|
|
/************************************************************************************
* configs/px4io/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
#endif
#include <stm32_rcc.h>
#include <stm32_sdio.h>
#include <stm32_internal.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* On-board crystal frequency is 24MHz (HSE) */
#define STM32_BOARD_XTAL 24000000ul
/* Use the HSE output as the system clock */
#define STM32_SYSCLK_SW RCC_CFGR_SW_HSE
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_HSE
#define STM32_SYSCLK_FREQUENCY STM32_BOARD_XTAL
/* AHB clock (HCLK) is SYSCLK (24MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB2 clock (PCLK2) is HCLK (24MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-4 */
/* APB2 timer 1 will receive PCLK2. */
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
/* APB1 clock (PCLK1) is HCLK (24MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY)
/* All timers run off PCLK */
#define STM32_APB1_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM2_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (STM32_PCLK1_FREQUENCY)
/*
* Some of the USART pins are not available; override the GPIO
* definitions with an invalid pin configuration.
*/
#define GPIO_USART2_CTS 0xffffffff
#define GPIO_USART2_RTS 0xffffffff
#define GPIO_USART2_CK 0xffffffff
#define GPIO_USART3_TX 0xffffffff
#define GPIO_USART3_CK 0xffffffff
#define GPIO_USART3_CTS 0xffffffff
#define GPIO_USART3_RTS 0xffffffff
/*
* High-resolution timer
*/
#ifdef CONFIG_HRT_TIMER
# define HRT_TIMER 1 /* use timer1 for the HRT */
# define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */
#endif
/*
* PPM
*
* PPM input is handled by the HRT timer.
*
* Pin is PA8, timer 1, channel 1
*/
#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM)
# define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */
# define GPIO_PPM_IN GPIO_TIM1_CH1IN
#endif
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void stm32_boardinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */
|