1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
|
/************************************************************************************
* arch/arm/src/stm32/chip/stm32_rcc.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32_RRC_H
#define __ARCH_ARM_SRC_STM32_CHIP_STM32_RRC_H
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define STM32_RCC_CR_OFFSET 0x0000 /* Clock control register */
#define STM32_RCC_CFGR_OFFSET 0x0004 /* Clock configuration register */
#define STM32_RCC_CIR_OFFSET 0x0008 /* Clock interrupt register */
#define STM32_RCC_APB2RSTR_OFFSET 0x000c /* APB2 Peripheral reset register */
#define STM32_RCC_APB1RSTR_OFFSET 0x0010 /* APB1 Peripheral reset register */
#define STM32_RCC_AHBENR_OFFSET 0x0014 /* AHB Peripheral Clock enable register */
#define STM32_RCC_APB2ENR_OFFSET 0x0018 /* APB2 Peripheral Clock enable register */
#define STM32_RCC_APB1ENR_OFFSET 0x001c /* APB1 Peripheral Clock enable register */
#define STM32_RCC_BDCR_OFFSET 0x0020 /* Backup domain control register */
#define STM32_RCC_CSR_OFFSET 0x0024 /* Control/status register */
/* Register Addresses ***************************************************************/
#define STM32_RCC_CR (STM32_RCC_BASE+STM32_RCC_CR_OFFSET)
#define STM32_RCC_CFGR (STM32_RCC_BASE+STM32_RCC_CFGR_OFFSET)
#define STM32_RCC_CIR (STM32_RCC_BASE+STM32_RCC_CIR_OFFSET)
#define STM32_RCC_APB2RSTR (STM32_RCC_BASE+STM32_RCC_APB2RSTR_OFFSET)
#define STM32_RCC_APB1RSTR (STM32_RCC_BASE+STM32_RCC_APB1RSTR_OFFSET)
#define STM32_RCC_AHBENR (STM32_RCC_BASE+STM32_RCC_AHBENR_OFFSET)
#define STM32_RCC_APB2ENR (STM32_RCC_BASE+STM32_RCC_APB2ENR_OFFSET)
#define STM32_RCC_APB1ENR (STM32_RCC_BASE+STM32_RCC_APB1ENR_OFFSET)
#define STM32_RCC_BDCR (STM32_RCC_BASE+STM32_RCC_BDCR_OFFSET)
#define STM32_RCC_CSR (STM32_RCC_BASE+STM32_RCC_CSR_OFFSET)
/* Register Bitfield Definitions ****************************************************/
/* Clock control register */
#define RCC_CR_HSION (1 << 0) /* Bit 0: Internal High Speed clock enable */
#define RCC_CR_HSIRDY (1 << 1) /* Bit 1: Internal High Speed clock ready flag */
#define RCC_CR_HSITRIM_SHIFT (3) /* Bits 7-3: Internal High Speed clock trimming */
#define RCC_CR_HSITRIM_MASK (0x1f << RCC_CR_HSITRIM_SHIFT)
#define RCC_CR_HSICAL_SHIFT (8) /* Bits 15-8: Internal High Speed clock Calibration */
#define RCC_CR_HSICAL_MASK (0xff << RCC_CR_HSICAL_SHIFT)
#define RCC_CR_HSEON (1 << 16) /* Bit 16: External High Speed clock enable */
#define RCC_CR_HSERDY (1 << 17) /* Bit 17: External High Speed clock ready flag */
#define RCC_CR_HSEBYP (1 << 18) /* Bit 18: External High Speed clock Bypass */
#define RCC_CR_CSSON (1 << 19) /* Bit 19: Clock Security System enable */
#define RCC_CR_PLLON (1 << 24) /* Bit 24: PLL enable */
#define RCC_CR_PLLRDY (1 << 25) /* Bit 25: PLL clock ready flag */
/* Clock configuration register */
#define RCC_CFGR_SW_SHIFT (0) /* Bits 1-0: System clock Switch */
#define RCC_CFGR_SW_MASK (3 << RCC_CFGR_SW_SHIFT)
# define RCC_CFGR_SW_HSI (0 << RCC_CFGR_SW_SHIFT) /* 00: HSI selected as system clock */
# define RCC_CFGR_SW_HSE (1 << RCC_CFGR_SW_SHIFT) /* 01: HSE selected as system clock */
# define RCC_CFGR_SW_PLL (2 << RCC_CFGR_SW_SHIFT) /* 10: PLL selected as system clock */
#define RCC_CFGR_SWS_SHIFT (2) /* Bits 3-2: System Clock Switch Status */
#define RCC_CFGR_SWS_MASK (3 << RCC_CFGR_SWS_SHIFT)
# define RCC_CFGR_SWS_HSI (0 << RCC_CFGR_SWS_SHIFT) /* 00: HSI oscillator used as system clock */
# define RCC_CFGR_SWS_HSE (1 << RCC_CFGR_SWS_SHIFT) /* 01: HSE oscillator used as system clock */
# define RCC_CFGR_SWS_PLL (2 << RCC_CFGR_SWS_SHIFT) /* 10: PLL used as system clock */
#define RCC_CFGR_HPRE_SHIFT (4) /* Bits 7-4: AHB prescaler */
#define RCC_CFGR_HPRE_MASK (0x0f << RCC_CFGR_HPRE_SHIFT)
# define RCC_CFGR_HPRE_SYSCLK (0 << RCC_CFGR_HPRE_SHIFT) /* 0xxx: SYSCLK not divided */
# define RCC_CFGR_HPRE_SYSCLKd2 (8 << RCC_CFGR_HPRE_SHIFT) /* 1000: SYSCLK divided by 2 */
# define RCC_CFGR_HPRE_SYSCLKd4 (9 << RCC_CFGR_HPRE_SHIFT) /* 1001: SYSCLK divided by 4 */
# define RCC_CFGR_HPRE_SYSCLKd8 (10 << RCC_CFGR_HPRE_SHIFT) /* 1010: SYSCLK divided by 8 */
# define RCC_CFGR_HPRE_SYSCLKd16 (11 << RCC_CFGR_HPRE_SHIFT) /* 1011: SYSCLK divided by 16 */
# define RCC_CFGR_HPRE_SYSCLKd64 (12 << RCC_CFGR_HPRE_SHIFT) /* 1100: SYSCLK divided by 64 */
# define RCC_CFGR_HPRE_SYSCLKd128 (13 << RCC_CFGR_HPRE_SHIFT) /* 1101: SYSCLK divided by 128 */
# define RCC_CFGR_HPRE_SYSCLKd256 (14 << RCC_CFGR_HPRE_SHIFT) /* 1110: SYSCLK divided by 256 */
# define RCC_CFGR_HPRE_SYSCLKd512 (15 << RCC_CFGR_HPRE_SHIFT) /* 1111: SYSCLK divided by 512 */
#define RCC_CFGR_PPRE1_SHIFT (8) /* Bits 10-8: APB Low speed prescaler (APB1) */
#define RCC_CFGR_PPRE1_MASK (7 << RCC_CFGR_PPRE1_SHIFT)
# define RCC_CFGR_PPRE1_HCLK (0 << RCC_CFGR_PPRE1_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE1_HCLKd2 (4 << RCC_CFGR_PPRE1_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE1_HCLKd4 (5 << RCC_CFGR_PPRE1_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE1_HCLKd8 (6 << RCC_CFGR_PPRE1_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE1_HCLKd16 (7 << RCC_CFGR_PPRE1_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_PPRE2_SHIFT (11) /* Bits 13-11: APB High speed prescaler (APB2) */
#define RCC_CFGR_PPRE2_MASK (7 << RCC_CFGR_PPRE2_SHIFT)
# define RCC_CFGR_PPRE2_HCLK (0 << RCC_CFGR_PPRE2_SHIFT) /* 0xx: HCLK not divided */
# define RCC_CFGR_PPRE2_HCLKd2 (4 << RCC_CFGR_PPRE2_SHIFT) /* 100: HCLK divided by 2 */
# define RCC_CFGR_PPRE2_HCLKd4 (5 << RCC_CFGR_PPRE2_SHIFT) /* 101: HCLK divided by 4 */
# define RCC_CFGR_PPRE2_HCLKd8 (6 << RCC_CFGR_PPRE2_SHIFT) /* 110: HCLK divided by 8 */
# define RCC_CFGR_PPRE2_HCLKd16 (7 << RCC_CFGR_PPRE2_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_ADCPRE_SHIFT (14) /* Bits 15-14: ADC prescaler */
#define RCC_CFGR_ADCPRE_MASK (3 << RCC_CFGR_ADCPRE_SHIFT)
# define RCC_CFGR_PLCK2d2 (0 << RCC_CFGR_ADCPRE_SHIFT) /* 00: PLCK2 divided by 2 */
# define RCC_CFGR_PLCK2d4 (1 << RCC_CFGR_ADCPRE_SHIFT) /* 01: PLCK2 divided by 4 */
# define RCC_CFGR_PLCK2d6 (2 << RCC_CFGR_ADCPRE_SHIFT) /* 10: PLCK2 divided by 6 */
# define RCC_CFGR_PLCK2d8 (3 << RCC_CFGR_ADCPRE_SHIFT) /* 11: PLCK2 divided by 8 */
#define RCC_CFGR_PLLSRC (1 << 16) /* Bit 16: PLL entry clock source */
#define RCC_CFGR_PLLXTPRE (1 << 17) /* Bit 17: HSE divider for PLL entry */
#define RCC_CFGR_PLLMUL_SHIFT (18) /* Bits 21-18: PLL Multiplication Factor */
#define RCC_CFGR_PLLMUL_MASK (0x0f << RCC_CFGR_PLLMUL_SHIFT)
# define RCC_CFGR_PLLMUL_CLKx2 (0 << RCC_CFGR_PLLMUL_SHIFT) /* 0000: PLL input clock x 2 */
# define RCC_CFGR_PLLMUL_CLKx3 (1 << RCC_CFGR_PLLMUL_SHIFT) /* 0001: PLL input clock x 3 */
# define RCC_CFGR_PLLMUL_CLKx4 (2 << RCC_CFGR_PLLMUL_SHIFT) /* 0010: PLL input clock x 4 */
# define RCC_CFGR_PLLMUL_CLKx5 (3 << RCC_CFGR_PLLMUL_SHIFT) /* 0011: PLL input clock x 5 */
# define RCC_CFGR_PLLMUL_CLKx6 (4 << RCC_CFGR_PLLMUL_SHIFT) /* 0100: PLL input clock x 6 */
# define RCC_CFGR_PLLMUL_CLKx7 (5 << RCC_CFGR_PLLMUL_SHIFT) /* 0101: PLL input clock x 7 */
# define RCC_CFGR_PLLMUL_CLKx8 (6 << RCC_CFGR_PLLMUL_SHIFT) /* 0110: PLL input clock x 8 */
# define RCC_CFGR_PLLMUL_CLKx9 (7 << RCC_CFGR_PLLMUL_SHIFT) /* 0111: PLL input clock x 9 */
# define RCC_CFGR_PLLMUL_CLKx10 (8 << RCC_CFGR_PLLMUL_SHIFT) /* 1000: PLL input clock x 10 */
# define RCC_CFGR_PLLMUL_CLKx11 (9 << RCC_CFGR_PLLMUL_SHIFT) /* 1001: PLL input clock x 11 */
# define RCC_CFGR_PLLMUL_CLKx12 (10 << RCC_CFGR_PLLMUL_SHIFT) /* 1010: PLL input clock x 12 */
# define RCC_CFGR_PLLMUL_CLKx13 (11 << RCC_CFGR_PLLMUL_SHIFT) /* 1011: PLL input clock x 13 */
# define RCC_CFGR_PLLMUL_CLKx14 (12 << RCC_CFGR_PLLMUL_SHIFT) /* 1100: PLL input clock x 14 */
# define RCC_CFGR_PLLMUL_CLKx15 (13 << RCC_CFGR_PLLMUL_SHIFT) /* 1101: PLL input clock x 15 */
# define RCC_CFGR_PLLMUL_CLKx16 (14 << RCC_CFGR_PLLMUL_SHIFT) /* 111x: PLL input clock x 16 */
#define RCC_CFGR_USBPRE (1 << 22) /* Bit 22: USB prescaler */
#define RCC_CFGR_MCO_SHIFT (24) /* Bits 26-24: Microcontroller Clock Output */
#define RCC_CFGR_MCO_MASK (7 << RCC_CFGR_MCO_SHIFT)
# define RCC_CFGR_NOCLK (0 << RCC_CFGR_MCO_SHIFT) /* 0xx: No clock */
# define RCC_CFGR_SYSCLK (4 << RCC_CFGR_MCO_SHIFT) /* 100: System clock selected */
# define RCC_CFGR_INTCLK (5 << RCC_CFGR_MCO_SHIFT) /* 101: Internal 8 MHz RC oscillator clock selected */
# define RCC_CFGR_EXTCLK (6 << RCC_CFGR_MCO_SHIFT) /* 110: External 1-25 MHz oscillator clock selected */
# define RCC_CFGR_PLLCLKd2 (7 << RCC_CFGR_MCO_SHIFT) /* 111: PLL clock divided by 2 selected */
/* Clock interrupt register */
#define RCC_CIR_LSIRDYF (1 << 0) /* Bit 0: LSI Ready Interrupt flag */
#define RCC_CIR_LSERDYF (1 << 1) /* Bit 1: LSE Ready Interrupt flag */
#define RCC_CIR_HSIRDYF (1 << 2) /* Bit 2: HSI Ready Interrupt flag */
#define RCC_CIR_HSERDYF (1 << 3) /* Bit 3: HSE Ready Interrupt flag */
#define RCC_CIR_PLLRDYF (1 << 4) /* Bit 4: PLL Ready Interrupt flag */
#define RCC_CIR_CSSF (1 << 7) /* Bit 7: Clock Security System Interrupt flag */
#define RCC_CIR_LSIRDYIE (1 << 8) /* Bit 8: LSI Ready Interrupt Enable */
#define RCC_CIR_LSERDYIE (1 << 9) /* Bit 9: LSE Ready Interrupt Enable */
#define RCC_CIR_HSIRDYIE (1 << 10) /* Bit 10: HSI Ready Interrupt Enable */
#define RCC_CIR_HSERDYIE (1 << 11) /* Bit 11: HSE Ready Interrupt Enable */
#define RCC_CIR_PLLRDYIE (1 << 12) /* Bit 12: PLL Ready Interrupt Enable */
#define RCC_CIR_LSIRDYC (1 << 16) /* Bit 16: LSI Ready Interrupt Clear */
#define RCC_CIR_LSERDYC (1 << 17) /* Bit 17: LSE Ready Interrupt Clear */
#define RCC_CIR_HSIRDYC (1 << 18) /* Bit 18: HSI Ready Interrupt Clear */
#define RCC_CIR_HSERDYC (1 << 19) /* Bit 19: HSE Ready Interrupt Clear */
#define RCC_CIR_PLLRDYC (1 << 20) /* Bit 20: PLL Ready Interrupt Clear */
#define RCC_CIR_CSSC (1 << 23) /* Bit 23: Clock Security System Interrupt Clear */
/* APB2 Peripheral reset register */
#define RCC_APB2RSTR_AFIORST (1 << 0) /* Bit 0: Alternate Function I/O reset */
#define RCC_APB2RSTR_IOPARST (1 << 2) /* Bit 2: I/O port A reset */
#define RCC_APB2RSTR_IOPBRST (1 << 3) /* Bit 3: IO port B reset */
#define RCC_APB2RSTR_IOPCRST (1 << 4) /* Bit 4: IO port C reset */
#define RCC_APB2RSTR_IOPDRST (1 << 5) /* Bit 5: IO port D reset */
#define RCC_APB2RSTR_IOPERST (1 << 6) /* Bit 6: IO port E reset */
#define TCC_APB2RSTR_IOPFRST (1 << 7) /* Bit 7: IO port F reset */
#define TCC_APB2RSTR_IOPGRST (1 << 8) /* Bit 8: IO port G reset */
#define RCC_APB2RSTR_ADC1RST (1 << 9) /* Bit 9: ADC 1 interface reset */
#define RCC_APB2RSTR_ADC2RST (1 << 10) /* Bit 10: ADC 2 interface reset */
#define RCC_APB2RSTR_TIM1RST (1 << 11) /* Bit 11: TIM1 Timer reset */
#define RCC_APB2RSTR_SPI1RST (1 << 12) /* Bit 12: SPI 1 reset */
#define RCC_APB2RSTR_TIM8RST (1 << 13) /* Bit 13: TIM8 Timer reset */
#define RCC_APB2RSTR_USART1RST (1 << 14) /* Bit 14: USART1 reset */
#define RCC_APB2RTST_ADC2RST (1 << 15) /* Bit 15: ADC3 interface reset */
/* APB1 Peripheral reset register */
#define RCC_APB1RSTR_TIM2RST (1 << 0) /* Bit 0: Timer 2 reset */
#define RCC_APB1RSTR_TIM3RST (1 << 1) /* Bit 1: Timer 3 reset */
#define RCC_APB1RSTR_TIM4RST (1 << 2) /* Bit 2: Timer 4 reset */
#define RCC_APB1RSTR_TIM5RST (1 << 3) /* Bit 3: Timer 5 reset */
#define RCC_APB1RSTR_TIM6RST (1 << 4) /* Bit 4: Timer 6 reset */
#define RCC_APB1RSTR_TIM7RST (1 << 5) /* Bit 5: Timer 7 reset */
#define RCC_APB1RSTR_WWDGRST (1 << 11) /* Bit 11: Window Watchdog reset */
#define RCC_APB1RSTR_SPI2RST (1 << 14) /* Bit 14: SPI 2 reset */
#define RCC_APB1RSTR_SPI3RST (1 << 15) /* Bit 15: SPI 3 reset */
#define RCC_APB1RSTR_USART2RST (1 << 17) /* Bit 17: USART 2 reset */
#define RCC_APB1RSTR_USART3RST (1 << 18) /* Bit 18: USART 3 reset */
#define RCC_APB1RSTR_UART4RST (1 << 19) /* Bit 19: UART 4 reset */
#define RCC_APB1RSTR_UART5RST (1 << 20) /* Bit 18: UART 5 reset */
#define RCC_APB1RSTR_I2C1RST (1 << 21) /* Bit 21: I2C 1 reset */
#define RCC_APB1RSTR_I2C2RST (1 << 22) /* Bit 22: I2C 2 reset */
#define RCC_APB1RSTR_USBRST (1 << 23) /* Bit 23: USB reset */
#define RCC_APB1RSTR_CANRST (1 << 25) /* Bit 25: CAN reset */
#define RCC_APB1RSTR_BKPRST (1 << 27) /* Bit 27: Backup interface reset */
#define RCC_APB1RSTR_PWRRST (1 << 28) /* Bit 28: Power interface reset */
#define RCC_APB1RSTR_DACRST (1 << 29) /* Bit 29: DAC interface reset */
/* AHB Peripheral Clock enable register */
#define RCC_AHBENR_DMA1EN (1 << 0) /* Bit 0: DMA1 clock enable */
#define RCC_AHBENR_DMA2EN (1 << 1) /* Bit 1: DMA2 clock enable */
#define RCC_AHBENR_SRAMEN (1 << 2) /* Bit 2: SRAM interface clock enable */
#define RCC_AHBENR_FLITFEN (1 << 4) /* Bit 4: FLITF clock enable */
#define RCC_AHBENR_CRCEN (1 << 6) /* Bit 6: CRC clock enable */
#define RCC_AHBENR_FSMCEN (1 << 8) /* Bit 8: FSMC clock enable */
#define RCC_AHBENR_SDIOEN (1 << 10) /* Bit 10: SDIO clock enable */
/* APB2 Peripheral Clock enable register */
#define RCC_APB2ENR_AFIOEN (1 << 0) /* Bit 0: Alternate Function I/O clock enable */
#define RCC_APB2ENR_IOPEN(n) (1 << ((n)+2))
#define RCC_APB2ENR_IOPAEN (1 << 2) /* Bit 2: I/O port A clock enable */
#define RCC_APB2ENR_IOPBEN (1 << 3) /* Bit 3: I/O port B clock enable */
#define RCC_APB2ENR_IOPCEN (1 << 4) /* Bit 4: I/O port C clock enable */
#define RCC_APB2ENR_IOPDEN (1 << 5) /* Bit 5: I/O port D clock enable */
#define RCC_APB2ENR_IOPEEN (1 << 6) /* Bit 6: I/O port E clock enable */
#define RCC_APB2ENR_IOPFEN (1 << 7) /* Bit 7: I/O port F clock enable */
#define RCC_APB2ENR_IOPGEN (1 << 8) /* Bit 8: I/O port G clock enable */
#define RCC_APB2ENR_ADC1EN (1 << 9) /* Bit 9: ADC 1 interface clock enable */
#define RCC_APB2ENR_ADC2EN (1 << 10) /* Bit 10: ADC 2 interface clock enable */
#define RCC_APB2ENR_TIM1EN (1 << 11) /* Bit 11: TIM1 Timer clock enable */
#define RCC_APB2ENR_SPI1EN (1 << 12) /* Bit 12: SPI 1 clock enable */
#define RCC_APB2ENR_TIM8EN (1 << 13) /* Bit 13: TIM8 Timer clock enable */
#define RCC_APB2ENR_USART1EN (1 << 14) /* Bit 14: USART1 clock enable */
#define RCC_APB2ENR_ADC3EN (1 << 15) /* Bit 14: ADC3 interface clock enable */
/* APB1 Peripheral Clock enable register */
#define RCC_APB1ENR_TIM2EN (1 << 0) /* Bit 0: Timer 2 clock enable */
#define RCC_APB1ENR_TIM3EN (1 << 1) /* Bit 1: Timer 3 clock enable */
#define RCC_APB1ENR_TIM4EN (1 << 2) /* Bit 2: Timer 4 clock enable */
#define RCC_APB1ENR_TIM5EN (1 << 3) /* Bit 3: Timer 5 clock enable */
#define RCC_APB1ENR_TIM6EN (1 << 4) /* Bit 4: Timer 6 clock enable */
#define RCC_APB1ENR_TIM7EN (1 << 5) /* Bit 5: Timer 7 clock enable */
#define RCC_APB1ENR_WWDGEN (1 << 11) /* Bit 11: Window Watchdog clock enable */
#define RCC_APB1ENR_SPI2EN (1 << 14) /* Bit 14: SPI 2 clock enable */
#define RCC_APB1ENR_SPI3EN (1 << 15) /* Bit 15: SPI 3 clock enable */
#define RCC_APB1ENR_USART2EN (1 << 17) /* Bit 17: USART 2 clock enable */
#define RCC_APB1ENR_USART3EN (1 << 18) /* Bit 18: USART 3 clock enable */
#define RCC_APB1ENR_UART4EN (1 << 19) /* Bit 19: UART 4 clock enable */
#define RCC_APB1ENR_UART5EN (1 << 20) /* Bit 20: UART 5 clock enable */
#define RCC_APB1ENR_I2C1EN (1 << 21) /* Bit 21: I2C 1 clock enable */
#define RCC_APB1ENR_I2C2EN (1 << 22) /* Bit 22: I2C 2 clock enable */
#define RCC_APB1ENR_USBEN (1 << 23) /* Bit 23: USB clock enable */
#define RCC_APB1ENR_CANEN (1 << 25) /* Bit 25: CAN clock enable */
#define RCC_APB1ENR_BKPEN (1 << 27) /* Bit 27: Backup interface clock enable */
#define RCC_APB1ENR_PWREN (1 << 28) /* Bit 28: Power interface clock enable */
#define RCC_APB1ENR_DACEN (1 << 29) /* Bit 29: DAC interface clock enable */
/* Backup domain control register */
#define RCC_BDCR_BDRST (1 << 16) /* Bit 16: Backup domain software reset */
#define RCC_BDCR_RTCEN (1 << 15) /* Bit 15: RTC clock enable */
#define RCC_BDCR_RTCSEL_SHIFT (8) /* Bits 9:8: RTC clock source selection */
#define RCC_BDCR_RTCSEL_MASK (3 << RCC_BDCR_RTCSEL_SHIFT)
# define RCC_BDCR_RTCSEL_NOCLK (0 << RCC_BDCR_RTCSEL_SHIFT) /* 00: No clock */
# define RCC_BDCR_RTCSEL_LSE (1 << RCC_BDCR_RTCSEL_SHIFT) /* 01: LSE oscillator clock used as RTC clock */
# define RCC_BDCR_RTCSEL_LSI (2 << RCC_BDCR_RTCSEL_SHIFT) /* 10: LSI oscillator clock used as RTC clock */
# define RCC_BDCR_RTCSEL_HSE (3 << RCC_BDCR_RTCSEL_SHIFT) /* 11: HSE oscillator clock divided by 128 used as RTC clock */
#define RCC_BDCR_LSEBYP (1 << 2) /* Bit 2: External Low Speed oscillator Bypass */
#define RCC_BDCR_LSERDY (1 << 1) /* Bit 1: External Low Speed oscillator Ready */
#define RCC_BDCR_LSEON (1 << 0) /* Bit 0: External Low Speed oscillator enable */
/* Control/status register */
#define RCC_CSR_LSION (1 << 0) /* Bit 0: Internal Low Speed oscillator enable */
#define RCC_CSR_LSIRDY (1 << 1) /* Bit 1: Internal Low Speed oscillator Ready */
#define RCC_CSR_RMVF (1 << 24) /* Bit 24: Remove reset flag */
#define RCC_CSR_PINRSTF (1 << 26) /* Bit 26: PIN reset flag */
#define RCC_CSR_PORRSTF (1 << 27) /* Bit 27: POR/PDR reset flag */
#define RCC_CSR_SFTRSTF (1 << 28) /* Bit 28: Software Reset flag */
#define RCC_CSR_IWDGRSTF (1 << 29) /* Bit 29: Independent Watchdog reset flag */
#define RCC_CSR_WWDGRSTF (1 << 30) /* Bit 30: Window watchdog reset flag */
#define RCC_CSR_LPWRRSTF (1 << 31) /* Bit 31: Low-Power reset flag */
#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32_RRC_H */
|