diff options
Diffstat (limited to 'nuttx/ChangeLog')
-rw-r--r-- | nuttx/ChangeLog | 40 |
1 files changed, 21 insertions, 19 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index ced68606b..3970e00ff 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -5710,8 +5710,8 @@ the interface in this case (2013-10-5). * net/netdev_router.c and net/uip/uip-arp.c: When the target IP address does not lie on the device's networker when we have a routing table, - looking the the correct router IP address to use in the ARP request. - In that case, we want the MAC address of the router, not of the the + looking the correct router IP address to use in the ARP request. + In that case, we want the MAC address of the router, not of the target endpoint (2013-10-5). * net/netdev_rxnotify.c and others: Use the new signature of rxnotify caused by the routing table. From Max Holtzberg (2013-10-6). @@ -6168,7 +6168,7 @@ the top of the loop not the bottom. Otherwise, we will do a bogus transfer with the out-of-range block before we test it (2013-12-05). -6.33 2014-xx-xx Gregory Nutt <gnutt@nuttx.org> +6.33 2014-01-30 Gregory Nutt <gnutt@nuttx.org> * arch/arm/include/a1x and src/a1x: Directory structure to support the Allwinner A10. Not much there on the initial check-in @@ -6208,7 +6208,7 @@ From Ken Pettit (2013-12-12) * arch/arm/src/a1x/chip/a1x_timer.h: Timer register bit definitions (incomplete on initial check-in) (2013-12-12). - * lbc/time/lib_strftime.c: Need null-termination on the the string + * lbc/time/lib_strftime.c: Need null-termination on the string generated by strftime(). From Max Holtzberg (2013-12-12). * sched/nanosleep.c and include/time.h: Add nanosleep() (2013-12-12). * libc/unistd/lib_sleep.c and lib_usleep.c. Move sleep() and @@ -6241,7 +6241,7 @@ * arch/arm/src/armv7-a/arm_head.h: Fix some errors in the cache invalidation logic (only seem to matter for Cortex-A8) (21-3-12-19). * Kconfig and all Make.defs files: Add CONFIG_DEBUG_NOOPT. Now - you can indepenently enable/disable debug symbols and optimization + you can independently enable/disable debug symbols and optimization (2013-12-20). * configs/README.txt and Documentation/NuttxPortingGuide.html: Remove documentation of NuttX configuration variables. Since @@ -6261,7 +6261,7 @@ * configs/stm3210e-eval/buttons: Converted to use kconfig-frontends tools (untested) (2013-12-22). * configs/Kconfig, configs/viewtool-stm32f107/include/board-stm32f103vct6.h, - and /board-stm32f107vct6.h: The viewtools board can now be configured + and /board-stm32f107vct6.h: The viewtool board can now be configured to support either the STM32F103VCT6 or the STM32F107VCT6 (2013-12-22). * configs/Kconfig, README.txt, viewtool-stm32f107/highpri, Kconfig, README.txt, and src/stm32_highpri.c: This is the initial framework @@ -6280,7 +6280,7 @@ and the name of the common vector handling logic so that the MCU- independent logic and work with these (2013-12-23). * configs/viewtool-stm32f107/scripts: Move the RAM vector tables to the - beginning of SRAM. It seems to require this alignament. Also, we + beginning of SRAM. It seems to require this alignment. Also, we don't need different scripts for the CMNVECTOR case now that the vector table has a common name. * arch/arm/src: armv-7/up_exception.S and xxx/xxx_vectors.S where @@ -6312,14 +6312,14 @@ pin definition that would prevent building USB for the connectivity and performance lines (2013-12-25). * stm32l15xxx_pinmap.h: Fix a typo in USB pin definitions (2013-12-25). - * configs/viewtools-stm32f107: Fix building of USB for F103 and F107. + * configs/viewtool-stm32f107: Fix building of USB for F103 and F107. F103 has device only; F107 has OTG FS (2013-12-25). * arch/arm/src/stm32/stm32f10xxx_rcc.c and chip/stm32f10xxx_rcc.h: Add clocking support for STM32F107 USB OTG FS (which does not work) (2013-12-26). * configs/viewtool-stm32f107: Updates to USB for F103 and USB OTG FS for F107 (2013-12-16). - * arch/arm/src/stm32/chip/stm32f3xxxx_pinmap.h: Fix pin definitioni names + * arch/arm/src/stm32/chip/stm32f3xxxx_pinmap.h: Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb (2013-12-27). * graphics/nxmu, nxsu, and nxglib and libc/nx, nxmu, and nxglib: Massive reshuffling of files with (hopefully) no logic changes. This @@ -6360,7 +6360,7 @@ Thomas Grubler (2014-1-2). * tools/configure.c and mkdeps.c: Fixes for Windows build issues from Max Holtzberg (2014-1-4). - * configs/olimex-stm32-p107/nsh/Make.defs: Add native Windoes build + * configs/olimex-stm32-p107/nsh/Make.defs: Add native Windows build support for the Olimex STM32 P107. From Max Holtzberg (2014-1-4). * Makefile.win: Changes for native Windows build: fix creation of a .version file if one does not exist. Make sure that the APPDIR @@ -6431,7 +6431,7 @@ * All of Jason Jiang's TCP write buffering logic is checked in. Unfortunately, it does not yet work (2013-1-14). * configs/px4fmu-v2_upstream: Configuration for testing simple - configurations on the the PX4FMU v2. This version is incomplete + configurations on the PX4FMU v2. This version is incomplete for the PX4 application and is not a replacement for the version in the PX4 GIT repository. * fs/fat/fs_fat32.c: A correction to FAT cluster allocation from @@ -6440,7 +6440,7 @@ then the socket-related write buffering information must copied with the other cloned socket data (2014-1-14). * net/net_close.c: If CONFIG_NET_TCP_WRITE_BUFFERS is selected, - then it is necessary to free the write buffere callback structure + then it is necessary to free the write buffer callback structure when the socket is closed (2014-1-14). * fs/fat/fs_fat32.c: Fix some root directory logic that was conditionally done only for FAT 32. Apparently this needs to @@ -6450,7 +6450,7 @@ implementations of up_maskack_irq() for all Cortex-M architectures: Do not disable and enable the IRQ on each interrupt. Because (1) interrupts are already disabled on interrupt entry, (2) this - interferes with controlling the IRQ interrrupt setting from interrupt + interferes with controlling the IRQ interrupt setting from interrupt handlers, and (3) up_disable_irq() does not work anyway so that this has never done anything (2014-1-15). * All implementations of up_disable_irq() for all Cortex-M3 and M4 @@ -6461,7 +6461,7 @@ not work; writing a '0' to the ISER register has no effect. That means that up_disable_irq() was doing nothing! It turns out that that is not really important because up_disable_irq() is not really used - for that purpose. But some spurions STM32 ADC interrupts have been + for that purpose. But some spurious STM32 ADC interrupts have been reported to me and this turned out to be the cause in that case. My concern now that up_disable_irq() works is that there may now be unmasked bugs that leave devices in the disabled state? Thanks to @@ -6478,7 +6478,7 @@ source the Kconfig file from the custom board directory (2014-1-16). * Makefile.unix, Makefile.win, and configs/Kconfig: After thinking a little harder, I re-implemented the backed-out custom configuration - feature. The new version does not have bad side-effect (1) (but stil + feature. The new version does not have bad side-effect (1) (but still has bad side-effect (2)) (2014-1-16). * arch/x86/Kconfig and configs/qemu-i486/nsh/Make.defs and ostest/Make.defs: Add a configuration option to select the -m32 @@ -6486,8 +6486,8 @@ compiler (2014-1-18). * include/ctype.h: Typo in macro name: iscntrl, not iscontrol (2104-1-17) * libc/unistd/lib_getopt.c: If there are no arguments (argc == 1), then - getopt() make like the optind variable in an undefined state (2014-1-20). - * configs/olimex-stm32-p107: Failes to build is SPI3 for UEXT is not + getopt() will leave the optind variable in an undefined state (2014-1-20). + * configs/olimex-stm32-p107: Fails to build if SPI3 for UEXT is not remapped. From Max Holtzberg (2014-1-21). * Several network related files: Changes from Max Holtzberg to improve how network status is reported. New controls to manage carrier @@ -6501,7 +6501,7 @@ * /arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran (2014-1-23). * arch/arm/src/efm32 and include/efm32: Basic support for the EFM3 - processor family from Richarc Cochran (2014-1-23). + processor family from Richard Cochran (2014-1-23). * configs/efm32-dk3650: This is Energy Micro's development kit for the Leopard Gecko MCU, which is an ARM Cortex-M3 device. From Richard Cochran (2014-1-23). @@ -6522,7 +6522,7 @@ to fix 'Error: .size expression for idle_stack does not evaluate to a constant" (2014-1-25). * arch/arm/include/efm32, arch/arm/src/efm32, and configs/efm32-dk360: - Removed all EFM32 support. Not yet readyto be fielded (2014-1-27). + Removed all EFM32 support. Not yet ready to be fielded (2014-1-27). * arch/arm/src/armv7-a/arm_head.S, sama5/sam_boot.c, and several other files: Now supports execution from NOR FLASH with .data and .bss in SDRAM. This was not possible prior to this because .bss and .data @@ -6533,3 +6533,5 @@ original, efficient logic violated the ARM C ABI. It was okay when called from boot logic, but not when called from C logic. This fixes bugginess reported on 2014-1-28. (2014-1-29). + +6.34 2014-xx-xx Gregory Nutt <gnutt@nuttx.org> |