diff options
Diffstat (limited to 'nuttx/configs/sam4l-xplained/src/sam4l-xplained.h')
-rw-r--r-- | nuttx/configs/sam4l-xplained/src/sam4l-xplained.h | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/nuttx/configs/sam4l-xplained/src/sam4l-xplained.h b/nuttx/configs/sam4l-xplained/src/sam4l-xplained.h index 9e7a0f4ac..a9b5498b3 100644 --- a/nuttx/configs/sam4l-xplained/src/sam4l-xplained.h +++ b/nuttx/configs/sam4l-xplained/src/sam4l-xplained.h @@ -103,6 +103,75 @@ GPIO_PORTC | GPIO_PIN24) #define IRQ_SW0 SAM_IRQ_PC24 +/* LCD1 + * + * EXT5 SAM4L BOARD LCD1 SHARED + * PIN PIN FUNCTION FUNCTION WITH + * 1 PA09 COM3 COM3 EXT3 + * 2 PA10 COM2 COM2 EXT3 + * 3 PA11 COM1 COM1 EXT4 + * 4 PA12 COM0 COM0 EXT4 + * 5 PC15 SEG0 SEG0 EXT3 + * 6 PC16 SEG1 SEG1 EXT3 + * 7 PC17 SEG2 SEG2 EXT4 + * 8 PC18 SEG3 SEG3 EXT4 + * 9 PC19 SEG4 SEG4 + * 10 PA13 SEG5 SEG5 EXT4 + * 11 PA14 SEG6 SEG6 + * 12 PA15 SEG7 SEG7 EXT4 + * 13 PA16 SEG8 SEG8 EXT4 + * 14 PA17 SEG9 SEG9 EXT3 + * 15 PC20 SEG10 SEG10 + * 16 PC21 SEG11 SEG11 + * 17 PC22 SEG12 SEG12 + * 18 PC23 SEG13 SEG13 + * 19 PB08 SEG14 SEG14 + * 20 PB09 SEG15 SEG15 + * 21 PB10 SEG16 SEG16 EXT2 + * 22 PB11 SEG17 SEG17 EXT2 + * 23 PA18 SEG18 SEG18 EXT3-4 + * 24 PA19 SEG19 SEG19 EXT3-4 + * 25 PA20 SEG20 SEG20 EXT3-4 + * 26 PB07 SEG21 SEG21 + * 27 PB06 SEG22 SEG22 + * 28 PA08 SEG23 SEG32 EXT3 + * 29 PC24 SEG24 N/C + * 30 PC25 SEG25 N/C EXT1 + * 31 PC26 SEG26 N/C EXT2-3 + * 32 PC27 SEG27 N/C EXT2-3 + * 33 PC28 SEG28 N/C + * 34 PC29 SEG29 N/C + * 35 PC30 SEG30 N/C EXT1-2 + * 36 PC31 SEG31 N/C + * 37 PB12 SEG32 N/C EXT1 + * 38 PB13 SEG33 N/C EXT1 + * 39 PA21 SEG34 N/C EXT1-2 + * 40 PA22 SEG35 N/C EXT1-2 + * 41 PB14 SEG36 N/C EXT2-4 + * 42 PB15 SEG37 N/C EXT2-4 + * 43 PA23 SEG38 N/C EXT1 + * 44 PA24 SEG39 N/C EXT1 + * 45 --- N/C N/C + * 46 --- N/C N/C + * 47 --- VCC_P3V3 BL V+ + * 48 --- GND BL V- + * 49 PC05 BL BL CTRL EXT2 + * 50 --- ID ID + * 51 --- GND GND + * + * The backlight control is active high. + */ + +#ifdef CONFIG_SAM4L_XPLAINED_SLCD1MODULE + +# ifndef CONFIG_SAM34_LCDCA +# error CONFIG_SAM34_LCDCA is required to use the LCD1 module +# endif + +# define GPIO_LCD1_BL (GPIO_OUTPUT | GPIO_PULL_NONE | GPIO_OUTPUT_CLEAR | \ + GPIO_PORTC | GPIO_PIN5) +#endif + /* I/O1 * * Support for the microSD card slot on the I/O1 module. The I/O1 requires @@ -125,6 +194,10 @@ # if defined(CONFIG_SAM4L_XPLAINED_IOMODULE_EXT1) +# if defined(SAM4L_XPLAINED_OLED1MODULE) && defined(SAM4L_XPLAINED_OLED1MODULE_EXT1) +# error I/O1 and OLED1 cannot both reside in EXT1 +# endif + # define GPIO_SD_CD (GPIO_INTERRUPT | GPIO_INT_CHANGE | GPIO_PULL_UP | \ GPIO_GLITCH_FILTER | GPIO_PORTB | GPIO_PIN13) # define IRQ_SD_CD SAM_IRQ_PB13 @@ -134,6 +207,15 @@ # define SD_CSNO 0 # elif defined(CONFIG_SAM4L_XPLAINED_IOMODULE_EXT2) + +# ifndef CONFIG_SAM4L_XPLAINED_SLCD1MODULE +# error I/O1 cannot be in EXT2 if the LCD1 module is connected +# endif + +# if defined(SAM4L_XPLAINED_OLED1MODULE) && defined(SAM4L_XPLAINED_OLED1MODULE_EXT2) +# error I/O1 and OLED1 cannot both reside in EXT2 +# endif + # define GPIO_CD (GPIO_INTERRUPT | GPIO_INT_CHANGE | GPIO_PULL_UP | \ GPIO_GLITCH_FILTER | GPIO_PORTC | GPIO_PIN9) # define IRQ_CD SAM_IRQ_PC9 |