#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
choice
prompt "LPC43XX Chip Selection"
default ARCH_CHIP_LPC4330FET100
depends on ARCH_CHIP_LPC43XX
config ARCH_CHIP_LPC4310FBD144
bool "LPC4310FBD144"
config ARCH_CHIP_LPC4310FET100
bool "LPC4310FET100"
config ARCH_CHIP_LPC4320FBD144
bool "LPC4320FBD144"
config ARCH_CHIP_LPC4320FET100
bool "LPC4320FET100"
config ARCH_CHIP_LPC4330FBD144
bool "LPC4330FBD144"
config ARCH_CHIP_LPC4330FET100
bool "LPC4330FET100"
config ARCH_CHIP_LPC4330FET180
bool "LPC4330FET180"
config ARCH_CHIP_LPC4330FET256
bool "LPC4330FET256"
config ARCH_CHIP_LPC4350FBD208
bool "LPC4350FBD208"
config ARCH_CHIP_LPC4350FET180
bool "LPC4350FET180"
config ARCH_CHIP_LPC4350FET256
bool "LPC4350FET256"
config ARCH_CHIP_LPC4353FBD208
bool "LPC4353FBD208"
config ARCH_CHIP_LPC4353FET180
bool "LPC4353FET180"
config ARCH_CHIP_LPC4353FET256
bool "LPC4353FET256"
config ARCH_CHIP_LPC4357FET180
bool "LPC4357FET180"
config ARCH_CHIP_LPC4357FBD208
bool "LPC4357FBD208"
config ARCH_CHIP_LPC4357FET256
bool "LPC4357FET256"
endchoice
config ARCH_FAMILY_LPC4310
bool
default y if ARCH_CHIP_LPC4310FBD144 || ARCH_CHIP_LPC4310FET100
config ARCH_FAMILY_LPC4320
bool
default y if ARCH_CHIP_LPC4320FBD144 || ARCH_CHIP_LPC4320FET100
config ARCH_FAMILY_LPC4330
bool
default y if ARCH_CHIP_LPC4330FBD144 || ARCH_CHIP_LPC4330FET100 || ARCH_CHIP_LPC4330FET180 || ARCH_CHIP_LPC4330FET256
config ARCH_FAMILY_LPC4350
bool
default y if ARCH_CHIP_LPC4350FBD208 || ARCH_CHIP_LPC4350FET180 || ARCH_CHIP_LPC4350FET256
config ARCH_FAMILY_LPC4353
bool
default y if ARCH_CHIP_LPC4353FBD208 || ARCH_CHIP_LPC4353FET180 || ARCH_CHIP_LPC4353FET256
config ARCH_FAMILY_LPC4357
bool
default y if ARCH_CHIP_LPC4357FET180 || ARCH_CHIP_LPC4357FBD208 || ARCH_CHIP_LPC4357FET256
config ARCH_CORTEXM3
bool
default n if !ARCH_CHIP_LPC43XX
config ARCH_CORTEXM4
bool
default y if ARCH_CHIP_LPC43XX
config ARCH_FPU
bool "FPU support"
default y
depends on ARCH_CORTEXM4
---help---
Build in support for the ARM Cortex-M4 FPU.
choice
prompt "LPC43XX Boot Configuration"
default CONFIG_BOOT_SRAM
depends on ARCH_CHIP_LPC43XX
---help---
The startup code needs to know if the code is running from internal FLASH,
external FLASH, SPIFI, or SRAM in order to initialize properly. Note that
a boot device is not specified for cases where the code is copied into SRAM;
those cases are all covered by BOOT_SRAM.
config BOOT_SRAM
bool "Running from SRAM"
config BOOT_SPIFI
bool "Running from QuadFLASH"
config BOOT_FLASHA
bool "Running in internal FLASHA"
config BOOT_FLASHB
bool "Running in internal FLASHA"
config BOOT_CS0FLASH
bool "Running in external FLASH CS0"
config BOOT_CS1FLASH
bool "Running in external FLASH CS1"
config BOOT_CS2FLASH
bool "Running in external FLASH CS2"
config BOOT_CS3FLASH
bool "Running in external FLASH CS3"
endchoice
menu "LPC43xx Peripheral Support"
config LPC43_ADC0
bool "ADC0"
default n
config LPC43_ADC1
bool "ADC1"
default n
config LPC43_ATIMER
bool "Alarm timer"
default n
config LPC43_CAN1
bool "C_CAN1"
default n
config LPC43_CAN2
bool "C_CAN1"
default n
config LPC43_DAC
bool "DAC"
default n
config LPC43_EMC
bool "External Memory Controller (EMC)"
default n
config LPC43_ETHERNET
bool "Ethernet"
default n
config LPC43_EVNTMNTR
bool "Event Monitor"
default n
config LPC43_GPDMA
bool "GPDMA"
default n
config LPC43_I2C0
bool "I2C0"
default n
config LPC43_I2C1
bool "I2C1"
default n
config LPC43_I2S0
bool "I2S0"
default n
config LPC43_I2S1
bool "I2S1"
default n
config LPC43_LCD
bool "LCD"
default n
config LPC43_MCPWM
bool "Motor Control PWM (MCPWM)"
default n
config LPC43_QEI
bool "Quadrature Controller Interface (QEI)"
default n
config LPC43_RIT
bool "Repetitive Interrupt Timer (RIT)"
default n
config LPC43_RTC
bool "Real Time Clock (RTC)"
default n
config LPC43_SCT
bool "State Configurable Timer (SCT)"
default n
config LPC43_SDMMC
bool "SD/MMC"
default n
config LPC43_SPI
bool "SPI"
default n
config LPC43_SPIFI
bool "SPI Flash Interface (SPIFI)"
default n
config LPC43_SSP0
bool "SSP0"
default n
config LPC43_SSP1
bool "SSP1"
default n
config LPC43_TMR0
bool "ADC1"
default n
config LPC43_TMR1
bool "Timer 1"
default n
config LPC43_TMR2
bool "Timer 2"
default n
config LPC43_TMR3
bool "Timer 3"
default n
config LPC43_USART0
bool "USART0"
default n
config LPC43_UART1
bool "UART1"
default n
config LPC43_USART2
bool "USART2"
default n
config LPC43_USART3
bool "USART3"
default n
config LPC43_USB0
bool "USB0"
default n
config LPC43_USB1
bool "USB1"
default n
config LPC43_USB1_ULPI
bool "USB1 with ULPI"
default n
depends on LPC43_USB1
config LPC43_WWDT
bool "Windowing Watchdog Timer (WWDT)"
default n
endmenu
menu "USART0 Configuration"
depends on LPC43_USART0
config USART0_SERIAL_CONSOLE
bool "USART0 serial console"
default y
---help---
Selects the USART0 for the console and ttys0 (default is the USART0).
config USART0_RXBUFSIZE
int "USART0 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART0_TXBUFSIZE
int "USART0 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART0_BAUD
int "USART0 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART0_BITS
int "USART0 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART0_PARITY
int "USART0 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART0_2STOP
bool "USART0 two stop bits"
default n
---help---
Two stop bits
endmenu
menu "UART1 Configuration"
depends on LPC43_UART1
config UART1_SERIAL_CONSOLE
bool "UART1 serial console"
default y if !LPC43_USART0
---help---
Selects the UART1 for the console and ttys0 (default is the UART1).
config UART1_RXBUFSIZE
int "UART1 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config UART1_TXBUFSIZE
int "UART1 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config UART1_BAUD
int "UART1 BAUD"
default 11520
---help---
The configured BAUD of the UART
config UART1_BITS
int "UART1 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config UART1_PARITY
int "UART1 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config UART1_2STOP
bool "UART1 two stop bits"
default n
---help---
Two stop bits
endmenu
menu "USART2 Configuration"
depends on LPC43_USART2
config USART2_SERIAL_CONSOLE
bool "USART2 serial console"
default y if !LPC43_USART0 && !LPC43_UART1
---help---
Selects the USART2 for the console and ttys0 (default is the USART2).
config USART2_RXBUFSIZE
int "USART2 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART2_TXBUFSIZE
int "USART2 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART2_BAUD
int "USART2 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART2_BITS
int "USART2 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART2_PARITY
int "USART2 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART2_2STOP
bool "USART2 two stop bits"
default n
---help---
Two stop bits
endmenu
menu "USART3 Configuration"
depends on LPC43_USART3
config USART3_SERIAL_CONSOLE
bool "USART3 serial console"
default y if !LPC43_USART0 && !LPC43_UART1 && !LPC43_USART2
---help---
Selects the USART3 for the console and ttys0 (default is the USART3).
config USART3_RXBUFSIZE
int "USART3 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART3_TXBUFSIZE
int "USART3 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART3_BAUD
int "USART3 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART3_BITS
int "USART3 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART3_PARITY
int "USART3 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART3_2STOP
bool "USART3 two stop bits"
default n
---help---
Two stop bits
endmenu
config SERIAL_TERMIOS
bool "Serial driver TERMIOS supported"
depends on LPC43_USART0 || LPC43_UART1 || LPC43_USART2 || LPC43_USART3
default n
---help---
Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
If this is not defined, then the terminal settings (baud, parity, etc).
are not configurable at runtime; serial streams cannot be flushed, etc..