/****************************************************************************
*
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
* Author: Petri Tanskanen <petri.tanskanen@inf.ethz.ch>
* Lorenz Meier <lm@inf.ethz.ch>
* Thomas Gubler <thomasgubler@student.ethz.ch>
* Julian Oes <joes@student.ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file commander.c
* Main system state machine implementation.
*
* @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch>
* @author Lorenz Meier <lm@inf.ethz.ch>
* @author Thomas Gubler <thomasgubler@student.ethz.ch>
* @author Julian Oes <joes@student.ethz.ch>
*
*/
#include "commander.h"
#include <nuttx/config.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <debug.h>
#include <sys/prctl.h>
#include <string.h>
#include <math.h>
#include <poll.h>
#include <uORB/uORB.h>
#include <uORB/topics/sensor_combined.h>
#include <uORB/topics/battery_status.h>
#include <uORB/topics/manual_control_setpoint.h>
#include <uORB/topics/offboard_control_setpoint.h>
#include <uORB/topics/home_position.h>
#include <uORB/topics/vehicle_global_position.h>
#include <uORB/topics/vehicle_local_position.h>
#include <uORB/topics/vehicle_gps_position.h>
#include <uORB/topics/vehicle_command.h>
#include <uORB/topics/vehicle_control_mode.h>
#include <uORB/topics/subsystem_info.h>
#include <uORB/topics/actuator_controls.h>
#include <uORB/topics/actuator_armed.h>
#include <uORB/topics/parameter_update.h>
#include <uORB/topics/differential_pressure.h>
#include <uORB/topics/safety.h>
#include <mavlink/mavlink_log.h>
#include <drivers/drv_led.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_tone_alarm.h>
#include <mavlink/mavlink_log.h>
#include <systemlib/param/param.h>
#include <systemlib/systemlib.h>
#include <systemlib/err.h>
#include <systemlib/cpuload.h>
#include "commander_helper.h"
#include "state_machine_helper.h"
#include "calibration_routines.h"
#include "accelerometer_calibration.h"
#include "gyro_calibration.h"
#include "mag_calibration.h"
#include "baro_calibration.h"
#include "rc_calibration.h"
#include "airspeed_calibration.h"
PARAM_DEFINE_INT32(SYS_FAILSAVE_LL, 0); /**< Go into low-level failsafe after 0 ms */
//PARAM_DEFINE_INT32(SYS_FAILSAVE_HL, 0); /**< Go into high-level failsafe after 0 ms */
PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f);
PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f);
PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f);
extern struct system_load_s system_load;
#define LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 1000.0f
#define CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 100.0f
/* Decouple update interval and hysteris counters, all depends on intervals */
#define COMMANDER_MONITORING_INTERVAL 50000
#define COMMANDER_MONITORING_LOOPSPERMSEC (1/(COMMANDER_MONITORING_INTERVAL/1000.0f))
#define LOW_VOLTAGE_BATTERY_COUNTER_LIMIT (LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT (CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define STICK_ON_OFF_LIMIT 0.75f
#define STICK_THRUST_RANGE 1.0f
#define STICK_ON_OFF_HYSTERESIS_TIME_MS 1000
#define STICK_ON_OFF_COUNTER_LIMIT (STICK_ON_OFF_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define GPS_FIX_TYPE_2D 2
#define GPS_FIX_TYPE_3D 3
#define GPS_QUALITY_GOOD_HYSTERIS_TIME_MS 5000
#define GPS_QUALITY_GOOD_COUNTER_LIMIT (GPS_QUALITY_GOOD_HYSTERIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC)
#define LOCAL_POSITION_TIMEOUT 1000000 /**< consider the local position estimate invalid after 1s */
/* Mavlink file descriptors */
static int mavlink_fd;
/* flags */
static bool commander_initialized = false;
static bool thread_should_exit = false; /**< daemon exit flag */
static bool thread_running = false; /**< daemon status flag */
static int daemon_task; /**< Handle of daemon task / thread */
/* timout until lowlevel failsafe */
static unsigned int failsafe_lowlevel_timeout_ms;
/* tasks waiting for low prio thread */
enum {
LOW_PRIO_TASK_NONE = 0,
LOW_PRIO_TASK_PARAM_SAVE,
LOW_PRIO_TASK_PARAM_LOAD,
LOW_PRIO_TASK_GYRO_CALIBRATION,
LOW_PRIO_TASK_MAG_CALIBRATION,
LOW_PRIO_TASK_ALTITUDE_CALIBRATION,
LOW_PRIO_TASK_RC_CALIBRATION,
LOW_PRIO_TASK_ACCEL_CALIBRATION,
LOW_PRIO_TASK_AIRSPEED_CALIBRATION
} low_prio_task;
/**
* Loop that runs at a lower rate and priority for calibration and parameter tasks.
*/
void *commander_low_prio_loop(void *arg);
__EXPORT int commander_main(int argc, char *argv[]);
/**
* Mainloop of commander.
*/
int commander_thread_main(int argc, char *argv[]);
/**
* React to commands that are sent e.g. from the mavlink module.
*/
void handle_command(int status_pub, struct vehicle_status_s *current_status, struct vehicle_command_s *cmd, int armed_pub, struct actuator_armed_s *armed);
/**
* Print the correct usage.
*/
void usage(const char *reason);
void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_status, struct vehicle_command_s *cmd, int armed_pub, struct actuator_armed_s *armed)
{
/* result of the command */
uint8_t result = VEHICLE_CMD_RESULT_UNSUPPORTED;
/* request to set different system mode */
switch (cmd->command) {
case VEHICLE_CMD_DO_SET_MODE:
/* request to activate HIL */
if ((int)cmd->param1 & VEHICLE_MODE_FLAG_HIL_ENABLED) {
if (OK == hil_state_transition(status_pub, current_vehicle_status, mavlink_fd, HIL_STATE_ON)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
}
if ((int)cmd->param1 & VEHICLE_MODE_FLAG_SAFETY_ARMED) {
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_ARMED, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
} else {
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_STANDBY, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
}
break;
case VEHICLE_CMD_COMPONENT_ARM_DISARM:
/* request to arm */
if ((int)cmd->param1 == 1) {
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_ARMED, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
/* request to disarm */
} else if ((int)cmd->param1 == 0) {
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_STANDBY, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
}
break;
case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: {
/* request for an autopilot reboot */
if ((int)cmd->param1 == 1) {
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_REBOOT, armed_pub, armed, mavlink_fd)) {
/* reboot is executed later, after positive tune is sent */
result = VEHICLE_CMD_RESULT_ACCEPTED;
tune_positive();
mavlink_log_critical(mavlink_fd, "REBOOTING SYSTEM");
usleep(500000);
up_systemreset();
/* SPECIAL CASE: NEVER RETURNS FROM THIS FUNCTION CALL */
} else {
/* system may return here */
result = VEHICLE_CMD_RESULT_DENIED;
tune_negative();
}
}
}
break;
// /* request to land */
// case VEHICLE_CMD_NAV_LAND:
// {
// //TODO: add check if landing possible
// //TODO: add landing maneuver
//
// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_ARMED)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// } }
// break;
//
// /* request to takeoff */
// case VEHICLE_CMD_NAV_TAKEOFF:
// {
// //TODO: add check if takeoff possible
// //TODO: add takeoff maneuver
//
// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_AUTO)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// }
// }
// break;
//
/* preflight calibration */
case VEHICLE_CMD_PREFLIGHT_CALIBRATION:
/* gyro calibration */
if ((int)(cmd->param1) == 1) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
/* try to go to INIT/PREFLIGHT arming state */
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
/* now set the task for the low prio thread */
low_prio_task = LOW_PRIO_TASK_GYRO_CALIBRATION;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
}
/* magnetometer calibration */
if ((int)(cmd->param2) == 1) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
/* try to go to INIT/PREFLIGHT arming state */
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
/* now set the task for the low prio thread */
low_prio_task = LOW_PRIO_TASK_MAG_CALIBRATION;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
}
// /* zero-altitude pressure calibration */
// if ((int)(cmd->param3) == 1) {
// /* check if no other task is scheduled */
// if(low_prio_task == LOW_PRIO_TASK_NONE) {
// /* try to go to INIT/PREFLIGHT arming state */
// if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// /* now set the task for the low prio thread */
// low_prio_task = LOW_PRIO_TASK_ALTITUDE_CALIBRATION;
// } else {
// result = VEHICLE_CMD_RESULT_DENIED;
// }
// } else {
// result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
// }
// }
// /* trim calibration */
// if ((int)(cmd->param4) == 1) {
// /* check if no other task is scheduled */
// if(low_prio_task == LOW_PRIO_TASK_NONE) {
// /* try to go to INIT/PREFLIGHT arming state */
// if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
// result = VEHICLE_CMD_RESULT_ACCEPTED;
// /* now set the task for the low prio thread */
// low_prio_task = LOW_PRIO_TASK_RC_CALIBRATION;
// } else {
// result = VEHICLE_CMD_RESULT_DENIED;
// }
// } else {
// result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
// }
// }
/* accel calibration */
if ((int)(cmd->param5) == 1) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
/* try to go to INIT/PREFLIGHT arming state */
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
/* now set the task for the low prio thread */
low_prio_task = LOW_PRIO_TASK_ACCEL_CALIBRATION;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
}
/* airspeed calibration */
if ((int)(cmd->param6) == 1) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
/* try to go to INIT/PREFLIGHT arming state */
if (OK == arming_state_transition(status_pub, current_vehicle_status, ARMING_STATE_INIT, armed_pub, armed, mavlink_fd)) {
result = VEHICLE_CMD_RESULT_ACCEPTED;
/* now set the task for the low prio thread */
low_prio_task = LOW_PRIO_TASK_AIRSPEED_CALIBRATION;
} else {
result = VEHICLE_CMD_RESULT_DENIED;
}
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
}
break;
case VEHICLE_CMD_PREFLIGHT_STORAGE:
if (((int)(cmd->param1)) == 0) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
low_prio_task = LOW_PRIO_TASK_PARAM_LOAD;
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
} else if (((int)(cmd->param1)) == 1) {
/* check if no other task is scheduled */
if(low_prio_task == LOW_PRIO_TASK_NONE) {
low_prio_task = LOW_PRIO_TASK_PARAM_SAVE;
result = VEHICLE_CMD_RESULT_ACCEPTED;
} else {
result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
}
}
break;
default:
mavlink_log_critical(mavlink_fd, "[cmd] refusing unsupported command");
result = VEHICLE_CMD_RESULT_UNSUPPORTED;
break;
}
/* supported command handling stop */
if (result == VEHICLE_CMD_RESULT_FAILED ||
result == VEHICLE_CMD_RESULT_DENIED ||
result == VEHICLE_CMD_RESULT_UNSUPPORTED ||
result == VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED) {
tune_negative();
} else if (result == VEHICLE_CMD_RESULT_ACCEPTED) {
tune_positive();
}
/* send any requested ACKs */
if (cmd->confirmation > 0) {
/* send acknowledge command */
// XXX TODO
}
}
/*
* Provides a coarse estimate of remaining battery power.
*
* The estimate is very basic and based on decharging voltage curves.
*
* @return the estimated remaining capacity in 0..1
*/
float battery_remaining_estimate_voltage(float voltage);
PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.2f);
PARAM_DEFINE_FLOAT(BAT_V_FULL, 4.05f);
PARAM_DEFINE_FLOAT(BAT_N_CELLS, 3);
float battery_remaining_estimate_voltage(float voltage)
{
float ret = 0;
static param_t bat_volt_empty;
static param_t bat_volt_full;
static param_t bat_n_cells;
static bool initialized = false;
static unsigned int counter = 0;
static float ncells = 3;
// XXX change cells to int (and param to INT32)
if (!initialized) {
bat_volt_empty = param_find("BAT_V_EMPTY");
bat_volt_full = param_find("BAT_V_FULL");
bat_n_cells = param_find("BAT_N_CELLS");
initialized = true;
}
static float chemistry_voltage_empty = 3.2f;
static float chemistry_voltage_full = 4.05f;
if (counter % 100 == 0) {
param_get(bat_volt_empty, &chemistry_voltage_empty);
param_get(bat_volt_full, &chemistry_voltage_full);
param_get(bat_n_cells, &ncells);
}
counter++;
ret = (voltage - ncells * chemistry_voltage_empty) / (ncells * (chemistry_voltage_full - chemistry_voltage_empty));
/* limit to sane values */
ret = (ret < 0) ? 0 : ret;
ret = (ret > 1) ? 1 : ret;
return ret;
}
void usage(const char *reason)
{
if (reason)
fprintf(stderr, "%s\n", reason);
fprintf(stderr, "usage: daemon {start|stop|status} [-p <additional params>]\n\n");
exit(1);
}
/**
* The daemon app only briefly exists to start
* the background job. The stack size assigned in the
* Makefile does only apply to this management task.
*
* The actual stack size should be set in the call
* to task_create().
*/
int commander_main(int argc, char *argv[])
{
if (argc < 1)
usage("missing command");
if (!strcmp(argv[1], "start")) {
if (thread_running) {
warnx("commander already running\n");
/* this is not an error */
exit(0);
}
thread_should_exit = false;
daemon_task = task_spawn_cmd("commander",
SCHED_DEFAULT,
SCHED_PRIORITY_MAX - 40,
3000,
commander_thread_main,
(argv) ? (const char **)&argv[2] : (const char **)NULL);
exit(0);
}
if (!strcmp(argv[1], "stop")) {
thread_should_exit = true;
exit(0);
}
if (!strcmp(argv[1], "status")) {
if (thread_running) {
warnx("\tcommander is running\n");
} else {
warnx("\tcommander not started\n");
}
exit(0);
}
usage("unrecognized command");
exit(1);
}
int commander_thread_main(int argc, char *argv[])
{
/* not yet initialized */
commander_initialized = false;
bool home_position_set = false;
bool battery_tune_played = false;
bool arm_tune_played = false;
/* set parameters */
failsafe_lowlevel_timeout_ms = 0;
param_get(param_find("SYS_FAILSAVE_LL"), &failsafe_lowlevel_timeout_ms);
param_t _param_sys_type = param_find("MAV_TYPE");
param_t _param_system_id = param_find("MAV_SYS_ID");
param_t _param_component_id = param_find("MAV_COMP_ID");
/* welcome user */
warnx("[commander] starting");
/* pthread for slow low prio thread */
pthread_t commander_low_prio_thread;
/* initialize */
if (led_init() != 0) {
warnx("ERROR: Failed to initialize leds");
}
if (buzzer_init() != OK) {
warnx("ERROR: Failed to initialize buzzer");
}
mavlink_fd = open(MAVLINK_LOG_DEVICE, 0);
if (mavlink_fd < 0) {
warnx("ERROR: Failed to open MAVLink log stream, start mavlink app first.");
}
/* Main state machine */
struct vehicle_status_s current_status;
orb_advert_t status_pub;
/* make sure we are in preflight state */
memset(¤t_status, 0, sizeof(current_status));
/* armed topic */
struct actuator_armed_s armed;
orb_advert_t armed_pub;
/* Initialize armed with all false */
memset(&armed, 0, sizeof(armed));
/* flags for control apps */
struct vehicle_control_mode_s control_mode;
orb_advert_t control_mode_pub;
/* Initialize all flags to false */
memset(&control_mode, 0, sizeof(control_mode));
current_status.navigation_state = NAVIGATION_STATE_INIT;
current_status.arming_state = ARMING_STATE_INIT;
current_status.hil_state = HIL_STATE_OFF;
/* neither manual nor offboard control commands have been received */
current_status.offboard_control_signal_found_once = false;
current_status.rc_signal_found_once = false;
/* mark all signals lost as long as they haven't been found */
current_status.rc_signal_lost = true;
current_status.offboard_control_signal_lost = true;
/* allow manual override initially */
current_status.flag_external_manual_override_ok = true;
/* flag position info as bad, do not allow auto mode */
// current_status.flag_vector_flight_mode_ok = false;
/* set battery warning flag */
current_status.battery_warning = VEHICLE_BATTERY_WARNING_NONE;
/* set safety device detection flag */
/* XXX do we need this? */
//current_status.flag_safety_present = false;
// XXX for now just set sensors as initialized
current_status.condition_system_sensors_initialized = true;
// XXX just disable offboard control for now
control_mode.flag_control_offboard_enabled = false;
/* advertise to ORB */
status_pub = orb_advertise(ORB_ID(vehicle_status), ¤t_status);
/* publish current state machine */
/* publish the new state */
current_status.counter++;
current_status.timestamp = hrt_absolute_time();
orb_publish(ORB_ID(vehicle_status), status_pub, ¤t_status);
armed_pub = orb_advertise(ORB_ID(actuator_armed), &armed);
control_mode_pub = orb_advertise(ORB_ID(vehicle_control_mode), &control_mode);
/* home position */
orb_advert_t home_pub = -1;
struct home_position_s home;
memset(&home, 0, sizeof(home));
if (status_pub < 0) {
warnx("ERROR: orb_advertise for topic vehicle_status failed (uorb app running?).\n");
warnx("exiting.");
exit(ERROR);
}
// XXX needed?
mavlink_log_info(mavlink_fd, "system is running");
pthread_attr_t commander_low_prio_attr;
pthread_attr_init(&commander_low_prio_attr);
pthread_attr_setstacksize(&commander_low_prio_attr, 2048);
struct sched_param param;
/* low priority */
param.sched_priority = SCHED_PRIORITY_DEFAULT - 50;
(void)pthread_attr_setschedparam(&commander_low_prio_attr, ¶m);
pthread_create(&commander_low_prio_thread, &commander_low_prio_attr, commander_low_prio_loop, NULL);
/* Start monitoring loop */
uint16_t counter = 0;
/* Initialize to 0.0V */
float battery_voltage = 0.0f;
bool battery_voltage_valid = false;
bool low_battery_voltage_actions_done = false;
bool critical_battery_voltage_actions_done = false;
uint8_t low_voltage_counter = 0;
uint16_t critical_voltage_counter = 0;
float bat_remain = 1.0f;
uint16_t stick_off_counter = 0;
uint16_t stick_on_counter = 0;
/* XXX what exactly is this for? */
uint64_t last_print_time = 0;
/* Subscribe to safety topic */
int safety_sub = orb_subscribe(ORB_ID(safety));
struct safety_s safety;
memset(&safety, 0, sizeof(safety));
/* Subscribe to manual control data */
int sp_man_sub = orb_subscribe(ORB_ID(manual_control_setpoint));
struct manual_control_setpoint_s sp_man;
memset(&sp_man, 0, sizeof(sp_man));
/* Subscribe to offboard control data */
int sp_offboard_sub = orb_subscribe(ORB_ID(offboard_control_setpoint));
struct offboard_control_setpoint_s sp_offboard;
memset(&sp_offboard, 0, sizeof(sp_offboard));
/* Subscribe to global position */
int global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position));
struct vehicle_global_position_s global_position;
memset(&global_position, 0, sizeof(global_position));
uint64_t last_global_position_time = 0;
/* Subscribe to local position data */
int local_position_sub = orb_subscribe(ORB_ID(vehicle_local_position));
struct vehicle_local_position_s local_position;
memset(&local_position, 0, sizeof(local_position));
uint64_t last_local_position_time = 0;
/*
* The home position is set based on GPS only, to prevent a dependency between
* position estimator and commander. RAW GPS is more than good enough for a
* non-flying vehicle.
*/
/* Subscribe to GPS topic */
int gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position));
struct vehicle_gps_position_s gps_position;
memset(&gps_position, 0, sizeof(gps_position));
/* Subscribe to sensor topic */
int sensor_sub = orb_subscribe(ORB_ID(sensor_combined));
struct sensor_combined_s sensors;
memset(&sensors, 0, sizeof(sensors));
int diff_pres_sub = orb_subscribe(ORB_ID(differential_pressure));
struct differential_pressure_s diff_pres;
memset(&diff_pres, 0, sizeof(diff_pres));
uint64_t last_diff_pres_time = 0;
/* Subscribe to command topic */
int cmd_sub = orb_subscribe(ORB_ID(vehicle_command));
struct vehicle_command_s cmd;
memset(&cmd, 0, sizeof(cmd));
/* Subscribe to parameters changed topic */
int param_changed_sub = orb_subscribe(ORB_ID(parameter_update));
struct parameter_update_s param_changed;
memset(¶m_changed, 0, sizeof(param_changed));
/* subscribe to battery topic */
int battery_sub = orb_subscribe(ORB_ID(battery_status));
struct battery_status_s battery;
memset(&battery, 0, sizeof(battery));
battery.voltage_v = 0.0f;
/* Subscribe to subsystem info topic */
int subsys_sub = orb_subscribe(ORB_ID(subsystem_info));
struct subsystem_info_s info;
memset(&info, 0, sizeof(info));
// uint8_t vehicle_state_previous = current_status.state_machine;
float voltage_previous = 0.0f;
uint64_t last_idle_time = 0;
/* now initialized */
commander_initialized = true;
thread_running = true;
uint64_t start_time = hrt_absolute_time();
/* XXX use this! */
//uint64_t failsave_ll_start_time = 0;
bool state_changed = true;
bool param_init_forced = true;
while (!thread_should_exit) {
/* Get current values */
bool new_data;
/* update parameters */
orb_check(param_changed_sub, &new_data);
if (new_data || param_init_forced) {
param_init_forced = false;
/* parameters changed */
orb_copy(ORB_ID(parameter_update), param_changed_sub, ¶m_changed);
/* update parameters */
if (!armed.armed) {
if (param_get(_param_sys_type, &(current_status.system_type)) != OK) {
warnx("failed setting new system type");
}
/* disable manual override for all systems that rely on electronic stabilization */
if (current_status.system_type == VEHICLE_TYPE_QUADROTOR ||
current_status.system_type == VEHICLE_TYPE_HEXAROTOR ||
current_status.system_type == VEHICLE_TYPE_OCTOROTOR) {
current_status.flag_external_manual_override_ok = false;
} else {
current_status.flag_external_manual_override_ok = true;
}
/* check and update system / component ID */
param_get(_param_system_id, &(current_status.system_id));
param_get(_param_component_id, &(current_status.component_id));
}
}
orb_check(sp_man_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(manual_control_setpoint), sp_man_sub, &sp_man);
}
orb_check(sp_offboard_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(offboard_control_setpoint), sp_offboard_sub, &sp_offboard);
}
orb_check(sensor_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors);
}
orb_check(diff_pres_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(differential_pressure), diff_pres_sub, &diff_pres);
last_diff_pres_time = diff_pres.timestamp;
}
orb_check(cmd_sub, &new_data);
if (new_data) {
/* got command */
orb_copy(ORB_ID(vehicle_command), cmd_sub, &cmd);
/* handle it */
handle_command(status_pub, ¤t_status, &cmd, armed_pub, &armed);
}
/* update parameters */
orb_check(param_changed_sub, &new_data);
if (new_data || param_init_forced) {
param_init_forced = false;
/* parameters changed */
orb_copy(ORB_ID(parameter_update), param_changed_sub, ¶m_changed);
/* update parameters */
if (!armed.armed) {
if (param_get(_param_sys_type, &(current_status.system_type)) != OK) {
warnx("failed setting new system type");
}
/* disable manual override for all systems that rely on electronic stabilization */
if (current_status.system_type == VEHICLE_TYPE_QUADROTOR ||
current_status.system_type == VEHICLE_TYPE_HEXAROTOR ||
current_status.system_type == VEHICLE_TYPE_OCTOROTOR) {
current_status.flag_external_manual_override_ok = false;
} else {
current_status.flag_external_manual_override_ok = true;
}
/* check and update system / component ID */
param_get(_param_system_id, &(current_status.system_id));
param_get(_param_component_id, &(current_status.component_id));
}
}
/* update safety topic */
orb_check(safety_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(safety), safety_sub, &safety);
}
/* update global position estimate */
orb_check(global_position_sub, &new_data);
if (new_data) {
/* position changed */
orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_position);
last_global_position_time = global_position.timestamp;
}
/* update local position estimate */
orb_check(local_position_sub, &new_data);
if (new_data) {
/* position changed */
orb_copy(ORB_ID(vehicle_local_position), local_position_sub, &local_position);
last_local_position_time = local_position.timestamp;
}
/* set the condition to valid if there has recently been a local position estimate */
if (hrt_absolute_time() - last_local_position_time < LOCAL_POSITION_TIMEOUT) {
current_status.condition_local_position_valid = true;
} else {
current_status.condition_local_position_valid = false;
}
/* update battery status */
orb_check(battery_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(battery_status), battery_sub, &battery);
battery_voltage = battery.voltage_v;
battery_voltage_valid = true;
/*
* Only update battery voltage estimate if system has
* been running for two and a half seconds.
*/
if (hrt_absolute_time() - start_time > 2500000) {
bat_remain = battery_remaining_estimate_voltage(battery_voltage);
}
}
/* update subsystem */
orb_check(subsys_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(subsystem_info), subsys_sub, &info);
warnx("Subsys changed: %d\n", (int)info.subsystem_type);
/* mark / unmark as present */
if (info.present) {
current_status.onboard_control_sensors_present |= info.subsystem_type;
} else {
current_status.onboard_control_sensors_present &= ~info.subsystem_type;
}
/* mark / unmark as enabled */
if (info.enabled) {
current_status.onboard_control_sensors_enabled |= info.subsystem_type;
} else {
current_status.onboard_control_sensors_enabled &= ~info.subsystem_type;
}
/* mark / unmark as ok */
if (info.ok) {
current_status.onboard_control_sensors_health |= info.subsystem_type;
} else {
current_status.onboard_control_sensors_health &= ~info.subsystem_type;
}
}
/* Slow but important 8 Hz checks */
if (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 8) == 0) {
/* XXX if armed */
if ((false /*current_status.state_machine == SYSTEM_STATE_GROUND_READY ||
current_status.state_machine == SYSTEM_STATE_AUTO ||
current_status.state_machine == SYSTEM_STATE_MANUAL*/)) {
/* armed, solid */
led_on(LED_AMBER);
} else if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) {
/* not armed */
led_toggle(LED_AMBER);
}
if (hrt_absolute_time() - gps_position.timestamp_position < 2000000) {
/* toggle GPS (blue) led at 1 Hz if GPS present but no lock, make is solid once locked */
if ((hrt_absolute_time() - gps_position.timestamp_position < 2000000)
&& (gps_position.fix_type == GPS_FIX_TYPE_3D)) {
/* GPS lock */
led_on(LED_BLUE);
} else if ((counter + 4) % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) {
/* no GPS lock, but GPS module is aquiring lock */
led_toggle(LED_BLUE);
}
} else {
/* no GPS info, don't light the blue led */
led_off(LED_BLUE);
}
/* toggle GPS led at 5 Hz in HIL mode */
if (current_status.flag_hil_enabled) {
/* hil enabled */
led_toggle(LED_BLUE);
} else if (bat_remain < 0.3f && (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT)) {
/* toggle arming (red) at 5 Hz on low battery or error */
led_toggle(LED_AMBER);
}
}
if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) {
/* compute system load */
uint64_t interval_runtime = system_load.tasks[0].total_runtime - last_idle_time;
if (last_idle_time > 0)
current_status.load = 1000 - (interval_runtime / 1000); //system load is time spent in non-idle
last_idle_time = system_load.tasks[0].total_runtime;
}
/* Check battery voltage */
/* write to sys_status */
if (battery_voltage_valid) {
current_status.voltage_battery = battery_voltage;
} else {
current_status.voltage_battery = 0.0f;
}
/* if battery voltage is getting lower, warn using buzzer, etc. */
if (battery_voltage_valid && (bat_remain < 0.15f /* XXX MAGIC NUMBER */) && (false == low_battery_voltage_actions_done)) { //TODO: add filter, or call emergency after n measurements < VOLTAGE_BATTERY_MINIMAL_MILLIVOLTS
if (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT) {
low_battery_voltage_actions_done = true;
mavlink_log_critical(mavlink_fd, "[cmd] WARNING! LOW BATTERY!");
current_status.battery_warning = VEHICLE_BATTERY_WARNING_WARNING;
}
low_voltage_counter++;
}
/* Critical, this is rather an emergency, change state machine */
else if (battery_voltage_valid && (bat_remain < 0.1f /* XXX MAGIC NUMBER */) && (false == critical_battery_voltage_actions_done && true == low_battery_voltage_actions_done)) {
if (critical_voltage_counter > CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT) {
critical_battery_voltage_actions_done = true;
mavlink_log_critical(mavlink_fd, "[cmd] EMERGENCY! CRITICAL BATTERY!");
current_status.battery_warning = VEHICLE_BATTERY_WARNING_ALERT;
// XXX implement this
// state_machine_emergency(status_pub, ¤t_status, mavlink_fd);
}
critical_voltage_counter++;
} else {
low_voltage_counter = 0;
critical_voltage_counter = 0;
}
/* End battery voltage check */
/* If in INIT state, try to proceed to STANDBY state */
if (current_status.arming_state == ARMING_STATE_INIT) {
// XXX check for sensors
arming_state_transition(status_pub, ¤t_status, ARMING_STATE_STANDBY, armed_pub, &armed, mavlink_fd);
} else {
// XXX: Add emergency stuff if sensors are lost
}
/*
* Check for valid position information.
*
* If the system has a valid position source from an onboard
* position estimator, it is safe to operate it autonomously.
* The flag_vector_flight_mode_ok flag indicates that a minimum
* set of position measurements is available.
*/
/* store current state to reason later about a state change */
// bool vector_flight_mode_ok = current_status.flag_vector_flight_mode_ok;
bool global_pos_valid = current_status.condition_global_position_valid;
bool local_pos_valid = current_status.condition_local_position_valid;
bool airspeed_valid = current_status.condition_airspeed_valid;
/* check for global or local position updates, set a timeout of 2s */
if (hrt_absolute_time() - last_global_position_time < 2000000 && hrt_absolute_time() > 2000000) {
current_status.condition_global_position_valid = true;
// XXX check for controller status and home position as well
} else {
current_status.condition_global_position_valid = false;
}
if (hrt_absolute_time() - last_local_position_time < 2000000 && hrt_absolute_time() > 2000000) {
current_status.condition_local_position_valid = true;
// XXX check for controller status and home position as well
} else {
current_status.condition_local_position_valid = false;
}
/* Check for valid airspeed/differential pressure measurements */
if (hrt_absolute_time() - last_diff_pres_time < 2000000 && hrt_absolute_time() > 2000000) {
current_status.condition_airspeed_valid = true;
} else {
current_status.condition_airspeed_valid = false;
}
/*
* Consolidate global position and local position valid flags
* for vector flight mode.
*/
// if (current_status.condition_local_position_valid ||
// current_status.condition_global_position_valid) {
// current_status.flag_vector_flight_mode_ok = true;
// } else {
// current_status.flag_vector_flight_mode_ok = false;
// }
/* consolidate state change, flag as changed if required */
if (global_pos_valid != current_status.condition_global_position_valid ||
local_pos_valid != current_status.condition_local_position_valid ||
airspeed_valid != current_status.condition_airspeed_valid) {
state_changed = true;
}
/*
* Mark the position of the first position lock as return to launch (RTL)
* position. The MAV will return here on command or emergency.
*
* Conditions:
*
* 1) The system aquired position lock just now
* 2) The system has not aquired position lock before
* 3) The system is not armed (on the ground)
*/
// if (!current_status.flag_valid_launch_position &&
// !vector_flight_mode_ok && current_status.flag_vector_flight_mode_ok &&
// !current_status.flag_system_armed) {
// first time a valid position, store it and emit it
// // XXX implement storage and publication of RTL position
// current_status.flag_valid_launch_position = true;
// current_status.flag_auto_flight_mode_ok = true;
// state_changed = true;
// }
orb_check(gps_sub, &new_data);
if (new_data) {
orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps_position);
/* check for first, long-term and valid GPS lock -> set home position */
float hdop_m = gps_position.eph_m;
float vdop_m = gps_position.epv_m;
/* check if gps fix is ok */
// XXX magic number
float hdop_threshold_m = 4.0f;
float vdop_threshold_m = 8.0f;
/*
* If horizontal dilution of precision (hdop / eph)
* and vertical diluation of precision (vdop / epv)
* are below a certain threshold (e.g. 4 m), AND
* home position is not yet set AND the last GPS
* GPS measurement is not older than two seconds AND
* the system is currently not armed, set home
* position to the current position.
*/
if (gps_position.fix_type == GPS_FIX_TYPE_3D
&& (hdop_m < hdop_threshold_m)
&& (vdop_m < vdop_threshold_m) // XXX note that vdop is 0 for mtk
&& !home_position_set
&& (hrt_absolute_time() - gps_position.timestamp_position < 2000000)
&& !armed.armed) {
warnx("setting home position");
/* copy position data to uORB home message, store it locally as well */
home.lat = gps_position.lat;
home.lon = gps_position.lon;
home.alt = gps_position.alt;
home.eph_m = gps_position.eph_m;
home.epv_m = gps_position.epv_m;
home.s_variance_m_s = gps_position.s_variance_m_s;
home.p_variance_m = gps_position.p_variance_m;
/* announce new home position */
if (home_pub > 0) {
orb_publish(ORB_ID(home_position), home_pub, &home);
} else {
home_pub = orb_advertise(ORB_ID(home_position), &home);
}
/* mark home position as set */
home_position_set = true;
tune_positive();
}
}
/* ignore RC signals if in offboard control mode */
if (!current_status.offboard_control_signal_found_once && sp_man.timestamp != 0) {
/* Start RC state check */
if ((hrt_absolute_time() - sp_man.timestamp) < 100000) {
/*
* Check if manual control modes have to be switched
*/
if (!isfinite(sp_man.mode_switch)) {
warnx("mode sw not finite");
/* no valid stick position, go to default */
current_status.mode_switch = MODE_SWITCH_MANUAL;
} else if (sp_man.mode_switch < -STICK_ON_OFF_LIMIT) {
/* bottom stick position, go to manual mode */
current_status.mode_switch = MODE_SWITCH_MANUAL;
} else if (sp_man.mode_switch > STICK_ON_OFF_LIMIT) {
/* top stick position, set auto/mission for all vehicle types */
current_status.mode_switch = MODE_SWITCH_AUTO;
} else {
/* center stick position, set seatbelt/simple control */
current_status.mode_switch = MODE_SWITCH_SEATBELT;
}
// warnx("man ctrl mode: %d\n", (int)current_status.manual_control_mode);
/*
* Check if land/RTL is requested
*/
if (!isfinite(sp_man.return_switch)) {
/* this switch is not properly mapped, set default */
current_status.return_switch = RETURN_SWITCH_NONE;
} else if (sp_man.return_switch < -STICK_ON_OFF_LIMIT) {
/* bottom stick position, set altitude hold */
current_status.return_switch = RETURN_SWITCH_NONE;
} else if (sp_man.return_switch > STICK_ON_OFF_LIMIT) {
/* top stick position */
current_status.return_switch = RETURN_SWITCH_RETURN;
} else {
/* center stick position, set default */
current_status.return_switch = RETURN_SWITCH_NONE;
}
/* check mission switch */
if (!isfinite(sp_man.mission_switch)) {
/* this switch is not properly mapped, set default */
current_status.mission_switch = MISSION_SWITCH_NONE;
} else if (sp_man.mission_switch > STICK_ON_OFF_LIMIT) {
/* top switch position */
current_status.mission_switch = MISSION_SWITCH_MISSION;
} else if (sp_man.mission_switch < -STICK_ON_OFF_LIMIT) {
/* bottom switch position */
current_status.mission_switch = MISSION_SWITCH_NONE;
} else {
/* center switch position, set default */
current_status.mission_switch = MISSION_SWITCH_NONE; // XXX default?
}
/* Now it's time to handle the stick inputs */
switch (current_status.arming_state) {
/* evaluate the navigation state when disarmed */
case ARMING_STATE_STANDBY:
/* just manual, XXX this might depend on the return switch */
if (current_status.mode_switch == MODE_SWITCH_MANUAL) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL_STANDBY rejected");
}
/* Try seatbelt or fallback to manual */
} else if (current_status.mode_switch == MODE_SWITCH_SEATBELT) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL_STANDBY rejected");
}
}
/* Try auto or fallback to seatbelt or even manual */
} else if (current_status.mode_switch == MODE_SWITCH_AUTO) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_AUTO_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// first fallback to SEATBELT_STANDY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// or fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL_STANDBY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL_STANDBY rejected");
}
}
}
}
break;
/* evaluate the navigation state when armed */
case ARMING_STATE_ARMED:
/* Always accept manual mode */
if (current_status.mode_switch == MODE_SWITCH_MANUAL) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
/* SEATBELT_STANDBY (fallback: MANUAL) */
} else if (current_status.mode_switch == MODE_SWITCH_SEATBELT
&& current_status.return_switch == RETURN_SWITCH_NONE) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
/* SEATBELT_DESCENT (fallback: MANUAL) */
} else if (current_status.mode_switch == MODE_SWITCH_SEATBELT
&& current_status.return_switch == RETURN_SWITCH_RETURN) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT_DESCENT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
/* AUTO_LOITER (fallback: SEATBELT, MANUAL) */
} else if (current_status.mode_switch == MODE_SWITCH_AUTO
&& current_status.return_switch == RETURN_SWITCH_NONE
&& current_status.mission_switch == MISSION_SWITCH_NONE) {
/* we might come from the disarmed state AUTO_STANDBY */
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_AUTO_READY, control_mode_pub, &control_mode, mavlink_fd) != OK) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
/* or from some other armed state like SEATBELT or MANUAL */
} else if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_AUTO_LOITER, control_mode_pub, &control_mode, mavlink_fd) != OK) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
}
/* AUTO_MISSION (fallback: SEATBELT, MANUAL) */
} else if (current_status.mode_switch == MODE_SWITCH_AUTO
&& current_status.return_switch == RETURN_SWITCH_NONE
&& current_status.mission_switch == MISSION_SWITCH_MISSION) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_AUTO_MISSION, control_mode_pub, &control_mode, mavlink_fd) != OK) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
}
/* AUTO_RTL (fallback: SEATBELT_DESCENT, MANUAL) */
} else if (current_status.mode_switch == MODE_SWITCH_AUTO
&& current_status.return_switch == RETURN_SWITCH_RETURN
&& (current_status.mission_switch == MISSION_SWITCH_NONE || current_status.mission_switch == MISSION_SWITCH_MISSION)) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_AUTO_RTL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_SEATBELT_DESCENT, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// fallback to MANUAL_STANDBY
if (navigation_state_transition(status_pub, ¤t_status, NAVIGATION_STATE_MANUAL, control_mode_pub, &control_mode, mavlink_fd) != OK) {
// These is not supposed to happen
warnx("ERROR: Navigation state MANUAL rejected");
}
}
}
}
break;
// XXX we might be missing something that triggers a transition from RTL to LAND
case ARMING_STATE_ARMED_ERROR:
// XXX work out fail-safe scenarios
break;
case ARMING_STATE_STANDBY_ERROR:
// XXX work out fail-safe scenarios
break;
case ARMING_STATE_REBOOT:
// XXX I don't think we should end up here
break;
case ARMING_STATE_IN_AIR_RESTORE:
// XXX not sure what to do here
break;
default:
break;
}
/* handle the case where RC signal was regained */
if (!current_status.rc_signal_found_once) {
current_status.rc_signal_found_once = true;
mavlink_log_critical(mavlink_fd, "DETECTED RC SIGNAL FIRST TIME.");
} else {
if (current_status.rc_signal_lost) {
mavlink_log_critical(mavlink_fd, "[cmd] RECOVERY - RC SIGNAL GAINED!");
}
}
/*
* Check if left stick is in lower left position --> switch to standby state.
* Do this only for multirotors, not for fixed wing aircraft.
*/
// printf("checking\n");
if ((sp_man.yaw < -STICK_ON_OFF_LIMIT) && (sp_man.throttle < STICK_THRUST_RANGE * 0.2f)) {
if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) {
if((current_status.system_type == VEHICLE_TYPE_QUADROTOR) ||
(current_status.system_type == VEHICLE_TYPE_HEXAROTOR) ||
(current_status.system_type == VEHICLE_TYPE_OCTOROTOR)
) {
if (current_status.mode_switch != MODE_SWITCH_MANUAL) {
mavlink_log_critical(mavlink_fd, "DISARM DENY, go manual mode first");
tune_negative();
} else {
arming_state_transition(status_pub, ¤t_status, ARMING_STATE_STANDBY, armed_pub, &armed, mavlink_fd);
tune_positive();
}
} else {
mavlink_log_critical(mavlink_fd, "DISARM not allowed");
tune_negative();
}
stick_off_counter = 0;
} else {
stick_off_counter++;
stick_on_counter = 0;
}
}
/* check if left stick is in lower right position and we're in manual --> arm */
if (!control_mode.flag_control_position_enabled && !control_mode.flag_control_velocity_enabled &&
sp_man.yaw > STICK_ON_OFF_LIMIT &&
sp_man.throttle < STICK_THRUST_RANGE * 0.1f) {
if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) {
arming_state_transition(status_pub, ¤t_status, ARMING_STATE_ARMED, armed_pub, &armed, mavlink_fd);
stick_on_counter = 0;
tune_positive();
} else {
stick_on_counter++;
stick_off_counter = 0;
}
}
current_status.rc_signal_cutting_off = false;
current_status.rc_signal_lost = false;
current_status.rc_signal_lost_interval = 0;
} else {
/* print error message for first RC glitch and then every 5 s / 5000 ms) */
if (!current_status.rc_signal_cutting_off || ((hrt_absolute_time() - last_print_time) > 5000000)) {
/* only complain if the offboard control is NOT active */
current_status.rc_signal_cutting_off = true;
mavlink_log_critical(mavlink_fd, "CRITICAL - NO REMOTE SIGNAL!");
if (!current_status.rc_signal_cutting_off) {
printf("Reason: not rc_signal_cutting_off\n");
} else {
printf("last print time: %llu\n", last_print_time);
}
last_print_time = hrt_absolute_time();
}
/* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */
current_status.rc_signal_lost_interval = hrt_absolute_time() - sp_man.timestamp;
/* if the RC signal is gone for a full second, consider it lost */
if (current_status.rc_signal_lost_interval > 1000000) {
current_status.rc_signal_lost = true;
current_status.failsave_lowlevel = true;
state_changed = true;
}
// if (hrt_absolute_time() - current_status.failsave_ll_start_time > failsafe_lowlevel_timeout_ms*1000) {
// publish_armed_status(¤t_status);
// }
}
}
/* End mode switch */
/* END RC state check */
/* State machine update for offboard control */
if (!current_status.rc_signal_found_once && sp_offboard.timestamp != 0) {
if ((hrt_absolute_time() - sp_offboard.timestamp) < 5000000) {
// /* decide about attitude control flag, enable in att/pos/vel */
// bool attitude_ctrl_enabled = (sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE ||
// sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_VELOCITY ||
// sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_POSITION);
// /* decide about rate control flag, enable it always XXX (for now) */
// bool rates_ctrl_enabled = true;
// /* set up control mode */
// if (current_status.flag_control_attitude_enabled != attitude_ctrl_enabled) {
// current_status.flag_control_attitude_enabled = attitude_ctrl_enabled;
// state_changed = true;
// }
// if (current_status.flag_control_rates_enabled != rates_ctrl_enabled) {
// current_status.flag_control_rates_enabled = rates_ctrl_enabled;
// state_changed = true;
// }
// /* handle the case where offboard control signal was regained */
// if (!current_status.offboard_control_signal_found_once) {
// current_status.offboard_control_signal_found_once = true;
// /* enable offboard control, disable manual input */
// current_status.flag_control_manual_enabled = false;
// current_status.flag_control_offboard_enabled = true;
// state_changed = true;
// tune_positive();
// mavlink_log_critical(mavlink_fd, "DETECTED OFFBOARD SIGNAL FIRST");
// } else {
// if (current_status.offboard_control_signal_lost) {
// mavlink_log_critical(mavlink_fd, "RECOVERY OFFBOARD CONTROL");
// state_changed = true;
// tune_positive();
// }
// }
current_status.offboard_control_signal_weak = false;
current_status.offboard_control_signal_lost = false;
current_status.offboard_control_signal_lost_interval = 0;
// XXX check if this is correct
/* arm / disarm on request */
if (sp_offboard.armed && !armed.armed) {
arming_state_transition(status_pub, ¤t_status, ARMING_STATE_ARMED, armed_pub, &armed, mavlink_fd);
} else if (!sp_offboard.armed && armed.armed) {
arming_state_transition(status_pub, ¤t_status, ARMING_STATE_STANDBY, armed_pub, &armed, mavlink_fd);
}
} else {
/* print error message for first RC glitch and then every 5 s / 5000 ms) */
if (!current_status.offboard_control_signal_weak || ((hrt_absolute_time() - last_print_time) > 5000000)) {
current_status.offboard_control_signal_weak = true;
mavlink_log_critical(mavlink_fd, "CRIT:NO OFFBOARD CONTROL!");
last_print_time = hrt_absolute_time();
}
/* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */
current_status.offboard_control_signal_lost_interval = hrt_absolute_time() - sp_offboard.timestamp;
/* if the signal is gone for 0.1 seconds, consider it lost */
if (current_status.offboard_control_signal_lost_interval > 100000) {
current_status.offboard_control_signal_lost = true;
current_status.failsave_lowlevel_start_time = hrt_absolute_time();
tune_positive();
/* kill motors after timeout */
if (hrt_absolute_time() - current_status.failsave_lowlevel_start_time > failsafe_lowlevel_timeout_ms * 1000) {
current_status.failsave_lowlevel = true;
state_changed = true;
}
}
}
}
current_status.counter++;
current_status.timestamp = hrt_absolute_time();
// XXX this is missing
/* If full run came back clean, transition to standby */
// if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT &&
// current_status.flag_preflight_gyro_calibration == false &&
// current_status.flag_preflight_mag_calibration == false &&
// current_status.flag_preflight_accel_calibration == false) {
// /* All ok, no calibration going on, go to standby */
// do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY);
// }
/* publish at least with 1 Hz */
if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 || state_changed) {
orb_publish(ORB_ID(vehicle_status), status_pub, ¤t_status);
state_changed = false;
}
/* Store old modes to detect and act on state transitions */
voltage_previous = current_status.voltage_battery;
/* play tone according to evaluation result */
/* check if we recently armed */
if (!arm_tune_played && armed.armed && ( !safety.safety_switch_available || (safety.safety_off && safety.safety_switch_available))) {
if (tune_arm() == OK)
arm_tune_played = true;
/* Trigger audio event for low battery */
} else if (bat_remain < 0.1f && battery_voltage_valid) {
if (tune_critical_bat() == OK)
battery_tune_played = true;
} else if (bat_remain < 0.2f && battery_voltage_valid) {
if (tune_low_bat() == OK)
battery_tune_played = true;
} else if(battery_tune_played) {
tune_stop();
battery_tune_played = false;
}
/* reset arm_tune_played when disarmed */
if (!(armed.armed && ( !safety.safety_switch_available || (safety.safety_off && safety.safety_switch_available)))) {
arm_tune_played = false;
}
/* XXX use this voltage_previous */
fflush(stdout);
counter++;
usleep(COMMANDER_MONITORING_INTERVAL);
}
/* wait for threads to complete */
pthread_join(commander_low_prio_thread, NULL);
/* close fds */
led_deinit();
buzzer_deinit();
close(sp_man_sub);
close(sp_offboard_sub);
close(global_position_sub);
close(sensor_sub);
close(safety_sub);
close(cmd_sub);
close(subsys_sub);
warnx("exiting");
fflush(stdout);
thread_running = false;
return 0;
}
void *commander_low_prio_loop(void *arg)
{
/* Set thread name */
prctl(PR_SET_NAME, "commander low prio", getpid());
while (!thread_should_exit) {
switch (low_prio_task) {
case LOW_PRIO_TASK_PARAM_LOAD:
if (0 == param_load_default()) {
mavlink_log_info(mavlink_fd, "Param load success");
} else {
mavlink_log_critical(mavlink_fd, "Param load ERROR");
tune_error();
}
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_PARAM_SAVE:
if (0 == param_save_default()) {
mavlink_log_info(mavlink_fd, "Param save success");
} else {
mavlink_log_critical(mavlink_fd, "Param save ERROR");
tune_error();
}
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_GYRO_CALIBRATION:
do_gyro_calibration(mavlink_fd);
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_MAG_CALIBRATION:
do_mag_calibration(mavlink_fd);
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_ALTITUDE_CALIBRATION:
// do_baro_calibration(mavlink_fd);
case LOW_PRIO_TASK_RC_CALIBRATION:
// do_rc_calibration(mavlink_fd);
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_ACCEL_CALIBRATION:
do_accel_calibration(mavlink_fd);
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_AIRSPEED_CALIBRATION:
do_airspeed_calibration(mavlink_fd);
low_prio_task = LOW_PRIO_TASK_NONE;
break;
case LOW_PRIO_TASK_NONE:
default:
/* slow down to 10Hz */
usleep(100000);
break;
}
}
return 0;
}