path: root/src/drivers/px4flow/px4flow.cpp

/****************************************************************************
 *
 *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file px4flow.cpp
 * @author Dominik Honegger
 *
 * Driver for the PX4FLOW module connected via I2C.
 */

#include <nuttx/config.h>

#include <drivers/device/i2c.h>

#include <sys/types.h>
#include <stdint.h>
#include <stdlib.h>
#include <stdbool.h>
#include <semaphore.h>
#include <string.h>
#include <fcntl.h>
#include <poll.h>
#include <errno.h>
#include <stdio.h>
#include <math.h>
#include <unistd.h>

#include <nuttx/arch.h>
#include <nuttx/wqueue.h>
#include <nuttx/clock.h>

#include <systemlib/perf_counter.h>
#include <systemlib/err.h>

#include <drivers/drv_hrt.h>
#include <drivers/drv_px4flow.h>
#include <drivers/device/ringbuffer.h>

#include <uORB/uORB.h>
#include <uORB/topics/subsystem_info.h>
#include <uORB/topics/optical_flow.h>

#include <board_config.h>

/* Configuration Constants */
#define PX4FLOW_BUS 			PX4_I2C_BUS_ESC//PX4_I2C_BUS_EXPANSION
#define I2C_FLOW_ADDRESS 		0x42 //* 7-bit address. 8-bit address is 0x84
//range 0x42 - 0x49

/* PX4FLOW Registers addresses */
//#define PX4FLOW_REG		0x00	/* Measure Register 0*/
#define PX4FLOW_REG 	0x16	/* Measure Register 22*/

#define PX4FLOW_CONVERSION_INTERVAL 20000 //in microseconds! 20000 = 50 Hz 100000 = 10Hz
/* oddly, ERROR is not defined for c++ */
#ifdef ERROR
# undef ERROR
#endif
static const int ERROR = -1;

#ifndef CONFIG_SCHED_WORKQUEUE
# error This requires CONFIG_SCHED_WORKQUEUE.
#endif

struct i2c_frame {
	uint16_t frame_count;
	int16_t pixel_flow_x_sum;
	int16_t pixel_flow_y_sum;
	int16_t flow_comp_m_x;
	int16_t flow_comp_m_y;
	int16_t qual;
	int16_t gyro_x_rate;
	int16_t gyro_y_rate;
	int16_t gyro_z_rate;
	uint8_t gyro_range;
	uint8_t sonar_timestamp;
	int16_t ground_distance;
};
struct i2c_frame f;

typedef struct i2c_integral_frame {
	uint16_t frame_count_since_last_readout;
	int16_t pixel_flow_x_integral;
	int16_t pixel_flow_y_integral;
	int16_t gyro_x_rate_integral;
	int16_t gyro_y_rate_integral;
	int16_t gyro_z_rate_integral;
	uint32_t integration_timespan;
	uint32_t time_since_last_sonar_update;
	uint16_t ground_distance;
	uint8_t qual;
}__attribute__((packed));
struct i2c_integral_frame f_integral;


class PX4FLOW: public device::I2C {
public:
	PX4FLOW(int bus = PX4FLOW_BUS, int address = I2C_FLOW_ADDRESS);
	virtual ~PX4FLOW();

	virtual int init();

	virtual ssize_t read(struct file *filp, char *buffer, size_t buflen);
	virtual int ioctl(struct file *filp, int cmd, unsigned long arg);

	/**
	 * Diagnostics - print some basic information about the driver.
	 */
	void print_info();

protected:
	virtual int probe();

private:

	work_s _work;
	RingBuffer *_reports;bool _sensor_ok;
	int _measure_ticks;bool _collect_phase;

	orb_advert_t _px4flow_topic;

	perf_counter_t _sample_perf;
	perf_counter_t _comms_errors;
	perf_counter_t _buffer_overflows;

	/**
	 * Test whether the device supported by the driver is present at a
	 * specific address.
	 *
	 * @param address	The I2C bus address to probe.
	 * @return		True if the device is present.
	 */
	int probe_address(uint8_t address);

	/**
	 * Initialise the automatic measurement state machine and start it.
	 *
	 * @note This function is called at open and error time.  It might make sense
	 *       to make it more aggressive about resetting the bus in case of errors.
	 */
	void start();

	/**
	 * Stop the automatic measurement state machine.
	 */
	void stop();

	/**
	 * Perform a poll cycle; collect from the previous measurement
	 * and start a new one.
	 */
	void cycle();
	int measure();
	int collect();
	/**
	 * Static trampoline from the workq context; because we don't have a
	 * generic workq wrapper yet.
	 *
	 * @param arg		Instance pointer for the driver that is polling.
	 */
	static void cycle_trampoline(void *arg);

};

/*
 * Driver 'main' command.
 */
extern "C" __EXPORT int px4flow_main(int argc, char *argv[]);

PX4FLOW::PX4FLOW(int bus, int address) :
		I2C("PX4FLOW", PX4FLOW_DEVICE_PATH, bus, address, 400000), //400khz
		_reports(nullptr), _sensor_ok(false), _measure_ticks(0), _collect_phase(
				false), _px4flow_topic(-1), _sample_perf(
				perf_alloc(PC_ELAPSED, "px4flow_read")), _comms_errors(
				perf_alloc(PC_COUNT, "px4flow_comms_errors")), _buffer_overflows(
				perf_alloc(PC_COUNT, "px4flow_buffer_overflows")) {
	// enable debug() calls
	_debug_enabled = true;

	// work_cancel in the dtor will explode if we don't do this...
	memset(&_work, 0, sizeof(_work));
}

PX4FLOW::~PX4FLOW() {
	/* make sure we are truly inactive */
	stop();

	/* free any existing reports */
	if (_reports != nullptr)
		delete _reports;
}

int PX4FLOW::init() {
	int ret = ERROR;

	/* do I2C init (and probe) first */
	if (I2C::init() != OK)
		goto out;

	/* allocate basic report buffers */
	_reports = new RingBuffer(2, sizeof(optical_flow_s));

	if (_reports == nullptr)
		goto out;

	ret = OK;
	/* sensor is ok, but we don't really know if it is within range */
	_sensor_ok = true;
	out: return ret;
}

int PX4FLOW::probe() {
	return measure();
}

int PX4FLOW::ioctl(struct file *filp, int cmd, unsigned long arg) {
	switch (cmd) {

	case SENSORIOCSPOLLRATE: {
		switch (arg) {

		/* switching to manual polling */
		case SENSOR_POLLRATE_MANUAL:
			stop();
			_measure_ticks = 0;
			return OK;

			/* external signalling (DRDY) not supported */
		case SENSOR_POLLRATE_EXTERNAL:

			/* zero would be bad */
		case 0:
			return -EINVAL;

			/* set default/max polling rate */
		case SENSOR_POLLRATE_MAX:
		case SENSOR_POLLRATE_DEFAULT: {
			/* do we need to start internal polling? */
			bool want_start = (_measure_ticks == 0);

			/* set interval for next measurement to minimum legal value */
			_measure_ticks = USEC2TICK(PX4FLOW_CONVERSION_INTERVAL);

			/* if we need to start the poll state machine, do it */
			if (want_start)
				start();

			return OK;
		}

			/* adjust to a legal polling interval in Hz */
		default: {
			/* do we need to start internal polling? */
			bool want_start = (_measure_ticks == 0);

			/* convert hz to tick interval via microseconds */
			unsigned ticks = USEC2TICK(1000000 / arg);

			/* check against maximum rate */
			if (ticks < USEC2TICK(PX4FLOW_CONVERSION_INTERVAL))
				return -EINVAL;

			/* update interval for next measurement */
			_measure_ticks = ticks;

			/* if we need to start the poll state machine, do it */
			if (want_start)
				start();

			return OK;
		}
		}
	}

	case SENSORIOCGPOLLRATE:
		if (_measure_ticks == 0)
			return SENSOR_POLLRATE_MANUAL;

		return (1000 / _measure_ticks);

	case SENSORIOCSQUEUEDEPTH: {
		/* lower bound is mandatory, upper bound is a sanity check */
		if ((arg < 1) || (arg > 100))
			return -EINVAL;

		irqstate_t flags = irqsave();
		if (!_reports->resize(arg)) {
			irqrestore(flags);
			return -ENOMEM;
		}
		irqrestore(flags);

		return OK;
	}

	case SENSORIOCGQUEUEDEPTH:
		return _reports->size();

	case SENSORIOCRESET:
		/* XXX implement this */
		return -EINVAL;

	default:
		/* give it to the superclass */
		return I2C::ioctl(filp, cmd, arg);
	}
}

ssize_t PX4FLOW::read(struct file *filp, char *buffer, size_t buflen) {
	unsigned count = buflen / sizeof(struct optical_flow_s);
	struct optical_flow_s *rbuf =
			reinterpret_cast<struct optical_flow_s *>(buffer);
	int ret = 0;

	/* buffer must be large enough */
	if (count < 1)
		return -ENOSPC;

	/* if automatic measurement is enabled */
	if (_measure_ticks > 0) {

		/*
		 * While there is space in the caller's buffer, and reports, copy them.
		 * Note that we may be pre-empted by the workq thread while we are doing this;
		 * we are careful to avoid racing with them.
		 */
		while (count--) {
			if (_reports->get(rbuf)) {
				ret += sizeof(*rbuf);
				rbuf++;
			}
		}

		/* if there was no data, warn the caller */
		return ret ? ret : -EAGAIN;
	}

	/* manual measurement - run one conversion */
	do {
		_reports->flush();

		/* trigger a measurement */
		if (OK != measure()) {
			ret = -EIO;
			break;
		}

//		/* wait for it to complete */
//		usleep(PX4FLOW_CONVERSION_INTERVAL);

		/* run the collection phase */
		if (OK != collect()) {
			ret = -EIO;
			break;
		}

		/* wait for it to complete */
		usleep(PX4FLOW_CONVERSION_INTERVAL);

		/* state machine will have generated a report, copy it out */
		if (_reports->get(rbuf)) {
			ret = sizeof(*rbuf);
		}

	} while (0);

	return ret;
}

int PX4FLOW::measure() {
	int ret;

	/*
	 * Send the command to begin a measurement.
	 */
	uint8_t cmd = PX4FLOW_REG;
	ret = transfer(&cmd, 1, nullptr, 0);

	if (OK != ret) {
		perf_count(_comms_errors);
		log("i2c::transfer returned %d", ret);
		printf("i2c::transfer flow returned %d");
		return ret;
	}
	ret = OK;

	return ret;
}

int PX4FLOW::collect() {
	int ret = -EIO;

	/* read from the sensor */
	uint8_t val[46] = { 0 };


	perf_begin(_sample_perf);

	if(PX4FLOW_REG==0x00){
		ret = transfer(nullptr, 0, &val[0], 45); //read 45 bytes (22+23 : frame1 + frame2)
	}
	if(PX4FLOW_REG==0x16){
		ret = transfer(nullptr, 0, &val[0], 23); //read 23 bytes (only frame2)
	}

	if (ret < 0) {
		log("error reading from sensor: %d", ret);
		perf_count(_comms_errors);
		perf_end(_sample_perf);
		return ret;
	}

	if (PX4FLOW_REG == 0) {
		f.frame_count = val[1] << 8 | val[0];
		f.pixel_flow_x_sum = val[3] << 8 | val[2];
		f.pixel_flow_y_sum = val[5] << 8 | val[4];
		f.flow_comp_m_x = val[7] << 8 | val[6];
		f.flow_comp_m_y = val[9] << 8 | val[8];
		f.qual = val[11] << 8 | val[10];
		f.gyro_x_rate = val[13] << 8 | val[12];
		f.gyro_y_rate = val[15] << 8 | val[14];
		f.gyro_z_rate = val[17] << 8 | val[16];
		f.gyro_range = val[18];
		f.sonar_timestamp = val[19];
		f.ground_distance = val[21] << 8 | val[20];

		f_integral.frame_count_since_last_readout = val[23] << 8 | val[22];
		f_integral.pixel_flow_x_integral = val[25] << 8 | val[24];
		f_integral.pixel_flow_y_integral = val[27] << 8 | val[26];
		f_integral.gyro_x_rate_integral = val[29] << 8 | val[28];
		f_integral.gyro_y_rate_integral = val[31] << 8 | val[30];
		f_integral.gyro_z_rate_integral = val[33] << 8 | val[32];
		f_integral.integration_timespan = val[37] << 24 | val[36] << 16
				| val[35] << 8 | val[34];
		f_integral.time_since_last_sonar_update = val[41] << 24 | val[40] << 16
				| val[39] << 8 | val[38];
		f_integral.ground_distance = val[43] << 8 | val[42];
		f_integral.qual = val[44];
	}
	if(PX4FLOW_REG==0x16){
		f_integral.frame_count_since_last_readout = val[1] << 8 | val[0];
		f_integral.pixel_flow_x_integral =val[3] << 8 | val[2];
		f_integral.pixel_flow_y_integral =val[5] << 8 | val[4];
		f_integral.gyro_x_rate_integral =val[7] << 8 | val[6];
		f_integral.gyro_y_rate_integral =val[9] << 8 | val[8];
		f_integral.gyro_z_rate_integral =val[11] << 8 | val[10];
		f_integral.integration_timespan = val[15] <<24 |val[14] << 16 |val[13] << 8 |val[12];
		f_integral.time_since_last_sonar_update = val[19] <<24 |val[18] << 16 |val[17] << 8 |val[16];
		f_integral.ground_distance =val[21] <<8 |val[20];
		f_integral.qual =val[22];
	}


	struct optical_flow_s report;
	report.timestamp = hrt_absolute_time();
	report.pixel_flow_x_integral = float(f_integral.pixel_flow_x_integral) / 10000.0f;//convert to radians
	report.pixel_flow_y_integral = float(f_integral.pixel_flow_y_integral) / 10000.0f;//convert to radians
	report.frame_count_since_last_readout = f_integral.frame_count_since_last_readout;
	report.ground_distance_m = float(f_integral.ground_distance) / 1000.0f;//convert to meters
	report.quality = f_integral.qual;//0:bad ; 255 max quality
	report.gyro_x_rate_integral= float(f_integral.gyro_x_rate_integral)/10000.0f;//convert to radians
	report.gyro_y_rate_integral= float(f_integral.gyro_y_rate_integral)/10000.0f;//convert to radians
	report.gyro_z_rate_integral= float(f_integral.gyro_z_rate_integral)/10000.0f;//convert to radians
	report.integration_timespan= f_integral.integration_timespan;//microseconds
	report.time_since_last_sonar_update = f_integral.time_since_last_sonar_update;//microseconds
	report.sensor_id = 0;

	if (_px4flow_topic < 0) {
		_px4flow_topic = orb_advertise(ORB_ID(optical_flow), &report);
	} else {
		/* publish it */
		orb_publish(ORB_ID(optical_flow), _px4flow_topic, &report);
	}

	/* post a report to the ring */
	if (_reports->force(&report)) {
		perf_count(_buffer_overflows);
	}

	/* notify anyone waiting for data */
	poll_notify(POLLIN);

	ret = OK;

	perf_end(_sample_perf);
	return ret;
}

void PX4FLOW::start() {
	/* reset the report ring and state machine */
	_collect_phase = false;
	_reports->flush();

	/* schedule a cycle to start things */
	work_queue(HPWORK, &_work, (worker_t) & PX4FLOW::cycle_trampoline, this, 1);

	/* notify about state change */
	struct subsystem_info_s info = { true, true, true,
			SUBSYSTEM_TYPE_OPTICALFLOW };
	static orb_advert_t pub = -1;

	if (pub > 0) {
		orb_publish(ORB_ID(subsystem_info), pub, &info);
	} else {
		pub = orb_advertise(ORB_ID(subsystem_info), &info);
	}
}

void PX4FLOW::stop() {
	work_cancel(HPWORK, &_work);
}

void PX4FLOW::cycle_trampoline(void *arg) {
	PX4FLOW *dev = (PX4FLOW *) arg;

	dev->cycle();
}

void PX4FLOW::cycle() {
//	/* collection phase? */

//	static uint64_t deltatime = hrt_absolute_time();

	if (OK != measure())
		log("measure error");

	//usleep(PX4FLOW_CONVERSION_INTERVAL/40);

	/* perform collection */
	if (OK != collect()) {
		log("collection error");
		/* restart the measurement state machine */
		start();
		return;
	}


//	deltatime = hrt_absolute_time()-deltatime;
//
//
//	if(deltatime>PX4FLOW_CONVERSION_INTERVAL){
//		deltatime=PX4FLOW_CONVERSION_INTERVAL;
//	}


//	work_queue(HPWORK, &_work, (worker_t) & PX4FLOW::cycle_trampoline, this,
//			_measure_ticks-USEC2TICK(deltatime));

	work_queue(HPWORK, &_work, (worker_t) & PX4FLOW::cycle_trampoline, this,
			_measure_ticks);

//	deltatime = hrt_absolute_time();

}

void PX4FLOW::print_info() {
	perf_print_counter(_sample_perf);
	perf_print_counter(_comms_errors);
	perf_print_counter(_buffer_overflows);
	printf("poll interval:  %u ticks\n", _measure_ticks);
	_reports->print_info("report queue");
}

/**
 * Local functions in support of the shell command.
 */
namespace px4flow {

/* oddly, ERROR is not defined for c++ */
#ifdef ERROR
# undef ERROR
#endif
const int ERROR = -1;

PX4FLOW *g_dev;

void start();
void stop();
void test();
void reset();
void info();

/**
 * Start the driver.
 */
void start() {
	int fd;

	if (g_dev != nullptr)
		errx(1, "already started");

	/* create the driver */
	g_dev = new PX4FLOW(PX4FLOW_BUS);

	if (g_dev == nullptr)
		goto fail;

	if (OK != g_dev->init())
		goto fail;

	/* set the poll rate to default, starts automatic data collection */
	fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY);

	if (fd < 0)
		goto fail;

	if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MAX) < 0)
		goto fail;

	exit(0);

	fail:

	if (g_dev != nullptr) {
		delete g_dev;
		g_dev = nullptr;
	}

	errx(1, "driver start failed");
}

/**
 * Stop the driver
 */
void stop() {
	if (g_dev != nullptr) {
		delete g_dev;
		g_dev = nullptr;
	} else {
		errx(1, "driver not running");
	}
	exit(0);
}

/**
 * Perform some basic functional tests on the driver;
 * make sure we can collect data from the sensor in polled
 * and automatic modes.
 */
void test() {
	struct optical_flow_s report;
	ssize_t sz;
	int ret;

	int fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY);

	if (fd < 0)
		err(1,
				"%s open failed (try 'px4flow start' if the driver is not running",
				PX4FLOW_DEVICE_PATH);

	/* do a simple demand read */
	sz = read(fd, &report, sizeof(report));

	if (sz != sizeof(report))
		//	err(1, "immediate read failed");

		warnx("single read");
	warnx("flowx: %0.2f m/s", (double) f.pixel_flow_x_sum);
	warnx("flowy: %0.2f m/s", (double) f.pixel_flow_y_sum);
	warnx("time:        %lld", report.timestamp);

	/* start the sensor polling at 10Hz */
	if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 10))	// 2))
		errx(1, "failed to set 10Hz poll rate");

	/* read the sensor 5x and report each value */
	for (unsigned i = 0; i < 10; i++) {
		struct pollfd fds;

		/* wait for data to be ready */
		fds.fd = fd;
		fds.events = POLLIN;
		ret = poll(&fds, 1, 2000);

		if (ret != 1)
			errx(1, "timed out waiting for sensor data");

		/* now go get it */
		sz = read(fd, &report, sizeof(report));

		if (sz != sizeof(report))
			err(1, "periodic read failed");

		warnx("periodic read %u", i);

		warnx("framecount_total: %u", f.frame_count);
		warnx("framecount_integral: %u",
				f_integral.frame_count_since_last_readout);
		warnx("pixel_flow_x_integral: %i", f_integral.pixel_flow_x_integral);
		warnx("pixel_flow_y_integral: %i", f_integral.pixel_flow_y_integral);
		warnx("gyro_x_rate_integral: %i", f_integral.gyro_x_rate_integral);
		warnx("gyro_y_rate_integral: %i", f_integral.gyro_y_rate_integral);
		warnx("gyro_z_rate_integral: %i", f_integral.gyro_z_rate_integral);
		warnx("integration_timespan [us]: %u", f_integral.integration_timespan);
		warnx("ground_distance: %0.2f m",
				(double) f_integral.ground_distance / 1000);
		warnx("time since last sonar update [us]: %i",
				f_integral.time_since_last_sonar_update);
		warnx("quality integration average : %i", f_integral.qual);
		warnx("quality : %i", f.qual);


	}

	errx(0, "PASS");
}

/**
 * Reset the driver.
 */
void reset() {
	int fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY);

	if (fd < 0)
		err(1, "failed ");

	if (ioctl(fd, SENSORIOCRESET, 0) < 0)
		err(1, "driver reset failed");

	if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0)
		err(1, "driver poll restart failed");

	exit(0);
}

/**
 * Print a little info about the driver.
 */
void info() {
	if (g_dev == nullptr)
		errx(1, "driver not running");

	printf("state @ %p\n", g_dev);
	g_dev->print_info();

	exit(0);
}

} // namespace

int px4flow_main(int argc, char *argv[]) {
	/*
	 * Start/load the driver.
	 */
	if (!strcmp(argv[1], "start"))
		px4flow::start();

	/*
	 * Stop the driver
	 */
	if (!strcmp(argv[1], "stop"))
		px4flow::stop();

	/*
	 * Test the driver/device.
	 */
	if (!strcmp(argv[1], "test"))
		px4flow::test();

	/*
	 * Reset the driver.
	 */
	if (!strcmp(argv[1], "reset"))
		px4flow::reset();

	/*
	 * Print driver information.
	 */
	if (!strcmp(argv[1], "info") || !strcmp(argv[1], "status"))
		px4flow::info();

	errx(1, "unrecognized command, try 'start', 'test', 'reset' or 'info'");
}