diff options
Diffstat (limited to 'apps/include/modbus/mbconfig.h')
| -rw-r--r-- | apps/include/modbus/mbconfig.h | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/apps/include/modbus/mbconfig.h b/apps/include/modbus/mbconfig.h deleted file mode 100644 index 21252ae58..000000000 --- a/apps/include/modbus/mbconfig.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. - * Copyright (c) 2006 Christian Walter <wolti@sil.at> - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * File: $Id: mbconfig.h,v 1.15 2010/06/06 13:54:40 wolti Exp $ - */ - -#ifndef _MB_CONFIG_H -#define _MB_CONFIG_H - -#ifdef __cplusplus -PR_BEGIN_EXTERN_C -#endif -/* ----------------------- Defines ------------------------------------------*/ -/*! \defgroup modbus_cfg Modbus Configuration - * - * Most modules in the protocol stack are completly optional and can be - * excluded. This is specially important if target resources are very small - * and program memory space should be saved.<br> - * - * All of these settings are available in the file <code>mbconfig.h</code> - */ -/*! \addtogroup modbus_cfg - * @{ - */ -/*! \brief If Modbus ASCII support is enabled. */ -#define MB_ASCII_ENABLED ( 1 ) - -/*! \brief If Modbus RTU support is enabled. */ -#define MB_RTU_ENABLED ( 1 ) - -/*! \brief If Modbus TCP support is enabled. */ -#define MB_TCP_ENABLED ( 0 ) - -/*! \brief The character timeout value for Modbus ASCII. - * - * The character timeout value is not fixed for Modbus ASCII and is therefore - * a configuration option. It should be set to the maximum expected delay - * time of the network. - */ -#define MB_ASCII_TIMEOUT_SEC ( 1 ) - -/*! \brief Timeout to wait in ASCII prior to enabling transmitter. - * - * If defined the function calls vMBPortSerialDelay with the argument - * MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS to allow for a delay before - * the serial transmitter is enabled. This is required because some - * targets are so fast that there is no time between receiving and - * transmitting the frame. If the master is to slow with enabling its - * receiver then he will not receive the response correctly. - */ -#ifndef MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS -#define MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS ( 0 ) -#endif - -/*! \brief Maximum number of Modbus functions codes the protocol stack - * should support. - * - * The maximum number of supported Modbus functions must be greater than - * the sum of all enabled functions in this file and custom function - * handlers. If set to small adding more functions will fail. - */ -#define MB_FUNC_HANDLERS_MAX ( 16 ) - -/*! \brief Number of bytes which should be allocated for the <em>Report Slave ID - * </em>command. - * - * This number limits the maximum size of the additional segment in the - * report slave id function. See eMBSetSlaveID( ) for more information on - * how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED - * is set to <code>1</code>. - */ -#define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 ) - -/*! \brief If the <em>Report Slave ID</em> function should be enabled. */ -#define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 ) - -/*! \brief If the <em>Read Input Registers</em> function should be enabled. */ -#define MB_FUNC_READ_INPUT_ENABLED ( 1 ) - -/*! \brief If the <em>Read Holding Registers</em> function should be enabled. */ -#define MB_FUNC_READ_HOLDING_ENABLED ( 1 ) - -/*! \brief If the <em>Write Single Register</em> function should be enabled. */ -#define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 ) - -/*! \brief If the <em>Write Multiple registers</em> function should be enabled. */ -#define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 ) - -/*! \brief If the <em>Read Coils</em> function should be enabled. */ -#define MB_FUNC_READ_COILS_ENABLED ( 1 ) - -/*! \brief If the <em>Write Coils</em> function should be enabled. */ -#define MB_FUNC_WRITE_COIL_ENABLED ( 1 ) - -/*! \brief If the <em>Write Multiple Coils</em> function should be enabled. */ -#define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 ) - -/*! \brief If the <em>Read Discrete Inputs</em> function should be enabled. */ -#define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 ) - -/*! \brief If the <em>Read/Write Multiple Registers</em> function should be enabled. */ -#define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 ) - -/*! @} */ -#ifdef __cplusplus - PR_END_EXTERN_C -#endif -#endif |