/* Structure for storage of parameters */
#ifndef GLOBAL_DATA_PARAMETER_STORAGE_T_H_ //adjust this line!
#define GLOBAL_DATA_PARAMETER_STORAGE_T_H_ //adjust this line!
#define PX4_MSG_PARAM_VALUE_FIELD_PARAM_ID_LEN 16
#define MAX_PARAM_NAME_LEN 16
#include <stdbool.h>
#include <stdint.h>
enum MODE {
TAKEOFF = 1,
CRUISE,
LOITER,
LAND
};
enum PARAM {
PARAM_SYSTEM_ID = 0, ///< System ID used for communication
PARAM_COMP_ID, ///< Component ID
PARAM_FLIGHT_ENV, ///< Flight environment, indoor or outdoor
PARAM_BATTERYVOLTAGE_CONVERSION, ///< Conversion factor from adc measurement to millivolts. if not set the sensor app will use the default value for the ardrone board
PARAM_PID_YAWPOS_P,
PARAM_PID_YAWPOS_I,
PARAM_PID_YAWPOS_D,
PARAM_PID_YAWPOS_AWU,
PARAM_PID_YAWPOS_LIM,
PARAM_PID_YAWSPEED_P,
PARAM_PID_YAWSPEED_I,
PARAM_PID_YAWSPEED_D,
PARAM_PID_YAWSPEED_AWU,
PARAM_PID_YAWSPEED_LIM,
PARAM_PID_ATT_P,
PARAM_PID_ATT_I,
PARAM_PID_ATT_D,
PARAM_PID_ATT_AWU,
PARAM_PID_ATT_LIM,
PARAM_PID_POS_P,
PARAM_PID_POS_I,
PARAM_PID_POS_D,
PARAM_PID_POS_AWU,
PARAM_PID_POS_LIM,
PARAM_PID_POS_Z_P,
PARAM_PID_POS_Z_I,
PARAM_PID_POS_Z_D,
PARAM_PID_POS_Z_AWU,
PARAM_PID_POS_Z_LIM,
PARAM_AIRSPEED,
PARAM_WPLON,
PARAM_WPLAT,
PARAM_WPALT,
PARAM_FLIGHTMODE,
PARAM_SENSOR_GYRO_XOFFSET,
PARAM_SENSOR_GYRO_YOFFSET,
PARAM_SENSOR_GYRO_ZOFFSET,
PARAM_SENSOR_MAG_XOFFSET,
PARAM_SENSOR_MAG_YOFFSET,
PARAM_SENSOR_MAG_ZOFFSET,
PARAM_ATT_XOFFSET,
PARAM_ATT_YOFFSET,
PARAM_RC1_MIN,
PARAM_RC1_MAX,
PARAM_RC1_TRIM,
PARAM_RC1_REV,
PARAM_RC2_MIN,
PARAM_RC2_MAX,
PARAM_RC2_TRIM,
PARAM_RC2_REV,
PARAM_RC3_MIN,
PARAM_RC3_MAX,
PARAM_RC3_TRIM,
PARAM_RC3_REV,
PARAM_RC4_MIN,
PARAM_RC4_MAX,
PARAM_RC4_TRIM,
PARAM_RC4_REV,
PARAM_RC5_MIN,
PARAM_RC5_MAX,
PARAM_RC5_TRIM,
PARAM_RC5_REV,
PARAM_RC6_MIN,
PARAM_RC6_MAX,
PARAM_RC6_TRIM,
PARAM_RC6_REV,
PARAM_RC7_MIN,
PARAM_RC7_MAX,
PARAM_RC7_TRIM,
PARAM_RC7_REV,
PARAM_RC8_MIN,
PARAM_RC8_MAX,
PARAM_RC8_TRIM,
PARAM_RC8_REV,
PARAM_THROTTLE_CHAN,
PARAM_ROLL_CHAN,
PARAM_PITCH_CHAN,
PARAM_YAW_CHAN,
PARAM_OVERRIDE_CHAN,
PARAM_SERVO1_MIN,
PARAM_SERVO1_MAX,
PARAM_SERVO1_TRIM,
PARAM_SERVO2_MIN,
PARAM_SERVO2_MAX,
PARAM_SERVO2_TRIM,
PARAM_SERVO3_MIN,
PARAM_SERVO3_MAX,
PARAM_SERVO3_TRIM,
PARAM_SERVO4_MIN,
PARAM_SERVO4_MAX,
PARAM_SERVO4_TRIM,
PARAM_SERVO_SCALE,
PARAM_MAX_COUNT ///< LEAVE THIS IN PLACE AS LAST ELEMENT!
};
struct px4_parameter_storage_t {
float param_values[PARAM_MAX_COUNT]; ///< Parameter values
const char *param_names[PARAM_MAX_COUNT]; ///< Parameter names
bool param_needs_write[PARAM_MAX_COUNT];
uint16_t next_param;
uint16_t size;
};
#define PX4_FLIGHT_ENVIRONMENT_INDOOR 0
#define PX4_FLIGHT_ENVIRONMENT_OUTDOOR 1
#define PX4_FLIGHT_ENVIRONMENT_TESTING 2 //NO check for position fix in this environment
struct global_data_parameter_storage_t {
/* use of a counter and timestamp recommended (but not necessary) */
// uint16_t counter; //incremented by the writing thread everytime new data is stored
// uint64_t timestamp; //in microseconds since system start, is set whenever the writing thread stores new data
/* Actual data, this is specific to the type of data which is stored in this struct */
//***** Start: Add your variables here *****
/* Parameters (set by a param_set mavlink message */
struct px4_parameter_storage_t pm;
//*****END: Add your variables here *****
};
__attribute__ ((visibility ("default"))) extern struct global_data_parameter_storage_t *global_data_parameter_storage; //adjust this line!
#endif
