path: root/nuttx/arch/z16/src/z16f/chip.h

/************************************************************************************
 * arch/z16/src/z16f/chip.h
 *
 *   Copyright (C) 2008-2009, 2014 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_Z16_SRC_Z16F_CHIP_H
#define __ARCH_Z16_SRC_Z16F_CHIP_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>
#ifndef __ASSEMBLY__
#  include <stdint.h>
#endif
#include <arch/irq.h>
#include "common/up_internal.h"

/************************************************************************************
 * Definitions
 ************************************************************************************/

/* Hexadecimal Representation *******************************************************/

#ifdef __ASSEMBLY__
# define _HX32(w)   %##w
# define _HX8(b)    %##b
#else
# define _HX32(w)   0x##w
# define _HX8(b)    0x##b
#endif

/* Z16F Chip Variants ***************************************************************/

#if defined(CONFIG_ARCH_CHIP_Z16F2810)
# define Z16F_INVMEM_SIZE     (128*1024)
# define Z16F_IRAM_SIZE       (4*1024)
# undef  Z16F_HAVE_EXTMEM
# undef  Z16F_HAVE_GPIO_PORTJ
# undef  Z16F_HAVE_GPIO_PORTK
#elif defined(CONFIG_ARCH_CHIP_Z16F2811)
# define Z16F_INVMEM_SIZE     (128*1024)
# define Z16F_IRAM_SIZE       (4*1024)
# define Z16F_HAVE_EXTMEM     1
# define Z16F_HAVE_GPIO_PORTJ 1
# define Z16F_HAVE_GPIO_PORTK 1
#elif defined(CONFIG_ARCH_CHIP_Z16F3211)
# define Z16F_INVMEM_SIZE     (32*1024)
# define Z16F_IRAM_SIZE       (2*1024)
# define Z16F_HAVE_EXTMEM      1
#elif defined(CONFIG_ARCH_CHIP_Z16F6411)
# define Z16F_INVMEM_SIZE     (64*1024)
# define Z16F_IRAM_SIZE       (4*1024)
# define Z16F_HAVE_EXTMEM     1
#else
# error "Z16F chip variant not specified"
#endif

/* Flash option settings at address 0x00000000 ************************************/

#define Z16F_FLOPTION0          rom char _flash_option0 _At 0x0
#define Z16F_FLOPTION1          rom char _flash_option1 _At 0x1
#define Z16F_FLOPTION2          rom char _flash_option2 _At 0x2
#define Z16F_FLOPTION3          rom char _flash_option3 _At 0x3

#define Z16F_FLOPTION0_OSCSEL   _HX8(c0) /* Bits 6-7: OSC_SEL */
#define Z16F_FLOPTION0_EXTRNRC  _HX8(00) /* 00: On-chip oscillator with ext RC networks */
#define Z16F_FLOPTION0_LOWFREQ  _HX8(40) /* 01: Min. power with very low frequency crystals */
#define Z16F_FLOPTION0_MEDFREQ  _HX8(80) /* 10: Medium power with medium frequency crystals */
#define Z16F_FLOPTION0_MAXPWR   _HX8(c0) /* 11: Maximum power with high frequency crystals */
#define Z16F_FLOPTION0_WDTRES   _HX8(20) /* Bit 5: WDT Reset */
#define Z16F_FLOPTION0_WDTA0    _HX8(10) /* Bit 4: WDT Always On */
#define Z16F_FLOPTION0_VBOA0    _HX8(08) /* Bit 3: Voltage Brown-Out Protection Always On */
#define Z16F_FLOPTION0_DBGUART  _HX8(04) /* Bit 2: Debug UART Enable */
#define Z16F_FLOPTION0_FWP      _HX8(02) /* Bit 1: Flash Write Protect */
#define Z16F_FLOPTION0_RP       _HX8(01) /* Bit 0: Read Protect */

#define Z16F_FLOPTION1_RESVD    _HX8(f8) /* Bits 3-7: Reserved */
#define Z16F_FLOPTION1_MCEN     _HX8(04) /* Bit 2: Motor control pins enable */
#define Z16F_FLOPTION1_OFFH     _HX8(02) /* Bit 1: High side OFF */
#define Z16F_FLOPTION1_OFFL     _HX8(01) /* Bit 0: Low side OFF */

#define Z16F_FLOPTION2_RESVD    _HX8(ff) /* Bits 0-7: reserved */

#define Z16F_FLOPTION3_ROMLESS  _HX8(80) /* Bit 7: ROMLESS 16 Select */
#define Z16F_FLOPTION3_NORMAL   _HX8(40) /* Bit 6: 1:Normal 0:Low power mode */
#define Z16F_FLOPTION3_RESVD    _HX8(3f) /* Bits 0-5: Reserved */

/* Memory areas *******************************************************************
 *
 * Internal non-volatile memory starts at address zero.  The size
 * of the internal non-volatile memory is chip-dependent.
 */

#define Z16F_INVMEM_BASE        _HX32(00000000)

/* Most chip variants support external memory */

#ifdef Z16F_HAVE_EXTMEM
#  define Z16F_EXTMEMCS0_BASE   _HX32(00000000) /* External memory at CS0 */
#  define Z16F_EXTMEMCS0_SIZE   _HX32(007e0000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS1_BASE   _HX32(ff800000) /* External memory at CS1 */
#  define Z16F_EXTMEMCS1_SIZE   _HX32(00700000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS2A_BASE  _HX32(fff00000) /* External memory at CS2 */
#  define Z16F_EXTMEMCS2A_SIZE  _HX32(000f8000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS2B_BASE  _HX32(ffffc000) /* External memory at CS2 */
#  define Z16F_EXTMEMCS2B_SIZE  _HX32(00000800) /*   (actual depends on board) */
#endif

/* Internal RAM always ends at 0xffbfff.  The IRAM base address depends
 * on the size of the IRAM supported by the chip.
 */

#define Z16F_IRAM_BASE          (_HX32(ffffc000) - Z16F_IRAM_SIZE)

/* External memory mapped peripherals, internal I/O memory and SFRS */

#define Z16F_EXTIO_BASE         _HX32(ffffc800) /* External peripherals CS3-5 */
#define Z16F_EXTIO_SIZE         _HX32(00001800)
#define Z16F_IIO_BASE           _HX32(ffffe000) /* Internal I/O memory and SFRs */
#define Z16F_IIO_SIZE           _HX32(00001fff)

/* Control Registers  ***************************************************************/

#define Z16F_CNTRL_PCOV         _HX32(ffffe004) /* 32-bits: Program counter overflow */
#define Z16F_CNTRL_SPOV         _HX32(ffffe00c) /* 32-bits: Stack pointer overflow */
#define Z16F_CNTRL_FLAGS        _HX32(ffffe100) /*  8-bits: flags */
#define Z16F_CNTRL_CPUCTL       _HX32(ffffe102) /*  8-bits: CPU control */

/* Flag register bits ***************************************************************/

#define Z16F_CNTRL_FLAGS_C      _HX8(80)        /* Bit 7: Carry flag */
#define Z16F_CNTRL_FLAGS_Z      _HX8(40)        /* Bit 6: Zero flag */
#define Z16F_CNTRL_FLAGS_S      _HX8(20)        /* Bit 5: Sign flag */
#define Z16F_CNTRL_FLAGS_V      _HX8(10)        /* Bit 4: Overflow flag */
#define Z16F_CNTRL_FLAGS_B      _HX8(08)        /* Bit 3: Blank flag */
#define Z16F_CNTRL_FLAGS_F1     _HX8(04)        /* Bit 2: User flag 1 */
#define Z16F_CNTRL_FLAGS_CIRQE  _HX8(02)        /* Bit 1: Chained interrupt enable */
#define Z16F_CNTRL_FLAGS_IRQE   _HX8(01)        /* Bit 0: Master interrupt enable */

/* CPU control register bits ********************************************************/

                                                /* Bits 7-2: Reserved, must be zero */
                                                /* Bits 1-0: DMA bandwidth control */
#define Z16F_CNTRL_CPUCTL_BWALL _HX8(00)        /*   DMA can consume 100% bandwidth */
#define Z16F_CNTRL_CPUCTL_BW11  _HX8(01)        /*   DMA can do 1 transaction per 1 cycle */
#define Z16F_CNTRL_CPUCTL_BW12  _HX8(01)        /*   DMA can do 1 transaction per 2 cycles */
#define Z16F_CNTRL_CPUCTL_BW13  _HX8(01)        /*   DMA can do 1 transaction per 3 cycles */

/* Trace registers ******************************************************************/

#define Z16F_TRACE_CTL          _HX32(ffffe013) /*  8-bit: Trace Control */
#define Z16F_TRACE_ADDR         _HX32(ffffe014) /* 32-bit: Trace Address */

/* Interrupt controller registers ***************************************************/

#define Z16F_SYSEXCP            _HX32(ffffe020) /* 16-bit: System Exception Status */
#  define Z16F_SYSEXCPH         _HX32(ffffe020) /*  8-bit: System Exception Status High */
#  define Z16F_SYSEXCPL         _HX32(ffffe021) /*  8-bit: System Exception Status Low */
#define Z16F_LASTIRQ            _HX32(ffffe023) /*  8-bit: Last IRQ Register */
#define Z16F_IRQ0               _HX32(ffffe030) /*  8-bit: Interrupt Request 0 */
#define Z16F_IRQ0_SET           _HX32(ffffe031) /*  8-bit: Interrupt Request 0 Set */
#define Z16F_IRQ0_EN            _HX32(ffffe032) /* 16-bit: IRQ0 Enable */
#  define Z16F_IRQ0_ENH         _HX32(ffffe032) /*  8-bit: IRQ0 Enable High Bit */
#  define Z16F_IRQ0_ENL         _HX32(ffffe033) /*  8-bit: IRQ0 Enable Low Bit */
#define Z16F_IRQ1               _HX32(ffffe034) /*  8-bit: Interrupt Request 1 */
#define Z16F_IRQ1_SET           _HX32(ffffe035) /*  8-bit: Interrupt Request 1 Set */
#define Z16F_IRQ1_EN            _HX32(ffffe036) /* 16-bit: IRQ1 Enable */
#  define Z16F_IRQ1_ENH         _HX32(ffffe036) /*  8-bit: IRQ1 Enable High Bit */
#  define Z16F_IRQ1_ENL         _HX32(ffffe037) /*  8-bit: IRQ1 Enable Low Bit */
#define Z16F_IRQ2               _HX32(ffffe038) /*  8-bit: Interrupt Request 2 */
#define Z16F_IRQ2_SET           _HX32(ffffe039) /*  8-bit  Interrupt Request 2 Set */
#define Z16F_IRQ2_EN            _HX32(ffffe03a) /* 16-bit: IRQ2 Enable */
#  define Z16F_IRQ2_ENH         _HX32(ffffe03a) /*  8-bit: IRQ2 Enable High Bit */
#  define Z16F_IRQ2_ENL         _HX32(ffffe03c) /*  8-bit: IRQ2 Enable Low Bit */

/* System exception status register bit definitions *********************************/

#define Z16F_SYSEXCPH_SPOVF     _HX8(80)        /* Bit 7: Stack pointer overflow */
#define Z16F_SYSEXCPH_PCOVF     _HX8(40)        /* Bit 6: Program counter overflow */
#define Z16F_SYSEXCPH_DIV0      _HX8(20)        /* Bit 5: Divide by zero */
#define Z16F_SYSEXCPH_DIVOVF    _HX8(10)        /* Bit 4: Divide overflow */
#define Z16F_SYSEXCPH_ILL       _HX8(08)        /* Bit 3: Illegal instruction */
                                                /* Bits 0-2: Reserved */
                                                /* Bits 3-7: Reserved */
#define Z16F_SYSEXCPL_WDTOSC    _HX8(04)        /* Bit 2: WDT oscillator failure */
#define Z16F_SYSEXCPL_PRIOSC    _HX8(02)        /* Bit 1: Primary oscillator failure */
#define Z16F_SYSEXCPL_WDT       _HX8(01)        /* Bit 0: Watchdog timer interrupt */

#define Z16F_SYSEXCP_SPOVF     (Z16F_SYSEXCPH_SPOVF << 8)
#define Z16F_SYSEXCP_PCOVF     (Z16F_SYSEXCPH_PCOVF << 8)
#define Z16F_SYSEXCP_DIV0      (Z16F_SYSEXCPH_DIV0 << 8)
#define Z16F_SYSEXCP_DIVOVF    (Z16F_SYSEXCPH_DIVOVF << 8)
#define Z16F_SYSEXCP_ILL       (Z16F_SYSEXCPH_ILL << 8)
#define Z16F_SYSEXCP_WDTOSC    Z16F_SYSEXCPL_WDTOSC
#define Z16F_SYSEXCP_PRIOSC    Z16F_SYSEXCPL_PRIOSC
#define Z16F_SYSEXCP_WDT       Z16F_SYSEXCPL_WDT

/* External memory interface ********************************************************/

#define Z16F_EXTCT             _HX32(ffffe070) /* External Interface Control */
#define Z16F_EXTCS0            _HX32(ffffe072) /* Chip Select 0 Control */
#  define Z16F_EXTCS0H         _HX32(ffffe072) /* Chip Select 0 Control High */
#  define Z16F_EXTCS0L         _HX32(ffffe073) /* Chip Select 0 Control Low */
#define Z16F_EXTCS1            _HX32(ffffe074) /* Chip Select 1 Control */
#  define Z16F_EXTCS1H         _HX32(ffffe074) /* Chip Select 1 Control High */
#  define Z16F_EXTCS1L         _HX32(ffffe075) /* Chip Select 1 Control Low */
#define Z16F_EXTCS2            _HX32(ffffe076) /* Chip Select 2 Control */
#  define Z16F_EXTCS2H         _HX32(ffffe076) /* Chip Select 2 Control High */
#  define Z16F_EXTCS2L         _HX32(ffffe077) /* Chip Select 2 Control Low */
#define Z16F_EXTCS3            _HX32(ffffe078) /* Chip Select 3 Control */
#  define Z16F_EXTCS3H         _HX32(ffffe078) /* Chip Select 3 Control High */
#  define Z16F_EXTCS3L         _HX32(ffffe079) /* Chip Select 3 Control Low */
#define Z16F_EXTCS4            _HX32(ffffe07a) /* Chip Select 4 Control  */
#  define Z16F_EXTCS4H         _HX32(ffffe07a) /* Chip Select 4 Control High  */
#  define Z16F_EXTCS4L         _HX32(ffffe07b) /* Chip Select 4 Control Low */
#define Z16F_EXTCS5            _HX32(ffffe07c) /* Chip Select 5 Control */
#  define Z16F_EXTCS5H         _HX32(ffffe07c) /* Chip Select 5 Control High */
#  define Z16F_EXTCS5L         _HX32(ffffe07d) /* Chip Select 5 Control Low */

/* Oscillator control registers *****************************************************/

#define Z16F_OSC_CTL            _HX32(ffffe0A0) /*  8-bit: Oscillator Control */
#define Z16F_OSC_DIV            _HX32(ffffe0A1) /*  8-bit: Oscillator Divide */

/* Oscillator control register bits *************************************************/

#define Z16F_OSCCTL_INTEN       _HX8(80)        /* Bit 7: Internal oscillator enabled */
#define Z16F_OSCCTL_XTLEN       _HX8(40)        /* Bit 6: Crystal oscillator enabled */
#define Z16F_OSCCTL_WDTEN       _HX8(20)        /* Bit 5: Watchdog timer enabled */
#define Z16F_OSCCTL_POFEN       _HX8(10)        /* Bit 4: Failure detection enabled */
#define Z16F_OSCCTL_WDFEN       _HX8(08)        /* Bit 3: WD Failure detection enabled*/
#define Z16F_OSCCTL_FLPEN       _HX8(04)        /* Bit 2: Flash low power enabled */
#define Z16F_OSCCTL_INT56       _HX8(00)        /* Bits 0-1=0: Internal 5.6 MHz */
#define Z16F_OSCCTL_EXTCLK      _HX8(02)        /* Bits 0-1=2: External clock */
#define Z16F_OSCCTL_WDT10KHZ    _HX8(03)        /* Bits 0-1=3: WD Timer 10 KHz*/

/* GPIO Port A-K ********************************************************************/

#define Z16F_GPIOA_IN           _HX32(ffffe100) /*  8-bits: Port A Input Data */
#define Z16F_GPIOA_OUT          _HX32(ffffe101) /*  8-bits: Port A Output Data */
#define Z16F_GPIOA_DD           _HX32(ffffe102) /*  8-bits: Port A Data Direction */
#define Z16F_GPIOA_HDE          _HX32(ffffe103) /*  8-bits: Port A High Drive Enable */
#define Z16F_GPIOA_AF           _HX32(ffffe104) /* 16-bits: Port A Alternate Function */
#  define Z16F_GPIOA_AFH        _HX32(ffffe104) /*  8-bits: Port A Alternate Function High */
#  define Z16F_GPIOA_AFL        _HX32(ffffe105) /*  8-bits: Port A Alternate Function Low */
#define Z16F_GPIOA_OC           _HX32(ffffe106) /*  8-bits: Port A Output Control */
#define Z16F_GPIOA_PUE          _HX32(ffffe107) /*  8-bits: Port A Pull-Up Enable */
#define Z16F_GPIOA_SMRE         _HX32(ffffe108) /*  8-bits: Port A Stop Mode Recovery En */
#define Z16F_GPIOA_IMUX1        _HX32(ffffe10c) /*  8-bits: Port A IRQ Mux 1 */
#define Z16F_GPIOA_IMUX         _HX32(ffffe10e) /*  8-bits: Port A IRQ Mux */
#define Z16F_GPIOA_IEDGE        _HX32(ffffe10f) /*  8-bits: Port A IRQ Edge */

#define Z16F_GPIOB_IN           _HX32(ffffe110) /*  8-bits: Port B Input Data */
#define Z16F_GPIOB_OUT          _HX32(ffffe111) /*  8-bits: Port B Output Data */
#define Z16F_GPIOB_DD           _HX32(ffffe112) /*  8-bits: Port B Data Direction */
#define Z16F_GPIOB_HDE          _HX32(ffffe113) /*  8-bits: Port B High Drive Enable */
#define Z16F_GPIOB_AFL          _HX32(ffffe115) /*  8-bits: Port B Alternate Function Low */
#define Z16F_GPIOB_OC           _HX32(ffffe116) /*  8-bits: Port B Output Control */
#define Z16F_GPIOB_PUE          _HX32(ffffe117) /*  8-bits: Port B Pull-Up Enable */
#define Z16F_GPIOB_SMRE         _HX32(ffffe118) /*  8-bits: Port B Stop Mode Recovery En */

#define Z16F_GPIOC_IN           _HX32(ffffe120) /*  8-bits: Port C Input Data */
#define Z16F_GPIOC_OUT          _HX32(ffffe121) /*  8-bits: Port C Output Data */
#define Z16F_GPIOC_DD           _HX32(ffffe122) /*  8-bits: Port C Data Direction */
#define Z16F_GPIOC_HDE          _HX32(ffffe123) /*  8-bits: Port C High Drive Enable */
#define Z16F_GPIOC_AF           _HX32(ffffe124) /* 16-bits: Port C Alternate Function */
#  define Z16F_GPIOC_AFH        _HX32(ffffe124) /*  8-bits: Port C Alternate Function High */
#  define Z16F_GPIOC_AFL        _HX32(ffffe125) /*  8-bits: Port C Alternate Function Low */
#define Z16F_GPIOC_OC           _HX32(ffffe126) /*  8-bits: Port C Output Control */
#define Z16F_GPIOC_PUE          _HX32(ffffe127) /*  8-bits: Port C Pull-Up Enable */
#define Z16F_GPIOC_SMRE         _HX32(ffffe128) /*  8-bits: Port C Stop Mode Recovery En */
#define Z16F_GPIOC_IMUX         _HX32(ffffe12e) /*  8-bits: Port C IRQ Mux */

#define Z16F_GPIOD_IN           _HX32(ffffe130) /*  8-bits: Port D Input Data */
#define Z16F_GPIOD_OUT          _HX32(ffffe131) /*  8-bits: Port D Output Data */
#define Z16F_GPIOD_DD           _HX32(ffffe132) /*  8-bits: Port D Data Direction */
#define Z16F_GPIOD_HDE          _HX32(ffffe133) /*  8-bits: Port D High Drive Enable */
#define Z16F_GPIOD_AF           _HX32(ffffe134) /* 16-bits: Port D Alternate Function */
#  define Z16F_GPIOD_AFH        _HX32(ffffe134) /*  8-bits: Port D Alternate Function High */
#  define Z16F_GPIOD_AFL        _HX32(ffffe135) /*  8-bits: Port D Alternate Function Low */
#define Z16F_GPIOD_OC           _HX32(ffffe136) /*  8-bits: Port D Output Control */
#define Z16F_GPIOD_PUE          _HX32(ffffe137) /*  8-bits: Port D Pull-Up Enable */
#define Z16F_GPIOD_SMRE         _HX32(ffffe138) /*  8-bits: Port D Stop Mode Recovery En */

#define Z16F_GPIOE_IN           _HX32(ffffe140) /*  8-bits: Port E Input Data */
#define Z16F_GPIOE_OUT          _HX32(ffffe141) /*  8-bits: Port E Output Data */
#define Z16F_GPIOE_DD           _HX32(ffffe142) /*  8-bits: Port E Data Direction */
#define Z16F_GPIOE_HDE          _HX32(ffffe143) /*  8-bits: Port E High Drive Enable */
#define Z16F_GPIOE_OC           _HX32(ffffe146) /*  8-bits: Port E Output Control */
#define Z16F_GPIOE_PUE          _HX32(ffffe147) /*  8-bits: Port E Pull-Up Enable */
#define Z16F_GPIOE_SMRE         _HX32(ffffe148) /*  8-bits: Port E Stop Mode Recovery En */

#define Z16F_GPIOF_IN           _HX32(ffffe150) /*  8-bits: Port F Input Data */
#define Z16F_GPIOF_OUT          _HX32(ffffe151) /*  8-bits: Port F Output Data */
#define Z16F_GPIOF_DD           _HX32(ffffe152) /*  8-bits: Port F Data Direction */
#define Z16F_GPIOF_HDE          _HX32(ffffe153) /*  8-bits: Port F High Drive Enable */
#define Z16F_GPIOF_AFL          _HX32(ffffe155) /*  8-bits: Port F Alternate Function Low */
#define Z16F_GPIOF_OC           _HX32(ffffe156) /*  8-bits: Port F Output Control */
#define Z16F_GPIOF_PUE          _HX32(ffffe157) /*  8-bits: Port F Pull-Up Enable */
#define Z16F_GPIOF_SMRE         _HX32(ffffe158) /*  8-bits: Port F Stop Mode Recovery En */

#define Z16F_GPIOG_IN           _HX32(ffffe160) /*  8-bits: Port G Input Data */
#define Z16F_GPIOG_OUT          _HX32(ffffe161) /*  8-bits: Port G Output Data */
#define Z16F_GPIOG_DD           _HX32(ffffe162) /*  8-bits: Port G Data Direction */
#define Z16F_GPIOG_HDE          _HX32(ffffe163) /*  8-bits: Port G High Drive Enable */
#define Z16F_GPIOG_AFL          _HX32(ffffe165) /*  8-bits: Port G Alternate Function Low */
#define Z16F_GPIOG_OC           _HX32(ffffe166) /*  8-bits: Port G Output Control */
#define Z16F_GPIOG_PUE          _HX32(ffffe167) /*  8-bits: Port G Pull-Up Enable */
#define Z16F_GPIOG_SMRE         _HX32(ffffe168) /*  8-bits: Port G Stop Mode Recovery En */

#define Z16F_GPIOH_IN           _HX32(ffffe170) /*  8-bits: Port H Input Data */
#define Z16F_GPIOH_OUT          _HX32(ffffe171) /*  8-bits: Port H Output Data */
#define Z16F_GPIOH_DD           _HX32(ffffe172) /*  8-bits: Port H Data Direction */
#define Z16F_GPIOH_HDE          _HX32(ffffe173) /*  8-bits: Port H High Drive Enable */
#define Z16F_GPIOH_AF           _HX32(ffffe174) /* 16-bits: Port H Alternate Function */
#  define Z16F_GPIOH_AFH        _HX32(ffffe174) /*  8-bits: Port H Alternate Function High */
#  define Z16F_GPIOH_AFL        _HX32(ffffe175) /*  8-bits: Port H Alternate Function LOw */
#define Z16F_GPIOH_OC           _HX32(ffffe176) /*  8-bits: Port H Output Control */
#define Z16F_GPIOH_PUE          _HX32(ffffe177) /*  8-bits: Port H Pull-Up Enable */
#define Z16F_GPIOH_SMRE         _HX32(ffffe178) /*  8-bits: Port H Stop Mode Recovery En */

#ifdef Z16F_HAVE_GPIO_PORTJ
# define Z16F_GPIOJ_IN          _HX32(ffffe180) /*  8-bits: Port J Input Data */
# define Z16F_GPIOJ_OUT         _HX32(ffffe181) /*  8-bits: Port J Output Data */
# define Z16F_GPIOJ_DD          _HX32(ffffe182) /*  8-bits: Port J Data Direction */
# define Z16F_GPIOJ_HDE         _HX32(ffffe183) /*  8-bits: Port J High Drive Enable */
# define Z16F_GPIOJ_OC          _HX32(ffffe186) /*  8-bits: Port J Output Control */
# define Z16F_GPIOJ_PUE         _HX32(ffffe187) /*  8-bits: Port J Pull-Up Enable */
# define Z16F_GPIOJ_SMRE        _HX32(ffffe188) /*  8-bits: Port J Stop Mode Recovery En */
#endif

#ifdef Z16F_HAVE_GPIO_PORTK
# define Z16F_GPIOK_IN          _HX32(ffffe190) /*  8-bits: Port K Input Data */
# define Z16F_GPIOK_OUT         _HX32(ffffe191) /*  8-bits: Port K Output Data */
# define Z16F_GPIOK_DD          _HX32(ffffe192) /*  8-bits: Port K Data Direction */
# define Z16F_GPIOK_HDE         _HX32(ffffe193) /*  8-bits: Port K High Drive Enable */
# define Z16F_GPIOK_AFL         _HX32(ffffe195) /*  8-bits: Port K Alternate Function Low */
# define Z16F_GPIOK_OC          _HX32(ffffe196) /*  8-bits: Port K Output Control */
# define Z16F_GPIOK_PUE         _HX32(ffffe197) /*  8-bits: Port K Pull-Up Enable */
# define Z16F_GPIOK_SMRE        _HX32(ffffe198) /*  8-bits: Port K Stop Mode Recovery En */
#endif

/* UART Register Offsets *************************************************************/

#define Z16F_UART_TXD           _HX8(00)        /*  8-bits: UART Transmit Data */
#define Z16F_UART_RXD           _HX8(00)        /*  8-bits: UART Receive Data */
#define Z16F_UART_STAT0         _HX8(01)        /*  8-bits: UART Status 0 */
#define Z16F_UART_CTL           _HX8(02)        /* 16-bits: UART Control */
#  define Z16F_UART_CTL0        _HX8(02)        /*  8-bits: UART Control 0 */
#  define Z16F_UART_CTL1        _HX8(03)        /*  8-bits: UART COntrol 1 */
#define Z16F_UART_MDSTAT        _HX8(04)        /*  8-bits: UART Mode Select & Status */
#define Z16F_UART_ADDR          _HX8(05)        /*  8-bits: UART Address Compare */
#define Z16F_UART_BR            _HX8(06)        /* 16-bits: UART Baud Rate */
#  define Z16F_UART_BRH         _HX8(06)        /*  8-bits: UART Baud Rate High Byte */
#  define Z16F_UART_BRL         _HX8(07)        /*  8-bits: UART Baud Rate Low Byte */

#define Z16F_UART0_BASE         _HX32(ffffe200) /* UART0 Register Base Address */
#define Z16F_UART1_BASE         _HX32(ffffe210) /* UART1 Register Base Address */

/* UART0/1 Registers ****************************************************************/

#define Z16F_UART0_TXD          _HX32(ffffe200) /*  8-bits: UART0 Transmit Data */
#define Z16F_UART0_RXD          _HX32(ffffe200) /*  8-bits: UART0 Receive Data */
#define Z16F_UART0_STAT0        _HX32(ffffe201) /*  8-bits: UART0 Status 0 */
#define Z16F_UART0_CTL          _HX32(ffffe202) /* 16-bits: UART0 Control */
#  define Z16F_UART0_CTL0       _HX32(ffffe202) /*  8-bits: UART0 Control 0 */
#  define Z16F_UART0_CTL1       _HX32(ffffe203) /*  8-bits: UART0 COntrol 1 */
#define Z16F_UART0_MDSTAT       _HX32(ffffe204) /*  8-bits: UART0 Mode Select & Status */
#define Z16F_UART0_ADDR         _HX32(ffffe205) /*  8-bits: UART0 Address Compare */
#define Z16F_UART0_BR           _HX32(ffffe206) /* 16-bits: UART0 Baud Rate */
#  define Z16F_UART0_BRH        _HX32(ffffe206) /*  8-bits: UART0 Baud Rate High Byte */
#  define Z16F_UART0_BRL        _HX32(ffffe207) /*  8-bits: UART0 Baud Rate Low Byte */

#define Z16F_UART1_TXD          _HX32(ffffe210) /*  8-bits: UART1 Transmit Data */
#define Z16F_UART1_RXD          _HX32(ffffe210) /*  8-bits: UART1 Receive Data */
#define Z16F_UART1_STAT0        _HX32(ffffe211) /*  8-bits: UART1 Status 0 */
#define Z16F_UART1_CTL          _HX32(ffffe212) /* 16-bits: UART1 Control */
#  define Z16F_UART1_CTL0       _HX32(ffffe212) /*  8-bits: UART1 Control 0 */
#  define Z16F_UART1_CTL1       _HX32(ffffe213) /*  8-bits: UART1 COntrol 1 */
#define Z16F_UART1_MDSTAT       _HX32(ffffe214) /*  8-bits: UART1 Mode Select & Status */
#define Z16F_UART1_ADDR         _HX32(ffffe215) /*  8-bits: UART1 Address Compare */
#define Z16F_UART1_BR           _HX32(ffffe216) /* 16-bits: UART1 Baud Rate */
#  define Z16F_UART1_BRH        _HX32(ffffe216) /*  8-bits: UART1 Baud Rate High Byte */
#  define Z16F_UART1_BRL        _HX32(ffffe217) /*  8-bits: UART1 Baud Rate Low Byte */

/* UART0/1 Status 0 Register Bit Definitions ****************************************/

#define Z16F_UARTSTAT0_RDA      _HX8(80)        /* Bit 7: Receive Data Available */
#define Z16F_UARTSTAT0_PE       _HX8(40)        /* Bit 6: Parity Error */
#define Z16F_UARTSTAT0_OE       _HX8(20)        /* Bit 5: Overrun Error */
#define Z16F_UARTSTAT0_FE       _HX8(10)        /* Bit 4: Framing Error */
#define Z16F_UARTSTAT0_BRKD     _HX8(08)        /* Bit 3: Break Detect */
#define Z16F_UARTSTAT0_TDRE     _HX8(04)        /* Bit 2: Transmitter Data Register Empty */
#define Z16F_UARTSTAT0_TXE      _HX8(02)        /* Bit 1: Transmitter Empty */
#define Z16F_UARTSTAT0_CTS      _HX8(01)        /* Bit 0: Clear To Send */

/* UART0/1 Control 0/1 Register Bit Definitions *************************************/

#define Z16F_UARTCTL0_TEN      _HX8(80)        /* Bit 7: Transmit Enable */
#define Z16F_UARTCTL0_REN      _HX8(40)        /* Bit 6: Receive Enable */
#define Z16F_UARTCTL0_CTSE     _HX8(20)        /* Bit 5: CTS Enable */
#define Z16F_UARTCTL0_PEN      _HX8(10)        /* Bit 4: Parity Enable */
#define Z16F_UARTCTL0_PSEL     _HX8(08)        /* Bit 3: Odd Parity Select */
#define Z16F_UARTCTL0_SBRK     _HX8(04)        /* Bit 2: Send Break */
#define Z16F_UARTCTL0_STOP     _HX8(02)        /* Bit 1: Stop Bit Select */
#define Z16F_UARTCTL0_LBEN     _HX8(01)        /* Bit 0: Loopback Enable */

#define Z16F_UARTCTL1_MPMD1    _HX8(80)        /* Bit 7: Multiprocessor Mode (bit1) */
#define Z16F_UARTCTL1_MPEN     _HX8(40)        /* Bit 6: Multiprocessor Enable */
#define Z16F_UARTCTL1_MPMD0    _HX8(20)        /* Bit 5: Multiprocessor Mode (bit0) */
#define Z16F_UARTCTL1_MPBT     _HX8(10)        /* Bit 4: Multiprocessor Bit Transmit */
#define Z16F_UARTCTL1_DEPOL    _HX8(08)        /* Bit 3: Driver Enable Polarity */
#define Z16F_UARTCTL1_BRGCTL   _HX8(04)        /* Bit 2: Baud Rate Generator Control */
#define Z16F_UARTCTL1_RDAIRQ   _HX8(02)        /* Bit 1: Receive Data Interrupt Enable */
#define Z16F_UARTCTL1_IREN     _HX8(01)        /* Bit 0: Infrared Encoder/Decoder Eanble */

/* UART0/1 Mode Status/Select Register Bit Definitions ******************************/

#define Z16F_UARTMDSEL_NORMAL   _HX8(00)        /* Bits 5-7=0: Multiprocessor and Normal Mode */
#define Z16F_UARTMDSEL_FILTER   _HX8(20)        /* Bits 5-7=1: Noise Filter Control/Status */
#define Z16F_UARTMDSEL_LINP     _HX8(40)        /* Bits 5-7=2: LIN protocol Contol/Status */
#define Z16F_UARTMDSEL_HWREV    _HX8(e0)        /* Bits 5-7=7: LIN-UART Hardware Revision */
                                                /* Bits 0-4:   Mode dependent status */

/* Timer0/1/2 registers *************************************************************/

#define Z16F_TIMER0_HL          _HX32(ffffe300) /* 16-bit: Timer 0 */
#  define Z16F_TIMER0_H         _HX32(ffffe300) /*  8-bit: Timer 0 High Byte */
#  define Z16F_TIMER0_L         _HX32(ffffe301) /*  8-bit: Timer 0 Low Byte */
#define Z16F_TIMER0_R           _HX32(ffffe302) /* 16-bit: Timer 0 Reload */
#  define Z16F_TIMER0_RH        _HX32(ffffe302) /*  8-bit: Timer 0 Reload High Byte */
# define Z16F_TIMER0_RL         _HX32(ffffe303) /*  8-bit: Timer 0 Reload Low Byte */
#define Z16F_TIMER0_PWM         _HX32(ffffe304) /* 16-bit: Timer 0 PWM */
#  define Z16F_TIMER0_PWMH      _HX32(ffffe304) /*  8-bit: Timer 0 PWM High Byte */
#  define Z16F_TIMER0_PWML      _HX32(ffffe305) /*  8-bit: Timer 0 PWM Low Byte */
#define Z16F_TIMER0_CTL         _HX32(ffffe306) /* 16-bit: Timer 0 Control */
#  define Z16F_TIMER0_CTL0      _HX32(ffffe306) /*  8-bit: Timer 0 Control 0 */
#  define Z16F_TIMER0_CTL1      _HX32(ffffe307) /*  8-bit: Timer 0 Control 1 */

#define Z16F_TIMER1_HL          _HX32(ffffe310) /* 16-bit: Timer 1 */
#  define Z16F_TIMER1_H         _HX32(ffffe310) /*  8-bit: Timer 1 High Byte */
#  define Z16F_TIMER1_L         _HX32(ffffe311) /*  8-bit: Timer 1 Low Byte */
#define Z16F_TIMER1_R           _HX32(ffffe312) /* 16-bit: Timer 1 Reload */
#  define Z16F_TIMER1_RH        _HX32(ffffe312) /*  8-bit: Timer 1 Reload High Byte */
#  define Z16F_TIMER1_RL        _HX32(ffffe313) /*  8-bit: Timer 1 Reload Low Byte */
#define Z16F_TIMER1_PWM         _HX32(ffffe314) /* 16-bit: Timer 1 PWM */
#  define Z16F_TIMER1_PWMH      _HX32(ffffe314) /*  8-bit: Timer 1 PWM High Byte */
#  define Z16F_TIMER1_PWML      _HX32(ffffe315) /*  8-bit: Timer 1 PWM Low Byte */
#define Z16F_TIMER1_CTL         _HX32(ffffe316) /* 16-bit: Timer 1 Control */
#  define Z16F_TIMER1_CTL0      _HX32(ffffe316) /*  8-bit: Timer 1 Control 0 */
#  define Z16F_TIMER1_CTL1      _HX32(ffffe317) /*  8-bit: Timer 1 Control 1 */

#define Z16F_TIMER2_HL          _HX32(ffffe320) /* 16-bit: Timer 2 */
#  define Z16F_TIMER2_H         _HX32(ffffe320) /*  8-bit: Timer 2 High Byte */
#  define Z16F_TIMER2_L         _HX32(ffffe321) /*  8-bit: Timer 2 Low Byte */
#define Z16F_TIMER2_R           _HX32(ffffe322) /* 16-bit: Timer 2 Reload */
#  define Z16F_TIMER2_RH        _HX32(ffffe322) /*  8-bit: Timer 2 Reload High Byte */
#  define Z16F_TIMER2_RL        _HX32(ffffe323) /*  8-bit: Timer 2 Reload Low Byte */
#define Z16F_TIMER2_PWM         _HX32(ffffe324) /* 16-bit: Timer 2 PWM */
#  define Z16F_TIMER2_PWMH      _HX32(ffffe324) /*  8-bit: Timer 2 PWM High Byte */
#  define Z16F_TIMER2_PWML      _HX32(ffffe325) /*  8-bit: Timer 2 PWM Low Byte */
#define Z16F_TIMER2_CTL         _HX32(ffffe326) /* 16-bit: Timer 2 Control */
#  define Z16F_TIMER2_CTL0      _HX32(ffffe326) /*  8-bit: Timer 2 Control 0 */
#  define Z16F_TIMER2_CTL1      _HX32(ffffe327) /*  8-bit: Timer 2 Control 1 */

/* Common timer0/1/2 register bit definitions ***************************************/

#define Z16F_TIMERCTL0_TMODE    _HX8(80)        /* Bit 7: Timer mode */
                                                /* Bits 5-6: Timer configuration,
                                                 * Interpretation depends on timer mode */
#define Z16F_TIMERCTL0_RELOAD    _HX8(00)       /*   Interrupt occurs on reload or capture */
#define Z16F_TIMERCTL0_IDISABLED _HX8(40)       /*   Disabled */
#define Z16F_TIMERCTL0_IINACTIVE _HX8(40)       /*   Interrrupt occurs on inactive gate edge */
#define Z16F_TIMERCTL0_ICAPTURE  _HX8(40)       /*   Interrupt occurs on capture */
#define Z16F_TIMERCTL0_IRELOAD   _HX8(60)       /*   Interrupt occurs on reload */
#define Z16F_TIMERCTL0_CASCADE   _HX8(10)       /* Bit 4: Timer is cascaded */
                                                /* Bits 1-2: PW mode */
#define Z16F_TIMERCTL0_NODELAY   _HZ8(00)       /*    No delay */
#define Z16F_TIMERCTL0_DELAY2    _HZ8(01)       /*      2 cycle delay */
#define Z16F_TIMERCTL0_DELAY4    _HZ8(02)       /*      4 cycle delay */
#define Z16F_TIMERCTL0_DELAY8    _HZ8(03)       /*      8 cycle delay */
#define Z16F_TIMERCTL0_DELAY16   _HZ8(04)       /*     16 cycle delay */
#define Z16F_TIMERCTL0_DELAY32   _HZ8(05)       /*     32 cycle delay */
#define Z16F_TIMERCTL0_DELAY64   _HZ8(06)       /*     64 cycle delay */
#define Z16F_TIMERCTL0_DELAY128  _HZ8(07)       /*    128 cycle delay */

#define Z16F_TIMERCTL1_TEN       _HX8(80)       /* Bit 7: Timer enable */
#define Z16F_TIMERCTL1_TPOL      _HX8(40)       /* Bit 6: Input output polarity */
                                                /* Bits 3-5: Timer prescale value */
#define Z16F_TIMERSCTL1_DIV1     _HX8(00)       /*   Divide by   1 */
#define Z16F_TIMERSCTL1_DIV2     _HX8(08)       /*   Divide by   2 */
#define Z16F_TIMERSCTL1_DIV4     _HX8(10)       /*   Divide by   4 */
#define Z16F_TIMERSCTL1_DIV8     _HX8(18)       /*   Divide by   8 */
#define Z16F_TIMERSCTL1_DIV16    _HX8(20)       /*   Divide by  16 */
#define Z16F_TIMERSCTL1_DIV32    _HX8(28)       /*   Divide by  32 */
#define Z16F_TIMERSCTL1_DIV64    _HX8(30)       /*   Divide by  64 */
#define Z16F_TIMERSCTL1_DIV128   _HX8(38)       /*   Divide by 128 */
                                                /* Bits 0-2: Timer mode + CTL0 TMODE bit*/
#define Z16F_TIMERSCTL1_ONESHOT  _HX8(00)       /*   One shot mode (CTL0 TMOD = 0) */
#define Z16F_TIMERSCTL1_PWMDO    _HX8(00)       /*   One shot mode (CTL0 TMOD = 1) */
#define Z16F_TIMERSCTL1_CONT     _HX8(01)       /*   Continuous mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CAPRST   _HX8(01)       /*   Capture restart mode (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_COUNTER  _HX8(02)       /*   Counter mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CMPCNTR  _HX8(02)       /*   Comparator counter mode (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_PWMSO    _HX8(03)       /*   PWM single output mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_TRIGOS   _HX8(03)       /*   Triggered one shot (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_CAPTURE  _HX8(04)       /*   Capture mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_COMPARE  _HX8(05)       /*   Compare mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_GATED    _HX8(06)       /*   Gated mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CAPCMP   _HX8(07)       /*   Capture/Compare mode (CTL0 TMOD = 0)*/

/* Register access macros ***********************************************************/

#ifndef __ASSEMBLY__
# define getreg8(a)           (*(uint8_t volatile _Near*)(a))
# define putreg8(v,a)         (*(uint8_t volatile _Near*)(a) = (v))
# define getreg16(a)          (*(uint16_t volatile _Near*)(a))
# define putreg16(v,a)        (*(uint16_t volatile _Near*)(a) = (v))
# define getreg32(a)          (*(uint32_t volatile _Near*)(a))
# define putreg32(v,a)        (*(uint32_t volatile _Near*)(a) = (v))
#endif /* __ASSEMBLY__ */

/************************************************************************************
 * Public Function Prototypes
 ************************************************************************************/

#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/* The following two routines are called from the low-level reset logic.  z16f_lowinit()
 * must be provided by the board-specific logic; z16f_lowuartinit() is called only if
 * debugging support for up_lowputc (or getc) is enabled.
 */

void z16f_lowinit(void);
#if defined(CONFIG_Z16_LOWPUTC) || defined(CONFIG_Z16_LOWGETC)
void z16f_lowuartinit(void);
#endif

/* This function handles Z16F system execeptions */

void z16f_sysexec(FAR chipreg_t *regs);

/* Entry point to reset the processor */

void z16f_reset(void);

#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */

#endif  /* __ARCH_Z16_SRC_Z16F_CHIP_H */