blob: b7a0bbbccb781d2551e29cdbcea10eb817312429 (
plain) (
tree)
|
|
#include "BlockSegwayController.hpp"
void BlockSegwayController::update() {
// wait for a sensor update, check for exit condition every 100 ms
if (poll(&_attPoll, 1, 100) < 0) return; // poll error
uint64_t newTimeStamp = hrt_absolute_time();
float dt = (newTimeStamp - _timeStamp) / 1.0e6f;
_timeStamp = newTimeStamp;
// check for sane values of dt
// to prevent large control responses
if (dt > 1.0f || dt < 0) return;
// set dt for all child blocks
setDt(dt);
// check for new updates
if (_param_update.updated()) updateParams();
// get new information from subscriptions
updateSubscriptions();
// default all output to zero unless handled by mode
for (unsigned i = 2; i < NUM_ACTUATOR_CONTROLS; i++)
_actuators.control[i] = 0.0f;
// only update guidance in auto mode
if (_status.state_machine == SYSTEM_STATE_AUTO) {
// update guidance
}
// XXX handle STABILIZED (loiter on spot) as well
// once the system switches from manual or auto to stabilized
// the setpoint should update to loitering around this position
// handle autopilot modes
if (_status.state_machine == SYSTEM_STATE_AUTO ||
_status.state_machine == SYSTEM_STATE_STABILIZED) {
float spdCmd = phi2spd.update(_att.phi);
// output
_actuators.control[0] = spdCmd;
_actuators.control[1] = spdCmd;
} else if (_status.state_machine == SYSTEM_STATE_MANUAL) {
_actuators.control[0] = _manual.roll;
_actuators.control[1] = _manual.roll;
}
// update all publications
updatePublications();
}
|