/****************************************************************************
*
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
* Author: Anton Babushkin <anton.babushkin@me.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file gpio_led.c
*
* Status LED via GPIO driver.
*
* @author Anton Babushkin <anton.babushkin@me.com>
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <stdbool.h>
#include <nuttx/wqueue.h>
#include <nuttx/clock.h>
#include <systemlib/systemlib.h>
#include <systemlib/err.h>
#include <uORB/uORB.h>
#include <uORB/topics/vehicle_status.h>
#include <poll.h>
#include <drivers/drv_gpio.h>
#include <modules/px4iofirmware/protocol.h>
struct gpio_led_s {
struct work_s work;
int gpio_fd;
bool use_io;
int pin;
struct vehicle_status_s status;
int vehicle_status_sub;
bool led_state;
int counter;
};
static struct gpio_led_s gpio_led_data;
static bool gpio_led_started = false;
__EXPORT int gpio_led_main(int argc, char *argv[]);
void gpio_led_start(FAR void *arg);
void gpio_led_cycle(FAR void *arg);
int gpio_led_main(int argc, char *argv[])
{
if (argc < 2) {
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1
errx(1, "usage: gpio_led {start|stop} [-p <1|2|a1|a2|r1|r2>]\n"
"\t-p\tUse pin:\n"
"\t\t1\tPX4FMU GPIO_EXT1 (default)\n"
"\t\t2\tPX4FMU GPIO_EXT2\n"
"\t\ta1\tPX4IO ACC1\n"
"\t\ta2\tPX4IO ACC2\n"
"\t\tr1\tPX4IO RELAY1\n"
"\t\tr2\tPX4IO RELAY2"
);
#endif
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2
errx(1, "usage: gpio_led {start|stop} [-p <n>]\n"
"\t-p <n>\tUse specified AUX OUT pin number (default: 1)"
);
#endif
} else {
if (!strcmp(argv[1], "start")) {
if (gpio_led_started) {
errx(1, "already running");
}
bool use_io = false;
/* by default use GPIO_EXT_1 on FMUv1 and GPIO_SERVO_1 on FMUv2 */
int pin = 1;
/* pin name to display */
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1
char *pin_name = "PX4FMU GPIO_EXT1";
#endif
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2
char pin_name[] = "AUX OUT 1";
#endif
if (argc > 2) {
if (!strcmp(argv[2], "-p")) {
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1
if (!strcmp(argv[3], "1")) {
use_io = false;
pin = GPIO_EXT_1;
pin_name = "PX4FMU GPIO_EXT1";
} else if (!strcmp(argv[3], "2")) {
use_io = false;
pin = GPIO_EXT_2;
pin_name = "PX4FMU GPIO_EXT2";
} else if (!strcmp(argv[3], "a1")) {
use_io = true;
pin = PX4IO_P_SETUP_RELAYS_ACC1;
pin_name = "PX4IO ACC1";
} else if (!strcmp(argv[3], "a2")) {
use_io = true;
pin = PX4IO_P_SETUP_RELAYS_ACC2;
pin_name = "PX4IO ACC2";
} else if (!strcmp(argv[3], "r1")) {
use_io = true;
pin = PX4IO_P_SETUP_RELAYS_POWER1;
pin_name = "PX4IO RELAY1";
} else if (!strcmp(argv[3], "r2")) {
use_io = true;
pin = PX4IO_P_SETUP_RELAYS_POWER2;
pin_name = "PX4IO RELAY2";
} else {
errx(1, "unsupported pin: %s", argv[3]);
}
#endif
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2
unsigned int n = strtoul(argv[3], NULL, 10);
if (n >= 1 && n <= 6) {
use_io = false;
pin = 1 << (n - 1);
snprintf(pin_name, sizeof(pin_name), "AUX OUT %d", n);
} else {
errx(1, "unsupported pin: %s", argv[3]);
}
#endif
}
}
memset(&gpio_led_data, 0, sizeof(gpio_led_data));
gpio_led_data.use_io = use_io;
gpio_led_data.pin = pin;
int ret = work_queue(LPWORK, &gpio_led_data.work, gpio_led_start, &gpio_led_data, 0);
if (ret != 0) {
errx(1, "failed to queue work: %d", ret);
} else {
gpio_led_started = true;
warnx("start, using pin: %s", pin_name);
exit(0);
}
} else if (!strcmp(argv[1], "stop")) {
if (gpio_led_started) {
gpio_led_started = false;
warnx("stop");
exit(0);
} else {
errx(1, "not running");
}
} else {
errx(1, "unrecognized command '%s', only supporting 'start' or 'stop'", argv[1]);
}
}
}
void gpio_led_start(FAR void *arg)
{
FAR struct gpio_led_s *priv = (FAR struct gpio_led_s *)arg;
char *gpio_dev;
if (priv->use_io) {
gpio_dev = PX4IO_DEVICE_PATH;
} else {
gpio_dev = PX4FMU_DEVICE_PATH;
}
/* open GPIO device */
priv->gpio_fd = open(gpio_dev, 0);
if (priv->gpio_fd < 0) {
// TODO find way to print errors
//printf("gpio_led: GPIO device \"%s\" open fail\n", gpio_dev);
gpio_led_started = false;
return;
}
/* configure GPIO pin */
/* px4fmu only, px4io doesn't support GPIO_SET_OUTPUT and will ignore */
ioctl(priv->gpio_fd, GPIO_SET_OUTPUT, priv->pin);
/* initialize vehicle status structure */
memset(&priv->status, 0, sizeof(priv->status));
/* subscribe to vehicle status topic */
priv->vehicle_status_sub = orb_subscribe(ORB_ID(vehicle_status));
/* add worker to queue */
int ret = work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, 0);
if (ret != 0) {
// TODO find way to print errors
//printf("gpio_led: failed to queue work: %d\n", ret);
gpio_led_started = false;
return;
}
}
void gpio_led_cycle(FAR void *arg)
{
FAR struct gpio_led_s *priv = (FAR struct gpio_led_s *)arg;
/* check for status updates*/
bool updated;
orb_check(priv->vehicle_status_sub, &updated);
if (updated) {
orb_copy(ORB_ID(vehicle_status), priv->vehicle_status_sub, &priv->status);
}
/* select pattern for current status */
int pattern = 0;
if (priv->status.arming_state == ARMING_STATE_ARMED_ERROR) {
pattern = 0x2A; // *_*_*_ fast blink (armed, error)
} else if (priv->status.arming_state == ARMING_STATE_ARMED) {
if (priv->status.battery_warning == VEHICLE_BATTERY_WARNING_NONE && !priv->status.failsafe) {
pattern = 0x3f; // ****** solid (armed)
} else {
pattern = 0x3e; // *****_ slow blink (armed, battery low or failsafe)
}
} else if (priv->status.arming_state == ARMING_STATE_STANDBY) {
pattern = 0x38; // ***___ slow blink (disarmed, ready)
} else if (priv->status.arming_state == ARMING_STATE_STANDBY_ERROR) {
pattern = 0x28; // *_*___ slow double blink (disarmed, error)
}
/* blink pattern */
bool led_state_new = (pattern & (1 << priv->counter)) != 0;
if (led_state_new != priv->led_state) {
priv->led_state = led_state_new;
if (led_state_new) {
ioctl(priv->gpio_fd, GPIO_SET, priv->pin);
} else {
ioctl(priv->gpio_fd, GPIO_CLEAR, priv->pin);
}
}
priv->counter++;
if (priv->counter > 5) {
priv->counter = 0;
}
/* repeat cycle at 5 Hz */
if (gpio_led_started) {
work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, USEC2TICK(200000));
} else {
/* switch off LED on stop */
ioctl(priv->gpio_fd, GPIO_CLEAR, priv->pin);
}
}