diff options
Diffstat (limited to 'apps/modbus/rtu')
-rw-r--r-- | apps/modbus/rtu/mbcrc.c | 98 | ||||
-rw-r--r-- | apps/modbus/rtu/mbcrc.h | 36 | ||||
-rw-r--r-- | apps/modbus/rtu/mbrtu.c | 355 | ||||
-rw-r--r-- | apps/modbus/rtu/mbrtu.h | 51 |
4 files changed, 540 insertions, 0 deletions
diff --git a/apps/modbus/rtu/mbcrc.c b/apps/modbus/rtu/mbcrc.c new file mode 100644 index 000000000..29b9ea765 --- /dev/null +++ b/apps/modbus/rtu/mbcrc.c @@ -0,0 +1,98 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbcrc.c,v 1.7 2007/02/18 23:50:27 wolti Exp $ + */ + +/* ----------------------- Platform includes --------------------------------*/ +#include "port.h" + +static const UCHAR aucCRCHi[] = { + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, + 0x00, 0xC1, 0x81, 0x40 +}; + +static const UCHAR aucCRCLo[] = { + 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7, + 0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, + 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, + 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC, + 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3, + 0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32, + 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, + 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, + 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF, + 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26, + 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, + 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, + 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, + 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA, + 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5, + 0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0, + 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, + 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, + 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, + 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C, + 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, + 0x41, 0x81, 0x80, 0x40 +}; + +USHORT +usMBCRC16( UCHAR * pucFrame, USHORT usLen ) +{ + UCHAR ucCRCHi = 0xFF; + UCHAR ucCRCLo = 0xFF; + int iIndex; + + while( usLen-- ) + { + iIndex = ucCRCLo ^ *( pucFrame++ ); + ucCRCLo = ( UCHAR )( ucCRCHi ^ aucCRCHi[iIndex] ); + ucCRCHi = aucCRCLo[iIndex]; + } + return ( USHORT )( ucCRCHi << 8 | ucCRCLo ); +} diff --git a/apps/modbus/rtu/mbcrc.h b/apps/modbus/rtu/mbcrc.h new file mode 100644 index 000000000..db227763f --- /dev/null +++ b/apps/modbus/rtu/mbcrc.h @@ -0,0 +1,36 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbcrc.h,v 1.5 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_CRC_H +#define _MB_CRC_H + +USHORT usMBCRC16( UCHAR * pucFrame, USHORT usLen ); + +#endif diff --git a/apps/modbus/rtu/mbrtu.c b/apps/modbus/rtu/mbrtu.c new file mode 100644 index 000000000..fc9b854ff --- /dev/null +++ b/apps/modbus/rtu/mbrtu.c @@ -0,0 +1,355 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbrtu.c,v 1.18 2007/09/12 10:15:56 wolti Exp $ + */ + +/* ----------------------- System includes ----------------------------------*/ +#include "stdlib.h" +#include "string.h" + +/* ----------------------- Platform includes --------------------------------*/ +#include "port.h" + +/* ----------------------- Modbus includes ----------------------------------*/ +#include "mb.h" +#include "mbrtu.h" +#include "mbframe.h" + +#include "mbcrc.h" +#include "mbport.h" + +/* ----------------------- Defines ------------------------------------------*/ +#define MB_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */ +#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus RTU frame. */ +#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */ +#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */ +#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */ + +/* ----------------------- Type definitions ---------------------------------*/ +typedef enum +{ + STATE_RX_INIT, /*!< Receiver is in initial state. */ + STATE_RX_IDLE, /*!< Receiver is in idle state. */ + STATE_RX_RCV, /*!< Frame is beeing received. */ + STATE_RX_ERROR /*!< If the frame is invalid. */ +} eMBRcvState; + +typedef enum +{ + STATE_TX_IDLE, /*!< Transmitter is in idle state. */ + STATE_TX_XMIT /*!< Transmitter is in transfer state. */ +} eMBSndState; + +/* ----------------------- Static variables ---------------------------------*/ +static volatile eMBSndState eSndState; +static volatile eMBRcvState eRcvState; + +volatile UCHAR ucRTUBuf[MB_SER_PDU_SIZE_MAX]; + +static volatile UCHAR *pucSndBufferCur; +static volatile USHORT usSndBufferCount; + +static volatile USHORT usRcvBufferPos; + +/* ----------------------- Start implementation -----------------------------*/ +eMBErrorCode +eMBRTUInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity ) +{ + eMBErrorCode eStatus = MB_ENOERR; + ULONG usTimerT35_50us; + + ( void )ucSlaveAddress; + ENTER_CRITICAL_SECTION( ); + + /* Modbus RTU uses 8 Databits. */ + if( xMBPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE ) + { + eStatus = MB_EPORTERR; + } + else + { + /* If baudrate > 19200 then we should use the fixed timer values + * t35 = 1750us. Otherwise t35 must be 3.5 times the character time. + */ + if( ulBaudRate > 19200 ) + { + usTimerT35_50us = 35; /* 1800us. */ + } + else + { + /* The timer reload value for a character is given by: + * + * ChTimeValue = Ticks_per_1s / ( Baudrate / 11 ) + * = 11 * Ticks_per_1s / Baudrate + * = 220000 / Baudrate + * The reload for t3.5 is 1.5 times this value and similary + * for t3.5. + */ + usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate ); + } + if( xMBPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE ) + { + eStatus = MB_EPORTERR; + } + } + EXIT_CRITICAL_SECTION( ); + + return eStatus; +} + +void +eMBRTUStart( void ) +{ + ENTER_CRITICAL_SECTION( ); + /* Initially the receiver is in the state STATE_RX_INIT. we start + * the timer and if no character is received within t3.5 we change + * to STATE_RX_IDLE. This makes sure that we delay startup of the + * modbus protocol stack until the bus is free. + */ + eRcvState = STATE_RX_INIT; + vMBPortSerialEnable( TRUE, FALSE ); + vMBPortTimersEnable( ); + + EXIT_CRITICAL_SECTION( ); +} + +void +eMBRTUStop( void ) +{ + ENTER_CRITICAL_SECTION( ); + vMBPortSerialEnable( FALSE, FALSE ); + vMBPortTimersDisable( ); + EXIT_CRITICAL_SECTION( ); +} + +eMBErrorCode +eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength ) +{ + BOOL xFrameReceived = FALSE; + eMBErrorCode eStatus = MB_ENOERR; + + ENTER_CRITICAL_SECTION( ); + assert( usRcvBufferPos < MB_SER_PDU_SIZE_MAX ); + + /* Length and CRC check */ + if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN ) + && ( usMBCRC16( ( UCHAR * ) ucRTUBuf, usRcvBufferPos ) == 0 ) ) + { + /* Save the address field. All frames are passed to the upper layed + * and the decision if a frame is used is done there. + */ + *pucRcvAddress = ucRTUBuf[MB_SER_PDU_ADDR_OFF]; + + /* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus + * size of address field and CRC checksum. + */ + *pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC ); + + /* Return the start of the Modbus PDU to the caller. */ + *pucFrame = ( UCHAR * ) & ucRTUBuf[MB_SER_PDU_PDU_OFF]; + xFrameReceived = TRUE; + } + else + { + eStatus = MB_EIO; + } + + EXIT_CRITICAL_SECTION( ); + return eStatus; +} + +eMBErrorCode +eMBRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength ) +{ + eMBErrorCode eStatus = MB_ENOERR; + USHORT usCRC16; + + ENTER_CRITICAL_SECTION( ); + + /* Check if the receiver is still in idle state. If not we where to + * slow with processing the received frame and the master sent another + * frame on the network. We have to abort sending the frame. + */ + if( eRcvState == STATE_RX_IDLE ) + { + /* First byte before the Modbus-PDU is the slave address. */ + pucSndBufferCur = ( UCHAR * ) pucFrame - 1; + usSndBufferCount = 1; + + /* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */ + pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress; + usSndBufferCount += usLength; + + /* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */ + usCRC16 = usMBCRC16( ( UCHAR * ) pucSndBufferCur, usSndBufferCount ); + ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF ); + ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 ); + + /* Activate the transmitter. */ + eSndState = STATE_TX_XMIT; + vMBPortSerialEnable( FALSE, TRUE ); + } + else + { + eStatus = MB_EIO; + } + EXIT_CRITICAL_SECTION( ); + return eStatus; +} + +BOOL +xMBRTUReceiveFSM( void ) +{ + BOOL xTaskNeedSwitch = FALSE; + UCHAR ucByte; + + assert( eSndState == STATE_TX_IDLE ); + + /* Always read the character. */ + ( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte ); + + switch ( eRcvState ) + { + /* If we have received a character in the init state we have to + * wait until the frame is finished. + */ + case STATE_RX_INIT: + vMBPortTimersEnable( ); + break; + + /* In the error state we wait until all characters in the + * damaged frame are transmitted. + */ + case STATE_RX_ERROR: + vMBPortTimersEnable( ); + break; + + /* In the idle state we wait for a new character. If a character + * is received the t1.5 and t3.5 timers are started and the + * receiver is in the state STATE_RX_RECEIVCE. + */ + case STATE_RX_IDLE: + usRcvBufferPos = 0; + ucRTUBuf[usRcvBufferPos++] = ucByte; + eRcvState = STATE_RX_RCV; + + /* Enable t3.5 timers. */ + vMBPortTimersEnable( ); + break; + + /* We are currently receiving a frame. Reset the timer after + * every character received. If more than the maximum possible + * number of bytes in a modbus frame is received the frame is + * ignored. + */ + case STATE_RX_RCV: + if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX ) + { + ucRTUBuf[usRcvBufferPos++] = ucByte; + } + else + { + eRcvState = STATE_RX_ERROR; + } + vMBPortTimersEnable( ); + break; + } + return xTaskNeedSwitch; +} + +BOOL +xMBRTUTransmitFSM( void ) +{ + BOOL xNeedPoll = FALSE; + + assert( eRcvState == STATE_RX_IDLE ); + + switch ( eSndState ) + { + /* We should not get a transmitter event if the transmitter is in + * idle state. */ + case STATE_TX_IDLE: + /* enable receiver/disable transmitter. */ + vMBPortSerialEnable( TRUE, FALSE ); + break; + + case STATE_TX_XMIT: + /* check if we are finished. */ + if( usSndBufferCount != 0 ) + { + xMBPortSerialPutByte( ( CHAR )*pucSndBufferCur ); + pucSndBufferCur++; /* next byte in sendbuffer. */ + usSndBufferCount--; + } + else + { + xNeedPoll = xMBPortEventPost( EV_FRAME_SENT ); + /* Disable transmitter. This prevents another transmit buffer + * empty interrupt. */ + vMBPortSerialEnable( TRUE, FALSE ); + eSndState = STATE_TX_IDLE; + } + break; + } + + return xNeedPoll; +} + +BOOL +xMBRTUTimerT35Expired( void ) +{ + BOOL xNeedPoll = FALSE; + + switch ( eRcvState ) + { + /* Timer t35 expired. Startup phase is finished. */ + case STATE_RX_INIT: + xNeedPoll = xMBPortEventPost( EV_READY ); + break; + + /* A frame was received and t35 expired. Notify the listener that + * a new frame was received. */ + case STATE_RX_RCV: + xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED ); + break; + + /* An error occured while receiving the frame. */ + case STATE_RX_ERROR: + break; + + /* Function called in an illegal state. */ + default: + assert( ( eRcvState == STATE_RX_INIT ) || + ( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_ERROR ) ); + } + + vMBPortTimersDisable( ); + eRcvState = STATE_RX_IDLE; + + return xNeedPoll; +} diff --git a/apps/modbus/rtu/mbrtu.h b/apps/modbus/rtu/mbrtu.h new file mode 100644 index 000000000..8d8bd1f0a --- /dev/null +++ b/apps/modbus/rtu/mbrtu.h @@ -0,0 +1,51 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter <wolti@sil.at> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbrtu.h,v 1.9 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_RTU_H +#define _MB_RTU_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + eMBErrorCode eMBRTUInit( UCHAR slaveAddress, UCHAR ucPort, ULONG ulBaudRate, + eMBParity eParity ); +void eMBRTUStart( void ); +void eMBRTUStop( void ); +eMBErrorCode eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength ); +eMBErrorCode eMBRTUSend( UCHAR slaveAddress, const UCHAR * pucFrame, USHORT usLength ); +BOOL xMBRTUReceiveFSM( void ); +BOOL xMBRTUTransmitFSM( void ); +BOOL xMBRTUTimerT15Expired( void ); +BOOL xMBRTUTimerT35Expired( void ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif |