diff options
Diffstat (limited to 'apps/system/composite/Kconfig')
| -rw-r--r-- | apps/system/composite/Kconfig | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/apps/system/composite/Kconfig b/apps/system/composite/Kconfig new file mode 100644 index 000000000..c2850637d --- /dev/null +++ b/apps/system/composite/Kconfig @@ -0,0 +1,156 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +config SYSTEM_COMPOSITE + bool "USB composite class controls" + default n + depends on USBDEV_COMPOSITE && !KERNEL_BUILD + ---help--- + Enable the USB composite class controls. These controls include: + + conn: Connect the mass storage device to the host + disconn: Disconnect the mass storage device to the host + +if SYSTEM_COMPOSITE +if USBMSC_COMPOSITE + +config SYSTEM_COMPOSITE_NLUNS + int "Number of LUNs" + default 1 + ---help--- + Defines the number of logical units (LUNs) exported by the USB + storage driver. Each LUN corresponds to one exported block driver + (or partition of a block driver). May be 1, 2, or 3. Default is 1. + +config SYSTEM_COMPOSITE_DEVMINOR1 + int "LUN1 Minor Device Number" + default 0 + ---help--- + The minor device number of the block driver for the first LUN. For + example, N in /dev/mmcsdN. Used for registering the block driver. + Default is zero. + +config SYSTEM_COMPOSITE_DEVPATH1 + string "LUN1 Device Path" + default "/dev/mmcsd0" + ---help--- + The full path to the registered block driver. Default is + "/dev/mmcsd0" + +config SYSTEM_COMPOSITE_DEVMINOR2 + int "LUN2 Minor Device Number" + default 1 + ---help--- + The minor device number of the block driver for the second LUN. For + example, N in /dev/mmcsdN. Used for registering the block driver. + Ignored if SYSTEM_COMPOSITE_NLUNS < 2. Default is one. + +config SYSTEM_COMPOSITE_DEVPATH2 + string "LUN2 Device Path" + default "/dev/mmcsd1" + ---help--- + The full path to the registered block driver. Ignored if + SYSTEM_COMPOSITE_NLUNS < 2. Default is "/dev/mmcsd1" + +config SYSTEM_COMPOSITE_DEVMINOR3 + int "LUN3 Minor Device Number" + default 2 + ---help--- + The minor device number of the block driver for the third LUN. For + example, N in /dev/mmcsdN. Used for registering the block driver. + Ignored if SYSTEM_COMPOSITE_NLUNS < 2. Default is two. + +config SYSTEM_COMPOSITE_DEVPATH3 + string "LUN3 Device Path" + default "/dev/mmcsd2" + ---help--- + The full path to the registered block driver. Ignored if + SYSTEM_COMPOSITE_NLUNS < 2. Default is "/dev/mmcsd2" + +endif # USBMSC_COMPOSITE + +if CDCACM_COMPOSITE + +config SYSTEM_COMPOSITE_TTYUSB + int "USB serial device minor number + default 0 + ---help--- + The minor number of the USB serial device. Default is zero + (corresponding to /dev/ttyUSB0 or /dev/ttyACM0). + +config SYSTEM_COMPOSITE_SERDEV + string "USB serial device path" + default "/dev/ttyACM0" + ---help--- + The string corresponding to SYSTEM_COMPOSITE_TTYUSB. If + SYSTEM_COMPOSITE_TTYUSB is zero, then this would be "/dev/ttyUSB0" + (for the PL2303 emulation) or "/dev/ttyACM0" (for the CDC/ACM serial + device). + +config SYSTEM_COMPOSITE_BUFSIZE + int "Serial I/O buffer size" + default 256 + ---help--- + The size of the serial I/O buffer in bytes. Default 256 bytes. + +endif # CDCACM_COMPOSITE + +if USBDEV_TRACE || DEBUG_USB + +config SYSTEM_COMPOSITE_TRACEINIT + bool "USB Trace Initialization" + default n + ---help--- + If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), + then the add-on code will also manage the USB trace output. The + amount of trace output can be controlled this configuration value: + This setting will show USB initialization events + +config SYSTEM_COMPOSITE_TRACECLASS + bool "USB Trace Class" + default n + ---help--- + If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), + then the add-on code will also manage the USB trace output. The + amount of trace output can be controlled this configuration value: + This setting will show USB class driver events + +config SYSTEM_COMPOSITE_TRACETRANSFERS + bool "USB Trace Transfers" + default n + ---help--- + If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), + then the add-on code will also manage the USB trace output. The + amount of trace output can be controlled this configuration value: + This setting will show USB data transfer events + +config SYSTEM_COMPOSITE_TRACECONTROLLER + bool "USB Trace Device Controller Events" + default n + ---help--- + If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), + then the add-on code will also manage the USB trace output. The + amount of trace output can be controlled this configuration value: + This setting will show USB device controller events + +config SYSTEM_COMPOSITE_TRACEINTERRUPTS + bool "USB Trace Device Controller Interrupt Events" + default n + ---help--- + If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), + then the add-on code will also manage the USB trace output. The + amount of trace output can be controlled this configuration value: + This setting will show USB device controller interrupt-related events. + +endif # USBDEV_TRACE || DEBUG_USB + +config SYSTEM_COMPOSITE_DEBUGMM + bool "Memory usage debug" + default n + ---help--- + Enables some debug tests to check for memory usage and memory leaks. + +endif + |