blob: eae37098bdead75800263b0b01490c21cf34c10d (
plain) (
tree)
|
|
#!nsh
echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with PWM outputs"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_YAWPOS_D 0
param set MC_YAWPOS_I 0
param set MC_YAWPOS_P 0.6
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.08
param set RC_SCALE_PITCH 1
param set RC_SCALE_ROLL 1
param set RC_SCALE_YAW 3
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
#
# Start MAVLink
#
mavlink start -d /dev/ttyS0 -b 57600
usleep 5000
#
# Start PWM output
#
fmu mode_pwm
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
# Exit, because /dev/ttyS0 is needed for MAVLink
exit
|