/****************************************************************************
* configs/lpc4330-xplorer/src/up_userleds.c
* arch/arm/src/board/up_userleds.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "xplorer_internal.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* LED definitions **********************************************************/
/* The LPC4330-Xplorer has 2 user-controllable LEDs labeled D2 an D3 in the
* schematic and on but referred to has LED1 and LED2 here, respectively.
*
* LED1 D2 GPIO1[12]
* LED2 D3 GPIO1[11]
*
* LEDs are pulled high to a low output illuminates the LED.
*/
/* Debug definitions ********************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LED
# define leddbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define LED_VERBOSE 1
# define ledvdbg lldbg
# else
# undef LED_VERBOSE
# define ledvdbg(x...)
# endif
#else
# undef LED_VERBOSE
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: led_dumppins
****************************************************************************/
#ifdef LED_VERBOSE
static void led_dumppins(FAR const char *msg)
{
lpc43_pin_dump(PINCONFIG_LED1, msg);
lpc43_gpio_dump(GPIO_LED2, msg);
}
#else
# define led_dumppins(m)
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lpc43_ledinit
****************************************************************************/
void lpc43_ledinit(void)
{
/* Configure all LED GPIO lines */
led_dumppins("lpc43_ledinit() Entry)");
/* Configure LED pins as GPIOs, then configure GPIOs as outputs */
lpc43_pin_config(PINCONFIG_LED1);
lpc43_gpio_config(GPIO_LED1);
lpc43_pin_config(PINCONFIG_LED2);
lpc43_gpio_config(GPIO_LED2);
led_dumppins("lpc43_ledinit() Exit");
}
/****************************************************************************
* Name: lpc43_setled
****************************************************************************/
void lpc43_setled(int led, bool ledon)
{
uint16_t gpiocfg = (led == BOARD_LED1 ? GPIO_LED1 : GPIO_LED2);
lpc43_gpio_write(gpiocfg, !ledon);
}
/****************************************************************************
* Name: lpc43_setleds
****************************************************************************/
void lpc43_setleds(uint8_t ledset)
{
lpc43_gpio_write(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
lpc43_gpio_write(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */
