diff options
Diffstat (limited to 'nuttx/configs/lm3s8962-ek/README.txt')
-rw-r--r-- | nuttx/configs/lm3s8962-ek/README.txt | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/nuttx/configs/lm3s8962-ek/README.txt b/nuttx/configs/lm3s8962-ek/README.txt index fdb783466..0f796e38d 100644 --- a/nuttx/configs/lm3s8962-ek/README.txt +++ b/nuttx/configs/lm3s8962-ek/README.txt @@ -181,13 +181,13 @@ IDEs 2) Start the NuttX build at least one time from the Cygwin command line before trying to create your project. This is necessary to create certain auto-generated files and directories that will be needed. - 3) Set up include pathes: You will need include/, arch/arm/src/lm3s, + 3) Set up include pathes: You will need include/, arch/arm/src/lm, arch/arm/src/common, arch/arm/src/armv7-m, and sched/. 4) All assembly files need to have the definition option -D __ASSEMBLY__ on the command line. Startup files will probably cause you some headaches. The NuttX startup file - is arch/arm/src/lm3s/lm3s_vectors.S. + is arch/arm/src/lm/lm_vectors.S. NuttX EABI "buildroot" Toolchain ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -341,7 +341,7 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory - CONFIG_ARCH_CHIP=lm3s + CONFIG_ARCH_CHIP=lm CONFIG_ARCH_CHIP_name - For use in C code to identify the exact chip: @@ -436,7 +436,7 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options to build the LM3S Ethernet driver CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide - a MAC address (via lm3s_ethernetmac()), then this should be selected. + a MAC address (via lm_ethernetmac()), then this should be selected. CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding |