/****************************************************************************
* range_cal.c
*
* Copyright (C) 2012 Nils Wenzler. All rights reserved.
* Authors: Nils Wenzler <wenzlern@ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include "calibration.h"
/****************************************************************************
* Defines
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
//Store the values here before writing them to global_data_rc_channels
uint16_t max_values[NR_CHANNELS];
uint16_t min_values[NR_CHANNELS];
uint16_t mid_values[NR_CHANNELS];
/****************************************************************************
* Private Functions
****************************************************************************/
/**This sets the middle values
*/
uint8_t set_mid(void)
{
if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) {
uint8_t i;
for (i = 0; i < NR_CHANNELS; i++) {
if (i == global_data_rc_channels->function[ROLL] ||
i == global_data_rc_channels->function[YAW] ||
i == global_data_rc_channels->function[PITCH]) {
mid_values[i] = global_data_rc_channels->chan[i].raw;
} else {
mid_values[i] = (max_values[i] + min_values[i]) / 2;
}
}
global_data_unlock(&global_data_rc_channels->access_conf);
return 0;
} else
return -1;
}
/**This gets all current values and writes them to min or max
*/
uint8_t get_value(void)
{
if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) {
uint8_t i;
for (i = 0; i < NR_CHANNELS; i++) {
//see if the value is bigger or smaller than 1500 (roughly neutral)
//and write to the appropriate array
if (global_data_rc_channels->chan[i].raw != 0 &&
global_data_rc_channels->chan[i].raw < 1500) {
min_values[i] = global_data_rc_channels->chan[i].raw;
} else if (global_data_rc_channels->chan[i].raw != 0 &&
global_data_rc_channels->chan[i].raw > 1500) {
max_values[i] = global_data_rc_channels->chan[i].raw;
} else {
max_values[i] = 0;
min_values[i] = 0;
}
}
global_data_unlock(&global_data_rc_channels->access_conf);
return 0;
} else
return -1;
}
void write_data(void)
{
// global_data_lock(&global_data_rc_channels->access_conf);
// uint8_t i;
// for(i=0; i < NR_CHANNELS; i++){
// //Write the data to global_data_rc_channels (if not 0)
// if(mid_values[i]!=0 && min_values[i]!=0 && max_values[i]!=0){
// global_data_rc_channels->chan[i].scaling_factor =
// 10000/((max_values[i] - min_values[i])/2);
//
// global_data_rc_channels->chan[i].mid = mid_values[i];
// }
//
// printf("Channel %i\t Function %s \t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n",
// i,
// global_data_rc_channels->function_name[global_data_rc_channels->function[i]],
// min_values[i], max_values[i],
// global_data_rc_channels->chan[i].scaling_factor,
// global_data_rc_channels->chan[i].mid);
// }
// global_data_unlock(&global_data_rc_channels->access_conf);
//Write to the Parameter storage
global_data_parameter_storage->pm.param_values[PARAM_RC1_MIN] = min_values[0];
global_data_parameter_storage->pm.param_values[PARAM_RC2_MIN] = min_values[1];
global_data_parameter_storage->pm.param_values[PARAM_RC3_MIN] = min_values[2];
global_data_parameter_storage->pm.param_values[PARAM_RC4_MIN] = min_values[3];
global_data_parameter_storage->pm.param_values[PARAM_RC5_MIN] = min_values[4];
global_data_parameter_storage->pm.param_values[PARAM_RC6_MIN] = min_values[5];
global_data_parameter_storage->pm.param_values[PARAM_RC7_MIN] = min_values[6];
global_data_parameter_storage->pm.param_values[PARAM_RC8_MIN] = min_values[7];
global_data_parameter_storage->pm.param_values[PARAM_RC1_MAX] = max_values[0];
global_data_parameter_storage->pm.param_values[PARAM_RC2_MAX] = max_values[1];
global_data_parameter_storage->pm.param_values[PARAM_RC3_MAX] = max_values[2];
global_data_parameter_storage->pm.param_values[PARAM_RC4_MAX] = max_values[3];
global_data_parameter_storage->pm.param_values[PARAM_RC5_MAX] = max_values[4];
global_data_parameter_storage->pm.param_values[PARAM_RC6_MAX] = max_values[5];
global_data_parameter_storage->pm.param_values[PARAM_RC7_MAX] = max_values[6];
global_data_parameter_storage->pm.param_values[PARAM_RC8_MAX] = max_values[7];
global_data_parameter_storage->pm.param_values[PARAM_RC1_TRIM] = mid_values[0];
global_data_parameter_storage->pm.param_values[PARAM_RC2_TRIM] = mid_values[1];
global_data_parameter_storage->pm.param_values[PARAM_RC3_TRIM] = mid_values[2];
global_data_parameter_storage->pm.param_values[PARAM_RC4_TRIM] = mid_values[3];
global_data_parameter_storage->pm.param_values[PARAM_RC5_TRIM] = mid_values[4];
global_data_parameter_storage->pm.param_values[PARAM_RC6_TRIM] = mid_values[5];
global_data_parameter_storage->pm.param_values[PARAM_RC7_TRIM] = mid_values[6];
global_data_parameter_storage->pm.param_values[PARAM_RC8_TRIM] = mid_values[7];
usleep(3e6);
uint8_t i;
for (i = 0; i < NR_CHANNELS; i++) {
printf("Channel %i:\t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n",
i,
min_values[i], max_values[i],
global_data_rc_channels->chan[i].scaling_factor,
global_data_rc_channels->chan[i].mid);
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
int range_cal(int argc, char *argv[])
{
printf("The range calibration routine assumes you already did the channel\n");
printf("assignment\n");
printf("This routine chooses the minimum, maximum and middle\n");
printf("value for each channel separatly. The ROLL, PITCH and YAW function\n");
printf("get their middle value from the RC direct, for the rest it is\n");
printf("calculated out of the min and max values.\n");
press_enter();
printf("Hold both sticks in lower left corner and continue\n ");
press_enter();
usleep(500000);
while (get_value());
printf("Hold both sticks in upper right corner and continue\n");
press_enter();
usleep(500000);
while (get_value());
printf("Set the trim to 0 and leave the sticks in the neutral position\n");
press_enter();
//Loop until successfull
while (set_mid());
//write the values to global_data_rc_channels
write_data();
return 0;
}