blob: 9892049526bf49f48c29b6253222d1134bdc20cf (
plain) (
tree)
|
|
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on FX-79 Buffalo"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MAX 20
param set FW_AIRSPD_TRIM 12
param set FW_AIRSPD_MIN 15
param set FW_L1_PERIOD 12
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 80
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.75
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 1.1
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_FX79.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_FX79.mix
else
echo "Using /etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_FX79.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
|