path: root/nuttx/arch/arm/src/lpc17xx/Kconfig

#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

comment "LPC17xx Configuration Options"

choice
	prompt "NXP LPC17XX Chip Selection"
	default ARCH_CHIP_LPC1768
	depends on ARCH_CHIP_LPC17XX

config ARCH_CHIP_LPC1751
	bool "LPC1751"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1752
	bool "LPC1752"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1754
	bool "LPC1754"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1756
	bool "LPC1756"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1758
	bool "LPC1758"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1759
	bool "LPC1759"
	select ARCH_FAMILY_LPC175X

config ARCH_CHIP_LPC1764
	bool "LPC1764"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1765
	bool "LPC1765"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1766
	bool "LPC1766"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1767
	bool "LPC1767"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1768
	bool "LPC1768"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1769
	bool "LPC1769"
	select ARCH_FAMILY_LPC176X

config ARCH_CHIP_LPC1773
	bool "LPC1773"
	select ARCH_FAMILY_LPC177X
	select ARCH_HAVE_SPIFI

config ARCH_CHIP_LPC1774
	bool "LPC1774"
	select ARCH_FAMILY_LPC177X

config ARCH_CHIP_LPC1776
	bool "LPC1776"
	select ARCH_FAMILY_LPC177X

config ARCH_CHIP_LPC1777
	bool "LPC1777"
	select ARCH_FAMILY_LPC177X

config ARCH_CHIP_LPC1778
	bool "LPC1778"
	select ARCH_FAMILY_LPC177X

config ARCH_CHIP_LPC1785
	bool "LPC1785"
	select ARCH_FAMILY_LPC178X

config ARCH_CHIP_LPC1786
	bool "LPC1786"
	select ARCH_FAMILY_LPC178X

config ARCH_CHIP_LPC1787
	bool "LPC1787"
	select ARCH_FAMILY_LPC178X

config ARCH_CHIP_LPC1788
	bool "LPC1788"
	select ARCH_FAMILY_LPC178X

endchoice

config ARCH_FAMILY_LPC175X
	bool

config ARCH_FAMILY_LPC176X
	bool

config ARCH_FAMILY_LPC177X
	bool

config ARCH_FAMILY_LPC178X
	bool

config ARCH_HAVE_SPIFI
	bool

menu "LPC17xx Peripheral Support"

config LPC17_MAINOSC
	bool "Main oscillator"
	default y

config LPC17_PLL0
	bool "PLL0"
	default y

config LPC17_PLL1
	bool "PLL1"
	default y

config LPC17_EMC
	bool "EMC"
	default y
	depends on ARCH_FAMILY_LPC178X
	select ARCH_HAVE_EXTNAND
	select ARCH_HAVE_EXTSRAM0
	select ARCH_HAVE_EXTDRAM
	select ARCH_HAVE_EXTNOR

config LPC17_ETHERNET
	bool "Ethernet"
	select NETDEVICES
	select ARCH_HAVE_PHY
	default n

config LPC17_LCD
	bool "LCD controller"
	default n
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X

config LPC17_USBHOST
	bool "USB host"
	select USBHOST
	default n

config LPC17_USBDEV
	bool "USB Device"
	select USBDEV
	default n

config LPC17_USBOTG
	bool "USB OTG"
	default n
	depends on LPC17_USBHOST && LPC17_USBDEV

config LPC17_SDCARD
	bool "SD Card Interface"
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X
	select ARCH_HAVE_SDIO
	default n

config LPC17_UART0
	bool "UART0"
	select ARCH_HAVE_UART0
	default n

config LPC17_UART1
	bool "UART1"
	select ARCH_HAVE_UART1
	default n

config LPC17_UART2
	bool "UART2"
	select ARCH_HAVE_UART2
	default n

config LPC17_UART3
	bool "UART3"
	select ARCH_HAVE_UART3
	default n

config LPC17_UART4
	bool "UART4"
	select ARCH_HAVE_UART4
	default n

config LPC17_CAN1
	bool "CAN1"
	select ARCH_HAVE_UART4
	default n

config LPC17_CAN2
	bool "CAN2"
	default n

config LPC17_SPI
	bool "SPI"
	default n
	depends on ARCH_FAMILY_LPC175X || ARCH_FAMILY_LPC176X

config LPC17_SSP0
	bool "SSP0"
	default n

config LPC17_SSP1
	bool "SSP1"
	default n

config LPC17_SSP2
	bool "SSP1"
	default n
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X

config LPC17_SPIFI
	bool "SPIFI Interface"
	depends on ARCH_HAVE_SPIFI
	default n

config LPC17_I2C0
	bool "I2C0"
	default n

config LPC17_I2C1
	bool "I2C1"
	default n

config LPC17_I2C2
	bool "I2C2"
	default n

config LPC17_I2S
	bool "I2S"
	default n

config LPC17_TMR0
	bool "Timer 0"
	default n

config LPC17_TMR1
	bool "Timer 1"
	default n

config LPC17_TMR2
	bool "Timer 2"
	default n

config LPC17_TMR3
	bool "Timer 3"
	default n

config LPC17_RIT
	bool "RIT"
	default n

config LPC17_PWM0
	bool "PWM0"
	default n

config LPC17_PWM1
	bool "PWM1"
	default n
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X

config LPC17_MCPWM
	bool "MCPWM"
	default n
	depends on ARCH_FAMILY_LPC175X || ARCH_FAMILY_LPC176X

config LPC17_QEI
	bool "QEI"
	default n

config LPC17_RTC
	bool "RTC"
	default n

config LPC17_RTCEV
	bool "RTC event monitor"
	default n
	depends on LPC17_RTC

config LPC17_WDT
	bool "WDT"
	default n

config LPC17_ADC
	bool "ADC"
	default n

config LPC17_DAC
	bool "DAC"
	default n

config LPC17_GPDMA
	bool "GPDMA"
	default n
	select ARCH_DMA

config LPC17_CRC
	bool "CRC engine"
	default n
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X

config LPC17_FLASH
	bool "FLASH"
	default n

config LPC17_EEPROM
	bool "EEPROM"
	default n
	depends on ARCH_FAMILY_LPC177X || ARCH_FAMILY_LPC178X

endmenu

menu "External Memory Configuration"

config ARCH_HAVE_EXTNAND
	bool

config ARCH_HAVE_EXTNOR
	bool

config ARCH_HAVE_EXTDRAM
	bool

config ARCH_HAVE_EXTSRAM0
	bool

config LPC17_EXTNAND
	bool "Configure external NAND"
	default n
	depends on ARCH_HAVE_EXTNAND
	---help---
		Configure external NAND memory and, if applicable, map then external
		NAND into the memory map.

if LPC17_EXTNAND

config LPC17_EXTNANDSIZE
	int "External NAND size"
	default 0
	---help---
		Size of the external NAND in bytes.

endif

config LPC17_EXTNOR
	bool "Configure external NOR memory"
	default n
	depends on ARCH_HAVE_EXTNOR
	---help---
		Configure external NOR memory and, if applicable, map then external
		NOR into the memory map.

if LPC17_EXTNOR

config LPC17_EXTNORSIZE
	int "External NOR size"
	default 0
	---help---
		Size of the external NOR in bytes.

endif

config LPC17_EXTDRAM
	bool "Configure external DRAM"
	default n
	depends on ARCH_HAVE_EXTDRAM
	select ARCH_HAVE_SDRAM
	---help---
		Configure external DRAM memory and, if applicable, map then external
		DRAM into the memory map.

if LPC17_EXTDRAM

config LPC17_EXTDRAMSIZE
	int "External SDRAM size"
	default 0
	---help---
		Size of the external SDRAM in bytes.

choice
	prompt "SDRAM Width Selection"
	default LPC17_SDRAM_16BIT

config LPC17_SDRAM_8BIT
	bool "8-bit"

config LPC17_SDRAM_16BIT
	bool "16-bit"

config LPC17_SDRAM_32BIT
	bool "32-bit"

endchoice

config LPC17_EXTDRAMHEAP
	bool "Add external SDRAM to the heap"
	default y
	---help---
		Add the external SDRAM into the heap.

endif

config LPC17_EXTSRAM0
	bool "Configure external SRAM (Bank 0)"
	default n
	depends on ARCH_HAVE_EXTSRAM0
	---help---
		Configure external SRAM Bank 0 memory and, if applicable, map then
		external SRAM Bank 0 into the memory map.

if LPC17_EXTSRAM0

config LPC17_EXTSRAM0SIZE
	int "External SRAM size"
	default 0
	---help---
		Size of the external SRAM Bank 0 in bytes.

config LPC17_EXTSRAM0HEAP
	bool "Add external SRAM (Bank 0) to the heap"
	default y
	---help---
		Add external SRAM Bank 0 into the heap.

endif
endmenu

menu "Serial driver options"
	depends on LPC17_UART0 || LPC17_UART1 || LPC17_UART2 || LPC17_UART3 || LPC17_UART4

config SERIAL_TERMIOS
	bool "Serial driver TERMIOS supported"
	depends on LPC17_UART0 || LPC17_UART1 || LPC17_UART2 || LPC17_UART3
	default n
	---help---
		Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
		If this is not defined, then the terminal settings (baud, parity, etc).
		are not configurable at runtime; serial streams cannot be flushed, etc..

config UART1_RINGINDICATOR
	bool "UART1 ring indicator"
	depends on LPC17_UART1
	default n
	---help---
		Enable UART1 ring indicator

endmenu

menu "ADC driver options"
	depends on LPC17_ADC

config ADC0_AVERAGE
	int "ADC0 average"
	default 200

config ADC0_MASK
	int "ADC0 mask"
	default 1

config ADC0_SPS
	int "ADC0 SPS"
	default 1000

config ADC_CHANLIST
	bool "Use ADC channel list"
	default n
	---help---
		The errata that states: "A/D Global Data register should not be used
		with burst mode or hardware triggering".  If this option is selected,
		then the ADC driver will grab from the individual channel registers
		rather than from the global data register as this is the stated
		workaround in the errata.

		The ADC interrupt will trigger on conversion complete on the last
		channel listed in the array g_adc_chanlist[] (as opposed to
		triggering interrupt from the global DONE flag).

		If this option is enabled, then the platform specific code must do
		two things:  (1) define ADC_NCHANNELS in the configuration file and
		(2) provide an array g_adc_chanlist[] with the channel numbers
		matching the ADC0_MASK within the board-specific library.

config ADC_NCHANNELS
	int "ADC0 number of channels"
	depends on ADC_CHANLIST
	default 0
	---help---
		If ADC_CHANLIST is enabled, then the platform specific code
		must do two things:  (1) define ADC_NCHANNELS in the configuration
		file and (2) provide an array g_adc_chanlist[] with the channel
		numbers matching the ADC0_MASK within the board-specific library.

endmenu

menu "CAN driver options"
	depends on LPC17_CAN1 || LPC17_CAN2

config CAN_EXTID
	bool "CAN extended IDs"
	default n
	---help---
		Enables support for the 29-bit extended ID.  Default Standard 11-bit IDs.

config CAN1_BAUD
	int "CAN1 BAUD"
	depends on LPC17_CAN1
	---help---
		CAN1 BAUD rate.  Required if LPC17_CAN1 is defined.

config CAN2_BAUD
	int "CAN2 BAUD"
	depends on LPC17_CAN2
	---help---
		CAN2 BAUD rate.  Required if LPC17_CAN2 is defined.

config CAN1_DIVISOR
	int "CAN1 CCLK divisor"
	depends on LPC17_CAN1
	default 4
	---help---
		CAN1 is clocked at CCLK divided by this number. (the CCLK frequency is divided
		by this number to get the CAN clock). Options = {1,2,4,6}. Default: 4.

config CAN2_DIVISOR
	int "CAN2 CCLK divisor"
	depends on LPC17_CAN2
	default 4
	---help---
		CAN2 is clocked at CCLK divided by this number. (the CCLK frequency is divided
		by this number to get the CAN clock). Options = {1,2,4,6}. Default: 4.

config CAN_TSEG1
	int "TSEG1 quanta"
	default 6
	---help---
		The number of CAN time quanta in segment 1. Default: 6

config CAN_TSEG2
	int "TSEG2 quanta"
	default 4
	---help---
		The number of CAN time quanta in segment 2. Default: 7

config CAN_SAM
	bool "CAN sampling"
	default n
	---help---
		The bus is sampled 3 times (recommended for low to medium speed buses to spikes on the bus-line).

config CAN_LOOPBACK
	bool "CAN looopback mode"
	default n
	---help---
		Enable CAN loopback mode

config CAN_REGDEBUG
	bool "Register level debug"
	depends on DEBUG
	default n
	---help---
		Output detailed register-level CAN debug information.  Requires also DEBUG and DEBUG_CAN.

endmenu

config GPIO_IRQ
	bool "GPIO interrupt support"
	default n
	---help---
		Enable support for GPIO interrupts

menu "I2C driver options"
	depends on LPC17_I2C0 || LPC17_I2C1 || LPC17_I2C2

config I2C0_FREQ
	int "I2C0 frequency"
	depends on LPC17_I2C0
	default 100000

config I2C1_FREQ
	int "I2C1 frequency"
	depends on LPC17_I2C1
	default 100000

config I2C2_FREQ
	int "I2C2 frequency"
	depends on LPC17_I2C2
	default 100000

endmenu

menu "SDIO Configuration"
	depends on LPC17_SDCARD

config SDIO_DMA
	bool "Support DMA data transfers"
	default y if LPC17_GPDMA
	depends on LPC17_GPDMA
	---help---
		Support DMA data transfers.
		Enable SD card DMA data transfers.  This is a marginally optional.
		For most usages, SD accesses will cause data overruns if used without
		DMA.  Requires LPC17_SDCARD and config LPC17_GPDMA.

config SDIO_DMAPRIO
	hex "SDIO DMA priority"
	default 0x0
	depends on LPC17_GPDMA
	---help---
		Select SDIO DMA prority.

config SDIO_WIDTH_D1_ONLY
	bool "Use D1 only"
	default n
	---help---
		Select 1-bit transfer mode.  This may be selected to force the driver
		operate with only a single data line (the default is to use all
		4 SD data lines).Default: 4-bit transfer mode.

endmenu

menu "Ethernet driver options"
	depends on LPC17_ETHERNET

config PHY_AUTONEG
	bool "Autonegiation"
	---help---
		Enable auto-negotion

config PHY_SPEED100
	bool "100Mbit/Sec"
	depends on !PHY_AUTONEG
	---help---
		Select 100Mbit vs. 10Mbit speed.

config PHY_FDUPLEX
	bool "Full duplex"
	depends on !PHY_AUTONEG
	---help---
		Select full (vs. half) duplex

config NET_EMACRAM_SIZE
	int "EMAC RAM Size"
	default 16384
	---help---
		Size of EMAC RAM.  Default: 16384 bytes

config NET_NTXDESC
	int "Number of Tx descriptors"
	default 18
	---help---
		Configured number of Tx descriptors. Default: 18

config NET_NRXDESC
	int "Number of Rx descriptors"
	default 18
	---help---
		Configured number of Rx descriptors. Default: 18

config NET_PRIORITY
	int "Ethernet interrupt priority"
	default 128
	depends on ARCH_IRQPRIO && EXPERIMENTAL
	---help---
		Ethernet interrupt priority.  The default is the default priority (128).

config NET_WOL
	bool "Wake-up on LAN"
	default n
	---help---
		Enable Wake-up on Lan (not fully implemented).

config NET_REGDEBUG
	bool "Ethernet register-level debug"
	depends on DEBUG
	default n
	---help---
		Enable low level register debug.  Also needs DEBUG.

config NET_HASH
	bool "Hashing"
	default n
	---help---
		Enable receipt of near-perfect match frames.

config NET_MULTICAST
	bool "Multicast"
	default y if NET_IGMP
	default n if !NET_IGMP
	---help---
		Enable receipt of multicast (and unicast) frames. Automatically set
		if NET_IGMP is selected.

endmenu

menu "LCD device driver options"
	depends on LPC17_LCD

config LPC17_LCD_VRAMBASE
	hex "Video RAM base address"
	default 0xa0010000
	---help---
		Base address of the video RAM frame buffer.  The default is
		(LPC17_EXTDRAM_CS0 + 0x00010000)

config LPC17_LCD_REFRESH_FREQ
	int "LCD refesh rate (Hz)"
	default 50
	---help---
		LCD refesh rate (Hz)

config LPC17_LCD_BACKLIGHT
	bool "Enable backlight"
	default y
	---help---
		Enable backlight support.  If LPC17_LCD_BACKLIGHT is selected, then
		the board-specific logic must provide this lpc17_backlight()
		interface so that the LCD driver can turn the backlight on and off
		as necessary.  You should select this option and implement
		lpc17_backlight() if your board provides GPIO control over the
		backlight.  This interface provides only ON/OFF control of the
		backlight.  If you want finer control over the backlight level (for
		example, using PWM), then this interface would need to be extended.

config LPC17_LCD_TFTPANEL
	bool "TFT Panel"
	default y
	---help---
		TFT Panel vs. STN display.  STN display panels require algorithmic
		pixel pattern generation to provide pseudo gray scaling on
		monochrome displays, or color creation on color displays.  TFT
		display panels require the digital color value of each pixel to be
		applied to the display data inputs.

config LPC17_LCD_MONOCHROME
	bool "Monochrome LCD"
	default n
	depends on !LPC17_LCD_TFTPANEL
	---help---
		STN LCD monochrome/color selection.  Selects monochrome LCD.  This
		selection has no meaning for a TFT panel.

choice
	prompt "Bits per pixel"
	default LPC17_LCD_BPP24 if LPC17_LCD_TFTPANEL
	default LPC17_LCD_BPP16_565 if !LPC17_LCD_TFTPANEL

config LPC17_LCD_BPP1
	bool "1 bit per pixel"

config LPC17_LCD_BPP2
	bool "2 bit per pixel"

config LPC17_LCD_BPP4
	bool "4 bit per pixel"

config LPC17_LCD_BPP8
	bool "8 bit per pixel"

config LPC17_LCD_BPP16
	bool "16 bit per pixel"
	depends on !LPC17_LCD_MONOCHROME

config LPC17_LCD_BPP24
	bool "24 bit per pixel"
	depends on LPC17_LCD_TFTPANEL

config LPC17_LCD_BPP16_565
	bool "16 bpp, 5:6:5 mode"
	depends on !LPC17_LCD_MONOCHROME

config LPC17_LCD_BPP12_444
	bool "12 bpp, 4:4:4 mode"
	depends on !LPC17_LCD_MONOCHROME

endchoice

config LPC17_LCD_BACKCOLOR
	hex "Initial background color"
	default 0x0
	---help---
		Initial background color

config LPC17_LCD_HWIDTH
	int "Display width (pixels)"
	default 480
	---help---
		Horizontal width the display in pixels

config LPC17_LCD_HPULSE
	int "Horizontal pulse"
	default 2

config LPC17_LCD_HFRONTPORCH
	int "Horizontal front porch"
	default 5

config LPC17_LCD_HBACKPORCH
	int "Horizontal back porch"
	default 40

config LPC17_LCD_VHEIGHT
	int "Display height (rows)"
	default 272
	---help---
		Vertical height of the display in rows

config LPC17_LCD_VPULSE
	int "Vertical pulse"
	default 2

config LPC17_LCD_VFRONTPORCH
	int "Vertical front porch"
	default 8

config LPC17_LCD_VBACKPORCH
	int "Vertical back porch"
	default 8

endmenu

menu "USB device driver options"
	depends on LPC17_USBDEV

config LPC17_USBDEV_EP0_MAXSIZE
	int "EP0 Max packet size"
	default 64
	---help---
		Endpoint 0 maximum packet size.  Default: 64

config LPC17_USBDEV_FRAME_INTERRUPT
	bool "USB frame interrupt"
	default n
	---help---
		Handle USB Start-Of-Frame events.  Enable reading SOF from interrupt
		handler vs. simply reading on demand. Probably a bad idea... Unless
		there is some issue with sampling the SOF from hardware asynchronously.

config LPC17_USBDEV_EPFAST_INTERRUPT
	bool "EP fast interrupt handling"
	default n
	---help---
		Enable high priority interrupts.  I have no idea why you might want to do that

config LPC17_USBDEV_NDMADESCRIPTORS
	int "Number of DMA descriptors"
	default 8
	---help---
		Number of DMA descriptors to allocate in SRAM.  Default: 8

config LPC17_USBDEV_DMA
	bool "Enable USB device DMA"
	default n
	---help---
		Enable lpc17xx-specific DMA support

config LPC17_USBDEV_NOVBUS
	bool "Disable VBUS support"
	default n
	---help---
		Define if the hardware implementation does not support the VBUS signal

config LPC17_USBDEV_NOLED
	bool "Disable USB device LCD support"
	default n
	---help---
		Define if the hardware implementation does not support the LED output

config LPC17_USBDEV_REGDEBUG
	bool "Register level debug"
	depends on DEBUG
	default n
	---help---
		Output detailed register-level USB device debug information.  Requires also DEBUG.

endmenu

menu "USB host driver options"
	depends on LPC17_USBHOST

config USBHOST_OHCIRAM_SIZE
	int "OHCI RAM Size"
	default 16384
	---help---
		Total size of OHCI RAM (in AHB SRAM Bank 1).  Default: 16384

config USBHOST_NEDS
	int "Number of Endpoint Descriptors"
	default 2
	---help---
		Number of endpoint descriptors.  Default: 2

config USBHOST_NTDS
	int "Number of transfer descriptors"
	default 3
	---help---
		Number of transfer descriptors. Default: 3

config USBHOST_TDBUFFERS
	int "Number of descriptor buffers"
	default 2
	---help---
		Number of transfer descriptor buffers.  Default: 2

config USBHOST_TDBUFSIZE
	int "Descriptor buffer size"
	default 128
	---help---
		Size of one transfer descriptor buffer.  Default 128

config USBHOST_IOBUFSIZE
	int "I/O buffer size"
	default 512
	---help---
		Size of one end-user I/O buffer.  This can be zero if the application
		can guarantee that all end-user I/O buffers reside in AHB SRAM.

config USBHOST_BULK_DISABLE
	bool "Disable bulk EPs"
	default n
	---help---
		Disable support for bulk endpoints.

config USBHOST_INT_DISABLE
	bool "Disable interupt EPs"
	default n
	---help---
		Disable support for interrupt endpoints.

config USBHOST_ISOC_DISABLE
	bool "Disable isochronous EPs"
	default n
	---help---
		Disable support for isochronous endpoints.

config LPC17_USBHOST_REGDEBUG
	bool "Register level debug"
	depends on DEBUG
	default n
	---help---
		Output detailed register-level USB host debug information.  Requires also DEBUG.

endmenu