diff options
-rw-r--r-- | nuttx/ChangeLog | 4 | ||||
-rw-r--r-- | nuttx/drivers/mmcsd/mmcsd_sdio.c | 78 |
2 files changed, 50 insertions, 32 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index a08d71418..691f3dcc3 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -5339,3 +5339,7 @@ functional on the SAMA5 with DMA! (2013-8-10). * arch/arm/src/sam34/sam3u_periphclks.h: Correct a typo in a register name (2013-8-10). + * drivers/mmcsd/mmcsd_sdio.c: Correction for a bad return value + when multiple block SDIO transfers are suppressed. By Andrew Tridgell + via Lorenz Meier (2013-8-10). + diff --git a/nuttx/drivers/mmcsd/mmcsd_sdio.c b/nuttx/drivers/mmcsd/mmcsd_sdio.c index b265fab4a..4d39e847a 100644 --- a/nuttx/drivers/mmcsd/mmcsd_sdio.c +++ b/nuttx/drivers/mmcsd/mmcsd_sdio.c @@ -1,7 +1,7 @@ /**************************************************************************** * drivers/mmcsd/mmcsd_sdio.c * - * Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -293,7 +293,7 @@ static void mmcsd_takesem(FAR struct mmcsd_state_s *priv) /* Lock the bus if mutually exclusive access to the SDIO bus is required * on this platform. */ - + #ifdef CONFIG_SDIO_MUXBUS SDIO_LOCK(priv->dev, TRUE); #endif @@ -607,7 +607,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) #endif /* Word 3: Bits 32-63 - * + * * Byte addressed SD: * C_SIZE 73:62 Device size * VDD_R_CURR_MIN 61:59 Max. read current at Vcc min @@ -659,7 +659,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) priv->nblocks = priv->capacity >> 9; #if defined(CONFIG_DEBUG) && defined (CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_FS) - decoded.u.sdblock.csize = csize; + decoded.u.sdblock.csize = csize; decoded.u.sdblock.sderblen = (csd[2] >> 14) & 1; decoded.u.sdblock.sdsectorsize = (csd[2] >> 7) & 0x7f; decoded.u.sdblock.sdwpgrpsize = csd[2] & 0x7f; @@ -697,7 +697,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) #if defined(CONFIG_DEBUG) && defined (CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_FS) if (IS_SD(priv->type)) { - decoded.u.sdbyte.csize = csize; + decoded.u.sdbyte.csize = csize; decoded.u.sdbyte.vddrcurrmin = (csd[2] >> 27) & 7; decoded.u.sdbyte.vddrcurrmax = (csd[2] >> 24) & 7; decoded.u.sdbyte.vddwcurrmin = (csd[2] >> 21) & 7; @@ -710,7 +710,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) #ifdef CONFIG_MMCSD_MMCSUPPORT else if (IS_MMC(priv->type)) { - decoded.u.mmc.csize = csize; + decoded.u.mmc.csize = csize; decoded.u.mmc.vddrcurrmin = (csd[2] >> 27) & 7; decoded.u.mmc.vddrcurrmax = (csd[2] >> 24) & 7; decoded.u.mmc.vddwcurrmin = (csd[2] >> 21) & 7; @@ -737,7 +737,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) * FILE_FORMAT 10:11 File format * ECC 9:8 ECC (MMC only) * CRC 7:1 CRC - * Not used 0:0 + * Not used 0:0 */ permwriteprotect = (csd[3] >> 13) & 1; @@ -757,7 +757,7 @@ static void mmcsd_decodeCSD(FAR struct mmcsd_state_s *priv, uint32_t csd[4]) decoded.fileformat = (csd[3] >> 10) & 3; decoded.mmcecc = (csd[3] >> 8) & 3; decoded.crc = (csd[3] >> 1) & 0x7f; - + fvdbg("CSD:\n"); fvdbg(" CSD_STRUCTURE: %d SPEC_VERS: %d (MMC)\n", decoded.csdstructure, decoded.mmcspecvers); @@ -1043,7 +1043,7 @@ static int mmcsd_verifystate(FAR struct mmcsd_state_s *priv, uint32_t state) * * Description: * Return true if the the card is unlocked an not write protected. The - * + * * ****************************************************************************/ @@ -1501,13 +1501,16 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer, /* Read each block using only the single block transfer method */ endblock = startblock + nblocks - 1; + ret = nblocks; + for (block = startblock; block <= endblock; block++) { /* Read this block into the user buffer */ - ret = mmcsd_readsingle(priv, buffer, block); - if (ret < 0) + ssize_t nread = mmcsd_readsingle(priv, buffer, block); + if (nread < 0) { + ret = nread; break; } @@ -1515,6 +1518,7 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer, buffer += priv->blocksize; } + #else /* Use either the single- or muliple-block transfer method */ @@ -1526,6 +1530,7 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer, { ret = mmcsd_readmultiple(priv, buffer, startblock, nblocks); } + #endif /* On success, return the number of blocks read */ @@ -1816,7 +1821,7 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer, size_t block; size_t endblock; #endif - ssize_t ret; + ssize_t ret = nblocks; DEBUGASSERT(priv != NULL && buffer != NULL && nblocks > 0) @@ -1828,9 +1833,10 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer, { /* Write this block from the user buffer */ - ret = mmcsd_writesingle(priv, buffer, block); - if (ret < 0) + ssize_t nread = mmcsd_writesingle(priv, buffer, block); + if (nread < 0) { + ret = nread; break; } @@ -1838,6 +1844,7 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer, buffer += priv->blocksize; } + #else if (nblocks == 1) { @@ -1847,6 +1854,7 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer, { ret = mmcsd_writemultiple(priv, buffer, startblock, nblocks); } + #endif /* On success, return the number of blocks written */ @@ -1923,7 +1931,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer, size_t sector; size_t endsector; #endif - ssize_t ret = 0; + ssize_t ret = nsectors; DEBUGASSERT(inode && inode->i_private); priv = (FAR struct mmcsd_state_s *)inode->i_private; @@ -1947,9 +1955,10 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer, { /* Read this sector into the user buffer */ - ret = mmcsd_readsingle(priv, buffer, sector); - if (ret < 0) + ssize_t nread = mmcsd_readsingle(priv, buffer, sector); + if (nread < 0) { + ret = nread; break; } @@ -1957,6 +1966,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer, buffer += priv->blocksize; } + #else /* Use either the single- or muliple-block transfer method */ @@ -1968,6 +1978,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer, { ret = mmcsd_readmultiple(priv, buffer, startsector, nsectors); } + #endif mmcsd_givesem(priv); } @@ -1995,7 +2006,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, FAR const unsigned char *buf size_t sector; size_t endsector; #endif - ssize_t ret = 0; + ssize_t ret = nsectors; fvdbg("sector: %d nsectors: %d sectorsize: %d\n"); DEBUGASSERT(inode && inode->i_private); @@ -2016,9 +2027,10 @@ static ssize_t mmcsd_write(FAR struct inode *inode, FAR const unsigned char *buf { /* Write this block from the user buffer */ - ret = mmcsd_writesingle(priv, buffer, sector); - if (ret < 0) + ssize_t nread = mmcsd_writesingle(priv, buffer, sector); + if (nread < 0) { + ret = nread; break; } @@ -2026,6 +2038,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, FAR const unsigned char *buf buffer += priv->blocksize; } + #else /* Use either the single- or multiple-block transfer method */ @@ -2037,6 +2050,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, FAR const unsigned char *buf { ret = mmcsd_writemultiple(priv, buffer, startsector, nsectors); } + #endif mmcsd_givesem(priv); @@ -2149,7 +2163,7 @@ static int mmcsd_ioctl(FAR struct inode *inode, int cmd, unsigned long arg) { fdbg("ERROR: mmcsd_removed failed: %d\n", ret); } - + /* Enable logic to detect if a card is re-inserted */ SDIO_CALLBACKENABLE(priv->dev, SDIOMEDIA_INSERTED); @@ -2175,7 +2189,7 @@ static int mmcsd_ioctl(FAR struct inode *inode, int cmd, unsigned long arg) * Description: * This is a callback function from the SDIO driver that indicates that * there has been a change in the slot... either a card has been inserted - * or a card has been removed. + * or a card has been removed. * * Assumptions: * This callback is NOT supposd to run in the context of an interrupt @@ -2191,7 +2205,7 @@ static void mmcsd_mediachange(FAR void *arg) DEBUGASSERT(priv); /* Is there a card present in the slot? */ - + mmcsd_takesem(priv); if (SDIO_PRESENT(priv->dev)) { @@ -2304,12 +2318,12 @@ static int mmcsd_widebus(FAR struct mmcsd_state_s *priv) fdbg("WARNING: Card does not support wide-bus operation\n"); return -ENOSYS; - + #else /* CONFIG_SDIO_WIDTH_D1_ONLY */ fvdbg("Wide-bus operation is disabled\n"); return -ENOSYS; - + #endif /* CONFIG_SDIO_WIDTH_D1_ONLY */ } @@ -2365,7 +2379,7 @@ static int mmcsd_mmcinitialize(FAR struct mmcsd_state_s *priv) } /* This should have caused a transition to standby state. However, this will - * not be reflected in the present R1 status. R1/6 contains the state of the + * not be reflected in the present R1 status. R1/6 contains the state of the * card when the command was received, not when it completed execution. * * Verify that we are in standby state/data-transfer mode @@ -2453,7 +2467,7 @@ static int mmcsd_sdinitialize(FAR struct mmcsd_state_s *priv) * to assign a logical address to the card. For MMC, the host assigns the * address; for SD, the memory card has this responsibility. CMD3 causes * transition to standby state/data-transfer mode - * + * * Send CMD3 with argument 0, SD card publishes its RCA in the response. */ @@ -2467,7 +2481,7 @@ static int mmcsd_sdinitialize(FAR struct mmcsd_state_s *priv) fvdbg("RCA: %04x\n", priv->rca); /* This should have caused a transition to standby state. However, this will - * not be reflected in the present R1 status. R1/6 contains the state of + * not be reflected in the present R1 status. R1/6 contains the state of * the card when the command was received, not when it completed execution. * * Verify that we are in standby state/data-transfer mode @@ -2836,7 +2850,7 @@ static int mmcsd_probe(FAR struct mmcsd_state_s *priv) #endif /* Otherwise, we are going to probe the card. There are lots of - * possibilities here: We may think that there is a card in the slot, + * possibilities here: We may think that there is a card in the slot, * or not. There may be a card in the slot, or not. If there is * card in the slot, perhaps it is a different card than we one we * think is there? The safest thing to do is to process the card @@ -3000,8 +3014,8 @@ static int mmcsd_hwinitialize(FAR struct mmcsd_state_s *priv) * 2. Electrical insertion that can be sensed using the pull-up resistor * on CD/DAT3 (both SD/MMC), * 3. Or by periodic attempts to initialize the card from software. - * - * The behavior of SDIO_PRESENT() is to use whatever information is available + * + * The behavior of SDIO_PRESENT() is to use whatever information is available * on the particular platform. If no card insertion information is available * (polling only), then SDIO_PRESENT() will always return true and we will * try to initialize the card. @@ -3128,7 +3142,7 @@ int mmcsd_slotinitialize(int minor, FAR struct sdio_dev_s *dev) if (ret == -ENODEV) { /* No card in the slot (or if there is, we could not recognize - * it).. Setup to receive the media inserted event + * it).. Setup to receive the media inserted event */ SDIO_CALLBACKENABLE(priv->dev, SDIOMEDIA_INSERTED); |