diff options
Diffstat (limited to 'nuttx/configs/stm3210e-eval/README.txt')
-rwxr-xr-x | nuttx/configs/stm3210e-eval/README.txt | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/nuttx/configs/stm3210e-eval/README.txt b/nuttx/configs/stm3210e-eval/README.txt index e08d0bfa5..7e23d7dc9 100755 --- a/nuttx/configs/stm3210e-eval/README.txt +++ b/nuttx/configs/stm3210e-eval/README.txt @@ -504,7 +504,10 @@ STM3210E-EVAL-specific Configuration Options each of the four channels with different duty cycles. That capability is not supported by this driver: Only one output channel per timer. - Alternate pin mappings (should not be used with the STM3210E-EVAL board): + Alternate pin mappings. The STM3210E-EVAL board requires only CAN1 remapping + On the STM3210E-EVAL board pin PB9 is wired as TX and pin PB8 is wired as RX. + Which then makes the proper connection through the CAN transiver SN65HVD230 + out to the CAN D-type 9-pn male connector where pin 2 is CANL and pin 7 is CANH. CONFIG_STM32_TIM1_FULL_REMAP CONFIG_STM32_TIM1_PARTIAL_REMAP |