blob: d8cc0e91324095d38f8665da75d3501cc1e0b9ef (
plain) (
tree)
|
|
#!nsh
echo "[init] 3DR Iris Quad"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 9.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.2
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
commander start
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.0098
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1200
pwm max -c 1234 -p 1800
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
|