path: root/src/modules/mavlink_onboard/mavlink.c

/****************************************************************************
 *
 *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
 *   Author: Lorenz Meier <lm@inf.ethz.ch>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file mavlink.c
 * MAVLink 1.0 protocol implementation.
 *
 * @author Lorenz Meier <lm@inf.ethz.ch>
 */

#include <nuttx/config.h>
#include <unistd.h>
#include <pthread.h>
#include <stdio.h>
#include <math.h>
#include <stdbool.h>
#include <fcntl.h>
#include <mqueue.h>
#include <string.h>
#include "mavlink_bridge_header.h"
#include <drivers/drv_hrt.h>
#include <time.h>
#include <float.h>
#include <unistd.h>
#include <nuttx/sched.h>
#include <sys/prctl.h>
#include <termios.h>
#include <errno.h>
#include <stdlib.h>
#include <poll.h>

#include <systemlib/param/param.h>
#include <systemlib/systemlib.h>
#include <systemlib/err.h>

#include "orb_topics.h"
#include "util.h"

__EXPORT int mavlink_onboard_main(int argc, char *argv[]);

static int mavlink_thread_main(int argc, char *argv[]);

/* thread state */
volatile bool thread_should_exit = false;
static volatile bool thread_running = false;
static int mavlink_task;

/* pthreads */
static pthread_t receive_thread;

/* terminate MAVLink on user request - disabled by default */
static bool mavlink_link_termination_allowed = false;

mavlink_system_t mavlink_system = {
	100,
	50,
	MAV_TYPE_QUADROTOR,
	0,
	0,
	0
}; // System ID, 1-255, Component/Subsystem ID, 1-255

/* XXX not widely used */
uint8_t chan = MAVLINK_COMM_0;

/* XXX probably should be in a header... */
extern pthread_t receive_start(int uart);

bool mavlink_hil_enabled = false;

/* protocol interface */
static int uart;
static int baudrate;
bool gcs_link = true;

/* interface mode */
static enum {
	MAVLINK_INTERFACE_MODE_OFFBOARD,
	MAVLINK_INTERFACE_MODE_ONBOARD
} mavlink_link_mode = MAVLINK_INTERFACE_MODE_OFFBOARD;

static void mavlink_update_system(void);
static int mavlink_open_uart(int baudrate, const char *uart_name, struct termios *uart_config_original, bool *is_usb);
static void usage(void);

/****************************************************************************
 * Public Functions
 ****************************************************************************/

int mavlink_open_uart(int baud, const char *uart_name, struct termios *uart_config_original, bool *is_usb)
{
	/* process baud rate */
	int speed;

	switch (baud) {
	case 0:      speed = B0;      break;

	case 50:     speed = B50;     break;

	case 75:     speed = B75;     break;

	case 110:    speed = B110;    break;

	case 134:    speed = B134;    break;

	case 150:    speed = B150;    break;

	case 200:    speed = B200;    break;

	case 300:    speed = B300;    break;

	case 600:    speed = B600;    break;

	case 1200:   speed = B1200;   break;

	case 1800:   speed = B1800;   break;

	case 2400:   speed = B2400;   break;

	case 4800:   speed = B4800;   break;

	case 9600:   speed = B9600;   break;

	case 19200:  speed = B19200;  break;

	case 38400:  speed = B38400;  break;

	case 57600:  speed = B57600;  break;

	case 115200: speed = B115200; break;

	case 230400: speed = B230400; break;

	case 460800: speed = B460800; break;

	case 921600: speed = B921600; break;

	default:
		warnx("ERROR: Unsupported baudrate: %d\n\tsupported examples:\n\n\t9600\n19200\n38400\n57600\n115200\n230400\n460800\n921600", baud);
		return -EINVAL;
	}

	/* open uart */
	warnx("UART is %s, baudrate is %d", uart_name, baud);
	uart = open(uart_name, O_RDWR | O_NOCTTY);

	/* Try to set baud rate */
	struct termios uart_config;
	int termios_state;
	*is_usb = false;

	if (strcmp(uart_name, "/dev/ttyACM0") != OK) {
		/* Back up the original uart configuration to restore it after exit */
		if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) {
			warnx("ERROR getting baudrate / termios config for %s: %d", uart_name, termios_state);
			close(uart);
			return -1;
		}

		/* Fill the struct for the new configuration */
		tcgetattr(uart, &uart_config);

		/* Clear ONLCR flag (which appends a CR for every LF) */
		uart_config.c_oflag &= ~ONLCR;

		/* Set baud rate */
		if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) {
			warnx("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)", uart_name, termios_state);
			close(uart);
			return -1;
		}


		if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) {
			warnx("ERROR setting baudrate / termios config for %s (tcsetattr)", uart_name);
			close(uart);
			return -1;
		}

	} else {
		*is_usb = true;
	}

	return uart;
}

void 
mavlink_send_uart_bytes(mavlink_channel_t channel, uint8_t *ch, int length)
{
	write(uart, ch, (size_t)(sizeof(uint8_t) * length));
}

/*
 * Internal function to give access to the channel status for each channel
 */
mavlink_status_t* mavlink_get_channel_status(uint8_t channel)
{
	static mavlink_status_t m_mavlink_status[MAVLINK_COMM_NUM_BUFFERS];
	return &m_mavlink_status[channel];
}

/*
 * Internal function to give access to the channel buffer for each channel
 */
mavlink_message_t* mavlink_get_channel_buffer(uint8_t channel)
{
	static mavlink_message_t m_mavlink_buffer[MAVLINK_COMM_NUM_BUFFERS];
	return &m_mavlink_buffer[channel];
}

void mavlink_update_system(void)
{
	static bool initialized = false;
	param_t param_system_id;
	param_t param_component_id;
	param_t param_system_type;

	if (!initialized) {
		param_system_id = param_find("MAV_SYS_ID");
		param_component_id = param_find("MAV_COMP_ID");
		param_system_type = param_find("MAV_TYPE");
	}

	/* update system and component id */
	int32_t system_id;
	param_get(param_system_id, &system_id);
	if (system_id > 0 && system_id < 255) {
		mavlink_system.sysid = system_id;
	}

	int32_t component_id;
	param_get(param_component_id, &component_id);
	if (component_id > 0 && component_id < 255) {
		mavlink_system.compid = component_id;
	}
	
	int32_t system_type;
	param_get(param_system_type, &system_type);
	if (system_type >= 0 && system_type < MAV_TYPE_ENUM_END) {
		mavlink_system.type = system_type;
	}
}

void
get_mavlink_mode_and_state(const struct vehicle_control_mode_s *control_mode, const struct actuator_armed_s *armed,
	uint8_t *mavlink_state, uint8_t *mavlink_mode)
{
	/* reset MAVLink mode bitfield */
	*mavlink_mode = 0;

	/* set mode flags independent of system state */
	if (control_mode->flag_control_manual_enabled) {
		*mavlink_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED;
	}

	if (control_mode->flag_system_hil_enabled) {
		*mavlink_mode |= MAV_MODE_FLAG_HIL_ENABLED;
	}

	/* set arming state */
	if (armed->armed) {
		*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED;
	} else {
		*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED;
	}

	if (control_mode->flag_control_velocity_enabled) {
		*mavlink_mode |= MAV_MODE_FLAG_GUIDED_ENABLED;
	} else {
		*mavlink_mode &= ~MAV_MODE_FLAG_GUIDED_ENABLED;
	}

//	switch (v_status->state_machine) {
//	case SYSTEM_STATE_PREFLIGHT:
//		if (v_status->flag_preflight_gyro_calibration ||
//		    v_status->flag_preflight_mag_calibration ||
//		    v_status->flag_preflight_accel_calibration) {
//			*mavlink_state = MAV_STATE_CALIBRATING;
//		} else {
//			*mavlink_state = MAV_STATE_UNINIT;
//		}
//		break;
//
//	case SYSTEM_STATE_STANDBY:
//		*mavlink_state = MAV_STATE_STANDBY;
//		break;
//
//	case SYSTEM_STATE_GROUND_READY:
//		*mavlink_state = MAV_STATE_ACTIVE;
//		break;
//
//	case SYSTEM_STATE_MANUAL:
//		*mavlink_state = MAV_STATE_ACTIVE;
//		*mavlink_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED;
//		break;
//
//	case SYSTEM_STATE_STABILIZED:
//		*mavlink_state = MAV_STATE_ACTIVE;
//		*mavlink_mode |= MAV_MODE_FLAG_STABILIZE_ENABLED;
//		break;
//
//	case SYSTEM_STATE_AUTO:
//		*mavlink_state = MAV_STATE_ACTIVE;
//		*mavlink_mode |= MAV_MODE_FLAG_GUIDED_ENABLED;
//		break;
//
//	case SYSTEM_STATE_MISSION_ABORT:
//		*mavlink_state = MAV_STATE_EMERGENCY;
//		break;
//
//	case SYSTEM_STATE_EMCY_LANDING:
//		*mavlink_state = MAV_STATE_EMERGENCY;
//		break;
//
//	case SYSTEM_STATE_EMCY_CUTOFF:
//		*mavlink_state = MAV_STATE_EMERGENCY;
//		break;
//
//	case SYSTEM_STATE_GROUND_ERROR:
//		*mavlink_state = MAV_STATE_EMERGENCY;
//		break;
//
//	case SYSTEM_STATE_REBOOT:
//		*mavlink_state = MAV_STATE_POWEROFF;
//		break;
//	}

}

/**
 * MAVLink Protocol main function.
 */
int mavlink_thread_main(int argc, char *argv[])
{
	int ch;
	char *device_name = "/dev/ttyS1";
	baudrate = 57600;

	/* XXX this is never written? */
	struct vehicle_status_s v_status;
	struct vehicle_control_mode_s control_mode;
	struct actuator_armed_s armed;

	/* work around some stupidity in task_create's argv handling */
	argc -= 2;
	argv += 2;

	while ((ch = getopt(argc, argv, "b:d:eo")) != EOF) {
		switch (ch) {
		case 'b':
			baudrate = strtoul(optarg, NULL, 10);
			if (baudrate == 0)
				errx(1, "invalid baud rate '%s'", optarg);
			break;

		case 'd':
			device_name = optarg;
			break;

		case 'e':
			mavlink_link_termination_allowed = true;
			break;

		case 'o':
			mavlink_link_mode = MAVLINK_INTERFACE_MODE_ONBOARD;
			break;

		default:
			usage();
		}
	}

	struct termios uart_config_original;
	bool usb_uart;

	/* print welcome text */
	warnx("MAVLink v1.0 serial interface starting...");

	/* inform about mode */
	warnx((mavlink_link_mode == MAVLINK_INTERFACE_MODE_ONBOARD) ? "ONBOARD MODE" : "DOWNLINK MODE");

	/* Flush stdout in case MAVLink is about to take it over */
	fflush(stdout);

	/* default values for arguments */
	uart = mavlink_open_uart(baudrate, device_name, &uart_config_original, &usb_uart);
	if (uart < 0)
		err(1, "could not open %s", device_name);

	/* Initialize system properties */
	mavlink_update_system();

	/* start the MAVLink receiver */
	receive_thread = receive_start(uart);

	thread_running = true;

	/* arm counter to go off immediately */
	unsigned lowspeed_counter = 10;

	while (!thread_should_exit) {

		/* 1 Hz */
		if (lowspeed_counter == 10) {
			mavlink_update_system();

			/* translate the current system state to mavlink state and mode */
			uint8_t mavlink_state = 0;
			uint8_t mavlink_mode = 0;
			get_mavlink_mode_and_state(&control_mode, &armed, &mavlink_state, &mavlink_mode);

			/* send heartbeat */
			mavlink_msg_heartbeat_send(chan, mavlink_system.type, MAV_AUTOPILOT_PX4, mavlink_mode, v_status.navigation_state, mavlink_state);

			/* send status (values already copied in the section above) */
			mavlink_msg_sys_status_send(chan,
						    v_status.onboard_control_sensors_present,
						    v_status.onboard_control_sensors_enabled,
						    v_status.onboard_control_sensors_health,
						    v_status.load * 1000.0f,
						    v_status.battery_voltage * 1000.0f,
						    v_status.battery_current * 1000.0f,
						    v_status.battery_remaining,
						    v_status.drop_rate_comm,
						    v_status.errors_comm,
						    v_status.errors_count1,
						    v_status.errors_count2,
						    v_status.errors_count3,
						    v_status.errors_count4);
			lowspeed_counter = 0;
		}
		lowspeed_counter++;

		/* sleep 1000 ms */
		usleep(1000000);
	}

	/* wait for threads to complete */
	pthread_join(receive_thread, NULL);

	/* Reset the UART flags to original state */
	if (!usb_uart)
		tcsetattr(uart, TCSANOW, &uart_config_original);

	thread_running = false;

	exit(0);
}

static void
usage()
{
	fprintf(stderr, "usage: mavlink_onboard start [-d <devicename>] [-b <baud rate>]\n"
			"       mavlink_onboard stop\n"
			"       mavlink_onboard status\n");
	exit(1);
}

int mavlink_onboard_main(int argc, char *argv[])
{

	if (argc < 2) {
		warnx("missing command");
		usage();
	}

	if (!strcmp(argv[1], "start")) {

		/* this is not an error */
		if (thread_running)
			errx(0, "already running");

		thread_should_exit = false;
		mavlink_task = task_spawn_cmd("mavlink_onboard",
					  SCHED_DEFAULT,
					  SCHED_PRIORITY_DEFAULT,
					  2048,
					  mavlink_thread_main,
					  (const char**)argv);
		exit(0);
	}

	if (!strcmp(argv[1], "stop")) {
		thread_should_exit = true;
		while (thread_running) {
			usleep(200000);
		}
		warnx("terminated");
		exit(0);
	}

	if (!strcmp(argv[1], "status")) {
		if (thread_running) {
			errx(0, "running");
		} else {
			errx(1, "not running");
		}
	}

	warnx("unrecognized command");
	usage();
	/* not getting here */
	return 0;
}