/****************************************************************************
*
* Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file fw_pos_control_l1_params.c
*
* Parameters defined by the L1 position control task
*
* @author Lorenz Meier <lm@inf.ethz.ch>
*/
#include <nuttx/config.h>
#include <systemlib/param/param.h>
/*
* Controller parameters, accessible via MAVLink
*
*/
/**
* L1 period
*
* This is the L1 distance and defines the tracking
* point ahead of the aircraft its following.
* A value of 25 meters works for most aircraft. Shorten
* slowly during tuning until response is sharp without oscillation.
*
* @min 1.0
* @max 100.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_L1_PERIOD, 25.0f);
/**
* L1 damping
*
* Damping factor for L1 control.
*
* @min 0.6
* @max 0.9
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_L1_DAMPING, 0.75f);
/**
* Default Loiter Radius
*
* This radius is used when no other loiter radius is set.
*
* @min 10.0
* @max 100.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_LOITER_R, 50.0f);
/**
* Cruise throttle
*
* This is the throttle setting required to achieve the desired cruise speed. Most airframes have a value of 0.5-0.7.
*
* @min 0.0
* @max 1.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_THR_CRUISE, 0.7f);
/**
* Negative pitch limit
*
* The minimum negative pitch the controller will output.
*
* @unit degrees
* @min -60.0
* @max 0.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_P_LIM_MIN, -45.0f);
/**
* Positive pitch limit
*
* The maximum positive pitch the controller will output.
*
* @unit degrees
* @min 0.0
* @max 60.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_P_LIM_MAX, 45.0f);
PARAM_DEFINE_FLOAT(FW_R_LIM, 45.0f);
PARAM_DEFINE_FLOAT(FW_THR_MIN, 0.0f);
PARAM_DEFINE_FLOAT(FW_THR_MAX, 1.0f);
PARAM_DEFINE_FLOAT(FW_THR_LND_MAX, 1.0f);
PARAM_DEFINE_FLOAT(FW_T_CLMB_MAX, 5.0f);
PARAM_DEFINE_FLOAT(FW_T_SINK_MIN, 2.0f);
PARAM_DEFINE_FLOAT(FW_T_TIME_CONST, 5.0f);
PARAM_DEFINE_FLOAT(FW_T_THR_DAMP, 0.5f);
PARAM_DEFINE_FLOAT(FW_T_INTEG_GAIN, 0.1f);
PARAM_DEFINE_FLOAT(FW_T_VERT_ACC, 7.0f);
PARAM_DEFINE_FLOAT(FW_T_HGT_OMEGA, 3.0f);
PARAM_DEFINE_FLOAT(FW_T_SPD_OMEGA, 2.0f);
PARAM_DEFINE_FLOAT(FW_T_RLL2THR, 10.0f);
PARAM_DEFINE_FLOAT(FW_T_SPDWEIGHT, 1.0f);
PARAM_DEFINE_FLOAT(FW_T_PTCH_DAMP, 0.0f);
PARAM_DEFINE_FLOAT(FW_T_SINK_MAX, 5.0f);
PARAM_DEFINE_FLOAT(FW_T_HRATE_P, 0.05f);
PARAM_DEFINE_FLOAT(FW_T_SRATE_P, 0.05f);
PARAM_DEFINE_FLOAT(FW_LND_ANG, 5.0f);
PARAM_DEFINE_FLOAT(FW_LND_SLLR, 0.9f);
PARAM_DEFINE_FLOAT(FW_LND_HVIRT, 10.0f);
PARAM_DEFINE_FLOAT(FW_LND_FLALT, 15.0f);
PARAM_DEFINE_FLOAT(FW_LND_TLALT, 5.0f);
PARAM_DEFINE_FLOAT(FW_LND_HHDIST, 15.0f);
