/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file mixer.h
*
* Generic, programmable, procedural control signal mixers.
*
* This library implements a generic mixer interface that can be used
* by any driver or subsytem that wants to combine several control signals
* into a single output.
*
* Terminology
* ===========
*
* control value
* A mixer input value, typically provided by some controlling
* component of the system.
*
* control group
* A collection of controls provided by a single controlling component.
*
* actuator
* The mixer output value.
*
*
* Mixing basics
* =============
*
* An actuator derives its value from the combination of one or more
* control values. Each of the control values is scaled according to
* the actuator's configuration and then combined to produce the
* actuator value, which may then be further scaled to suit the specific
* output type.
*
* Internally, all scaling is performed using floating point values.
* Inputs and outputs are clamped to the range -1.0 to 1.0.
*
* control control control
* | | |
* v v v
* scale scale scale
* | | |
* | v |
* +-------> mix <------+
* |
* scale
* |
* v
* out
*
* Scaling
* -------
*
* Each scaler allows the input value to be scaled independently for
* inputs greater/less than zero. An offset can be applied to the output,
* as well as lower and upper boundary constraints.
* Negative scaling factors cause the output to be inverted (negative input
* produces positive output).
*
* Scaler pseudocode:
*
* if (input < 0)
* output = (input * NEGATIVE_SCALE) + OFFSET
* else
* output = (input * POSITIVE_SCALE) + OFFSET
*
* if (output < LOWER_LIMIT)
* output = LOWER_LIMIT
* if (output > UPPER_LIMIT)
* output = UPPER_LIMIT
*
*
* Mixing
* ------
*
* Mixing behaviour varies based on the specific mixer class; each
* mixer class describes its behaviour in more detail.
*
*
* Controls
* --------
*
* The precise assignment of controls may vary depending on the
* application, but the following assignments should be used
* when appropriate. Some mixer classes have specific assumptions
* about the assignment of controls.
*
* control | standard meaning
* --------+-----------------------
* 0 | roll
* 1 | pitch
* 2 | yaw
* 3 | primary thrust
*/
#ifndef _SYSTEMLIB_MIXER_MIXER_H
#define _SYSTEMLIB_MIXER_MIXER_H value
#include <nuttx/config.h>
#include "drivers/drv_mixer.h"
#include <uORB/topics/multirotor_motor_limits.h>
#include "mixer_load.h"
/**
* Abstract class defining a mixer mixing zero or more inputs to
* one or more outputs.
*/
class __EXPORT Mixer
{
public:
/** next mixer in a list */
Mixer *_next;
/**
* Fetch a control value.
*
* @param handle Token passed when the callback is registered.
* @param control_group The group to fetch the control from.
* @param control_index The group-relative index to fetch the control from.
* @param control The returned control
* @return Zero if the value was fetched, nonzero otherwise.
*/
typedef int (* ControlCallback)(uintptr_t handle,
uint8_t control_group,
uint8_t control_index,
float &control);
/**
* Constructor.
*
* @param control_cb Callback invoked when reading controls.
*/
Mixer(ControlCallback control_cb, uintptr_t cb_handle);
virtual ~Mixer() {};
/**
* Perform the mixing function.
*
* @param outputs Array into which mixed output(s) should be placed.
* @param space The number of available entries in the output array;
* @return The number of entries in the output array that were populated.
*/
virtual unsigned mix(float *outputs, unsigned space) = 0;
/**
* Analyses the mix configuration and updates a bitmask of groups
* that are required.
*
* @param groups A bitmask of groups (0-31) that the mixer requires.
*/
virtual void groups_required(uint32_t &groups) = 0;
protected:
/** client-supplied callback used when fetching control values */
ControlCallback _control_cb;
uintptr_t _cb_handle;
/**
* Invoke the client callback to fetch a control value.
*
* @param group Control group to fetch from.
* @param index Control index to fetch.
* @return The control value.
*/
float get_control(uint8_t group, uint8_t index);
/**
* Perform simpler linear scaling.
*
* @param scaler The scaler configuration.
* @param input The value to be scaled.
* @return The scaled value.
*/
static float scale(const mixer_scaler_s &scaler, float input);
/**
* Validate a scaler
*
* @param scaler The scaler to be validated.
* @return Zero if good, nonzero otherwise.
*/
static int scale_check(struct mixer_scaler_s &scaler);
/**
* Find a tag
*
* @param buf The buffer to operate on.
* @param buflen length of the buffer.
* @param tag character to search for.
*/
static const char * findtag(const char *buf, unsigned &buflen, char tag);
/**
* Skip a line
*
* @param buf The buffer to operate on.
* @param buflen length of the buffer.
* @return 0 / OK if a line could be skipped, 1 else
*/
static const char * skipline(const char *buf, unsigned &buflen);
private:
/* do not allow to copy due to prt data members */
Mixer(const Mixer&);
Mixer& operator=(const Mixer&);
};
/**
* Group of mixers, built up from single mixers and processed
* in order when mixing.
*/
class __EXPORT MixerGroup : public Mixer
{
public:
MixerGroup(ControlCallback control_cb, uintptr_t cb_handle);
~MixerGroup();
virtual unsigned mix(float *outputs, unsigned space);
virtual void groups_required(uint32_t &groups);
/**
* Add a mixer to the group.
*
* @param mixer The mixer to be added.
*/
void add_mixer(Mixer *mixer);
/**
* Remove all the mixers from the group.
*/
void reset();
/**
* Count the mixers in the group.
*/
unsigned count();
/**
* Adds mixers to the group based on a text description in a buffer.
*
* Mixer definitions begin with a single capital letter and a colon.
* The actual format of the mixer definition varies with the individual
* mixers; they are summarised here, but see ROMFS/mixers/README for
* more details.
*
* Null Mixer
* ..........
*
* The null mixer definition has the form:
*
* Z:
*
* Simple Mixer
* ............
*
* A simple mixer definition begins with:
*
* M: <control count>
* O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
*
* The definition continues with <control count> entries describing the control
* inputs and their scaling, in the form:
*
* S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
*
* Multirotor Mixer
* ................
*
* The multirotor mixer definition is a single line of the form:
*
* R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband>
*
* @param buf The mixer configuration buffer.
* @param buflen The length of the buffer, updated to reflect
* bytes as they are consumed.
* @return Zero on successful load, nonzero otherwise.
*/
int load_from_buf(const char *buf, unsigned &buflen);
private:
Mixer *_first; /**< linked list of mixers */
/* do not allow to copy due to pointer data members */
MixerGroup(const MixerGroup&);
MixerGroup operator=(const MixerGroup&);
};
/**
* Null mixer; returns zero.
*
* Used as a placeholder for output channels that are unassigned in groups.
*/
class __EXPORT NullMixer : public Mixer
{
public:
NullMixer();
~NullMixer() {};
/**
* Factory method.
*
* Given a pointer to a buffer containing a text description of the mixer,
* returns a pointer to a new instance of the mixer.
*
* @param buf Buffer containing a text description of
* the mixer.
* @param buflen Length of the buffer in bytes, adjusted
* to reflect the bytes consumed.
* @return A new NullMixer instance, or nullptr
* if the text format is bad.
*/
static NullMixer *from_text(const char *buf, unsigned &buflen);
virtual unsigned mix(float *outputs, unsigned space);
virtual void groups_required(uint32_t &groups);
};
/**
* Simple summing mixer.
*
* Collects zero or more inputs and mixes them to a single output.
*/
class __EXPORT SimpleMixer : public Mixer
{
public:
/**
* Constructor
*
* @param mixinfo Mixer configuration. The pointer passed
* becomes the property of the mixer and
* will be freed when the mixer is deleted.
*/
SimpleMixer(ControlCallback control_cb,
uintptr_t cb_handle,
mixer_simple_s *mixinfo);
~SimpleMixer();
/**
* Factory method with full external configuration.
*
* Given a pointer to a buffer containing a text description of the mixer,
* returns a pointer to a new instance of the mixer.
*
* @param control_cb The callback to invoke when fetching a
* control value.
* @param cb_handle Handle passed to the control callback.
* @param buf Buffer containing a text description of
* the mixer.
* @param buflen Length of the buffer in bytes, adjusted
* to reflect the bytes consumed.
* @return A new SimpleMixer instance, or nullptr
* if the text format is bad.
*/
static SimpleMixer *from_text(Mixer::ControlCallback control_cb,
uintptr_t cb_handle,
const char *buf,
unsigned &buflen);
/**
* Factory method for PWM/PPM input to internal float representation.
*
* @param control_cb The callback to invoke when fetching a
* control value.
* @param cb_handle Handle passed to the control callback.
* @param input The control index used when fetching the input.
* @param min The PWM/PPM value considered to be "minimum" (gives -1.0 out)
* @param mid The PWM/PPM value considered to be the midpoint (gives 0.0 out)
* @param max The PWM/PPM value considered to be "maximum" (gives 1.0 out)
* @return A new SimpleMixer instance, or nullptr if one could not be
* allocated.
*/
static SimpleMixer *pwm_input(Mixer::ControlCallback control_cb,
uintptr_t cb_handle,
unsigned input,
uint16_t min,
uint16_t mid,
uint16_t max);
virtual unsigned mix(float *outputs, unsigned space);
virtual void groups_required(uint32_t &groups);
/**
* Check that the mixer configuration as loaded is sensible.
*
* Note that this function will call control_cb, but only cares about
* error returns, not the input value.
*
* @return Zero if the mixer makes sense, nonzero otherwise.
*/
int check();
protected:
private:
mixer_simple_s *_info;
static int parse_output_scaler(const char *buf, unsigned &buflen, mixer_scaler_s &scaler);
static int parse_control_scaler(const char *buf,
unsigned &buflen,
mixer_scaler_s &scaler,
uint8_t &control_group,
uint8_t &control_index);
/* do not allow to copy due to ptr data members */
SimpleMixer(const SimpleMixer&);
SimpleMixer operator=(const SimpleMixer&);
};
/**
* Supported multirotor geometries.
*
* Values are generated by the multi_tables script and placed to mixer_multirotor.generated.h
*/
typedef unsigned int MultirotorGeometryUnderlyingType;
enum class MultirotorGeometry : MultirotorGeometryUnderlyingType;
/**
* Multi-rotor mixer for pre-defined vehicle geometries.
*
* Collects four inputs (roll, pitch, yaw, thrust) and mixes them to
* a set of outputs based on the configured geometry.
*/
class __EXPORT MultirotorMixer : public Mixer
{
public:
/**
* Precalculated rotor mix.
*/
struct Rotor {
float roll_scale; /**< scales roll for this rotor */
float pitch_scale; /**< scales pitch for this rotor */
float yaw_scale; /**< scales yaw for this rotor */
};
/**
* Constructor.
*
* @param control_cb Callback invoked to read inputs.
* @param cb_handle Passed to control_cb.
* @param geometry The selected geometry.
* @param roll_scale Scaling factor applied to roll inputs
* compared to thrust.
* @param pitch_scale Scaling factor applied to pitch inputs
* compared to thrust.
* @param yaw_wcale Scaling factor applied to yaw inputs compared
* to thrust.
* @param deadband Minumum rotor control output value; usually
* tuned to ensure that rotors never stall at the
* low end of their control range.
*/
MultirotorMixer(ControlCallback control_cb,
uintptr_t cb_handle,
MultirotorGeometry geometry,
float roll_scale,
float pitch_scale,
float yaw_scale,
float deadband);
~MultirotorMixer();
/**
* Factory method.
*
* Given a pointer to a buffer containing a text description of the mixer,
* returns a pointer to a new instance of the mixer.
*
* @param control_cb The callback to invoke when fetching a
* control value.
* @param cb_handle Handle passed to the control callback.
* @param buf Buffer containing a text description of
* the mixer.
* @param buflen Length of the buffer in bytes, adjusted
* to reflect the bytes consumed.
* @return A new MultirotorMixer instance, or nullptr
* if the text format is bad.
*/
static MultirotorMixer *from_text(Mixer::ControlCallback control_cb,
uintptr_t cb_handle,
const char *buf,
unsigned &buflen);
virtual unsigned mix(float *outputs, unsigned space);
virtual void groups_required(uint32_t &groups);
private:
float _roll_scale;
float _pitch_scale;
float _yaw_scale;
float _idle_speed;
orb_advert_t _limits_pub;
multirotor_motor_limits_s _limits;
unsigned _rotor_count;
const Rotor *_rotors;
/* do not allow to copy due to ptr data members */
MultirotorMixer(const MultirotorMixer&);
MultirotorMixer operator=(const MultirotorMixer&);
};
#endif