diff options
-rw-r--r-- | nuttx/net/Kconfig | 77 |
1 files changed, 54 insertions, 23 deletions
diff --git a/nuttx/net/Kconfig b/nuttx/net/Kconfig index 2339ee0f2..1bf791413 100644 --- a/nuttx/net/Kconfig +++ b/nuttx/net/Kconfig @@ -84,10 +84,20 @@ endif # NET_SOCKOPTS config NET_BUFSIZE int "Network packet size" - default 562 if !NET_SLIP - default 296 if NET_SLIP + default 1294 if !NET_SLIP && NET_IPv6 + default 590 if !NET_SLIP && !NET_IPv6 + default 296 if NET_SLIP && !NET_IPv6 ---help--- - uIP buffer size. Default: 562 + uIP buffer size. This size includes the size of TCP/UDP header, + the IP header, and the Ethernet header (assuming that the Ethernet + transport is used. + + IPv4 hosts are required to be able to handle an MSS of at least + 536 octets, resulting in a minimum buffer size of 536+20+20+14 = + 590 (For SLIP 256+20+20 = 296). + + IPv6 hosts are required to be able to handle an MSS of 1220 octets, + resulting in a minimum buffer size of of 1220+20+40+14 = 1294 config NET_TCPURGDATA bool "Urgent data" @@ -135,14 +145,23 @@ if NET_TCP_READAHEAD config NET_TCP_READAHEAD_BUFSIZE int "TCP/IP read-ahead buffer size" - default 562 + default 1220 if !NET_SLIP && NET_IPv6 + default 536 if !NET_SLIP && !NET_IPv6 + default 256 if NET_SLIP && !NET_IPv6 ---help--- Read-ahead buffers allows buffering of TCP/IP packets when there is no receive in place to catch the TCP packet. In that case, the packet will be retained in the NuttX read-ahead buffers. This setting specifies the size of one TCP/IP read-ahead buffer. - This should best be a equal to the maximum packet size (NET_BUFSIZE). + This should best be a equal to the maximum packet payload size (MSS). + + Optimally, the size of the read-ahead buffer will should the maximum + size of an incoming TCP packet payload (MSS). This MSS value is + determined by NET_BUFSIZE minus the size of TCP, IP, and Ethernet + headers (assuming you are using the Ethernet transport). IPv4 hosts + are required to be able to handle an MSS of 536 octets and IPv6 hosts + are required to be able to handle an MSS of 1220 octets. config NET_NTCP_READAHEAD_BUFFERS int "Number of TCP/IP read-ahead buffers" @@ -170,11 +189,21 @@ if NET_TCP_WRITE_BUFFERS config NET_TCP_WRITE_BUFSIZE int "TCP/IP write buffer size" - default 562 + default 1220 if !NET_SLIP && NET_IPv6 + default 536 if !NET_SLIP && !NET_IPv6 + default 256 if NET_SLIP && !NET_IPv6 ---help--- Write buffers allows buffering of ongoing TCP/IP packets, providing for higher performance, streamed output. + The size of the write buffer will determine the maximum size of an + outgoing TCP packet payload (MSS). This value should NOT exceed the + maximum MSS which is determined by NET_BUFSIZE minus the size of + TCP, IP, and Ethernet headers (assuming you are using the Ethernet + transport). IPv4 hosts are required to be able to handle an MSS + of 536 octets and IPv6 hosts are required to be able to handle an + MSS of 1220 octets. + This setting specifies the size of one TCP/IP write buffer. This should best be a equal to the maximum packet size (NET_BUFSIZE). @@ -258,6 +287,7 @@ config NET_UDP Enable or disable UDP networking support. if NET_UDP + config NET_UDP_CHECKSUMS bool "UDP checksums" default n @@ -292,7 +322,7 @@ config NET_RXAVAIL NOTE: If this option is enabled, the driver must support the rxavail() method in the uip_driver_s structure. -endif +endif # NET_UDP endmenu config NET_ICMP @@ -304,6 +334,7 @@ config NET_ICMP for sending replies to received ECHO (ping) requests. if NET_ICMP + config NET_ICMP_PING bool "ICMP ping interfaces" default n @@ -317,7 +348,7 @@ config NET_PINGADDRCONF ---help--- Use "ping" packet for setting IP address -endif +endif # NET_ICMP config NET_IGMP bool "IGMPv2 clientsupport" @@ -327,6 +358,7 @@ config NET_IGMP Enable IGMPv2 client support. if NET_IGMP + config PREALLOC_IGMPGROUPS int "Number of pre-allocated IGMP groups" default 4 @@ -334,9 +366,7 @@ config PREALLOC_IGMPGROUPS Pre-allocated IGMP groups are used only if needed from interrupt level group created (by the IGMP server). Default: 4. -endif - -if NET +endif # NET_IGMP config NET_STATISTICS bool "Collect network statistics" @@ -346,12 +376,14 @@ config NET_STATISTICS config NET_RECEIVE_WINDOW int "Receive window size" - default 562 + default 1220 if !NET_SLIP && NET_IPv6 + default 536 if !NET_SLIP && !NET_IPv6 + default 256 if NET_SLIP && !NET_IPv6 ---help--- The size of the advertised receiver's window. Should be set low - (i.e., to the size of the NET_BUFSIZE) if the application is slow - to process incoming data, or high (32768 bytes) if the application - processes data quickly. + (i.e., to the size of the MSS) if the application is slow to process + incoming data, or high (32768 bytes) if the application processes + data quickly. config NET_ARPTAB_SIZE int "ARP table size" @@ -402,16 +434,15 @@ config NET_SLIP defined in the NuttX configuration file, then SLIP will be supported. The basic differences between the SLIP and Ethernet configurations is that when SLIP is selected: - - * The link level header (that comes before the IP header) is omitted. - * All MAC address processing is suppressed. - * ARP is disabled. - + + * The link level header (that comes before the IP header) is omitted. + * All MAC address processing is suppressed. + * ARP is disabled. + If NET_SLIP is not selected, then Ethernet will be used (there is no need to define anything special in the configuration file to use Ethernet -- it is the default). -endif if NET_SLIP config SLIP_NINTERFACES @@ -434,5 +465,5 @@ config SLIP_DEFPRIO ---help--- The priority of the SLIP RX and TX tasks. Default: 128 -endif -endif +endif # NET_SLIP +endif # NET |