/****************************************************************************
*
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file mag_calibration.cpp
*
* Magnetometer calibration routine
*/
#include "mag_calibration.h"
#include "commander_helper.h"
#include "calibration_routines.h"
#include "calibration_messages.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <poll.h>
#include <math.h>
#include <fcntl.h>
#include <drivers/drv_hrt.h>
#include <uORB/topics/sensor_combined.h>
#include <drivers/drv_mag.h>
#include <mavlink/mavlink_log.h>
#include <systemlib/param/param.h>
#include <systemlib/err.h>
/* oddly, ERROR is not defined for c++ */
#ifdef ERROR
# undef ERROR
#endif
static const int ERROR = -1;
static const char *sensor_name = "mag";
int do_mag_calibration(int mavlink_fd)
{
mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
mavlink_log_info(mavlink_fd, "don't move system");
/* 45 seconds */
uint64_t calibration_interval = 45 * 1000 * 1000;
/* maximum 500 values */
const unsigned int calibration_maxcount = 500;
unsigned int calibration_counter;
struct mag_scale mscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int res = OK;
/* erase old calibration */
int fd = open(MAG_DEVICE_PATH, O_RDONLY);
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
if (res == OK) {
/* calibrate range */
res = ioctl(fd, MAGIOCCALIBRATE, fd);
if (res != OK) {
mavlink_log_critical(mavlink_fd, "Skipped scale calibration");
/* this is non-fatal - mark it accordingly */
res = OK;
}
}
close(fd);
float *x = NULL;
float *y = NULL;
float *z = NULL;
if (res == OK) {
/* allocate memory */
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20);
x = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
y = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
z = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
if (x == NULL || y == NULL || z == NULL) {
mavlink_log_critical(mavlink_fd, "ERROR: out of memory");
res = ERROR;
return res;
}
} else {
/* exit */
return ERROR;
}
if (res == OK) {
int sub_mag = orb_subscribe(ORB_ID(sensor_mag));
struct mag_report mag;
/* limit update rate to get equally spaced measurements over time (in ms) */
orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount);
/* calibrate offsets */
uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval;
unsigned poll_errcount = 0;
mavlink_log_info(mavlink_fd, "rotate in a figure 8 around all axis");
calibration_counter = 0;
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter < calibration_maxcount) {
/* wait blocking for new data */
struct pollfd fds[1];
fds[0].fd = sub_mag;
fds[0].events = POLLIN;
int poll_ret = poll(fds, 1, 1000);
if (poll_ret > 0) {
orb_copy(ORB_ID(sensor_mag), sub_mag, &mag);
x[calibration_counter] = mag.x;
y[calibration_counter] = mag.y;
z[calibration_counter] = mag.z;
calibration_counter++;
if (calibration_counter % (calibration_maxcount / 20) == 0)
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20 + (calibration_counter * 50) / calibration_maxcount);
} else {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
res = ERROR;
break;
}
}
close(sub_mag);
}
float sphere_x;
float sphere_y;
float sphere_z;
float sphere_radius;
if (res == OK) {
/* sphere fit */
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 70);
sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius);
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 80);
if (!isfinite(sphere_x) || !isfinite(sphere_y) || !isfinite(sphere_z)) {
mavlink_log_critical(mavlink_fd, "ERROR: NaN in sphere fit");
res = ERROR;
}
}
if (x != NULL)
free(x);
if (y != NULL)
free(y);
if (z != NULL)
free(z);
if (res == OK) {
/* apply calibration and set parameters */
struct mag_scale mscale;
fd = open(MAG_DEVICE_PATH, 0);
res = ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_log_critical(mavlink_fd, "ERROR: failed to get current calibration");
}
if (res == OK) {
mscale.x_offset = sphere_x;
mscale.y_offset = sphere_y;
mscale.z_offset = sphere_z;
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
close(fd);
if (res == OK) {
/* set parameters */
if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset)))
res = ERROR;
if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale)))
res = ERROR;
if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale)))
res = ERROR;
if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale)))
res = ERROR;
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
}
mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 90);
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
}
mavlink_log_info(mavlink_fd, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset,
(double)mscale.y_offset, (double)mscale.z_offset);
mavlink_log_info(mavlink_fd, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale,
(double)mscale.y_scale, (double)mscale.z_scale);
if (res == OK) {
mavlink_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
} else {
mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
}
return res;
}