diff options
Diffstat (limited to 'pylintrc')
-rw-r--r-- | pylintrc | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/pylintrc b/pylintrc deleted file mode 100644 index 0617759603..0000000000 --- a/pylintrc +++ /dev/null @@ -1,404 +0,0 @@ -# -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed with -# this work for additional information regarding copyright ownership. -# The ASF licenses this file to You under the Apache License, Version 2.0 -# (the "License"); you may not use this file except in compliance with -# the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -[MASTER] - -# Specify a configuration file. -#rcfile= - -# Python code to execute, usually for sys.path manipulation such as -# pygtk.require(). -#init-hook= - -# Profiled execution. -profile=no - -# Add files or directories to the blacklist. They should be base names, not -# paths. -ignore=pyspark.heapq3 - -# Pickle collected data for later comparisons. -persistent=yes - -# List of plugins (as comma separated values of python modules names) to load, -# usually to register additional checkers. -load-plugins= - -# Use multiple processes to speed up Pylint. -jobs=1 - -# Allow loading of arbitrary C extensions. Extensions are imported into the -# active Python interpreter and may run arbitrary code. -unsafe-load-any-extension=no - -# A comma-separated list of package or module names from where C extensions may -# be loaded. Extensions are loading into the active Python interpreter and may -# run arbitrary code -extension-pkg-whitelist= - -# Allow optimization of some AST trees. This will activate a peephole AST -# optimizer, which will apply various small optimizations. For instance, it can -# be used to obtain the result of joining multiple strings with the addition -# operator. Joining a lot of strings can lead to a maximum recursion error in -# Pylint and this flag can prevent that. It has one side effect, the resulting -# AST will be different than the one from reality. -optimize-ast=no - - -[MESSAGES CONTROL] - -# Only show warnings with the listed confidence levels. Leave empty to show -# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED -confidence= - -# Enable the message, report, category or checker with the given id(s). You can -# either give multiple identifier separated by comma (,) or put this option -# multiple time. See also the "--disable" option for examples. -enable= - -# Disable the message, report, category or checker with the given id(s). You -# can either give multiple identifiers separated by comma (,) or put this -# option multiple times (only on the command line, not in the configuration -# file where it should appear only once).You can also use "--disable=all" to -# disable everything first and then reenable specific checks. For example, if -# you want to run only the similarities checker, you can use "--disable=all -# --enable=similarities". If you want to run only the classes checker, but have -# no Warning level messages displayed, use"--disable=all --enable=classes -# --disable=W" - -# These errors are arranged in order of number of warning given in pylint. -# If you would like to improve the code quality of pyspark, remove any of these disabled errors -# run ./dev/lint-python and see if the errors raised by pylint can be fixed. - -disable=invalid-name,missing-docstring,protected-access,unused-argument,no-member,unused-wildcard-import,redefined-builtin,too-many-arguments,unused-variable,too-few-public-methods,bad-continuation,duplicate-code,redefined-outer-name,too-many-ancestors,import-error,superfluous-parens,unused-import,line-too-long,no-name-in-module,unnecessary-lambda,import-self,no-self-use,unidiomatic-typecheck,fixme,too-many-locals,cyclic-import,too-many-branches,bare-except,wildcard-import,dangerous-default-value,broad-except,too-many-public-methods,deprecated-lambda,anomalous-backslash-in-string,too-many-lines,reimported,too-many-statements,bad-whitespace,unpacking-non-sequence,too-many-instance-attributes,abstract-method,old-style-class,global-statement,attribute-defined-outside-init,arguments-differ,undefined-all-variable,no-init,useless-else-on-loop,super-init-not-called,notimplemented-raised,too-many-return-statements,pointless-string-statement,global-variable-undefined,bad-classmethod-argument,too-many-format-args,parse-error,no-self-argument,pointless-statement,undefined-variable - - -[REPORTS] - -# Set the output format. Available formats are text, parseable, colorized, msvs -# (visual studio) and html. You can also give a reporter class, eg -# mypackage.mymodule.MyReporterClass. -output-format=text - -# Put messages in a separate file for each module / package specified on the -# command line instead of printing them on stdout. Reports (if any) will be -# written in a file name "pylint_global.[txt|html]". -files-output=no - -# Tells whether to display a full report or only the messages -reports=no - -# Python expression which should return a note less than 10 (10 is the highest -# note). You have access to the variables errors warning, statement which -# respectively contain the number of errors / warnings messages and the total -# number of statements analyzed. This is used by the global evaluation report -# (RP0004). -evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) - -# Add a comment according to your evaluation note. This is used by the global -# evaluation report (RP0004). -comment=no - -# Template used to display messages. This is a python new-style format string -# used to format the message information. See doc for all details -#msg-template= - - -[MISCELLANEOUS] - -# List of note tags to take in consideration, separated by a comma. -notes=FIXME,XXX,TODO - - -[BASIC] - -# Required attributes for module, separated by a comma -required-attributes= - -# List of builtins function names that should not be used, separated by a comma -bad-functions= - -# Good variable names which should always be accepted, separated by a comma -good-names=i,j,k,ex,Run,_ - -# Bad variable names which should always be refused, separated by a comma -bad-names=baz,toto,tutu,tata - -# Colon-delimited sets of names that determine each other's naming style when -# the name regexes allow several styles. -name-group= - -# Include a hint for the correct naming format with invalid-name -include-naming-hint=no - -# Regular expression matching correct function names -function-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Naming hint for function names -function-name-hint=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression matching correct variable names -variable-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Naming hint for variable names -variable-name-hint=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression matching correct constant names -const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ - -# Naming hint for constant names -const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$ - -# Regular expression matching correct attribute names -attr-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Naming hint for attribute names -attr-name-hint=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression matching correct argument names -argument-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Naming hint for argument names -argument-name-hint=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression matching correct class attribute names -class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ - -# Naming hint for class attribute names -class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ - -# Regular expression matching correct inline iteration names -inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ - -# Naming hint for inline iteration names -inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$ - -# Regular expression matching correct class names -class-rgx=[A-Z_][a-zA-Z0-9]+$ - -# Naming hint for class names -class-name-hint=[A-Z_][a-zA-Z0-9]+$ - -# Regular expression matching correct module names -module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ - -# Naming hint for module names -module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ - -# Regular expression matching correct method names -method-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Naming hint for method names -method-name-hint=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match function or class names that do -# not require a docstring. -no-docstring-rgx=__.*__ - -# Minimum line length for functions/classes that require docstrings, shorter -# ones are exempt. -docstring-min-length=-1 - - -[FORMAT] - -# Maximum number of characters on a single line. -max-line-length=100 - -# Regexp for a line that is allowed to be longer than the limit. -ignore-long-lines=^\s*(# )?<?https?://\S+>?$ - -# Allow the body of an if to be on the same line as the test if there is no -# else. -single-line-if-stmt=no - -# List of optional constructs for which whitespace checking is disabled -no-space-check=trailing-comma,dict-separator - -# Maximum number of lines in a module -max-module-lines=1000 - -# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 -# tab). -indent-string=' ' - -# Number of spaces of indent required inside a hanging or continued line. -indent-after-paren=4 - -# Expected format of line ending, e.g. empty (any line ending), LF or CRLF. -expected-line-ending-format= - - -[SIMILARITIES] - -# Minimum lines number of a similarity. -min-similarity-lines=4 - -# Ignore comments when computing similarities. -ignore-comments=yes - -# Ignore docstrings when computing similarities. -ignore-docstrings=yes - -# Ignore imports when computing similarities. -ignore-imports=no - - -[VARIABLES] - -# Tells whether we should check for unused import in __init__ files. -init-import=no - -# A regular expression matching the name of dummy variables (i.e. expectedly -# not used). -dummy-variables-rgx=_$|dummy - -# List of additional names supposed to be defined in builtins. Remember that -# you should avoid to define new builtins when possible. -additional-builtins= - -# List of strings which can identify a callback function by name. A callback -# name must start or end with one of those strings. -callbacks=cb_,_cb - - -[SPELLING] - -# Spelling dictionary name. Available dictionaries: none. To make it working -# install python-enchant package. -spelling-dict= - -# List of comma separated words that should not be checked. -spelling-ignore-words= - -# A path to a file that contains private dictionary; one word per line. -spelling-private-dict-file= - -# Tells whether to store unknown words to indicated private dictionary in -# --spelling-private-dict-file option instead of raising a message. -spelling-store-unknown-words=no - - -[LOGGING] - -# Logging modules to check that the string format arguments are in logging -# function parameter format -logging-modules=logging - - -[TYPECHECK] - -# Tells whether missing members accessed in mixin class should be ignored. A -# mixin class is detected if its name ends with "mixin" (case insensitive). -ignore-mixin-members=yes - -# List of module names for which member attributes should not be checked -# (useful for modules/projects where namespaces are manipulated during runtime -# and thus existing member attributes cannot be deduced by static analysis -ignored-modules= - -# List of classes names for which member attributes should not be checked -# (useful for classes with attributes dynamically set). -ignored-classes=SQLObject - -# When zope mode is activated, add a predefined set of Zope acquired attributes -# to generated-members. -zope=no - -# List of members which are set dynamically and missed by pylint inference -# system, and so shouldn't trigger E0201 when accessed. Python regular -# expressions are accepted. -generated-members=REQUEST,acl_users,aq_parent - - -[CLASSES] - -# List of interface methods to ignore, separated by a comma. This is used for -# instance to not check methods defines in Zope's Interface base class. -ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by - -# List of method names used to declare (i.e. assign) instance attributes. -defining-attr-methods=__init__,__new__,setUp - -# List of valid names for the first argument in a class method. -valid-classmethod-first-arg=cls - -# List of valid names for the first argument in a metaclass class method. -valid-metaclass-classmethod-first-arg=mcs - -# List of member names, which should be excluded from the protected access -# warning. -exclude-protected=_asdict,_fields,_replace,_source,_make - - -[IMPORTS] - -# Deprecated modules which should not be used, separated by a comma -deprecated-modules=regsub,TERMIOS,Bastion,rexec - -# Create a graph of every (i.e. internal and external) dependencies in the -# given file (report RP0402 must not be disabled) -import-graph= - -# Create a graph of external dependencies in the given file (report RP0402 must -# not be disabled) -ext-import-graph= - -# Create a graph of internal dependencies in the given file (report RP0402 must -# not be disabled) -int-import-graph= - - -[DESIGN] - -# Maximum number of arguments for function / method -max-args=5 - -# Argument names that match this expression will be ignored. Default to name -# with leading underscore -ignored-argument-names=_.* - -# Maximum number of locals for function / method body -max-locals=15 - -# Maximum number of return / yield for function / method body -max-returns=6 - -# Maximum number of branch for function / method body -max-branches=12 - -# Maximum number of statements in function / method body -max-statements=50 - -# Maximum number of parents for a class (see R0901). -max-parents=7 - -# Maximum number of attributes for a class (see R0902). -max-attributes=7 - -# Minimum number of public methods for a class (see R0903). -min-public-methods=2 - -# Maximum number of public methods for a class (see R0904). -max-public-methods=20 - - -[EXCEPTIONS] - -# Exceptions that will emit a warning when being caught. Defaults to -# "Exception" -overgeneral-exceptions=Exception |