diff options
Diffstat (limited to 'misc/buildroot/toolchain/nxflat/nxflat.h')
-rw-r--r-- | misc/buildroot/toolchain/nxflat/nxflat.h | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/misc/buildroot/toolchain/nxflat/nxflat.h b/misc/buildroot/toolchain/nxflat/nxflat.h new file mode 100644 index 000000000..e8419426a --- /dev/null +++ b/misc/buildroot/toolchain/nxflat/nxflat.h @@ -0,0 +1,164 @@ +/**************************************************************************** + * toolchain/nxflat/nxflat.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __TOOLCHAIN_NXFLAT_NXFLAT_H +#define __TOOLCHAIN_NXFLAT_NXFLAT_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <sys/types.h> + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#define NXFLAT_MAX_STRING_SIZE 64 /* Largest size of string (w/zterminator) */ +#define NXFLAT_MAGIC "NxFT" /* NXFLAT magic number */ + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * The NXFLAT file header + * + * The elements within this structure are stored in network order (i.e., + * ntohs() and ntohl() should be used to access fields within the + * header. + ****************************************************************************/ + +struct nxflat_hdr_s + { + /* The "magic number" identifying the file type. This field should contain + * "NxFT". NOTE that there is no other versioning information other than + * this magic number. */ + + char h_magic[4]; + + /* The following fields provide the memory map for the nxflat binary. + * h_entry - Offset to the the first executable insruction from the + * beginning of the file. h_datastart - Offset to the beginning of the data + * segment from the beginning of the file. This field can also interpreted + * as the size of the ISpace segment. h_dataend - Offset to the end of the + * data segment from the beginning of the file. h_bssend - Offset to the + * end of bss segment from the beginning of the file. The text segment can + * be considered to be the contiguous (unrelocated) address space range + * from address zero through (but not including) h_datastart. The size of + * the data/bss segment includes (as a minimum) the data and bss regions + * (bss_end - data_start) as well as the size of the stack. At run time, + * this region will also include program arguments and environement + * variables. The bss segment is data_end through bss_end. */ + + u_int32_t h_entry; + u_int32_t h_datastart; + u_int32_t h_dataend; + u_int32_t h_bssend; + + /* Size of stack, in bytes */ + + u_int32_t h_stacksize; + + /* Relocation entries h_relocstart - Offset to the beginning of an array of + * relocation records (struct nxflat_reloc). The offset is relative to the + * start of the file h_reloccount - The number of relocation records in the + * arry */ + + u_int32_t h_relocstart; /* Offset of relocation records */ + u_int32_t h_reloccount; /* Number of relocation records */ + + /* Imported symbol table (NOTE no symbols are exported) h_importsymbols - + * Offset to the beginning of an array of imported symbol structures + * (struct nxflat_import). The h_importsymbols offset is relative to the + * beginning of the file. Each entry of the array contains an u_int32_t + * offset (again from the beginning of the file) to the name of a symbol + * string. This string is null-terminated. h_importcount - The number of + * records in the h_exportsymbols array. */ + + u_int32_t h_importsymbols; /* Offset to list of imported symbols */ + u_int16_t h_importcount; /* Number of imported symbols */ + }; + +/**************************************************************************** + * NXFLAT Relocation types. + * + * The relocation records are an array of the following type. + ****************************************************************************/ + +struct nxflat_reloc_s + { + u_int32_t r_info; /* Bit-encoded relocation info */ + }; + +/* Pack the type and the offset into one 32-bit value */ + +#define NXFLAT_RELOC(t,o) (((u_int32_t)((t) & 3) << 28) | ((o) & 0x1fffffff)) + +/* The top three bits of the relocation info is the relocation type (see the + * NXFLAT_RELOC_TYPE_* definitions below. This is an unsigned value. + */ + +#define NXFLAT_RELOC_TYPE(r) ((u_int32_t)(r) >> 28) + +/* The bottom 28 bits of the relocation info is the (non-negative) offset into + * the D-Space that needs the fixup. + */ + +#define NXFLAT_RELOC_OFFSET(r) ((u_int32_t)(r) & 0x1fffffff) + +/* These are possible values for the relocation type */ + +#define NXFLAT_RELOC_TYPE_NONE 0 /* Invalid relocation type */ +#define NXFLAT_RELOC_TYPE_TEXT 1 /* Symbol lies in .text region */ +#define NXFLAT_RELOC_TYPE_DATA 2 /* Symbol lies in .data region */ +#define NXFLAT_RELOC_TYPE_BSS 3 /* Symbol lies in .bss region */ +#define NXFLAT_RELOC_TYPE_NUM 4 + +/**************************************************************************** + * NXFLAT Imported symbol type + * + * The imported symbols are an array of the following type. The fields + * in each element are stored in native machine order. + ****************************************************************************/ + +struct nxflat_import_s + { + u_int32_t i_funcname; /* Offset to name of imported function */ + u_int32_t i_funcaddress; /* Resolved address of imported function */ + }; + +#endif /* __TOOLCHAIN_NXFLAT_NXFLAT_H */ + |