diff options
author | Holger Steinhaus <hsteinhaus@gmx.de> | 2014-03-25 15:42:44 +0100 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-04-05 11:05:17 +0200 |
commit | 745ef4f4856af60aca5625860e5e3f25ea189dc9 (patch) | |
tree | fb039bd3efb7c691938740ab52c8ef52a9c11664 | |
parent | 5e0d687b566022c12270f68facbf7ca35f62306c (diff) | |
download | px4-firmware-745ef4f4856af60aca5625860e5e3f25ea189dc9.tar.gz px4-firmware-745ef4f4856af60aca5625860e5e3f25ea189dc9.tar.bz2 px4-firmware-745ef4f4856af60aca5625860e5e3f25ea189dc9.zip |
px4io: do not include failsafe condition into rc_lost flag
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 158 |
1 files changed, 77 insertions, 81 deletions
diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 941500f0d..609dd3312 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -201,94 +201,90 @@ controls_tick() { /* update RC-received timestamp */ system_state.rc_channels_timestamp_received = hrt_absolute_time(); - /* do not command anything in failsafe, kick in the RC loss counter */ - if (!(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { - - /* update RC-received timestamp */ - system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received; - - /* map raw inputs to mapped inputs */ - /* XXX mapping should be atomic relative to protocol */ - for (unsigned i = 0; i < r_raw_rc_count; i++) { - - /* map the input channel */ - uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; - - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { - - uint16_t raw = r_raw_rc_values[i]; - - int16_t scaled; - - /* - * 1) Constrain to min/max values, as later processing depends on bounds. - */ - if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) - raw = conf[PX4IO_P_RC_CONFIG_MIN]; - if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) - raw = conf[PX4IO_P_RC_CONFIG_MAX]; - - /* - * 2) Scale around the mid point differently for lower and upper range. - * - * This is necessary as they don't share the same endpoints and slope. - * - * First normalize to 0..1 range with correct sign (below or above center), - * then scale to 20000 range (if center is an actual center, -10000..10000, - * if parameters only support half range, scale to 10000 range, e.g. if - * center == min 0..10000, if center == max -10000..0). - * - * As the min and max bounds were enforced in step 1), division by zero - * cannot occur, as for the case of center == min or center == max the if - * statement is mutually exclusive with the arithmetic NaN case. - * - * DO NOT REMOVE OR ALTER STEP 1! - */ - if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); - - } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); - - } else { - /* in the configured dead zone, output zero */ - scaled = 0; - } - - /* invert channel if requested */ - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) - scaled = -scaled; + /* update RC-received timestamp */ + system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received; + + /* map raw inputs to mapped inputs */ + /* XXX mapping should be atomic relative to protocol */ + for (unsigned i = 0; i < r_raw_rc_count; i++) { + + /* map the input channel */ + uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; + + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { + + uint16_t raw = r_raw_rc_values[i]; + + int16_t scaled; + + /* + * 1) Constrain to min/max values, as later processing depends on bounds. + */ + if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) + raw = conf[PX4IO_P_RC_CONFIG_MIN]; + if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) + raw = conf[PX4IO_P_RC_CONFIG_MAX]; + + /* + * 2) Scale around the mid point differently for lower and upper range. + * + * This is necessary as they don't share the same endpoints and slope. + * + * First normalize to 0..1 range with correct sign (below or above center), + * then scale to 20000 range (if center is an actual center, -10000..10000, + * if parameters only support half range, scale to 10000 range, e.g. if + * center == min 0..10000, if center == max -10000..0). + * + * As the min and max bounds were enforced in step 1), division by zero + * cannot occur, as for the case of center == min or center == max the if + * statement is mutually exclusive with the arithmetic NaN case. + * + * DO NOT REMOVE OR ALTER STEP 1! + */ + if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); + + } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); + + } else { + /* in the configured dead zone, output zero */ + scaled = 0; + } - /* and update the scaled/mapped version */ - unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - if (mapped < PX4IO_CONTROL_CHANNELS) { + /* invert channel if requested */ + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) + scaled = -scaled; - /* invert channel if pitch - pulling the lever down means pitching up by convention */ - if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ - scaled = -scaled; + /* and update the scaled/mapped version */ + unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; + if (mapped < PX4IO_CONTROL_CHANNELS) { - r_rc_values[mapped] = SIGNED_TO_REG(scaled); - assigned_channels |= (1 << mapped); + /* invert channel if pitch - pulling the lever down means pitching up by convention */ + if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ + scaled = -scaled; + + r_rc_values[mapped] = SIGNED_TO_REG(scaled); + assigned_channels |= (1 << mapped); - } } } + } - /* set un-assigned controls to zero */ - for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { - if (!(assigned_channels & (1 << i))) - r_rc_values[i] = 0; - } + /* set un-assigned controls to zero */ + for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { + if (!(assigned_channels & (1 << i))) + r_rc_values[i] = 0; + } - /* set RC OK flag, as we got an update */ - r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; + /* set RC OK flag, as we got an update */ + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; - /* if we have enough channels (5) to control the vehicle, the mapping is ok */ - if (assigned_channels > 4) { - r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK; - } else { - r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK); - } + /* if we have enough channels (5) to control the vehicle, the mapping is ok */ + if (assigned_channels > 4) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK); } /* @@ -316,8 +312,8 @@ controls_tick() { * Handle losing RC input */ - /* this kicks in if the receiver is gone or the system went to failsafe */ - if (rc_input_lost || (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { + /* this kicks in if the receiver is gone, but there is not on failsafe (indicated by separate flag) */ + if (rc_input_lost) { /* Clear the RC input status flag, clear manual override flag */ r_status_flags &= ~( PX4IO_P_STATUS_FLAGS_OVERRIDE | |