F_SYSEXCP_WDT Z16F_SYSEXCPL_WDT +#define Z16F_SYSEXCPH_SPOVF _HX8(80) /* Bit 7: Stack pointer overflow */ +#define Z16F_SYSEXCPH_PCOVF _HX8(40) /* Bit 6: Program counter overflow */ +#define Z16F_SYSEXCPH_DIV0 _HX8(20) /* Bit 5: Divide by zero */ +#define Z16F_SYSEXCPH_DIVOVF _HX8(10) /* Bit 4: Divide overflow */ +#define Z16F_SYSEXCPH_ILL _HX8(08) /* Bit 3: Illegal instruction */ + /* Bits 0-2: Reserved */ + /* Bits 3-7: Reserved */ +#define Z16F_SYSEXCPL_WDTOSC _HX8(04) /* Bit 2: WDT oscillator failure */ +#define Z16F_SYSEXCPL_PRIOSC _HX8(02) /* Bit 1: Primary oscillator failure */ +#define Z16F_SYSEXCPL_WDT _HX8(01) /* Bit 0: Watchdog timer interrupt */ + +#define Z16F_SYSEXCP_SPOVF (Z16F_SYSEXCPH_SPOVF << 8) +#define Z16F_SYSEXCP_PCOVF (Z16F_SYSEXCPH_PCOVF << 8) +#define Z16F_SYSEXCP_DIV0 (Z16F_SYSEXCPH_DIV0 << 8) +#define Z16F_SYSEXCP_DIVOVF (Z16F_SYSEXCPH_DIVOVF << 8) +#define Z16F_SYSEXCP_ILL (Z16F_SYSEXCPH_ILL << 8) +#define Z16F_SYSEXCP_WDTOSC Z16F_SYSEXCPL_WDTOSC +#define Z16F_SYSEXCP_PRIOSC Z16F_SYSEXCPL_PRIOSC +#define Z16F_SYSEXCP_WDT Z16F_SYSEXCPL_WDT /* External memory interface ********************************************************/ -#define Z16F_EXTCT _HX32(ffffe070) /* External Interface Control */ -#define Z16F_EXTCS0 _HX32(ffffe072) /* Chip Select 0 Control */ -# define Z16F_EXTCS0H _HX32(ffffe072) /* Chip Select 0 Control High */ -# define Z16F_EXTCS0L _HX32(ffffe073) /* Chip Select 0 Control Low */ -#define Z16F_EXTCS1 _HX32(ffffe074) /* Chip Select 1 Control */ -# define Z16F_EXTCS1H _HX32(ffffe074) /* Chip Select 1 Control High */ -# define Z16F_EXTCS1L _HX32(ffffe075) /* Chip Select 1 Control Low */ -#define Z16F_EXTCS2 _HX32(ffffe076) /* Chip Select 2 Control */ -# define Z16F_EXTCS2H _HX32(ffffe076) /* Chip Select 2 Control High */ -# define Z16F_EXTCS2L _HX32(ffffe077) /* Chip Select 2 Control Low */ -#define Z16F_EXTCS3 _HX32(ffffe078) /* Chip Select 3 Control */ -# define Z16F_EXTCS3H _HX32(ffffe078) /* Chip Select 3 Control High */ -# define Z16F_EXTCS3L _HX32(ffffe079) /* Chip Select 3 Control Low */ -#define Z16F_EXTCS4 _HX32(ffffe07a) /* Chip Select 4 Control */ -# define Z16F_EXTCS4H _HX32(ffffe07a) /* Chip Select 4 Control High */ -# define Z16F_EXTCS4L _HX32(ffffe07b) /* Chip Select 4 Control Low */ -#define Z16F_EXTCS5 _HX32(ffffe07c) /* Chip Select 5 Control */ -# define Z16F_EXTCS5H _HX32(ffffe07c) /* Chip Select 5 Control High */ -# define Z16F_EXTCS5L _HX32(ffffe07d) /* Chip Select 5 Control Low */ +#define Z16F_EXTCT _HX32(ffffe070) /* External Interface Control */ +#define Z16F_EXTCS0 _HX32(ffffe072) /* Chip Select 0 Control */ +# define Z16F_EXTCS0H _HX32(ffffe072) /* Chip Select 0 Control High */ +# define Z16F_EXTCS0L _HX32(ffffe073) /* Chip Select 0 Control Low */ +#define Z16F_EXTCS1 _HX32(ffffe074) /* Chip Select 1 Control */ +# define Z16F_EXTCS1H _HX32(ffffe074) /* Chip Select 1 Control High */ +# define Z16F_EXTCS1L _HX32(ffffe075) /* Chip Select 1 Control Low */ +#define Z16F_EXTCS2 _HX32(ffffe076) /* Chip Select 2 Control */ +# define Z16F_EXTCS2H _HX32(ffffe076) /* Chip Select 2 Control High */ +# define Z16F_EXTCS2L _HX32(ffffe077) /* Chip Select 2 Control Low */ +#define Z16F_EXTCS3 _HX32(ffffe078) /* Chip Select 3 Control */ +# define Z16F_EXTCS3H _HX32(ffffe078) /* Chip Select 3 Control High */ +# define Z16F_EXTCS3L _HX32(ffffe079) /* Chip Select 3 Control Low */ +#define Z16F_EXTCS4 _HX32(ffffe07a) /* Chip Select 4 Control */ +# define Z16F_EXTCS4H _HX32(ffffe07a) /* Chip Select 4 Control High */ +# define Z16F_EXTCS4L _HX32(ffffe07b) /* Chip Select 4 Control Low */ +#define Z16F_EXTCS5 _HX32(ffffe07c) /* Chip Select 5 Control */ +# define Z16F_EXTCS5H _HX32(ffffe07c) /* Chip Select 5 Control High */ +# define Z16F_EXTCS5L _HX32(ffffe07d) /* Chip Select 5 Control Low */ /* Oscillator control registers *****************************************************/ -#define Z16F_OSC_CTL _HX32(ffffe0A0) /* 8-bit: Oscillator Control */ -#define Z16F_OSC_DIV _HX32(ffffe0A1) /* 8-bit: Oscillator Divide */ +#define Z16F_OSC_CTL _HX32(ffffe0A0) /* 8-bit: Oscillator Control */ +#define Z16F_OSC_DIV _HX32(ffffe0A1) /* 8-bit: Oscillator Divide */ /* Oscillator control register bits *************************************************/ -#define Z16F_OSCCTL_INTEN _HX8(80) /* Bit 7: Internal oscillator enabled */ -#define Z16F_OSCCTL_XTLEN _HX8(40) /* Bit 6: Crystal oscillator enabled */ -#define Z16F_OSCCTL_WDTEN _HX8(20) /* Bit 5: Watchdog timer enabled */ -#define Z16F_OSCCTL_POFEN _HX8(10) /* Bit 4: Failure detection enabled */ -#define Z16F_OSCCTL_WDFEN _HX8(08) /* Bit 3: WD Failure detection enabled*/ -#define Z16F_OSCCTL_FLPEN _HX8(04) /* Bit 2: Flash low power enabled */ -#define Z16F_OSCCTL_INT56 _HX8(00) /* Bits 0-1=0: Internal 5.6 MHz */ -#define Z16F_OSCCTL_EXTCLK _HX8(02) /* Bits 0-1=2: External clock */ -#define Z16F_OSCCTL_WDT10KHZ _HX8(03) /* Bits 0-1=3: WD Timer 10 KHz*/ +#define Z16F_OSCCTL_INTEN _HX8(80) /* Bit 7: Internal oscillator enabled */ +#define Z16F_OSCCTL_XTLEN _HX8(40) /* Bit 6: Crystal oscillator enabled */ +#define Z16F_OSCCTL_WDTEN _HX8(20) /* Bit 5: Watchdog timer enabled */ +#define Z16F_OSCCTL_POFEN _HX8(10) /* Bit 4: Failure detection enabled */ +#define Z16F_OSCCTL_WDFEN _HX8(08) /* Bit 3: WD Failure detection enabled*/ +#define Z16F_OSCCTL_FLPEN _HX8(04) /* Bit 2: Flash low power enabled */ +#define Z16F_OSCCTL_INT56 _HX8(00) /* Bits 0-1=0: Internal 5.6 MHz */ +#define Z16F_OSCCTL_EXTCLK _HX8(02) /* Bits 0-1=2: External clock */ +#define Z16F_OSCCTL_WDT10KHZ _HX8(03) /* Bits 0-1=3: WD Timer 10 KHz*/ /* GPIO Port A-K ********************************************************************/ -#define Z16F_GPIOA_IN _HX32(ffffe100) /* 8-bits: Port A Input Data */ -#define Z16F_GPIOA_OUT _HX32(ffffe101) /* 8-bits: Port A Output Data */ -#define Z16F_GPIOA_DD _HX32(ffffe102) /* 8-bits: Port A Data Direction */ -#define Z16F_GPIOA_HDE _HX32(ffffe103) /* 8-bits: Port A High Drive Enable */ -#define Z16F_GPIOA_AF _HX32(ffffe104) /* 16-bits: Port A Alternate Function */ -# define Z16F_GPIOA_AFH _HX32(ffffe104) /* 8-bits: Port A Alternate Function High */ -# define Z16F_GPIOA_AFL _HX32(ffffe105) /* 8-bits: Port A Alternate Function Low */ -#define Z16F_GPIOA_OC _HX32(ffffe106) /* 8-bits: Port A Output Control */ -#define Z16F_GPIOA_PUE _HX32(ffffe107) /* 8-bits: Port A Pull-Up Enable */ -#define Z16F_GPIOA_SMRE _HX32(ffffe108) /* 8-bits: Port A Stop Mode Recovery En */ -#define Z16F_GPIOA_IMUX1 _HX32(ffffe10c) /* 8-bits: Port A IRQ Mux 1 */ -#define Z16F_GPIOA_IMUX _HX32(ffffe10e) /* 8-bits: Port A IRQ Mux */ -#define Z16F_GPIOA_IEDGE _HX32(ffffe10f) /* 8-bits: Port A IRQ Edge */ - -#define Z16F_GPIOB_IN _HX32(ffffe110) /* 8-bits: Port B Input Data */ -#define Z16F_GPIOB_OUT _HX32(ffffe111) /* 8-bits: Port B Output Data */ -#define Z16F_GPIOB_DD _HX32(ffffe112) /* 8-bits: Port B Data Direction */ -#define Z16F_GPIOB_HDE _HX32(ffffe113) /* 8-bits: Port B High Drive Enable */ -#define Z16F_GPIOB_AFL _HX32(ffffe115) /* 8-bits: Port B Alternate Function Low */ -#define Z16F_GPIOB_OC _HX32(ffffe116) /* 8-bits: Port B Output Control */ -#define Z16F_GPIOB_PUE _HX32(ffffe117) /* 8-bits: Port B Pull-Up Enable */ -#define Z16F_GPIOB_SMRE _HX32(ffffe118) /* 8-bits: Port B Stop Mode Recovery En */ - -#define Z16F_GPIOC_IN _HX32(ffffe120) /* 8-bits: Port C Input Data */ -#define Z16F_GPIOC_OUT _HX32(ffffe121) /* 8-bits: Port C Output Data */ -#define Z16F_GPIOC_DD _HX32(ffffe122) /* 8-bits: Port C Data Direction */ -#define Z16F_GPIOC_HDE _HX32(ffffe123) /* 8-bits: Port C High Drive Enable */ -#define Z16F_GPIOC_AF _HX32(ffffe124) /* 16-bits: Port C Alternate Function */ -# define Z16F_GPIOC_AFH _HX32(ffffe124) /* 8-bits: Port C Alternate Function High */ -# define Z16F_GPIOC_AFL _HX32(ffffe125) /* 8-bits: Port C Alternate Function Low */ -#define Z16F_GPIOC_OC _HX32(ffffe126) /* 8-bits: Port C Output Control */ -#define Z16F_GPIOC_PUE _HX32(ffffe127) /* 8-bits: Port C Pull-Up Enable */ -#define Z16F_GPIOC_SMRE _HX32(ffffe128) /* 8-bits: Port C Stop Mode Recovery En */ -#define Z16F_GPIOC_IMUX _HX32(ffffe12e) /* 8-bits: Port C IRQ Mux */ - -#define Z16F_GPIOD_IN _HX32(ffffe130) /* 8-bits: Port D Input Data */ -#define Z16F_GPIOD_OUT _HX32(ffffe131) /* 8-bits: Port D Output Data */ -#define Z16F_GPIOD_DD _HX32(ffffe132) /* 8-bits: Port D Data Direction */ -#define Z16F_GPIOD_HDE _HX32(ffffe133) /* 8-bits: Port D High Drive Enable */ -#define Z16F_GPIOD_AF _HX32(ffffe134) /* 16-bits: Port D Alternate Function */ -# define Z16F_GPIOD_AFH _HX32(ffffe134) /* 8-bits: Port D Alternate Function High */ -# define Z16F_GPIOD_AFL _HX32(ffffe135) /* 8-bits: Port D Alternate Function Low */ -#define Z16F_GPIOD_OC _HX32(ffffe136) /* 8-bits: Port D Output Control */ -#define Z16F_GPIOD_PUE _HX32(ffffe137) /* 8-bits: Port D Pull-Up Enable */ -#define Z16F_GPIOD_SMRE _HX32(ffffe138) /* 8-bits: Port D Stop Mode Recovery En */ - -#define Z16F_GPIOE_IN _HX32(ffffe140) /* 8-bits: Port E Input Data */ -#define Z16F_GPIOE_OUT _HX32(ffffe141) /* 8-bits: Port E Output Data */ -#define Z16F_GPIOE_DD _HX32(ffffe142) /* 8-bits: Port E Data Direction */ -#define Z16F_GPIOE_HDE _HX32(ffffe143) /* 8-bits: Port E High Drive Enable */ -#define Z16F_GPIOE_OC _HX32(ffffe146) /* 8-bits: Port E Output Control */ -#define Z16F_GPIOE_PUE _HX32(ffffe147) /* 8-bits: Port E Pull-Up Enable */ -#define Z16F_GPIOE_SMRE _HX32(ffffe148) /* 8-bits: Port E Stop Mode Recovery En */ - -#define Z16F_GPIOF_IN _HX32(ffffe150) /* 8-bits: Port F Input Data */ -#define Z16F_GPIOF_OUT _HX32(ffffe151) /* 8-bits: Port F Output Data */ -#define Z16F_GPIOF_DD _HX32(ffffe152) /* 8-bits: Port F Data Direction */ -#define Z16F_GPIOF_HDE _HX32(ffffe153) /* 8-bits: Port F High Drive Enable */ -#define Z16F_GPIOF_AFL _HX32(ffffe155) /* 8-bits: Port F Alternate Function Low */ -#define Z16F_GPIOF_OC _HX32(ffffe156) /* 8-bits: Port F Output Control */ -#define Z16F_GPIOF_PUE _HX32(ffffe157) /* 8-bits: Port F Pull-Up Enable */ -#define Z16F_GPIOF_SMRE _HX32(ffffe158) /* 8-bits: Port F Stop Mode Recovery En */ - -#define Z16F_GPIOG_IN _HX32(ffffe160) /* 8-bits: Port G Input Data */ -#define Z16F_GPIOG_OUT _HX32(ffffe161) /* 8-bits: Port G Output Data */ -#define Z16F_GPIOG_DD _HX32(ffffe162) /* 8-bits: Port G Data Direction */ -#define Z16F_GPIOG_HDE _HX32(ffffe163) /* 8-bits: Port G High Drive Enable */ -#define Z16F_GPIOG_AFL _HX32(ffffe165) /* 8-bits: Port G Alternate Function Low */ -#define Z16F_GPIOG_OC _HX32(ffffe166) /* 8-bits: Port G Output Control */ -#define Z16F_GPIOG_PUE _HX32(ffffe167) /* 8-bits: Port G Pull-Up Enable */ -#define Z16F_GPIOG_SMRE _HX32(ffffe168) /* 8-bits: Port G Stop Mode Recovery En */ - -#define Z16F_GPIOH_IN _HX32(ffffe170) /* 8-bits: Port H Input Data */ -#define Z16F_GPIOH_OUT _HX32(ffffe171) /* 8-bits: Port H Output Data */ -#define Z16F_GPIOH_DD _HX32(ffffe172) /* 8-bits: Port H Data Direction */ -#define Z16F_GPIOH_HDE _HX32(ffffe173) /* 8-bits: Port H High Drive Enable */ -#define Z16F_GPIOH_AF _HX32(ffffe174) /* 16-bits: Port H Alternate Function */ -# define Z16F_GPIOH_AFH _HX32(ffffe174) /* 8-bits: Port H Alternate Function High */ -# define Z16F_GPIOH_AFL _HX32(ffffe175) /* 8-bits: Port H Alternate Function LOw */ -#define Z16F_GPIOH_OC _HX32(ffffe176) /* 8-bits: Port H Output Control */ -#define Z16F_GPIOH_PUE _HX32(ffffe177) /* 8-bits: Port H Pull-Up Enable */ -#define Z16F_GPIOH_SMRE _HX32(ffffe178) /* 8-bits: Port H Stop Mode Recovery En */ +#define Z16F_GPIOA_IN _HX32(ffffe100) /* 8-bits: Port A Input Data */ +#define Z16F_GPIOA_OUT _HX32(ffffe101) /* 8-bits: Port A Output Data */ +#define Z16F_GPIOA_DD _HX32(ffffe102) /* 8-bits: Port A Data Direction */ +#define Z16F_GPIOA_HDE _HX32(ffffe103) /* 8-bits: Port A High Drive Enable */ +#define Z16F_GPIOA_AF _HX32(ffffe104) /* 16-bits: Port A Alternate Function */ +# define Z16F_GPIOA_AFH _HX32(ffffe104) /* 8-bits: Port A Alternate Function High */ +# define Z16F_GPIOA_AFL _HX32(ffffe105) /* 8-bits: Port A Alternate Function Low */ +#define Z16F_GPIOA_OC _HX32(ffffe106) /* 8-bits: Port A Output Control */ +#define Z16F_GPIOA_PUE _HX32(ffffe107) /* 8-bits: Port A Pull-Up Enable */ +#define Z16F_GPIOA_SMRE _HX32(ffffe108) /* 8-bits: Port A Stop Mode Recovery En */ +#define Z16F_GPIOA_IMUX1 _HX32(ffffe10c) /* 8-bits: Port A IRQ Mux 1 */ +#define Z16F_GPIOA_IMUX _HX32(ffffe10e) /* 8-bits: Port A IRQ Mux */ +#define Z16F_GPIOA_IEDGE _HX32(ffffe10f) /* 8-bits: Port A IRQ Edge */ + +#define Z16F_GPIOB_IN _HX32(ffffe110) /* 8-bits: Port B Input Data */ +#define Z16F_GPIOB_OUT _HX32(ffffe111) /* 8-bits: Port B Output Data */ +#define Z16F_GPIOB_DD _HX32(ffffe112) /* 8-bits: Port B Data Direction */ +#define Z16F_GPIOB_HDE _HX32(ffffe113) /* 8-bits: Port B High Drive Enable */ +#define Z16F_GPIOB_AFL _HX32(ffffe115) /* 8-bits: Port B Alternate Function Low */ +#define Z16F_GPIOB_OC _HX32(ffffe116) /* 8-bits: Port B Output Control */ +#define Z16F_GPIOB_PUE _HX32(ffffe117) /* 8-bits: Port B Pull-Up Enable */ +#define Z16F_GPIOB_SMRE _HX32(ffffe118) /* 8-bits: Port B Stop Mode Recovery En */ + +#define Z16F_GPIOC_IN _HX32(ffffe120) /* 8-bits: Port C Input Data */ +#define Z16F_GPIOC_OUT _HX32(ffffe121) /* 8-bits: Port C Output Data */ +#define Z16F_GPIOC_DD _HX32(ffffe122) /* 8-bits: Port C Data Direction */ +#define Z16F_GPIOC_HDE _HX32(ffffe123) /* 8-bits: Port C High Drive Enable */ +#define Z16F_GPIOC_AF _HX32(ffffe124) /* 16-bits: Port C Alternate Function */ +# define Z16F_GPIOC_AFH _HX32(ffffe124) /* 8-bits: Port C Alternate Function High */ +# define Z16F_GPIOC_AFL _HX32(ffffe125) /* 8-bits: Port C Alternate Function Low */ +#define Z16F_GPIOC_OC _HX32(ffffe126) /* 8-bits: Port C Output Control */ +#define Z16F_GPIOC_PUE _HX32(ffffe127) /* 8-bits: Port C Pull-Up Enable */ +#define Z16F_GPIOC_SMRE _HX32(ffffe128) /* 8-bits: Port C Stop Mode Recovery En */ +#define Z16F_GPIOC_IMUX _HX32(ffffe12e) /* 8-bits: Port C IRQ Mux */ + +#define Z16F_GPIOD_IN _HX32(ffffe130) /* 8-bits: Port D Input Data */ +#define Z16F_GPIOD_OUT _HX32(ffffe131) /* 8-bits: Port D Output Data */ +#define Z16F_GPIOD_DD _HX32(ffffe132) /* 8-bits: Port D Data Direction */ +#define Z16F_GPIOD_HDE _HX32(ffffe133) /* 8-bits: Port D High Drive Enable */ +#define Z16F_GPIOD_AF _HX32(ffffe134) /* 16-bits: Port D Alternate Function */ +# define Z16F_GPIOD_AFH _HX32(ffffe134) /* 8-bits: Port D Alternate Function High */ +# define Z16F_GPIOD_AFL _HX32(ffffe135) /* 8-bits: Port D Alternate Function Low */ +#define Z16F_GPIOD_OC _HX32(ffffe136) /* 8-bits: Port D Output Control */ +#define Z16F_GPIOD_PUE _HX32(ffffe137) /* 8-bits: Port D Pull-Up Enable */ +#define Z16F_GPIOD_SMRE _HX32(ffffe138) /* 8-bits: Port D Stop Mode Recovery En */ + +#define Z16F_GPIOE_IN _HX32(ffffe140) /* 8-bits: Port E Input Data */ +#define Z16F_GPIOE_OUT _HX32(ffffe141) /* 8-bits: Port E Output Data */ +#define Z16F_GPIOE_DD _HX32(ffffe142) /* 8-bits: Port E Data Direction */ +#define Z16F_GPIOE_HDE _HX32(ffffe143) /* 8-bits: Port E High Drive Enable */ +#define Z16F_GPIOE_OC _HX32(ffffe146) /* 8-bits: Port E Output Control */ +#define Z16F_GPIOE_PUE _HX32(ffffe147) /* 8-bits: Port E Pull-Up Enable */ +#define Z16F_GPIOE_SMRE _HX32(ffffe148) /* 8-bits: Port E Stop Mode Recovery En */ + +#define Z16F_GPIOF_IN _HX32(ffffe150) /* 8-bits: Port F Input Data */ +#define Z16F_GPIOF_OUT _HX32(ffffe151) /* 8-bits: Port F Output Data */ +#define Z16F_GPIOF_DD _HX32(ffffe152) /* 8-bits: Port F Data Direction */ +#define Z16F_GPIOF_HDE _HX32(ffffe153) /* 8-bits: Port F High Drive Enable */ +#define Z16F_GPIOF_AFL _HX32(ffffe155) /* 8-bits: Port F Alternate Function Low */ +#define Z16F_GPIOF_OC _HX32(ffffe156) /* 8-bits: Port F Output Control */ +#define Z16F_GPIOF_PUE _HX32(ffffe157) /* 8-bits: Port F Pull-Up Enable */ +#define Z16F_GPIOF_SMRE _HX32(ffffe158) /* 8-bits: Port F Stop Mode Recovery En */ + +#define Z16F_GPIOG_IN _HX32(ffffe160) /* 8-bits: Port G Input Data */ +#define Z16F_GPIOG_OUT _HX32(ffffe161) /* 8-bits: Port G Output Data */ +#define Z16F_GPIOG_DD _HX32(ffffe162) /* 8-bits: Port G Data Direction */ +#define Z16F_GPIOG_HDE _HX32(ffffe163) /* 8-bits: Port G High Drive Enable */ +#define Z16F_GPIOG_AFL _HX32(ffffe165) /* 8-bits: Port G Alternate Function Low */ +#define Z16F_GPIOG_OC _HX32(ffffe166) /* 8-bits: Port G Output Control */ +#define Z16F_GPIOG_PUE _HX32(ffffe167) /* 8-bits: Port G Pull-Up Enable */ +#define Z16F_GPIOG_SMRE _HX32(ffffe168) /* 8-bits: Port G Stop Mode Recovery En */ + +#define Z16F_GPIOH_IN _HX32(ffffe170) /* 8-bits: Port H Input Data */ +#define Z16F_GPIOH_OUT _HX32(ffffe171) /* 8-bits: Port H Output Data */ +#define Z16F_GPIOH_DD _HX32(ffffe172) /* 8-bits: Port H Data Direction */ +#define Z16F_GPIOH_HDE _HX32(ffffe173) /* 8-bits: Port H High Drive Enable */ +#define Z16F_GPIOH_AF _HX32(ffffe174) /* 16-bits: Port H Alternate Function */ +# define Z16F_GPIOH_AFH _HX32(ffffe174) /* 8-bits: Port H Alternate Function High */ +# define Z16F_GPIOH_AFL _HX32(ffffe175) /* 8-bits: Port H Alternate Function LOw */ +#define Z16F_GPIOH_OC _HX32(ffffe176) /* 8-bits: Port H Output Control */ +#define Z16F_GPIOH_PUE _HX32(ffffe177) /* 8-bits: Port H Pull-Up Enable */ +#define Z16F_GPIOH_SMRE _HX32(ffffe178) /* 8-bits: Port H Stop Mode Recovery En */ #ifdef Z16F_HAVE_GPIO_PORTJ -# define Z16F_GPIOJ_IN _HX32(ffffe180) /* 8-bits: Port J Input Data */ -# define Z16F_GPIOJ_OUT _HX32(ffffe181) /* 8-bits: Port J Output Data */ -# define Z16F_GPIOJ_DD _HX32(ffffe182) /* 8-bits: Port J Data Direction */ -# define Z16F_GPIOJ_HDE _HX32(ffffe183) /* 8-bits: Port J High Drive Enable */ -# define Z16F_GPIOJ_OC _HX32(ffffe186) /* 8-bits: Port J Output Control */ -# define Z16F_GPIOJ_PUE _HX32(ffffe187) /* 8-bits: Port J Pull-Up Enable */ -# define Z16F_GPIOJ_SMRE _HX32(ffffe188) /* 8-bits: Port J Stop Mode Recovery En */ +# define Z16F_GPIOJ_IN _HX32(ffffe180) /* 8-bits: Port J Input Data */ +# define Z16F_GPIOJ_OUT _HX32(ffffe181) /* 8-bits: Port J Output Data */ +# define Z16F_GPIOJ_DD _HX32(ffffe182) /* 8-bits: Port J Data Direction */ +# define Z16F_GPIOJ_HDE _HX32(ffffe183) /* 8-bits: Port J High Drive Enable */ +# define Z16F_GPIOJ_OC _HX32(ffffe186) /* 8-bits: Port J Output Control */ +# define Z16F_GPIOJ_PUE _HX32(ffffe187) /* 8-bits: Port J Pull-Up Enable */ +# define Z16F_GPIOJ_SMRE _HX32(ffffe188) /* 8-bits: Port J Stop Mode Recovery En */ #endif #ifdef Z16F_HAVE_GPIO_PORTK -# define Z16F_GPIOK_IN _HX32(ffffe190) /* 8-bits: Port K Input Data */ -# define Z16F_GPIOK_OUT _HX32(ffffe191) /* 8-bits: Port K Output Data */ -# define Z16F_GPIOK_DD _HX32(ffffe192) /* 8-bits: Port K Data Direction */ -# define Z16F_GPIOK_HDE _HX32(ffffe193) /* 8-bits: Port K High Drive Enable */ -# define Z16F_GPIOK_AFL _HX32(ffffe195) /* 8-bits: Port K Alternate Function Low */ -# define Z16F_GPIOK_OC _HX32(ffffe196) /* 8-bits: Port K Output Control */ -# define Z16F_GPIOK_PUE _HX32(ffffe197) /* 8-bits: Port K Pull-Up Enable */ -# define Z16F_GPIOK_SMRE _HX32(ffffe198) /* 8-bits: Port K Stop Mode Recovery En */ +# define Z16F_GPIOK_IN _HX32(ffffe190) /* 8-bits: Port K Input Data */ +# define Z16F_GPIOK_OUT _HX32(ffffe191) /* 8-bits: Port K Output Data */ +# define Z16F_GPIOK_DD _HX32(ffffe192) /* 8-bits: Port K Data Direction */ +# define Z16F_GPIOK_HDE _HX32(ffffe193) /* 8-bits: Port K High Drive Enable */ +# define Z16F_GPIOK_AFL _HX32(ffffe195) /* 8-bits: Port K Alternate Function Low */ +# define Z16F_GPIOK_OC _HX32(ffffe196) /* 8-bits: Port K Output Control */ +# define Z16F_GPIOK_PUE _HX32(ffffe197) /* 8-bits: Port K Pull-Up Enable */ +# define Z16F_GPIOK_SMRE _HX32(ffffe198) /* 8-bits: Port K Stop Mode Recovery En */ #endif /* UART Register Offsets *************************************************************/ -#define Z16F_UART_TXD _HX8(00) /* 8-bits: UART Transmit Data */ -#define Z16F_UART_RXD _HX8(00) /* 8-bits: UART Receive Data */ -#define Z16F_UART_STAT0 _HX8(01) /* 8-bits: UART Status 0 */ -#define Z16F_UART_CTL _HX8(02) /* 16-bits: UART Control */ -# define Z16F_UART_CTL0 _HX8(02) /* 8-bits: UART Control 0 */ -# define Z16F_UART_CTL1 _HX8(03) /* 8-bits: UART COntrol 1 */ -#define Z16F_UART_MDSTAT _HX8(04) /* 8-bits: UART Mode Select & Status */ -#define Z16F_UART_ADDR _HX8(05) /* 8-bits: UART Address Compare */ -#define Z16F_UART_BR _HX8(06) /* 16-bits: UART Baud Rate */ -# define Z16F_UART_BRH _HX8(06) /* 8-bits: UART Baud Rate High Byte */ -# define Z16F_UART_BRL _HX8(07) /* 8-bits: UART Baud Rate Low Byte */ - -#define Z16F_UART0_BASE _HX32(ffffe200) /* UART0 Register Base Address */ -#define Z16F_UART1_BASE _HX32(ffffe210) /* UART1 Register Base Address */ +#define Z16F_UART_TXD _HX8(00) /* 8-bits: UART Transmit Data */ +#define Z16F_UART_RXD _HX8(00) /* 8-bits: UART Receive Data */ +#define Z16F_UART_STAT0 _HX8(01) /* 8-bits: UART Status 0 */ +#define Z16F_UART_CTL _HX8(02) /* 16-bits: UART Control */ +# define Z16F_UART_CTL0 _HX8(02) /* 8-bits: UART Control 0 */ +# define Z16F_UART_CTL1 _HX8(03) /* 8-bits: UART COntrol 1 */ +#define Z16F_UART_MDSTAT _HX8(04) /* 8-bits: UART Mode Select & Status */ +#define Z16F_UART_ADDR _HX8(05) /* 8-bits: UART Address Compare */ +#define Z16F_UART_BR _HX8(06) /* 16-bits: UART Baud Rate */ +# define Z16F_UART_BRH _HX8(06) /* 8-bits: UART Baud Rate High Byte */ +# define Z16F_UART_BRL _HX8(07) /* 8-bits: UART Baud Rate Low Byte */ + +#define Z16F_UART0_BASE _HX32(ffffe200) /* UART0 Register Base Address */ +#define Z16F_UART1_BASE _HX32(ffffe210) /* UART1 Register Base Address */ /* UART0/1 Registers ****************************************************************/ -#define Z16F_UART0_TXD _HX32(ffffe200) /* 8-bits: UART0 Transmit Data */ -#define Z16F_UART0_RXD _HX32(ffffe200) /* 8-bits: UART0 Receive Data */ -#define Z16F_UART0_STAT0 _HX32(ffffe201) /* 8-bits: UART0 Status 0 */ -#define Z16F_UART0_CTL _HX32(ffffe202) /* 16-bits: UART0 Control */ -# define Z16F_UART0_CTL0 _HX32(ffffe202) /* 8-bits: UART0 Control 0 */ -# define Z16F_UART0_CTL1 _HX32(ffffe203) /* 8-bits: UART0 COntrol 1 */ -#define Z16F_UART0_MDSTAT _HX32(ffffe204) /* 8-bits: UART0 Mode Select & Status */ -#define Z16F_UART0_ADDR _HX32(ffffe205) /* 8-bits: UART0 Address Compare */ -#define Z16F_UART0_BR _HX32(ffffe206) /* 16-bits: UART0 Baud Rate */ -# define Z16F_UART0_BRH _HX32(ffffe206) /* 8-bits: UART0 Baud Rate High Byte */ -# define Z16F_UART0_BRL _HX32(ffffe207) /* 8-bits: UART0 Baud Rate Low Byte */ - -#define Z16F_UART1_TXD _HX32(ffffe210) /* 8-bits: UART1 Transmit Data */ -#define Z16F_UART1_RXD _HX32(ffffe210) /* 8-bits: UART1 Receive Data */ -#define Z16F_UART1_STAT0 _HX32(ffffe211) /* 8-bits: UART1 Status 0 */ -#define Z16F_UART1_CTL _HX32(ffffe212) /* 16-bits: UART1 Control */ -# define Z16F_UART1_CTL0 _HX32(ffffe212) /* 8-bits: UART1 Control 0 */ -# define Z16F_UART1_CTL1 _HX32(ffffe213) /* 8-bits: UART1 COntrol 1 */ -#define Z16F_UART1_MDSTAT _HX32(ffffe214) /* 8-bits: UART1 Mode Select & Status */ -#define Z16F_UART1_ADDR _HX32(ffffe215) /* 8-bits: UART1 Address Compare */ -#define Z16F_UART1_BR _HX32(ffffe216) /* 16-bits: UART1 Baud Rate */ -# define Z16F_UART1_BRH _HX32(ffffe216) /* 8-bits: UART1 Baud Rate High Byte */ -# define Z16F_UART1_BRL _HX32(ffffe217) /* 8-bits: UART1 Baud Rate Low Byte */ +#define Z16F_UART0_TXD _HX32(ffffe200) /* 8-bits: UART0 Transmit Data */ +#define Z16F_UART0_RXD _HX32(ffffe200) /* 8-bits: UART0 Receive Data */ +#define Z16F_UART0_STAT0 _HX32(ffffe201) /* 8-bits: UART0 Status 0 */ +#define Z16F_UART0_CTL _HX32(ffffe202) /* 16-bits: UART0 Control */ +# define Z16F_UART0_CTL0 _HX32(ffffe202) /* 8-bits: UART0 Control 0 */ +# define Z16F_UART0_CTL1 _HX32(ffffe203) /* 8-bits: UART0 COntrol 1 */ +#define Z16F_UART0_MDSTAT _HX32(ffffe204) /* 8-bits: UART0 Mode Select & Status */ +#define Z16F_UART0_ADDR _HX32(ffffe205) /* 8-bits: UART0 Address Compare */ +#define Z16F_UART0_BR _HX32(ffffe206) /* 16-bits: UART0 Baud Rate */ +# define Z16F_UART0_BRH _HX32(ffffe206) /* 8-bits: UART0 Baud Rate High Byte */ +# define Z16F_UART0_BRL _HX32(ffffe207) /* 8-bits: UART0 Baud Rate Low Byte */ + +#define Z16F_UART1_TXD _HX32(ffffe210) /* 8-bits: UART1 Transmit Data */ +#define Z16F_UART1_RXD _HX32(ffffe210) /* 8-bits: UART1 Receive Data */ +#define Z16F_UART1_STAT0 _HX32(ffffe211) /* 8-bits: UART1 Status 0 */ +#define Z16F_UART1_CTL _HX32(ffffe212) /* 16-bits: UART1 Control */ +# define Z16F_UART1_CTL0 _HX32(ffffe212) /* 8-bits: UART1 Control 0 */ +# define Z16F_UART1_CTL1 _HX32(ffffe213) /* 8-bits: UART1 COntrol 1 */ +#define Z16F_UART1_MDSTAT _HX32(ffffe214) /* 8-bits: UART1 Mode Select & Status */ +#define Z16F_UART1_ADDR _HX32(ffffe215) /* 8-bits: UART1 Address Compare */ +#define Z16F_UART1_BR _HX32(ffffe216) /* 16-bits: UART1 Baud Rate */ +# define Z16F_UART1_BRH _HX32(ffffe216) /* 8-bits: UART1 Baud Rate High Byte */ +# define Z16F_UART1_BRL _HX32(ffffe217) /* 8-bits: UART1 Baud Rate Low Byte */ /* UART0/1 Status 0 Register Bit Definitions ****************************************/ -#define Z16F_UARTSTAT0_RDA _HX8(80) /* Bit 7: Receive Data Available */ -#define Z16F_UARTSTAT0_PE _HX8(40) /* Bit 6: Parity Error */ -#define Z16F_UARTSTAT0_OE _HX8(20) /* Bit 5: Overrun Error */ -#define Z16F_UARTSTAT0_FE _HX8(10) /* Bit 4: Framing Error */ -#define Z16F_UARTSTAT0_BRKD _HX8(08) /* Bit 3: Break Detect */ -#define Z16F_UARTSTAT0_TDRE _HX8(04) /* Bit 2: Transmitter Data Register Empty */ -#define Z16F_UARTSTAT0_TXE _HX8(02) /* Bit 1: Transmitter Empty */ -#define Z16F_UARTSTAT0_CTS _HX8(01) /* Bit 0: Clear To Send */ +#define Z16F_UARTSTAT0_RDA _HX8(80) /* Bit 7: Receive Data Available */ +#define Z16F_UARTSTAT0_PE _HX8(40) /* Bit 6: Parity Error */ +#define Z16F_UARTSTAT0_OE _HX8(20) /* Bit 5: Overrun Error */ +#define Z16F_UARTSTAT0_FE _HX8(10) /* Bit 4: Framing Error */ +#define Z16F_UARTSTAT0_BRKD _HX8(08) /* Bit 3: Break Detect */ +#define Z16F_UARTSTAT0_TDRE _HX8(04) /* Bit 2: Transmitter Data Register Empty */ +#define Z16F_UARTSTAT0_TXE _HX8(02) /* Bit 1: Transmitter Empty */ +#define Z16F_UARTSTAT0_CTS _HX8(01) /* Bit 0: Clear To Send */ /* UART0/1 Control 0/1 Register Bit Definitions *************************************/ -#define Z16F_UARTCTL0_TEN _HX8(80) /* Bit 7: Transmit Enable */ -#define Z16F_UARTCTL0_REN _HX8(40) /* Bit 6: Receive Enable */ -#define Z16F_UARTCTL0_CTSE _HX8(20) /* Bit 5: CTS Enable */ -#define Z16F_UARTCTL0_PEN _HX8(10) /* Bit 4: Parity Enable */ -#define Z16F_UARTCTL0_PSEL _HX8(08) /* Bit 3: Odd Parity Select */ -#define Z16F_UARTCTL0_SBRK _HX8(04) /* Bit 2: Send Break */ -#define Z16F_UARTCTL0_STOP _HX8(02) /* Bit 1: Stop Bit Select */ -#define Z16F_UARTCTL0_LBEN _HX8(01) /* Bit 0: Loopback Enable */ - -#define Z16F_UARTCTL1_MPMD1 _HX8(80) /* Bit 7: Multiprocessor Mode (bit1) */ -#define Z16F_UARTCTL1_MPEN _HX8(40) /* Bit 6: Multiprocessor Enable */ -#define Z16F_UARTCTL1_MPMD0 _HX8(20) /* Bit 5: Multiprocessor Mode (bit0) */ -#define Z16F_UARTCTL1_MPBT _HX8(10) /* Bit 4: Multiprocessor Bit Transmit */ -#define Z16F_UARTCTL1_DEPOL _HX8(08) /* Bit 3: Driver Enable Polarity */ -#define Z16F_UARTCTL1_BRGCTL _HX8(04) /* Bit 2: Baud Rate Generator Control */ -#define Z16F_UARTCTL1_RDAIRQ _HX8(02) /* Bit 1: Receive Data Interrupt Enable */ -#define Z16F_UARTCTL1_IREN _HX8(01) /* Bit 0: Infrared Encoder/Decoder Eanble */ +#define Z16F_UARTCTL0_TEN _HX8(80) /* Bit 7: Transmit Enable */ +#define Z16F_UARTCTL0_REN _HX8(40) /* Bit 6: Receive Enable */ +#define Z16F_UARTCTL0_CTSE _HX8(20) /* Bit 5: CTS Enable */ +#define Z16F_UARTCTL0_PEN _HX8(10) /* Bit 4: Parity Enable */ +#define Z16F_UARTCTL0_PSEL _HX8(08) /* Bit 3: Odd Parity Select */ +#define Z16F_UARTCTL0_SBRK _HX8(04) /* Bit 2: Send Break */ +#define Z16F_UARTCTL0_STOP _HX8(02) /* Bit 1: Stop Bit Select */ +#define Z16F_UARTCTL0_LBEN _HX8(01) /* Bit 0: Loopback Enable */ + +#define Z16F_UARTCTL1_MPMD1 _HX8(80) /* Bit 7: Multiprocessor Mode (bit1) */ +#define Z16F_UARTCTL1_MPEN _HX8(40) /* Bit 6: Multiprocessor Enable */ +#define Z16F_UARTCTL1_MPMD0 _HX8(20) /* Bit 5: Multiprocessor Mode (bit0) */ +#define Z16F_UARTCTL1_MPBT _HX8(10) /* Bit 4: Multiprocessor Bit Transmit */ +#define Z16F_UARTCTL1_DEPOL _HX8(08) /* Bit 3: Driver Enable Polarity */ +#define Z16F_UARTCTL1_BRGCTL _HX8(04) /* Bit 2: Baud Rate Generator Control */ +#define Z16F_UARTCTL1_RDAIRQ _HX8(02) /* Bit 1: Receive Data Interrupt Enable */ +#define Z16F_UARTCTL1_IREN _HX8(01) /* Bit 0: Infrared Encoder/Decoder Enable */ /* UART0/1 Mode Status/Select Register Bit Definitions ******************************/ -#define Z16F_UARTMDSEL_NORMAL _HX8(00) /* Bits 5-7=0: Multiprocessor and Normal Mode */ -#define Z16F_UARTMDSEL_FILTER _HX8(20) /* Bits 5-7=1: Noise Filter Control/Status */ -#define Z16F_UARTMDSEL_LINP _HX8(40) /* Bits 5-7=2: LIN protocol Contol/Status */ -#define Z16F_UARTMDSEL_HWREV _HX8(e0) /* Bits 5-7=7: LIN-UART Hardware Revision */ - /* Bits 0-4: Mode dependent status */ +#define Z16F_UARTMDSEL_NORMAL _HX8(00) /* Bits 5-7=0: Multiprocessor and Normal Mode */ +#define Z16F_UARTMDSEL_FILTER _HX8(20) /* Bits 5-7=1: Noise Filter Control/Status */ +#define Z16F_UARTMDSEL_LINP _HX8(40) /* Bits 5-7=2: LIN protocol Contol/Status */ +#define Z16F_UARTMDSEL_HWREV _HX8(e0) /* Bits 5-7=7: LIN-UART Hardware Revision */ + /* Bits 0-4: Mode dependent status */ /* ESPI registers *******************************************************************/ -#define Z16F_ESPI_DATA _HX32(ffffe260) /* 8-bit: ESPI Data */ -#define Z16F_ESPI_DCR _HX32(ffffe261) /* 8-bit: ESPI Transmit Data Command */ -#define Z16F_ESPI_CTL _HX32(ffffe262) /* 8-bit: ESPI Control */ -#define Z16F_ESPI_MODE _HX32(ffffe263) /* 8-bit: ESPI Mode */ -#define Z16F_ESPI_STAT _HX32(ffffe264) /* 8-bit: ESPI Status */ -#define Z16F_ESPI_STATE _HX32(ffffe265) /* 8-bit: ESPI State */ -#define Z16F_ESPI_BR _HX32(ffffe266) /* 16-bit: ESPI Baud Rate High Byte */ -# define Z16F_ESPI_BRH _HX32(ffffe266) /* 8-bit: ESPI Baud Rate High Byte */ -# define Z16F_ESPI_BRL _HX32(ffffe267) /* 8-bit: ESPI Baud Rate Low Byte */ +#define Z16F_ESPI_DATA _HX32(ffffe260) /* 8-bit: ESPI Data */ +#define Z16F_ESPI_DCR _HX32(ffffe261) /* 8-bit: ESPI Transmit Data Command */ +#define Z16F_ESPI_CTL _HX32(ffffe262) /* 8-bit: ESPI Control */ +#define Z16F_ESPI_MODE _HX32(ffffe263) /* 8-bit: ESPI Mode */ +#define Z16F_ESPI_STAT _HX32(ffffe264) /* 8-bit: ESPI Status */ +#define Z16F_ESPI_STATE _HX32(ffffe265) /* 8-bit: ESPI State */ +#define Z16F_ESPI_BR _HX32(ffffe266) /* 16-bit: ESPI Baud Rate High Byte */ +# define Z16F_ESPI_BRH _HX32(ffffe266) /* 8-bit: ESPI Baud Rate High Byte */ +# define Z16F_ESPI_BRL _HX32(ffffe267) /* 8-bit: ESPI Baud Rate Low Byte */ /* ESPI register bit definitions ****************************************************/ -#define Z16F_ESPI_DCR_SSV _HX8(01) /* Bit 0: Slave Select Value */ -#define Z16F_ESPI_DCR_TEOF _HX8(02) /* Bit 1: Transmit End of Frame */ - -#define Z16F_ESPI_CTL_ESPIEN0 _HX8(01) /* Bit 0: ESPI Enable and Direction Control */ -#define Z16F_ESPI_CTL_MMEN _HX8(02) /* Bit 1: ESPI Master Mode Enable */ -#define Z16F_ESPI_CTL_WOR _HX8(04) /* Bit 2: Wire-OR (Open-Drain) Mode Enabled */ -#define Z16F_ESPI_CTL_CLKPOL _HX8(08) /* Bit 3: Clock Polarity */ -#define Z16F_ESPI_CTL_PHASE _HX8(10) /* Bit 4: Phase Select */ -#define Z16F_ESPI_CTL_BRGCTL _HX8(20) /* Bit 5: Baud Rate Generator Control */ -#define Z16F_ESPI_CTL_ESPIEN1 _HX8(40) /* Bit 6: ESPI Enable and Direction Control */ -#define Z16F_ESPI_CTL_DIRQE _HX8(80) /* Bit 7: Data Interrupt Request Enable */ - -#define Z16F_ESPI_MODE_SSPO _HX8(01) /* Bit 0: Slave Select Polarity */ -#define Z16F_ESPI_MODE_SSIO _HX8(02) /* Bit 1: Slave Select I/O */ -#define Z16F_ESPI_MODE_NUMBITS_SHIFT (2) /* Bits 2-4: Number of Data Bits Per Character */ +#define Z16F_ESPI_DCR_SSV _HX8(01) /* Bit 0: Slave Select Value */ +#define Z16F_ESPI_DCR_TEOF _HX8(02) /* Bit 1: Transmit End of Frame */ + +#define Z16F_ESPI_CTL_ESPIEN0 _HX8(01) /* Bit 0: ESPI Enable and Direction Control */ +#define Z16F_ESPI_CTL_MMEN _HX8(02) /* Bit 1: ESPI Master Mode Enable */ +#define Z16F_ESPI_CTL_WOR _HX8(04) /* Bit 2: Wire-OR (Open-Drain) Mode Enabled */ +#define Z16F_ESPI_CTL_CLKPOL _HX8(08) /* Bit 3: Clock Polarity */ +#define Z16F_ESPI_CTL_PHASE _HX8(10) /* Bit 4: Phase Select */ +#define Z16F_ESPI_CTL_BRGCTL _HX8(20) /* Bit 5: Baud Rate Generator Control */ +#define Z16F_ESPI_CTL_ESPIEN1 _HX8(40) /* Bit 6: ESPI Enable and Direction Control */ +#define Z16F_ESPI_CTL_DIRQE _HX8(80) /* Bit 7: Data Interrupt Request Enable */ + +#define Z16F_ESPI_MODE_SSPO _HX8(01) /* Bit 0: Slave Select Polarity */ +#define Z16F_ESPI_MODE_SSIO _HX8(02) /* Bit 1: Slave Select I/O */ +#define Z16F_ESPI_MODE_NUMBITS_SHIFT (2) /* Bits 2-4: Number of Data Bits Per Character */ #define Z16F_ESPI_MODE_NUMBITS_MASK (7 << Z16F_ESPI_MODE_NUMBITS_SHIFT) # define Z16F_ESPI_MODE_NUMBITS_8BITS (0 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 8 bits */ # define Z16F_ESPI_MODE_NUMBITS_1BIT (1 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 1 bit */ @@ -498,22 +498,22 @@ # define Z16F_ESPI_MODE_NUMBITS_5BITS (5 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 5 bits */ # define Z16F_ESPI_MODE_NUMBITS_6BITS (6 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 6 bits */ # define Z16F_ESPI_MODE_NUMBITS_7BITS (7 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 7 bits */ -#define Z16F_ESPI_MODE_SSMD_SHIFT (5) /* Bits 5-7: SLAVE SELECT Mode */ +#define Z16F_ESPI_MODE_SSMD_SHIFT (5) /* Bits 5-7: SLAVE SELECT Mode */ #define Z16F_ESPI_MODE_SSMD_MASK (7 << Z16F_ESPI_MODE_SSMD_SHIFT) # define Z16F_ESPI_MODE_SSMD_SPI (0 << Z16F_ESPI_MODE_SSMD_SHIFT) /* SPI mode */ # define Z16F_ESPI_MODE_SSMD_LPBK (1 << Z16F_ESPI_MODE_SSMD_SHIFT) /* LOOPBACK Mode */ # define Z16F_ESPI_MODE_SSMD_I2S (2 << Z16F_ESPI_MODE_SSMD_SHIFT) /* I2S Mode */ -#define Z16F_ESPI_STAT_SLAS _HX8(01) /* Bit 0: Slave Select */ -#define Z16F_ESPI_STAT_TFST _HX8(02) /* Bit 1: Transfer Status */ -#define Z16F_ESPI_STAT_RDRF _HX8(04) /* Bit 2: Receive Data Register Full */ -#define Z16F_ESPI_STAT_ROVR _HX8(08) /* Bit 3: Receive Overrun */ -#define Z16F_ESPI_STAT_ABT _HX8(10) /* Bit 4: Slave mode transaction abort */ -#define Z16F_ESPI_STAT_COL _HX8(20) /* Bit 5: Collision */ -#define Z16F_ESPI_STAT_TUND _HX8(40) /* Bit 6: Transmit Underrun */ -#define Z16F_ESPI_STAT_TDRE _HX8(80) /* Bit 7: Transmit Data Register Empty */ +#define Z16F_ESPI_STAT_SLAS _HX8(01) /* Bit 0: Slave Select */ +#define Z16F_ESPI_STAT_TFST _HX8(02) /* Bit 1: Transfer Status */ +#define Z16F_ESPI_STAT_RDRF _HX8(04) /* Bit 2: Receive Data Register Full */ +#define Z16F_ESPI_STAT_ROVR _HX8(08) /* Bit 3: Receive Overrun */ +#define Z16F_ESPI_STAT_ABT _HX8(10) /* Bit 4: Slave mode transaction abort */ +#define Z16F_ESPI_STAT_COL _HX8(20) /* Bit 5: Collision */ +#define Z16F_ESPI_STAT_TUND _HX8(40) /* Bit 6: Transmit Underrun */ +#define Z16F_ESPI_STAT_TDRE _HX8(80) /* Bit 7: Transmit Data Register Empty */ -#define Z16F_ESPI_STATE_SHIFT (0) /* Bits 0-5: ESPI State Machine */ +#define Z16F_ESPI_STATE_SHIFT (0) /* Bits 0-5: ESPI State Machine */ #define Z16F_ESPI_STATE_MASK (0x3f << Z16F_ESPI_STATE_SHIFT) # define Z16F_ESPI_STATE_IDLE (0x00 << Z16F_ESPI_STATE_SHIFT) /* Idle */ # define Z16F_ESPI_STATE_SWAIT (0x01 << Z16F_ESPI_STATE_SHIFT) /* Slave Wait For SCK */ @@ -538,105 +538,105 @@ # define Z16F_ESPI_STATE_B1XMT (0x23 << Z16F_ESPI_STATE_SHIFT) /* Bit 1 Transmit */ # define Z16F_ESPI_STATE_B0RCV (0x20 << Z16F_ESPI_STATE_SHIFT) /* Bit 0 Receive */ # define Z16F_ESPI_STATE_B0XMT (0x21 << Z16F_ESPI_STATE_SHIFT) /* Bit 0 Transmit */ -#define Z16F_ESPI_STATE_SDI _HX8(40) /* Bit 6: Serial Data Input */ -#define Z16F_ESPI_STATE_SCKI _HX8(80) /* Bit 7: Serial Clock Input */ +#define Z16F_ESPI_STATE_SDI _HX8(40) /* Bit 6: Serial Data Input */ +#define Z16F_ESPI_STATE_SCKI _HX8(80) /* Bit 7: Serial Clock Input */ /* Timer0/1/2 registers *************************************************************/ -#define Z16F_TIMER0_HL _HX32(ffffe300) /* 16-bit: Timer 0 */ -# define Z16F_TIMER0_H _HX32(ffffe300) /* 8-bit: Timer 0 High Byte */ -# define Z16F_TIMER0_L _HX32(ffffe301) /* 8-bit: Timer 0 Low Byte */ -#define Z16F_TIMER0_R _HX32(ffffe302) /* 16-bit: Timer 0 Reload */ -# define Z16F_TIMER0_RH _HX32(ffffe302) /* 8-bit: Timer 0 Reload High Byte */ -# define Z16F_TIMER0_RL _HX32(ffffe303) /* 8-bit: Timer 0 Reload Low Byte */ -#define Z16F_TIMER0_PWM _HX32(ffffe304) /* 16-bit: Timer 0 PWM */ -# define Z16F_TIMER0_PWMH _HX32(ffffe304) /* 8-bit: Timer 0 PWM High Byte */ -# define Z16F_TIMER0_PWML _HX32(ffffe305) /* 8-bit: Timer 0 PWM Low Byte */ -#define Z16F_TIMER0_CTL _HX32(ffffe306) /* 16-bit: Timer 0 Control */ -# define Z16F_TIMER0_CTL0 _HX32(ffffe306) /* 8-bit: Timer 0 Control 0 */ -# define Z16F_TIMER0_CTL1 _HX32(ffffe307) /* 8-bit: Timer 0 Control 1 */ - -#define Z16F_TIMER1_HL _HX32(ffffe310) /* 16-bit: Timer 1 */ -# define Z16F_TIMER1_H _HX32(ffffe310) /* 8-bit: Timer 1 High Byte */ -# define Z16F_TIMER1_L _HX32(ffffe311) /* 8-bit: Timer 1 Low Byte */ -#define Z16F_TIMER1_R _HX32(ffffe312) /* 16-bit: Timer 1 Reload */ -# define Z16F_TIMER1_RH _HX32(ffffe312) /* 8-bit: Timer 1 Reload High Byte */ -# define Z16F_TIMER1_RL _HX32(ffffe313) /* 8-bit: Timer 1 Reload Low Byte */ -#define Z16F_TIMER1_PWM _HX32(ffffe314) /* 16-bit: Timer 1 PWM */ -# define Z16F_TIMER1_PWMH _HX32(ffffe314) /* 8-bit: Timer 1 PWM High Byte */ -# define Z16F_TIMER1_PWML _HX32(ffffe315) /* 8-bit: Timer 1 PWM Low Byte */ -#define Z16F_TIMER1_CTL _HX32(ffffe316) /* 16-bit: Timer 1 Control */ -# define Z16F_TIMER1_CTL0 _HX32(ffffe316) /* 8-bit: Timer 1 Control 0 */ -# define Z16F_TIMER1_CTL1 _HX32(ffffe317) /* 8-bit: Timer 1 Control 1 */ - -#define Z16F_TIMER2_HL _HX32(ffffe320) /* 16-bit: Timer 2 */ -# define Z16F_TIMER2_H _HX32(ffffe320) /* 8-bit: Timer 2 High Byte */ -# define Z16F_TIMER2_L _HX32(ffffe321) /* 8-bit: Timer 2 Low Byte */ -#define Z16F_TIMER2_R _HX32(ffffe322) /* 16-bit: Timer 2 Reload */ -# define Z16F_TIMER2_RH _HX32(ffffe322) /* 8-bit: Timer 2 Reload High Byte */ -# define Z16F_TIMER2_RL _HX32(ffffe323) /* 8-bit: Timer 2 Reload Low Byte */ -#define Z16F_TIMER2_PWM _HX32(ffffe324) /* 16-bit: Timer 2 PWM */ -# define Z16F_TIMER2_PWMH _HX32(ffffe324) /* 8-bit: Timer 2 PWM High Byte */ -# define Z16F_TIMER2_PWML _HX32(ffffe325) /* 8-bit: Timer 2 PWM Low Byte */ -#define Z16F_TIMER2_CTL _HX32(ffffe326) /* 16-bit: Timer 2 Control */ -# define Z16F_TIMER2_CTL0 _HX32(ffffe326) /* 8-bit: Timer 2 Control 0 */ -# define Z16F_TIMER2_CTL1 _HX32(ffffe327) /* 8-bit: Timer 2 Control 1 */ +#define Z16F_TIMER0_HL _HX32(ffffe300) /* 16-bit: Timer 0 */ +# define Z16F_TIMER0_H _HX32(ffffe300) /* 8-bit: Timer 0 High Byte */ +# define Z16F_TIMER0_L _HX32(ffffe301) /* 8-bit: Timer 0 Low Byte */ +#define Z16F_TIMER0_R _HX32(ffffe302) /* 16-bit: Timer 0 Reload */ +# define Z16F_TIMER0_RH _HX32(ffffe302) /* 8-bit: Timer 0 Reload High Byte */ +# define Z16F_TIMER0_RL _HX32(ffffe303) /* 8-bit: Timer 0 Reload Low Byte */ +#define Z16F_TIMER0_PWM _HX32(ffffe304) /* 16-bit: Timer 0 PWM */ +# define Z16F_TIMER0_PWMH _HX32(ffffe304) /* 8-bit: Timer 0 PWM High Byte */ +# define Z16F_TIMER0_PWML _HX32(ffffe305) /* 8-bit: Timer 0 PWM Low Byte */ +#define Z16F_TIMER0_CTL _HX32(ffffe306) /* 16-bit: Timer 0 Control */ +# define Z16F_TIMER0_CTL0 _HX32(ffffe306) /* 8-bit: Timer 0 Control 0 */ +# define Z16F_TIMER0_CTL1 _HX32(ffffe307) /* 8-bit: Timer 0 Control 1 */ + +#define Z16F_TIMER1_HL _HX32(ffffe310) /* 16-bit: Timer 1 */ +# define Z16F_TIMER1_H _HX32(ffffe310) /* 8-bit: Timer 1 High Byte */ +# define Z16F_TIMER1_L _HX32(ffffe311) /* 8-bit: Timer 1 Low Byte */ +#define Z16F_TIMER1_R _HX32(ffffe312) /* 16-bit: Timer 1 Reload */ +# define Z16F_TIMER1_RH _HX32(ffffe312) /* 8-bit: Timer 1 Reload High Byte */ +# define Z16F_TIMER1_RL _HX32(ffffe313) /* 8-bit: Timer 1 Reload Low Byte */ +#define Z16F_TIMER1_PWM _HX32(ffffe314) /* 16-bit: Timer 1 PWM */ +# define Z16F_TIMER1_PWMH _HX32(ffffe314) /* 8-bit: Timer 1 PWM High Byte */ +# define Z16F_TIMER1_PWML _HX32(ffffe315) /* 8-bit: Timer 1 PWM Low Byte */ +#define Z16F_TIMER1_CTL _HX32(ffffe316) /* 16-bit: Timer 1 Control */ +# define Z16F_TIMER1_CTL0 _HX32(ffffe316) /* 8-bit: Timer 1 Control 0 */ +# define Z16F_TIMER1_CTL1 _HX32(ffffe317) /* 8-bit: Timer 1 Control 1 */ + +#define Z16F_TIMER2_HL _HX32(ffffe320) /* 16-bit: Timer 2 */ +# define Z16F_TIMER2_H _HX32(ffffe320) /* 8-bit: Timer 2 High Byte */ +# define Z16F_TIMER2_L _HX32(ffffe321) /* 8-bit: Timer 2 Low Byte */ +#define Z16F_TIMER2_R _HX32(ffffe322) /* 16-bit: Timer 2 Reload */ +# define Z16F_TIMER2_RH _HX32(ffffe322) /* 8-bit: Timer 2 Reload High Byte */ +# define Z16F_TIMER2_RL _HX32(ffffe323) /* 8-bit: Timer 2 Reload Low Byte */ +#define Z16F_TIMER2_PWM _HX32(ffffe324) /* 16-bit: Timer 2 PWM */ +# define Z16F_TIMER2_PWMH _HX32(ffffe324) /* 8-bit: Timer 2 PWM High Byte */ +# define Z16F_TIMER2_PWML _HX32(ffffe325) /* 8-bit: Timer 2 PWM Low Byte */ +#define Z16F_TIMER2_CTL _HX32(ffffe326) /* 16-bit: Timer 2 Control */ +# define Z16F_TIMER2_CTL0 _HX32(ffffe326) /* 8-bit: Timer 2 Control 0 */ +# define Z16F_TIMER2_CTL1 _HX32(ffffe327) /* 8-bit: Timer 2 Control 1 */ /* Common timer0/1/2 register bit definitions ***************************************/ -#define Z16F_TIMERCTL0_TMODE _HX8(80) /* Bit 7: Timer mode */ - /* Bits 5-6: Timer configuration, - * Interpretation depends on timer mode */ -#define Z16F_TIMERCTL0_RELOAD _HX8(00) /* Interrupt occurs on reload or capture */ -#define Z16F_TIMERCTL0_IDISABLED _HX8(40) /* Disabled */ -#define Z16F_TIMERCTL0_IINACTIVE _HX8(40) /* Interrrupt occurs on inactive gate edge */ -#define Z16F_TIMERCTL0_ICAPTURE _HX8(40) /* Interrupt occurs on capture */ -#define Z16F_TIMERCTL0_IRELOAD _HX8(60) /* Interrupt occurs on reload */ -#define Z16F_TIMERCTL0_CASCADE _HX8(10) /* Bit 4: Timer is cascaded */ - /* Bits 1-2: PW mode */ -#define Z16F_TIMERCTL0_NODELAY _HZ8(00) /* No delay */ -#define Z16F_TIMERCTL0_DELAY2 _HZ8(01) /* 2 cycle delay */ -#define Z16F_TIMERCTL0_DELAY4 _HZ8(02) /* 4 cycle delay */ -#define Z16F_TIMERCTL0_DELAY8 _HZ8(03) /* 8 cycle delay */ -#define Z16F_TIMERCTL0_DELAY16 _HZ8(04) /* 16 cycle delay */ -#define Z16F_TIMERCTL0_DELAY32 _HZ8(05) /* 32 cycle delay */ -#define Z16F_TIMERCTL0_DELAY64 _HZ8(06) /* 64 cycle delay */ -#define Z16F_TIMERCTL0_DELAY128 _HZ8(07) /* 128 cycle delay */ - -#define Z16F_TIMERCTL1_TEN _HX8(80) /* Bit 7: Timer enable */ -#define Z16F_TIMERCTL1_TPOL _HX8(40) /* Bit 6: Input output polarity */ - /* Bits 3-5: Timer prescale value */ -#define Z16F_TIMERSCTL1_DIV1 _HX8(00) /* Divide by 1 */ -#define Z16F_TIMERSCTL1_DIV2 _HX8(08) /* Divide by 2 */ -#define Z16F_TIMERSCTL1_DIV4 _HX8(10) /* Divide by 4 */ -#define Z16F_TIMERSCTL1_DIV8 _HX8(18) /* Divide by 8 */ -#define Z16F_TIMERSCTL1_DIV16 _HX8(20) /* Divide by 16 */ -#define Z16F_TIMERSCTL1_DIV32 _HX8(28) /* Divide by 32 */ -#define Z16F_TIMERSCTL1_DIV64 _HX8(30) /* Divide by 64 */ -#define Z16F_TIMERSCTL1_DIV128 _HX8(38) /* Divide by 128 */ - /* Bits 0-2: Timer mode + CTL0 TMODE bit*/ -#define Z16F_TIMERSCTL1_ONESHOT _HX8(00) /* One shot mode (CTL0 TMOD = 0) */ -#define Z16F_TIMERSCTL1_PWMDO _HX8(00) /* One shot mode (CTL0 TMOD = 1) */ -#define Z16F_TIMERSCTL1_CONT _HX8(01) /* Continuous mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_CAPRST _HX8(01) /* Capture restart mode (CTL0 TMOD = 1)*/ -#define Z16F_TIMERSCTL1_COUNTER _HX8(02) /* Counter mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_CMPCNTR _HX8(02) /* Comparator counter mode (CTL0 TMOD = 1)*/ -#define Z16F_TIMERSCTL1_PWMSO _HX8(03) /* PWM single output mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_TRIGOS _HX8(03) /* Triggered one shot (CTL0 TMOD = 1)*/ -#define Z16F_TIMERSCTL1_CAPTURE _HX8(04) /* Capture mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_COMPARE _HX8(05) /* Compare mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_GATED _HX8(06) /* Gated mode (CTL0 TMOD = 0)*/ -#define Z16F_TIMERSCTL1_CAPCMP _HX8(07) /* Capture/Compare mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERCTL0_TMODE _HX8(80) /* Bit 7: Timer mode */ + /* Bits 5-6: Timer configuration, + * Interpretation depends on timer mode */ +#define Z16F_TIMERCTL0_RELOAD _HX8(00) /* Interrupt occurs on reload or capture */ +#define Z16F_TIMERCTL0_IDISABLED _HX8(40) /* Disabled */ +#define Z16F_TIMERCTL0_IINACTIVE _HX8(40) /* Interrupt occurs on inactive gate edge */ +#define Z16F_TIMERCTL0_ICAPTURE _HX8(40) /* Interrupt occurs on capture */ +#define Z16F_TIMERCTL0_IRELOAD _HX8(60) /* Interrupt occurs on reload */ +#define Z16F_TIMERCTL0_CASCADE _HX8(10) /* Bit 4: Timer is cascaded */ + /* Bits 1-2: PW mode */ +#define Z16F_TIMERCTL0_NODELAY _HZ8(00) /* No delay */ +#define Z16F_TIMERCTL0_DELAY2 _HZ8(01) /* 2 cycle delay */ +#define Z16F_TIMERCTL0_DELAY4 _HZ8(02) /* 4 cycle delay */ +#define Z16F_TIMERCTL0_DELAY8 _HZ8(03) /* 8 cycle delay */ +#define Z16F_TIMERCTL0_DELAY16 _HZ8(04) /* 16 cycle delay */ +#define Z16F_TIMERCTL0_DELAY32 _HZ8(05) /* 32 cycle delay */ +#define Z16F_TIMERCTL0_DELAY64 _HZ8(06) /* 64 cycle delay */ +#define Z16F_TIMERCTL0_DELAY128 _HZ8(07) /* 128 cycle delay */ + +#define Z16F_TIMERCTL1_TEN _HX8(80) /* Bit 7: Timer enable */ +#define Z16F_TIMERCTL1_TPOL _HX8(40) /* Bit 6: Input output polarity */ + /* Bits 3-5: Timer prescale value */ +#define Z16F_TIMERSCTL1_DIV1 _HX8(00) /* Divide by 1 */ +#define Z16F_TIMERSCTL1_DIV2 _HX8(08) /* Divide by 2 */ +#define Z16F_TIMERSCTL1_DIV4 _HX8(10) /* Divide by 4 */ +#define Z16F_TIMERSCTL1_DIV8 _HX8(18) /* Divide by 8 */ +#define Z16F_TIMERSCTL1_DIV16 _HX8(20) /* Divide by 16 */ +#define Z16F_TIMERSCTL1_DIV32 _HX8(28) /* Divide by 32 */ +#define Z16F_TIMERSCTL1_DIV64 _HX8(30) /* Divide by 64 */ +#define Z16F_TIMERSCTL1_DIV128 _HX8(38) /* Divide by 128 */ + /* Bits 0-2: Timer mode + CTL0 TMODE bit*/ +#define Z16F_TIMERSCTL1_ONESHOT _HX8(00) /* One shot mode (CTL0 TMOD = 0) */ +#define Z16F_TIMERSCTL1_PWMDO _HX8(00) /* One shot mode (CTL0 TMOD = 1) */ +#define Z16F_TIMERSCTL1_CONT _HX8(01) /* Continuous mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_CAPRST _HX8(01) /* Capture restart mode (CTL0 TMOD = 1)*/ +#define Z16F_TIMERSCTL1_COUNTER _HX8(02) /* Counter mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_CMPCNTR _HX8(02) /* Comparator counter mode (CTL0 TMOD = 1)*/ +#define Z16F_TIMERSCTL1_PWMSO _HX8(03) /* PWM single output mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_TRIGOS _HX8(03) /* Triggered one shot (CTL0 TMOD = 1)*/ +#define Z16F_TIMERSCTL1_CAPTURE _HX8(04) /* Capture mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_COMPARE _HX8(05) /* Compare mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_GATED _HX8(06) /* Gated mode (CTL0 TMOD = 0)*/ +#define Z16F_TIMERSCTL1_CAPCMP _HX8(07) /* Capture/Compare mode (CTL0 TMOD = 0)*/ /* Register access macros ***********************************************************/ #ifndef __ASSEMBLY__ -# define getreg8(a) (*(uint8_t volatile _Near*)(a)) -# define putreg8(v,a) (*(uint8_t volatile _Near*)(a) = (v)) -# define getreg16(a) (*(uint16_t volatile _Near*)(a)) -# define putreg16(v,a) (*(uint16_t volatile _Near*)(a) = (v)) -# define getreg32(a) (*(uint32_t volatile _Near*)(a)) -# define putreg32(v,a) (*(uint32_t volatile _Near*)(a) = (v)) +# define getreg8(a) (*(uint8_t volatile _Near*)(a)) +# define putreg8(v,a) (*(uint8_t volatile _Near*)(a) = (v)) +# define getreg16(a) (*(uint16_t volatile _Near*)(a)) +# define putreg16(v,a) (*(uint16_t volatile _Near*)(a) = (v)) +# define getreg32(a) (*(uint32_t volatile _Near*)(a)) +# define putreg32(v,a) (*(uint32_t volatile _Near*)(a) = (v)) #endif /* __ASSEMBLY__ */ /************************************************************************************ diff --git a/nuttx/configs/16z/tools/dopatch.sh b/nuttx/configs/16z/tools/dopatch.sh index 5eaa8b881..1193ff792 100755 --- a/nuttx/configs/16z/tools/dopatch.sh +++ b/nuttx/configs/16z/tools/dopatch.sh @@ -34,11 +34,12 @@ # ############################################################################ -USAGE="${0} \$PWD" +USAGE="${0} [-R] \$PWD" WD=`pwd` TOOLDIR=${WD}/configs/16z/tools ME=${TOOLDIR}/dopatch.sh PATCH=${TOOLDIR}/zneo-zdsii-5_0_1-variadic-func-fix.patch +ARGS=${1} if [ ! -x ${ME} ]; then echo "ERROR: This script must be executed from the top-level NuttX directory" @@ -55,5 +56,5 @@ fi cd .. || \ { echo "ERROR: failed to CD to the parent directory"; exit 1; } -cat ${PATCH} | patch -p1 || \ +cat ${PATCH} | patch ${ARGS} -p1 || \ { echo "ERROR: patch failed" ; exit 1; } diff --git a/nuttx/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch b/nuttx/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch index b1464f340..b22efeb86 100644 --- a/nuttx/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch +++ b/nuttx/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch @@ -1,5 +1,5 @@ diff --git a/apps/nshlib/nsh_console.c b/apps/nshlib/nsh_console.c -index ba7dbe7..b9f9991 100644 +index ba7dbe7..45e4ab1 100644 --- a/apps/nshlib/nsh_console.c +++ b/apps/nshlib/nsh_console.c @@ -46,6 +46,7 @@ @@ -113,7 +113,7 @@ index ba7dbe7..b9f9991 100644 + return ret; +} diff --git a/apps/nshlib/nsh_console.h b/apps/nshlib/nsh_console.h -index c78362f..59bd8d7 100644 +index c78362f..207f9b9 100644 --- a/apps/nshlib/nsh_console.h +++ b/apps/nshlib/nsh_console.h @@ -47,6 +47,7 @@ diff --git a/nuttx/configs/z16f2800100zcog/tools/dopatch.sh b/nuttx/configs/z16f2800100zcog/tools/dopatch.sh index 9f738184a..f0f86a53e 100755 --- a/nuttx/configs/z16f2800100zcog/tools/dopatch.sh +++ b/nuttx/configs/z16f2800100zcog/tools/dopatch.sh @@ -34,11 +34,12 @@ # ############################################################################ -USAGE="${0} \$PWD" +USAGE="${0} [-R] \$PWD" WD=`pwd` TOOLDIR=${WD}/configs/z16f2800100zcog/tools ME=${TOOLDIR}/dopatch.sh PATCH=${TOOLDIR}/zneo-zdsii-5_0_1-variadic-func-fix.patch +ARGS=${1} if [ ! -x ${ME} ]; then echo "ERROR: This script must be executed from the top-level NuttX directory" @@ -55,5 +56,5 @@ fi cd .. || \ { echo "ERROR: failed to CD to the parent directory"; exit 1; } -cat ${PATCH} | patch -p1 || \ +cat ${PATCH} | patch ${ARGS} -p1 || \ { echo "ERROR: patch failed" ; exit 1; } diff --git a/nuttx/configs/z16f2800100zcog/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch b/nuttx/configs/z16f2800100zcog/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch index b1464f340..b22efeb86 100644 --- a/nuttx/configs/z16f2800100zcog/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch +++ b/nuttx/configs/z16f2800100zcog/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch @@ -1,5 +1,5 @@ diff --git a/apps/nshlib/nsh_console.c b/apps/nshlib/nsh_console.c -index ba7dbe7..b9f9991 100644 +index ba7dbe7..45e4ab1 100644 --- a/apps/nshlib/nsh_console.c +++ b/apps/nshlib/nsh_console.c @@ -46,6 +46,7 @@ @@ -113,7 +113,7 @@ index ba7dbe7..b9f9991 100644 + return ret; +} diff --git a/apps/nshlib/nsh_console.h b/apps/nshlib/nsh_console.h -index c78362f..59bd8d7 100644 +index c78362f..207f9b9 100644 --- a/apps/nshlib/nsh_console.h +++ b/apps/nshlib/nsh_console.h @@ -47,6 +47,7 @@ |