diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-27 19:17:56 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-27 19:17:56 +0000 |
commit | b4db7635d85361c3cb8a718d5f460000b7123fb3 (patch) | |
tree | 5ca1c52a94dad3a4051fa21fe15a58f02a7b727d | |
parent | e96d8f046b6bce6c4e810b302c1cc1cc578bdae3 (diff) | |
download | px4-firmware-b4db7635d85361c3cb8a718d5f460000b7123fb3.tar.gz px4-firmware-b4db7635d85361c3cb8a718d5f460000b7123fb3.tar.bz2 px4-firmware-b4db7635d85361c3cb8a718d5f460000b7123fb3.zip |
Add configs/stm32f4discovery/usbnsh
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5572 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | nuttx/ChangeLog | 3 | ||||
-rw-r--r-- | nuttx/configs/stm32f4discovery/README.txt | 50 | ||||
-rw-r--r-- | nuttx/configs/stm32f4discovery/usbnsh/Make.defs | 111 | ||||
-rw-r--r-- | nuttx/configs/stm32f4discovery/usbnsh/defconfig | 738 | ||||
-rwxr-xr-x | nuttx/configs/stm32f4discovery/usbnsh/setenv.sh | 75 | ||||
-rw-r--r-- | nuttx/drivers/usbdev/Kconfig | 18 | ||||
-rw-r--r-- | nuttx/fs/Kconfig | 23 | ||||
-rw-r--r-- | nuttx/fs/fs_syslog.c | 2 | ||||
-rw-r--r-- | nuttx/libc/stdio/lib_lowprintf.c | 2 | ||||
-rw-r--r-- | nuttx/libc/stdio/lib_rawprintf.c | 3 | ||||
-rw-r--r-- | nuttx/sched/os_start.c | 23 | ||||
-rw-r--r-- | nuttx/sched/task_vfork.c | 1 |
12 files changed, 1029 insertions, 20 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 32112f358..76ed2b603 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -4045,4 +4045,7 @@ is started. This can be used to schedule C++ constructors to run automatically in the context of the new task. * binfmt/binfmt_execmodule: Execute constructors as a start hook. + * sched/os_start.c: Fix ordering of group initialization. + * configs/stm32f4discovery/usbnsh: Add an NSH STM32F4Discovery + configuration that uses USB CDC/ACM for the NSH console. diff --git a/nuttx/configs/stm32f4discovery/README.txt b/nuttx/configs/stm32f4discovery/README.txt index 39fb41d78..0e295c429 100644 --- a/nuttx/configs/stm32f4discovery/README.txt +++ b/nuttx/configs/stm32f4discovery/README.txt @@ -1473,6 +1473,56 @@ Where <subdir> is one of the following: 3. By default, this project assumes that you are *NOT* using the DFU bootloader. + usbnsh: + ------- + + This is another NSH example. If differs from other 'nsh' configurations + in that this configurations uses a USB serial device for console I/O. + Such a configuration is useful on the stm32f4discovery which has no + builtin RS-232 drivers. + + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. By default, this configuration uses the CodeSourcery toolchain + for Windows and builds under Cygwin (or probably MSYS). That + can easily be reconfigured, of course. + + CONFIG_HOST_WINDOWS=y : Builds under Windows + CONFIG_WINDOWS_CYGWIN=y : Using Cygwin + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows + + 3. This configuration does have UART2 output enabled and set up as + the system logging device: + + CONFIG_SYSLOG=y : Enable output to syslog, not console + CONFIG_SYSLOG_CHAR=y : Use a character device for system logging + CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART2 will be /dev/ttyS0 + + Debug, however, is not enable so in the default configuration nothing + should appear on UART2 unless you enable some debug output. + + 4. By default, this project assumes that you are *NOT* using the DFU + bootloader. + + Using the Prolifics PL2303 Emulation + ------------------------------------ + You could also use the non-standard PL2303 serial device instead of + the standard CDC/ACM serial device by changing: + + CONFIG_CDCACM=y : Disable the CDC/ACM serial device class + CONFIG_CDCACM_CONSOLE=y : The CDC/ACM serial device is NOT the console + CONFIG_PL2303=y : The Prolifics PL2303 emulation is enabled + CONFIG_PL2303_CONSOLE=y : The PL2303 serial device is the console + winbuild: -------- diff --git a/nuttx/configs/stm32f4discovery/usbnsh/Make.defs b/nuttx/configs/stm32f4discovery/usbnsh/Make.defs new file mode 100644 index 000000000..0bea20b8a --- /dev/null +++ b/nuttx/configs/stm32f4discovery/usbnsh/Make.defs @@ -0,0 +1,111 @@ +############################################################################ +# configs/stm32f4discovery/usbnsh/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx/configs/stm32f4discovery/usbnsh/defconfig b/nuttx/configs/stm32f4discovery/usbnsh/defconfig new file mode 100644 index 000000000..3ddcab424 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/usbnsh/defconfig @@ -0,0 +1,738 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F103RET6 is not set +# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set +# CONFIG_ARCH_CHIP_STM32F103VET6 is not set +# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set +# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +CONFIG_ARCH_CHIP_STM32F407VG=y +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +CONFIG_STM32_STM32F40XX=y +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKPSRAM is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CCMDATARAM is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_I2C3 is not set +# CONFIG_STM32_IWDG is not set +CONFIG_STM32_OTGFS=y +# CONFIG_STM32_OTGHS is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set +CONFIG_STM32_SPI1=y +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +CONFIG_STM32_SYSCFG=y +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +# CONFIG_STM32_TIM9 is not set +# CONFIG_STM32_TIM10 is not set +# CONFIG_STM32_TIM11 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_USART1 is not set +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USART6 is not set +# CONFIG_STM32_WWDG is not set +CONFIG_STM32_SPI=y + +# +# Alternate Pin Mapping +# +# CONFIG_STM32_FLASH_PREFETCH is not set +# CONFIG_STM32_JTAG_DISABLE is not set +# CONFIG_STM32_JTAG_FULL_ENABLE is not set +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +CONFIG_STM32_JTAG_SW_ENABLE=y +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32_CCMEXCLUDE is not set +CONFIG_STM32_USART=y + +# +# U[S]ART Configuration +# +# CONFIG_USART2_RS485 is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set + +# +# SPI Configuration +# +# CONFIG_STM32_SPI_INTERRUPTS is not set +# CONFIG_STM32_SPI_DMA is not set + +# +# USB Host Configuration +# + +# +# External Memory Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set + +# +# Board Settings +# +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=114688 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32f4discovery" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2013 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=27 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=2048 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_ARCH_HAVE_I2CRESET=y +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_USART2=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_USART2_SERIAL_CONSOLE is not set +CONFIG_NO_SERIAL_CONSOLE=y + +# +# USART2 Configuration +# +CONFIG_USART2_RXBUFSIZE=256 +CONFIG_USART2_TXBUFSIZE=256 +CONFIG_USART2_BAUD=115200 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 +CONFIG_USBDEV=y + +# +# Device Controller Driver Options +# +# CONFIG_USBDEV_ISOCHRONOUS is not set +# CONFIG_USBDEV_DUALSPEED is not set +CONFIG_USBDEV_SELFPOWERED=y +# CONFIG_USBDEV_BUSPOWERED is not set +# CONFIG_USBDEV_DMA is not set +# CONFIG_USBDEV_TRACE is not set +# CONFIG_USBDEV_COMPOSITE is not set +# CONFIG_PL2303 is not set +CONFIG_CDCACM=y +CONFIG_CDCACM_CONSOLE=y +CONFIG_CDCACM_EP0MAXPACKET=64 +CONFIG_CDCACM_EPINTIN=2 +CONFIG_CDCACM_EPINTIN_FSSIZE=64 +CONFIG_CDCACM_EPINTIN_HSSIZE=64 +CONFIG_CDCACM_EPBULKOUT=0 +CONFIG_CDCACM_EPBULKOUT_FSSIZE=64 +CONFIG_CDCACM_EPBULKOUT_HSSIZE=512 +CONFIG_CDCACM_EPBULKIN=0 +CONFIG_CDCACM_EPBULKIN_FSSIZE=64 +CONFIG_CDCACM_EPBULKIN_HSSIZE=512 +CONFIG_CDCACM_NWRREQS=4 +CONFIG_CDCACM_NRDREQS=4 +CONFIG_CDCACM_RXBUFSIZE=256 +# CONFIG_CDCACM_TXBUFSIZE is not set +CONFIG_CDCACM_VENDORID=0x0525 +CONFIG_CDCACM_PRODUCTID=0xa4a7 +CONFIG_CDCACM_VENDORSTR="NuttX" +CONFIG_CDCACM_PRODUCTSTR="USBdev Serial" +# CONFIG_USBMSC is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_BINFS is not set + +# +# System Logging +# +CONFIG_SYSLOG=y +CONFIG_SYSLOG_CHAR=y +CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Helper Functions +# +# CONFIG_LIB_KBDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Interpreters +# + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_USBCONSOLE is not set +# CONFIG_NSH_CONDEV is not set +CONFIG_NSH_ARCHINIT=y + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh b/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh new file mode 100755 index 000000000..a56f85d35 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh @@ -0,0 +1,75 @@ +#!/bin/bash +# configs/stm32f4discovery/usbnsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx/drivers/usbdev/Kconfig b/nuttx/drivers/usbdev/Kconfig index 70c7a04f0..6fa4124be 100644 --- a/nuttx/drivers/usbdev/Kconfig +++ b/nuttx/drivers/usbdev/Kconfig @@ -154,6 +154,14 @@ menuconfig PL2303 This logic emulates the Prolific PL2303 serial/USB converter if PL2303 + +config PL2303_CONSOLE + bool "PL2303 console device" + default n + ---help--- + Register the USB device as /dev/console so that is will be used + as the console device. + config PL2303_EPINTIN int "Logical endpoint numbers" default 1 @@ -218,8 +226,16 @@ menuconfig CDCACM Enables USB Modem (CDC ACM) support if CDCACM + +config CDCACM_CONSOLE + bool "CDC/ACM console device" + default n + ---help--- + Register the USB device as /dev/console so that is will be used + as the console device. + config CDCACM_COMPOSITE - bool "CDCACM composite support" + bool "CDC/ACM composite support" default n depends on USBDEV_COMPOSITE ---help--- diff --git a/nuttx/fs/Kconfig b/nuttx/fs/Kconfig index ab03a2b64..e6647f516 100644 --- a/nuttx/fs/Kconfig +++ b/nuttx/fs/Kconfig @@ -24,23 +24,26 @@ config SYSLOG ---help--- Enables generic system logging features. -config SYSLOG_DEVPATH - string "System log device" - default "/dev/syslog" - depends on SYSLOG - ---help--- - The full path to the system logging device. For the RAMLOG SYSLOG device, - this is normally "/dev/ramlog". For character SYSLOG devices, it should be - some other existing character device (or file) supported by the configuration - (such as "/dev/ttyS1")/ +if SYSLOG config SYSLOG_CHAR bool "System log character device support" default y - depends on SYSLOG ---help--- Enable the generic character device for the SYSLOG. The full path to the SYSLOG device is provided by SYSLOG_DEVPATH. A valid character device (or file) must exist at this path. It will by opened by syslog_initialize. Do not enable more than one SYSLOG device. + +config SYSLOG_DEVPATH + string "System log device" + default "/dev/syslog" + depends on SYSLOG_CHAR + ---help--- + The full path to the system logging device. For the RAMLOG SYSLOG device, + this is normally "/dev/ramlog". For character SYSLOG devices, it should be + some other existing character device (or file) supported by the configuration + (such as "/dev/ttyS1")/ + +endif diff --git a/nuttx/fs/fs_syslog.c b/nuttx/fs/fs_syslog.c index 1d569082a..f348bdb03 100644 --- a/nuttx/fs/fs_syslog.c +++ b/nuttx/fs/fs_syslog.c @@ -265,7 +265,7 @@ int syslog_initialize(void) { /* The inode was not found. In this case, we will attempt to re-open * the device repeatedly. The assumption is that the device path is - * value but that the driver has not yet been registered. + * valid but that the driver has not yet been registered. */ g_sysdev.sl_state = SYSLOG_REOPEN; diff --git a/nuttx/libc/stdio/lib_lowprintf.c b/nuttx/libc/stdio/lib_lowprintf.c index f7d4ffe2f..667fad7be 100644 --- a/nuttx/libc/stdio/lib_lowprintf.c +++ b/nuttx/libc/stdio/lib_lowprintf.c @@ -38,8 +38,10 @@ ****************************************************************************/ #include <nuttx/config.h> + #include <stdio.h> #include <debug.h> + #include "lib_internal.h" /* This interface can only be used from within the kernel */ diff --git a/nuttx/libc/stdio/lib_rawprintf.c b/nuttx/libc/stdio/lib_rawprintf.c index 98bbbea05..d8deba12d 100644 --- a/nuttx/libc/stdio/lib_rawprintf.c +++ b/nuttx/libc/stdio/lib_rawprintf.c @@ -37,8 +37,11 @@ * Included Files ****************************************************************************/ +#include <nuttx/config.h> + #include <stdio.h> #include <debug.h> + #include "lib_internal.h" /**************************************************************************** diff --git a/nuttx/sched/os_start.c b/nuttx/sched/os_start.c index 5e6eaa858..c60edc495 100644 --- a/nuttx/sched/os_start.c +++ b/nuttx/sched/os_start.c @@ -327,6 +327,12 @@ void os_start(void) } #endif + /* Allocate the IDLE group and suppress child status. */ + +#ifdef HAVE_TASK_GROUP + (void)group_allocate(&g_idletcb); +#endif + /* Initialize the interrupt handling subsystem (if included) */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS @@ -439,20 +445,21 @@ void os_start(void) lib_initialize(); } - /* Create the IDLE group and suppress child status */ - -#ifdef HAVE_TASK_GROUP - (void)group_allocate(&g_idletcb); - (void)group_initialize(&g_idletcb); - g_idletcb.group->tg_flags = GROUP_FLAG_NOCLDWAIT; -#endif - /* Create stdout, stderr, stdin on the IDLE task. These will be * inherited by all of the threads created by the IDLE task. */ (void)group_setupidlefiles(&g_idletcb); + /* Complete initialization of the IDLE group. Suppress retention + * of child status in the IDLE group. + */ + +#ifdef HAVE_TASK_GROUP + (void)group_initialize(&g_idletcb); + g_idletcb.group->tg_flags = GROUP_FLAG_NOCLDWAIT; +#endif + /* Create initial tasks and bring-up the system */ (void)os_bringup(); diff --git a/nuttx/sched/task_vfork.c b/nuttx/sched/task_vfork.c index 5b42a1e55..ac86ddc56 100644 --- a/nuttx/sched/task_vfork.c +++ b/nuttx/sched/task_vfork.c @@ -39,6 +39,7 @@ #include <nuttx/config.h> +#include <sys/wait.h> #include <stdint.h> #include <assert.h> #include <queue.h> |