diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-30 10:00:01 +0100 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-30 10:00:01 +0100 |
commit | ff753b9e2417f4df5111743274db08c1fa99d020 (patch) | |
tree | 646255b40704641a72343b6758180a3d65921266 | |
parent | 62076c0e81d505544ecddb05b039a4f010200480 (diff) | |
parent | 3b31a6b1b9756eb191eaaafb1c137e6874079281 (diff) | |
download | px4-firmware-ff753b9e2417f4df5111743274db08c1fa99d020.tar.gz px4-firmware-ff753b9e2417f4df5111743274db08c1fa99d020.tar.bz2 px4-firmware-ff753b9e2417f4df5111743274db08c1fa99d020.zip |
Merged master into lockdown_disable
98 files changed, 2740 insertions, 2721 deletions
diff --git a/Documentation/Doxyfile b/Documentation/Doxyfile index 241702811..b674fbc48 100644 --- a/Documentation/Doxyfile +++ b/Documentation/Doxyfile @@ -599,7 +599,7 @@ RECURSIVE = YES # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = ../src/modules/mathlib/CMSIS \ +EXCLUDE = ../src/lib/mathlib/CMSIS \ ../src/modules/attitude_estimator_ekf/codegen # The EXCLUDE_SYMLINKS tag can be used select whether or not files or diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil index 40a13b5d1..ebe8a1a1e 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -1,14 +1,13 @@ #!nsh # -# USB HIL start +# HILStar / X-Plane +# +# Maintainers: Thomas Gubler <thomasgubler@gmail.com> # -echo "[HIL] HILStar starting.." +echo "HIL Rascal 110 starting.." -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig @@ -40,48 +39,7 @@ then param save fi -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE fw +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery index 81d4b5d57..63798bb3c 100644 --- a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery +++ b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery @@ -1,74 +1,31 @@ #!nsh - -echo "[init] Team Blacksheep Discovery Quad" - # -# Load default params for this platform +# Team Blacksheep Discovery Quadcopter +# +# Maintainers: Simon Wilks <sjwilks@gmail.com> # -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - param set MC_ATTRATE_D 0.006 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.17 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # param set MC_ATT_P 5.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.15 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.17 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.006 param set MC_YAWPOS_P 0.5 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 + param set MC_YAWPOS_I 0.15 + param set MC_YAWPOS_D 0.0 param set MC_YAWRATE_P 0.2 - - param save + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 fi -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 +set VEHICLE_TYPE mc +set MIXER FMU_quad_w -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load the mixer for a quad with wide arms -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1100 -pwm max -c 1234 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor +set PWM_OUTPUTS 1234 +set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/10016_3dr_iris b/ROMFS/px4fmu_common/init.d/10016_3dr_iris index b0f4eda79..67c24fab3 100644 --- a/ROMFS/px4fmu_common/init.d/10016_3dr_iris +++ b/ROMFS/px4fmu_common/init.d/10016_3dr_iris @@ -1,73 +1,53 @@ #!nsh - -echo "[init] 3DR Iris Quad" - # -# Load default params for this platform +# 3DR Iris Quadcopter +# +# Maintainers: Anton Babushkin <anton.babushkin@me.com> # -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # param set MC_ATT_P 9.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.15 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.13 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 param set MC_YAWPOS_P 0.5 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 + param set MC_YAWPOS_I 0.15 + param set MC_YAWPOS_D 0.0 param set MC_YAWRATE_P 0.2 - - param save + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + + param set MPC_TILT_MAX 0.5 + param set MPC_THR_MAX 0.8 + param set MPC_THR_MIN 0.2 + param set MPC_XY_D 0 + param set MPC_XY_P 0.5 + param set MPC_XY_VEL_D 0 + param set MPC_XY_VEL_I 0 + param set MPC_XY_VEL_MAX 3 + param set MPC_XY_VEL_P 0.2 + param set MPC_Z_D 0 + param set MPC_Z_P 1 + param set MPC_Z_VEL_D 0 + param set MPC_Z_VEL_I 0.1 + param set MPC_Z_VEL_MAX 2 + param set MPC_Z_VEL_P 0.20 + + param set BAT_V_SCALING 0.00989 + param set BAT_C_SCALING 0.0124 fi -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 +set VEHICLE_TYPE mc +set MIXER FMU_quad_w -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.0098 - set EXIT_ON_END yes -fi - -# -# Load the mixer for a quad with wide arms -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1050 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +set PWM_DISARMED 900 +set PWM_MIN 1000 +set PWM_MAX 2000 diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil deleted file mode 100644 index 9b664d63e..000000000 --- a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil +++ /dev/null @@ -1,105 +0,0 @@ -#!nsh -# -# USB HIL start -# - -echo "[HIL] HILS quadrotor starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.0 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.05 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 3.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.1 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.05 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.5 - param set MPC_THR_MIN 0.1 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 2 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start - -echo "[HIL] setup done, running" - diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil new file mode 100644 index 000000000..8c0797d7c --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil @@ -0,0 +1,46 @@ +#!nsh +# +# HIL Quadcopter X +# +# Maintainers: Anton Babushkin <anton.babushkin@me.com> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + param set MPC_TILT_MAX 0.5 + param set MPC_THR_MAX 0.8 + param set MPC_THR_MIN 0.2 + param set MPC_XY_D 0 + param set MPC_XY_P 0.5 + param set MPC_XY_VEL_D 0 + param set MPC_XY_VEL_I 0 + param set MPC_XY_VEL_MAX 3 + param set MPC_XY_VEL_P 0.2 + param set MPC_Z_D 0 + param set MPC_Z_P 1 + param set MPC_Z_VEL_D 0 + param set MPC_Z_VEL_I 0.1 + param set MPC_Z_VEL_MAX 2 + param set MPC_Z_VEL_P 0.20 +fi + +set HIL yes + +set VEHICLE_TYPE mc +set MIXER FMU_quad_x diff --git a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil index 7b9f41bf6..46da24d35 100644 --- a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil +++ b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil @@ -1,14 +1,13 @@ #!nsh # -# USB HIL start +# HIL Rascal 110 (Flightgear) +# +# Maintainers: Thomas Gubler <thomasgubler@gmail.com> # -echo "[HIL] HILStar starting in state-HIL mode.." +echo "HIL Rascal 110 starting.." -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig @@ -32,48 +31,15 @@ then param set FW_T_SINK_MAX 5.0 param set FW_T_SINK_MIN 4.0 param set FW_Y_ROLLFF 1.1 + param set FW_L1_PERIOD 16 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 param set SYS_AUTOCONFIG 0 param save fi -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE fw +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil index 0cc07ad34..bce3015fc 100644 --- a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil +++ b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil @@ -1,105 +1,46 @@ #!nsh # -# USB HIL start +# HIL Quadcopter + # - -echo "[HIL] HILS quadrotor + starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.0 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.05 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 3.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.1 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.05 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.5 - param set MPC_THR_MIN 0.1 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# Maintainers: Anton Babushkin <anton.babushkin@me.com> # -param set MAV_TYPE 2 -# -# Check if we got an IO -# -if px4io start +if [ $DO_AUTOCONFIG == yes ] then - echo "IO started" -else - fmu mode_serial - echo "FMU started" + # + # Default parameters for this platform + # + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + param set MPC_TILT_MAX 0.5 + param set MPC_THR_MAX 0.8 + param set MPC_THR_MIN 0.2 + param set MPC_XY_D 0 + param set MPC_XY_P 0.5 + param set MPC_XY_VEL_D 0 + param set MPC_XY_VEL_I 0 + param set MPC_XY_VEL_MAX 3 + param set MPC_XY_VEL_P 0.2 + param set MPC_Z_D 0 + param set MPC_Z_P 1 + param set MPC_Z_VEL_D 0 + param set MPC_Z_VEL_I 0.1 + param set MPC_Z_VEL_MAX 2 + param set MPC_Z_VEL_P 0.20 fi -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE mc +set MIXER FMU_quad_+ diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil index 344d78422..46da24d35 100644 --- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil +++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil @@ -1,14 +1,13 @@ #!nsh # -# USB HIL start +# HIL Rascal 110 (Flightgear) +# +# Maintainers: Thomas Gubler <thomasgubler@gmail.com> # -echo "[HIL] HILStar starting.." +echo "HIL Rascal 110 starting.." -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig @@ -40,59 +39,7 @@ then param save fi -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -set MODE autostart -mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix -else - echo "Using /etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -fi - - -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE fw +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm b/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm new file mode 100644 index 000000000..5f3cec4e0 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo coaxial geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_cox + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar index 97c2d7c90..0e5bf60d6 100644 --- a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -1,13 +1,15 @@ #!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on EasyStar" - # -# Load default params for this platform +# MPX EasyStar Plane +# +# Maintainers: ??? # -if param compare SYS_AUTOCONFIG 1 + +if [ $DO_AUTOCONFIG == yes ] then - # Set all params here, then disable autoconfig + # + # Default parameters for this platform + # param set FW_P_D 0 param set FW_P_I 0 param set FW_P_IMAX 15 @@ -31,50 +33,7 @@ then param set FW_L1_PERIOD 16 param set RC_SCALE_ROLL 1.0 param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save fi -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix -else - echo "Using /etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_RET diff --git a/ROMFS/px4fmu_common/init.d/2101_hk_bixler b/ROMFS/px4fmu_common/init.d/2101_hk_bixler index 995d3ba07..1ed923b19 100644 --- a/ROMFS/px4fmu_common/init.d/2101_hk_bixler +++ b/ROMFS/px4fmu_common/init.d/2101_hk_bixler @@ -1,11 +1,11 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler" +echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" # # Load default params for this platform # -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig param set FW_P_D 0 @@ -35,46 +35,6 @@ then param set SYS_AUTOCONFIG 0 param save fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -fi -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker index a6d2ace96..1ed923b19 100644 --- a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker +++ b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker @@ -5,7 +5,7 @@ echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" # # Load default params for this platform # -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig param set FW_P_D 0 @@ -35,48 +35,6 @@ then param set SYS_AUTOCONFIG 0 param save fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi -pwm disarmed -c 3 -p 1056 - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/3030_io_camflyer b/ROMFS/px4fmu_common/init.d/3030_io_camflyer index 65f01c974..cbcc6189b 100644 --- a/ROMFS/px4fmu_common/init.d/3030_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/3030_io_camflyer @@ -2,57 +2,39 @@ echo "[init] PX4FMU v1, v2 with or without IO on Camflyer" -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3031_io_phantom b/ROMFS/px4fmu_common/init.d/3031_io_phantom deleted file mode 100644 index 0cf6ee39a..000000000 --- a/ROMFS/px4fmu_common/init.d/3031_io_phantom +++ /dev/null @@ -1,85 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Phantom FPV" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_AIRSPD_MIN 11.4 - param set FW_AIRSPD_TRIM 14 - param set FW_AIRSPD_MAX 22 - param set FW_L1_PERIOD 15 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 45 - param set FW_P_LIM_MIN -45 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 15 - param set FW_R_P 80 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.8 - param set FW_THR_LND_MAX 0 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0.5 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 2.0 - param set FW_Y_ROLLFF 1.0 - param set RC_SCALE_ROLL 0.6 - param set RC_SCALE_PITCH 0.6 - param set TRIM_PITCH 0.1 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom new file mode 100644 index 000000000..4ebbe9c61 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -0,0 +1,44 @@ +#!nsh +# +# Phantom FPV Flying Wing +# +# Maintainers: Simon Wilks <sjwilks@gmail.com> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 11.4 + param set FW_AIRSPD_TRIM 14 + param set FW_AIRSPD_MAX 22 + param set FW_L1_PERIOD 15 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 15 + param set FW_P_LIM_MAX 45 + param set FW_P_LIM_MIN -45 + param set FW_P_P 60 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 15 + param set FW_R_P 80 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.8 + param set FW_THR_LND_MAX 0 + param set FW_THR_MAX 1 + param set FW_THR_MIN 0.5 + param set FW_T_SINK_MAX 5.0 + param set FW_T_SINK_MIN 2.0 + param set FW_Y_ROLLFF 1.0 + param set RC_SCALE_ROLL 0.6 + param set RC_SCALE_PITCH 0.6 + param set TRIM_PITCH 0.1 +fi + +set VEHICLE_TYPE fw +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index 41e041654..143310af9 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -1,58 +1,43 @@ #!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - # -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - +# Skywalker X5 Flying Wing # -# Start and configure PX4IO or FMU interface +# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> # -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] +if [ $DO_AUTOCONFIG == yes ] then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 fi -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_X5 diff --git a/ROMFS/px4fmu_common/init.d/3033_io_wingwing b/ROMFS/px4fmu_common/init.d/3033_io_wingwing deleted file mode 100644 index 82ff425e6..000000000 --- a/ROMFS/px4fmu_common/init.d/3033_io_wingwing +++ /dev/null @@ -1,84 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on the Wing Wing (aka Z-84)" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_AIRSPD_MIN 7 - param set FW_AIRSPD_TRIM 9 - param set FW_AIRSPD_MAX 14 - param set FW_L1_PERIOD 10 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 20 - param set FW_P_LIM_MAX 30 - param set FW_P_LIM_MIN -20 - param set FW_P_P 30 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 60 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 0.7 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5 - param set FW_T_SINK_MIN 2 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 2.0 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing diff --git a/ROMFS/px4fmu_common/init.d/3033_wingwing b/ROMFS/px4fmu_common/init.d/3033_wingwing new file mode 100644 index 000000000..e53763278 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3033_wingwing @@ -0,0 +1,43 @@ +#!nsh +# +# Wing Wing (aka Z-84) Flying Wing +# +# Maintainers: Simon Wilks <sjwilks@gmail.com> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 +fi + +set VEHICLE_TYPE fw +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3034_fx79 b/ROMFS/px4fmu_common/init.d/3034_fx79 new file mode 100644 index 000000000..8d179d1fd --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3034_fx79 @@ -0,0 +1,43 @@ +#!nsh +# +# FX-79 Buffalo Flying Wing +# +# Maintainers: Simon Wilks <sjwilks@gmail.com> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set FW_AIRSPD_MAX 20 + param set FW_AIRSPD_TRIM 12 + param set FW_AIRSPD_MIN 15 + param set FW_L1_PERIOD 12 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 15 + param set FW_P_LIM_MAX 50 + param set FW_P_LIM_MIN -50 + param set FW_P_P 60 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 1.1 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 80 + param set FW_R_RMAX 100 + param set FW_THR_CRUISE 0.75 + param set FW_THR_MAX 1 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5.0 + param set FW_T_SINK_MIN 4.0 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 1.1 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 +fi + +set VEHICLE_TYPE fw +set MIXER FMU_FX79 diff --git a/ROMFS/px4fmu_common/init.d/3034_io_fx79 b/ROMFS/px4fmu_common/init.d/3034_io_fx79 deleted file mode 100644 index 759c17bb4..000000000 --- a/ROMFS/px4fmu_common/init.d/3034_io_fx79 +++ /dev/null @@ -1,84 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on FX-79 Buffalo" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_AIRSPD_MAX 20 - param set FW_AIRSPD_TRIM 12 - param set FW_AIRSPD_MIN 15 - param set FW_L1_PERIOD 12 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 80 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.75 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 1.1 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_FX79.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_FX79.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_FX79.mix -else - echo "Using /etc/mixers/FMU_FX79.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_FX79.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing diff --git a/ROMFS/px4fmu_common/init.d/4010_dji_f330 b/ROMFS/px4fmu_common/init.d/4010_dji_f330 index 7054210e2..ab1db94d0 100644 --- a/ROMFS/px4fmu_common/init.d/4010_dji_f330 +++ b/ROMFS/px4fmu_common/init.d/4010_dji_f330 @@ -1,31 +1,31 @@ #!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on DJI F330" - # -# Load default params for this platform +# DJI Flame Wheel F330 Quadcopter +# +# Maintainers: Anton Babushkin <anton.babushkin@me.com> # -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.8 param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.05 + param set MC_YAWRATE_D 0.0 + param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 + param set MPC_THR_MAX 0.8 + param set MPC_THR_MIN 0.2 param set MPC_XY_D 0 param set MPC_XY_P 0.5 param set MPC_XY_VEL_D 0 @@ -38,32 +38,14 @@ then param set MPC_Z_VEL_I 0.1 param set MPC_Z_VEL_MAX 2 param set MPC_Z_VEL_P 0.20 - - param save fi -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi +set VEHICLE_TYPE mc +set MIXER FMU_quad_x -sh /etc/init.d/rc.mc_interface - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/4011_dji_f450 b/ROMFS/px4fmu_common/init.d/4011_dji_f450 index a1d253191..299771c1d 100644 --- a/ROMFS/px4fmu_common/init.d/4011_dji_f450 +++ b/ROMFS/px4fmu_common/init.d/4011_dji_f450 @@ -1,74 +1,37 @@ #!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on DJI F450" - # -# Load default params for this platform +# DJI Flame Wheel F450 Quadcopter +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> # -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 param set MC_YAWRATE_P 0.3 - - param save + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 +set VEHICLE_TYPE mc +set MIXER FMU_quad_x - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals (for DJI ESCs) -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1200 -pwm max -c 1234 -p 1800 - -# -# Start common multirotor apps -# -sh /etc/init.d/rc.multirotor +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/4012_hk_x550 b/ROMFS/px4fmu_common/init.d/4012_hk_x550 new file mode 100644 index 000000000..7e020cf59 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4012_hk_x550 @@ -0,0 +1,33 @@ +#!nsh +# +# HobbyKing X550 Quadcopter +# +# Maintainers: Todd Stellanova <tstellanova@gmail.com> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 5.5 + param set MC_ATT_I 0 + param set MC_ATT_D 0 + param set MC_ATTRATE_P 0.14 + param set MC_ATTRATE_I 0 + param set MC_ATTRATE_D 0.006 + param set MC_YAWPOS_P 0.6 + param set MC_YAWPOS_I 0 + param set MC_YAWPOS_D 0 + param set MC_YAWRATE_P 0.08 + param set MC_YAWRATE_I 0 + param set MC_YAWRATE_D 0 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_quad_x + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/40_io_segway b/ROMFS/px4fmu_common/init.d/40_io_segway deleted file mode 100644 index ad455b440..000000000 --- a/ROMFS/px4fmu_common/init.d/40_io_segway +++ /dev/null @@ -1,51 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 10 = ground rover -# -param set MAV_TYPE 10 - -# -# Start MAVLink (depends on orb) -# -mavlink start -d /dev/ttyS1 -b 57600 -usleep 5000 - -# -# Start and configure PX4IO interface -# -sh /etc/init.d/rc.io - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator (depends on orb) -# -attitude_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -roboclaw start /dev/ttyS2 128 1200 -segway start diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm b/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm new file mode 100644 index 000000000..2e5f6ca4f --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Quad + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_quad_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm b/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm new file mode 100644 index 000000000..ddec8f36e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Hexa X geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_hexa_x + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 b/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 deleted file mode 100644 index acd8027fb..000000000 --- a/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 +++ /dev/null @@ -1,76 +0,0 @@ -#!nsh - -echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with or without IO" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_P 0.14 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_D 0.006 - param set MC_ATT_P 5.5 - param set MC_ATT_I 0 - param set MC_ATT_D 0 - param set MC_YAWPOS_D 0 - param set MC_YAWPOS_I 0 - param set MC_YAWPOS_P 0.6 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.08 - param set RC_SCALE_PITCH 1 - param set RC_SCALE_ROLL 1 - param set RC_SCALE_YAW 3 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1100 -pwm max -c 1234 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm b/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm new file mode 100644 index 000000000..106e0fb54 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Hexa + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_hexa_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm b/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm new file mode 100644 index 000000000..f0eea339b --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo X geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_x + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/800_sdlogger b/ROMFS/px4fmu_common/init.d/800_sdlogger deleted file mode 100644 index 9b90cbdd0..000000000 --- a/ROMFS/px4fmu_common/init.d/800_sdlogger +++ /dev/null @@ -1,51 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 init to log only - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param save -fi - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io - # Set PWM values for DJI ESCs -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -sh /etc/init.d/rc.sensors - -gps start - -attitude_estimator_ekf start - -position_estimator_inav start - -if [ -d /fs/microsd ] -then - if [ $BOARD == fmuv1 ] - then - sdlog2 start -r 50 -e -b 16 - else - sdlog2 start -r 200 -e -b 16 - fi -fi diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm b/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm new file mode 100644 index 000000000..992a7aeba --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/cmp_test b/ROMFS/px4fmu_common/init.d/cmp_test deleted file mode 100644 index f86f4f85b..000000000 --- a/ROMFS/px4fmu_common/init.d/cmp_test +++ /dev/null @@ -1,9 +0,0 @@ -#!nsh - -cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -then - echo "CMP returned true" -else - echo "CMP returned false" -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart new file mode 100644 index 000000000..34da2dfef --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -0,0 +1,195 @@ +# +# Check if auto-setup from one of the standard scripts is wanted +# SYS_AUTOSTART = 0 means no autostart (default) +# +# AUTOSTART PARTITION: +# 0 .. 999 Reserved (historical) +# 1000 .. 1999 Simulation setups +# 2000 .. 2999 Standard planes +# 3000 .. 3999 Flying wing +# 4000 .. 4999 Quad X +# 5000 .. 5999 Quad + +# 6000 .. 6999 Hexa X +# 7000 .. 7999 Hexa + +# 8000 .. 8999 Octo X +# 9000 .. 9999 Octo + +# 10000 .. 10999 Wide arm / H frame +# 11000 .. 11999 Hexa Cox +# 12000 .. 12999 Octo Cox + +# +# Simulation setups +# + +if param compare SYS_AUTOSTART 1000 +then + #sh /etc/init.d/1000_rc_fw_easystar.hil +fi + +if param compare SYS_AUTOSTART 1001 +then + sh /etc/init.d/1001_rc_quad_x.hil +fi + +if param compare SYS_AUTOSTART 1002 +then + sh /etc/init.d/1002_rc_fw_state.hil +fi + +if param compare SYS_AUTOSTART 1003 +then + sh /etc/init.d/1003_rc_quad_+.hil +fi + +if param compare SYS_AUTOSTART 1004 +then + sh /etc/init.d/1004_rc_fw_Rascal110.hil +fi + +# +# Standard plane +# + +if param compare SYS_AUTOSTART 2100 100 +then + sh /etc/init.d/2100_mpx_easystar + set MODE custom +fi + +if param compare SYS_AUTOSTART 2101 101 +then + sh /etc/init.d/2101_hk_bixler + set MODE custom +fi + +if param compare SYS_AUTOSTART 2102 102 +then + sh /etc/init.d/2102_3dr_skywalker + set MODE custom +fi + +# +# Flying wing +# + +if param compare SYS_AUTOSTART 3030 30 +then + sh /etc/init.d/3030_io_camflyer +fi + +if param compare SYS_AUTOSTART 3031 31 +then + sh /etc/init.d/3031_phantom +fi + +if param compare SYS_AUTOSTART 3032 32 +then + sh /etc/init.d/3032_skywalker_x5 +fi + +if param compare SYS_AUTOSTART 3033 33 +then + sh /etc/init.d/3033_wingwing +fi + +if param compare SYS_AUTOSTART 3034 34 +then + sh /etc/init.d/3034_fx79 +fi + +# +# Quad X +# + +if param compare SYS_AUTOSTART 4008 8 +then + #sh /etc/init.d/4008_ardrone +fi + +if param compare SYS_AUTOSTART 4009 9 +then + #sh /etc/init.d/4009_ardrone_flow +fi + +if param compare SYS_AUTOSTART 4010 10 +then + sh /etc/init.d/4010_dji_f330 +fi + +if param compare SYS_AUTOSTART 4011 11 +then + sh /etc/init.d/4011_dji_f450 +fi + +if param compare SYS_AUTOSTART 4012 12 +then + sh /etc/init.d/4012_hk_x550 +fi + +# +# Quad + +# + +if param compare SYS_AUTOSTART 5001 +then + sh /etc/init.d/5001_quad_+_pwm +fi + +# +# Hexa X +# + +if param compare SYS_AUTOSTART 6001 +then + sh /etc/init.d/6001_hexa_x_pwm +fi + +# +# Hexa + +# + +if param compare SYS_AUTOSTART 7001 +then + sh /etc/init.d/7001_hexa_+_pwm +fi + +# +# Octo X +# + +if param compare SYS_AUTOSTART 8001 +then + sh /etc/init.d/8001_octo_x_pwm +fi + +# +# Octo + +# + +if param compare SYS_AUTOSTART 9001 +then + sh /etc/init.d/9001_octo_+_pwm +fi + +# +# Wide arm / H frame +# + +if param compare SYS_AUTOSTART 10015 15 +then + sh /etc/init.d/10015_tbs_discovery +fi + +if param compare SYS_AUTOSTART 10016 16 +then + sh /etc/init.d/10016_3dr_iris +fi + +# +# Octo Coaxial +# + +if param compare SYS_AUTOSTART 12001 +then + sh /etc/init.d/12001_octo_cox_pwm +fi diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl b/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl deleted file mode 100644 index 40b2ee68b..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl +++ /dev/null @@ -1,113 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.002 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.09 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 6.8 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start the Mikrokopter ESC driver -# -if [ $MKBLCTRL_MODE == yes ] -then - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing" - mkblctrl -mkmode x - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing" - mkblctrl -mkmode + - fi -else - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame" - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame" - fi - mkblctrl -fi - -usleep 10000 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -if [ $MKBLCTRL_FRAME == x ] -then - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix -else - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix -fi - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_io_esc b/ROMFS/px4fmu_common/init.d/rc.custom_io_esc deleted file mode 100644 index 045e41e52..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.custom_io_esc +++ /dev/null @@ -1,120 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.002 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.09 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 6.8 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -echo "RC script for PX4FMU + PX4IO + PPM-ESCs running" - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -usleep 10000 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start -d /dev/ttyS1 -b 57600 - usleep 5000 - - sh /etc/init.d/rc.io -else - fmu mode_pwm - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS1 -b 57600 - usleep 5000 - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -if [ $ESC_MAKER = afro ] -then - # Set PWM values for Afro ESCs - pwm disarmed -c 1234 -p 1050 - pwm min -c 1234 -p 1080 - pwm max -c 1234 -p 1860 -else - # Set PWM values for typical ESCs - pwm disarmed -c 1234 -p 900 - pwm min -c 1234 -p 980 - pwm max -c 1234 -p 1800 -fi - -# -# Load mixer -# -if [ $FRAME_GEOMETRY == x ] -then - echo "Frame geometry X" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix -else - if [ $FRAME_GEOMETRY == w ] - then - echo "Frame geometry W" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - else - echo "Frame geometry +" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix - fi -fi - -# -# Set PWM output frequency -# -pwm rate -r 400 -c 1234 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi - -echo "Script end" diff --git a/ROMFS/px4fmu_common/init.d/rc.fixedwing b/ROMFS/px4fmu_common/init.d/rc.fixedwing deleted file mode 100644 index f02851006..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.fixedwing +++ /dev/null @@ -1,34 +0,0 @@ -#!nsh -# -# Standard everything needed for fixedwing except mixer, actuator output and mavlink -# - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start logging (depends on sensors) -# -sh /etc/init.d/rc.logging - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude and position estimator -# -att_pos_estimator_ekf start - -# -# Start attitude controller -# -fw_att_control start - -# -# Start the position controller -# -fw_pos_control_l1 start diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_apps b/ROMFS/px4fmu_common/init.d/rc.fw_apps new file mode 100644 index 000000000..d354fb06f --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.fw_apps @@ -0,0 +1,19 @@ +#!nsh +# +# Standard apps for fixed wing +# + +# +# Start the attitude and position estimator +# +att_pos_estimator_ekf start + +# +# Start attitude controller +# +fw_att_control start + +# +# Start the position controller +# +fw_pos_control_l1 start diff --git a/ROMFS/px4fmu_common/init.d/rc.hexa b/ROMFS/px4fmu_common/init.d/rc.hexa deleted file mode 100644 index 097db28e4..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.hexa +++ /dev/null @@ -1,94 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Hex" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/ -# 13 = hexarotor -# -param set MAV_TYPE 13 - -set EXIT_ON_END no - -# -# Start and configure PX4IO interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # This is not possible on a hexa - tone_alarm error -fi - -# -# Load mixer -# -mixer load /dev/pwm_output $MIXER - -# -# Set PWM output frequency to 400 Hz -# -pwm rate -a -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 123456 -p 900 -pwm min -c 123456 -p 1100 -pwm max -c 123456 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/rc.interface b/ROMFS/px4fmu_common/init.d/rc.interface new file mode 100644 index 000000000..d25f01dde --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.interface @@ -0,0 +1,72 @@ +#!nsh +# +# Script to configure control interface +# + +if [ $MIXER != none ] +then + # + # Load mixer + # + set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix + + #Use the mixer file from the SD-card if it exists + if [ -f $MIXERSD ] + then + set MIXER_FILE $MIXERSD + else + set MIXER_FILE /etc/mixers/$MIXER.mix + fi + + if [ $OUTPUT_MODE == mkblctrl ] + then + set OUTPUT_DEV /dev/mkblctrl + else + set OUTPUT_DEV /dev/pwm_output + fi + + if mixer load $OUTPUT_DEV $MIXER_FILE + then + echo "[init] Mixer loaded: $MIXER_FILE" + else + echo "[init] Error loading mixer: $MIXER_FILE" + tone_alarm $TUNE_OUT_ERROR + fi +else + echo "[init] Mixer not defined" + tone_alarm $TUNE_OUT_ERROR +fi + +if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == io ] +then + if [ $PWM_OUTPUTS != none ] + then + # + # Set PWM output frequency + # + if [ $PWM_RATE != none ] + then + echo "[init] Set PWM rate: $PWM_RATE" + pwm rate -c $PWM_OUTPUTS -r $PWM_RATE + fi + + # + # Set disarmed, min and max PWM values + # + if [ $PWM_DISARMED != none ] + then + echo "[init] Set PWM disarmed: $PWM_DISARMED" + pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED + fi + if [ $PWM_MIN != none ] + then + echo "[init] Set PWM min: $PWM_MIN" + pwm min -c $PWM_OUTPUTS -p $PWM_MIN + fi + if [ $PWM_MAX != none ] + then + echo "[init] Set PWM max: $PWM_MAX" + pwm max -c $PWM_OUTPUTS -p $PWM_MAX + fi + fi +fi diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io index aaf91b316..c9d964f8e 100644 --- a/ROMFS/px4fmu_common/init.d/rc.io +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -1,23 +1,21 @@ # -# Start PX4IO interface (depends on orb, commander) +# Init PX4IO interface # -if px4io start -then - # - # Allow PX4IO to recover from midair restarts. - # this is very unlikely, but quite safe and robust. - px4io recovery - # - # Disable px4io topic limiting - # - if [ $BOARD == fmuv1 ] - then - px4io limit 200 - else - px4io limit 400 - fi -else - # SOS - tone_alarm error +# +# Allow PX4IO to recover from midair restarts. +# this is very unlikely, but quite safe and robust. +# +px4io recovery + +# +# Adjust PX4IO update rate limit +# +set PX4IO_LIMIT 400 +if hw_ver compare PX4FMU_V1 +then + set PX4IO_LIMIT 200 fi + +echo "[init] Set PX4IO update rate limit: $PX4IO_LIMIT Hz" +px4io limit $PX4IO_LIMIT diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index dc4be8055..ac620844c 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -1,14 +1,14 @@ #!nsh # -# Initialise logging services. +# Initialize logging services. # if [ -d /fs/microsd ] then - if [ $BOARD == fmuv1 ] + if hw_ver compare PX4FMU_V1 then - sdlog2 start -r 50 -a -b 16 + sdlog2 start -r 50 -a -b 16 -t else - sdlog2 start -r 200 -a -b 16 + sdlog2 start -r 200 -a -b 16 -t fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_apps b/ROMFS/px4fmu_common/init.d/rc.mc_apps new file mode 100644 index 000000000..8b51d57e5 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.mc_apps @@ -0,0 +1,24 @@ +#!nsh +# +# Standard apps for multirotors +# + +# +# Start the attitude estimator +# +attitude_estimator_ekf start + +# +# Start position estimator +# +position_estimator_inav start + +# +# Start attitude control +# +multirotor_att_control start + +# +# Start position control +# +multirotor_pos_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_interface b/ROMFS/px4fmu_common/init.d/rc.mc_interface deleted file mode 100644 index 6bb2e84ec..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.mc_interface +++ /dev/null @@ -1,49 +0,0 @@ -#!nsh -# -# Script to set PWM min / max limits and mixer -# - -# -# Load mixer -# -if [ $FRAME_GEOMETRY == x ] -then - echo "Frame geometry X" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix -else - if [ $FRAME_GEOMETRY == w ] - then - echo "Frame geometry W" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - else - echo "Frame geometry +" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix - fi -fi - -if [ $FRAME_COUNT == 4 ] -then - set OUTPUTS 1234 - param set MAV_TYPE 2 -else - if [ $FRAME_COUNT == 6 ] - then - set OUTPUTS 123456 - param set MAV_TYPE 13 - else - set OUTPUTS 12345678 - fi -fi - - -# -# Set PWM output frequency -# -pwm rate -c $OUTPUTS -r $PWM_RATE - -# -# Set disarmed, min and max PWM signals (for DJI ESCs) -# -pwm disarmed -c $OUTPUTS -p $PWM_DISARMED -pwm min -c $OUTPUTS -p $PWM_MIN -pwm max -c $OUTPUTS -p $PWM_MAX diff --git a/ROMFS/px4fmu_common/init.d/rc.multirotor b/ROMFS/px4fmu_common/init.d/rc.multirotor deleted file mode 100644 index bc550ac5a..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.multirotor +++ /dev/null @@ -1,39 +0,0 @@ -#!nsh -# -# Standard everything needed for multirotors except mixer, actuator output and mavlink -# - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start logging (depends on sensors) -# -sh /etc/init.d/rc.logging - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.octo b/ROMFS/px4fmu_common/init.d/rc.octo deleted file mode 100644 index ecb12e96e..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.octo +++ /dev/null @@ -1,94 +0,0 @@ -#!nsh - -echo "[init] Octorotor startup" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/ -# 14 = octorotor -# -param set MAV_TYPE 14 - -set EXIT_ON_END no - -# -# Start and configure PX4IO interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # This is not possible on an octo - tone_alarm error -fi - -# -# Load mixer -# -mixer load /dev/pwm_output $MIXER - -# -# Set PWM output frequency to 400 Hz -# -pwm rate -a -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 12345678 -p 900 -pwm min -c 12345678 -p 1100 -pwm max -c 12345678 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index 070a4e7e3..badbf92c3 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -10,41 +10,42 @@ ms5611 start adc start -# mag might be external +# Mag might be external if hmc5883 start then - echo "using HMC5883" + echo "[init] Using HMC5883" fi if mpu6000 start then - echo "using MPU6000" + echo "[init] Using MPU6000" fi if l3gd20 start then - echo "using L3GD20(H)" + echo "[init] Using L3GD20(H)" fi -if lsm303d start +if hw_ver compare PX4FMU_V2 then - set BOARD fmuv2 -else - set BOARD fmuv1 + if lsm303d start + then + echo "[init] Using LSM303D" + fi fi # Start airspeed sensors if meas_airspeed start then - echo "using MEAS airspeed sensor" + echo "[init] Using MEAS airspeed sensor" else if ets_airspeed start then - echo "using ETS airspeed sensor (bus 3)" + echo "[init] Using ETS airspeed sensor (bus 3)" else if ets_airspeed start -b 1 then - echo "Using ETS airspeed sensor (bus 1)" + echo "[init] Using ETS airspeed sensor (bus 1)" fi fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.standalone b/ROMFS/px4fmu_common/init.d/rc.standalone deleted file mode 100644 index 67e95215b..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.standalone +++ /dev/null @@ -1,13 +0,0 @@ -#!nsh -# -# Flight startup script for PX4FMU standalone configuration. -# - -echo "[init] doing standalone PX4FMU startup..." - -# -# Start the ORB -# -uorb start - -echo "[init] startup done" diff --git a/ROMFS/px4fmu_common/init.d/rc.usb b/ROMFS/px4fmu_common/init.d/rc.usb index ccf2cd47e..0cd8a0e04 100644 --- a/ROMFS/px4fmu_common/init.d/rc.usb +++ b/ROMFS/px4fmu_common/init.d/rc.usb @@ -36,39 +36,6 @@ then echo "Commander started" fi -# Start px4io if present -if px4io start -then - echo "PX4IO driver started" -else - if fmu mode_serial - then - echo "FMU driver started" - fi -fi - -# Start sensors -sh /etc/init.d/rc.sensors - -# Start one of the estimators -if attitude_estimator_ekf status -then - echo "multicopter att filter running" -else - if att_pos_estimator_ekf status - then - echo "fixedwing att filter running" - else - attitude_estimator_ekf start - fi -fi - -# Start GPS -if gps start -then - echo "GPS started" -fi - echo "MAVLink started, exiting shell.." # Exit shell to make it available to MAVLink diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index ed034877f..6f4e1f3b5 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -8,39 +8,40 @@ # set MODE autostart -set logfile /fs/microsd/bootlog.txt +set RC_FILE /fs/microsd/etc/rc.txt +set CONFIG_FILE /fs/microsd/etc/config.txt +set EXTRAS_FILE /fs/microsd/etc/extras.txt + +set TUNE_OUT_ERROR ML<<CP4CP4CP4CP4CP4 # # Try to mount the microSD card. # -echo "[init] looking for microSD..." +echo "[init] Looking for microSD..." if mount -t vfat /dev/mmcsd0 /fs/microsd then - echo "[init] card mounted at /fs/microsd" + set LOG_FILE /fs/microsd/bootlog.txt + echo "[init] microSD card mounted at /fs/microsd" # Start playing the startup tune tone_alarm start else - echo "[init] no microSD card found" + set LOG_FILE /dev/null + echo "[init] No microSD card found" # Play SOS tone_alarm error fi # # Look for an init script on the microSD card. +# Disable autostart if the script found. # -# To prevent automatic startup in the current flight mode, -# the script should set MODE to some other value. -# -if [ -f /fs/microsd/etc/rc ] -then - echo "[init] reading /fs/microsd/etc/rc" - sh /fs/microsd/etc/rc -fi -# Also consider rc.txt files -if [ -f /fs/microsd/etc/rc.txt ] +if [ -f $RC_FILE ] then - echo "[init] reading /fs/microsd/etc/rc.txt" - sh /fs/microsd/etc/rc.txt + echo "[init] Executing init script: $RC_FILE" + sh $RC_FILE + set MODE custom +else + echo "[init] Init script not found: $RC_FILE" fi # if this is an APM build then there will be a rc.APM script @@ -52,20 +53,19 @@ then echo "[init] USB interface connected" fi - echo "Running rc.APM" + echo "[init] Running rc.APM" # if APM startup is successful then nsh will exit sh /etc/init.d/rc.APM fi if [ $MODE == autostart ] then + echo "[init] AUTOSTART mode" + # - # Start terminal + # Start CDC/ACM serial driver # - if sercon - then - echo "USB connected" - fi + sercon # # Start the ORB (first app to start) @@ -73,27 +73,20 @@ then uorb start # - # Load microSD params + # Load parameters # + set PARAM_FILE /fs/microsd/params if mtd start then - param select /fs/mtd_params - if param load /fs/mtd_params - then - else - echo "FAILED LOADING PARAMS" - fi + set PARAM_FILE /fs/mtd_params + fi + + param select $PARAM_FILE + if param load + then + echo "[init] Parameters loaded: $PARAM_FILE" else - param select /fs/microsd/params - if [ -f /fs/microsd/params ] - then - if param load /fs/microsd/params - then - echo "Parameters loaded" - else - echo "Parameter file corrupt - ignoring" - fi - fi + echo "[init] ERROR: Parameters loading failed: $PARAM_FILE" fi # @@ -101,355 +94,418 @@ then # if rgbled start then - echo "Using external RGB Led" + echo "[init] Using external RGB Led" else if blinkm start then + echo "[init] Using blinkm" blinkm systemstate fi fi # - # Start the Commander (needs to be this early for in-air-restarts) + # Set default values # - commander start - - if param compare SYS_AUTOSTART 1000 - then - sh /etc/init.d/1000_rc_fw_easystar.hil - set MODE custom - fi + set HIL no + set VEHICLE_TYPE none + set MIXER none + set USE_IO yes + set OUTPUT_MODE none + set PWM_OUTPUTS none + set PWM_RATE none + set PWM_DISARMED none + set PWM_MIN none + set PWM_MAX none + set MKBLCTRL_MODE none + set FMU_MODE pwm + set MAV_TYPE none - if param compare SYS_AUTOSTART 1001 + # + # Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts + # + if param compare SYS_AUTOCONFIG 1 then - sh /etc/init.d/1001_rc_quad.hil - set MODE custom + set DO_AUTOCONFIG yes + else + set DO_AUTOCONFIG no fi - - if param compare SYS_AUTOSTART 1002 + + # + # Set parameters and env variables for selected AUTOSTART + # + if param compare SYS_AUTOSTART 0 then - sh /etc/init.d/1002_rc_fw_state.hil - set MODE custom + echo "[init] Don't try to find autostart script" + else + sh /etc/init.d/rc.autostart fi - - if param compare SYS_AUTOSTART 1003 + + # + # Override parameters from user configuration file + # + if [ -f $CONFIG_FILE ] then - sh /etc/init.d/1003_rc_quad_+.hil - set MODE custom + echo "[init] Reading config: $CONFIG_FILE" + sh $CONFIG_FILE + else + echo "[init] Config file not found: $CONFIG_FILE" fi - if param compare SYS_AUTOSTART 1004 + # + # If autoconfig parameter was set, reset it and save parameters + # + if [ $DO_AUTOCONFIG == yes ] then - sh /etc/init.d/1004_rc_fw_Rascal110.hil - set MODE custom + param set SYS_AUTOCONFIG 0 + param save fi - if [ $MODE != custom ] + set IO_PRESENT no + + if [ $USE_IO == yes ] then - # Try to get an USB console - nshterm /dev/ttyACM0 & + # + # Check if PX4IO present and update firmware if needed + # + if [ -f /etc/extras/px4io-v2_default.bin ] + then + set IO_FILE /etc/extras/px4io-v2_default.bin + else + set IO_FILE /etc/extras/px4io-v1_default.bin + fi + + if px4io checkcrc $IO_FILE + then + echo "[init] PX4IO CRC OK" + echo "PX4IO CRC OK" >> $LOG_FILE + + set IO_PRESENT yes + else + echo "[init] Trying to update" + echo "PX4IO Trying to update" >> $LOG_FILE + + tone_alarm MLL32CP8MB + + if px4io forceupdate 14662 $IO_FILE + then + usleep 500000 + if px4io checkcrc $IO_FILE + then + echo "[init] PX4IO CRC OK, update successful" + echo "PX4IO CRC OK after updating" >> $LOG_FILE + tone_alarm MLL8CDE + + set IO_PRESENT yes + else + echo "[init] ERROR: PX4IO update failed" + echo "PX4IO update failed" >> $LOG_FILE + tone_alarm $TUNE_OUT_ERROR + fi + else + echo "[init] ERROR: PX4IO update failed" + echo "PX4IO update failed" >> $LOG_FILE + tone_alarm $TUNE_OUT_ERROR + fi + fi + + if [ $IO_PRESENT == no ] + then + echo "[init] ERROR: PX4IO not found" + tone_alarm $TUNE_OUT_ERROR + fi fi - + # - # Upgrade PX4IO firmware + # Set default output if not set # + if [ $OUTPUT_MODE == none ] + then + if [ $USE_IO == yes ] + then + set OUTPUT_MODE io + else + set OUTPUT_MODE fmu + fi + fi - if [ -f /etc/extras/px4io-v2_default.bin ] + if [ $OUTPUT_MODE == io -a $IO_PRESENT != yes ] then - set io_file /etc/extras/px4io-v2_default.bin - else - set io_file /etc/extras/px4io-v1_default.bin + # Need IO for output but it not present, disable output + set OUTPUT_MODE none + echo "[init] ERROR: PX4IO not found, disabling output" + + # Avoid using ttyS0 for MAVLink on FMUv1 + if hw_ver compare PX4FMU_V1 + then + set FMU_MODE serial + fi fi - if px4io start + if [ $HIL == yes ] then - echo "PX4IO OK" - echo "PX4IO OK" >> $logfile + set OUTPUT_MODE hil + if hw_ver compare PX4FMU_V1 + then + set FMU_MODE serial + fi + else + # Try to get an USB console if not in HIL mode + nshterm /dev/ttyACM0 & fi - if px4io checkcrc $io_file + # + # Start the Commander (needs to be this early for in-air-restarts) + # + commander start + + # + # Start primary output + # + set TTYS1_BUSY no + + # If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output + if [ $OUTPUT_MODE != none ] then - echo "PX4IO CRC OK" - echo "PX4IO CRC OK" >> $logfile - else - echo "PX4IO CRC failure" - echo "PX4IO CRC failure" >> $logfile - tone_alarm MBABGP - if px4io forceupdate 14662 $io_file + if [ $OUTPUT_MODE == io ] then - usleep 500000 + echo "[init] Use PX4IO PWM as primary output" if px4io start then - echo "PX4IO restart OK" - echo "PX4IO restart OK" >> $logfile - tone_alarm MSPAA + echo "[init] PX4IO started" + sh /etc/init.d/rc.io else - echo "PX4IO restart failed" - echo "PX4IO restart failed" >> $logfile - tone_alarm MNGGG - sleep 10 - reboot + echo "[init] ERROR: PX4IO start failed" + tone_alarm $TUNE_OUT_ERROR + fi + fi + if [ $OUTPUT_MODE == fmu ] + then + echo "[init] Use FMU PWM as primary output" + if fmu mode_$FMU_MODE + then + echo "[init] FMU mode_$FMU_MODE started" + else + echo "[init] ERROR: FMU mode_$FMU_MODE start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + if hw_ver compare PX4FMU_V1 + then + if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] + then + set TTYS1_BUSY yes + fi + if [ $FMU_MODE == pwm_gpio ] + then + set TTYS1_BUSY yes + fi + fi + fi + if [ $OUTPUT_MODE == mkblctrl ] + then + echo "[init] Use MKBLCTRL as primary output" + set MKBLCTRL_ARG "" + if [ $MKBLCTRL_MODE == x ] + then + set MKBLCTRL_ARG "-mkmode x" + fi + if [ $MKBLCTRL_MODE == + ] + then + set MKBLCTRL_ARG "-mkmode +" + fi + + if mkblctrl $MKBLCTRL_ARG + then + echo "[init] MKBLCTRL started" + else + echo "[init] ERROR: MKBLCTRL start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + fi + if [ $OUTPUT_MODE == hil ] + then + echo "[init] Use HIL as primary output" + if hil mode_pwm + then + echo "[init] HIL output started" + else + echo "[init] ERROR: HIL output start failed" + tone_alarm $TUNE_OUT_ERROR + fi + fi + + # + # Start IO or FMU for RC PPM input if needed + # + if [ $IO_PRESENT == yes ] + then + if [ $OUTPUT_MODE != io ] + then + if px4io start + then + echo "[init] PX4IO started" + sh /etc/init.d/rc.io + else + echo "[init] ERROR: PX4IO start failed" + tone_alarm $TUNE_OUT_ERROR + fi fi else - echo "PX4IO update failed" - echo "PX4IO update failed" >> $logfile - tone_alarm MNGGG + if [ $OUTPUT_MODE != fmu ] + then + if fmu mode_$FMU_MODE + then + echo "[init] FMU mode_$FMU_MODE started" + else + echo "[init] ERROR: FMU mode_$FMU_MODE start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + if hw_ver compare PX4FMU_V1 + then + if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] + then + set TTYS1_BUSY yes + fi + if [ $FMU_MODE == pwm_gpio ] + then + set TTYS1_BUSY yes + fi + fi + fi fi fi - - set EXIT_ON_END no # - # Check if auto-setup from one of the standard scripts is wanted - # SYS_AUTOSTART = 0 means no autostart (default) - # - # AUTOSTART PARTITION: - # 0 .. 999 Reserved (historical) - # 1000 .. 1999 Simulation setups - # 2000 .. 2999 Standard planes - # 3000 .. 3999 Flying wing - # 4000 .. 4999 Quad X - # 5000 .. 5999 Quad + - # 6000 .. 6999 Hexa X - # 7000 .. 7999 Hexa + - # 8000 .. 8999 Octo X - # 9000 .. 9999 Octo + - # 10000 .. 10999 Wide arm / H frame - # 11000 .. 11999 Hexa Cox - # 12000 .. 12999 Octo Cox - - if param compare SYS_AUTOSTART 4008 8 - then - sh /etc/init.d/4008_ardrone - set MODE custom - fi + # MAVLink + # + set EXIT_ON_END no - if param compare SYS_AUTOSTART 4009 9 + if [ $HIL == yes ] then - sh /etc/init.d/4009_ardrone_flow - set MODE custom + sleep 1 + mavlink start -b 230400 -d /dev/ttyACM0 + usleep 5000 + else + if [ $TTYS1_BUSY == yes ] + then + # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else + mavlink start -d /dev/ttyS0 + usleep 5000 + + # Exit from nsh to free port for mavlink + set EXIT_ON_END yes + else + # Start MAVLink on default port: ttyS1 + mavlink start + usleep 5000 + fi fi - if param compare SYS_AUTOSTART 4010 10 - then - set FRAME_GEOMETRY x - set FRAME_COUNT 4 - set PWM_MIN 1200 - set PWM_MAX 1900 - set PWM_DISARMED 900 - sh /etc/init.d/4010_dji_f330 - set MODE custom - fi - - if param compare SYS_AUTOSTART 4011 11 - then - sh /etc/init.d/4011_dji_f450 - set MODE custom - fi - - if param compare SYS_AUTOSTART 4012 - then - sh /etc/init.d/666_fmu_q_x550 - set MODE custom - fi - - if param compare SYS_AUTOSTART 6012 12 - then - set MIXER /etc/mixers/FMU_hex_x.mix - sh /etc/init.d/rc.hexa - set MODE custom - fi - - if param compare SYS_AUTOSTART 7013 13 - then - set MIXER /etc/mixers/FMU_hex_+.mix - sh /etc/init.d/rc.hexa - set MODE custom - fi - - if param compare SYS_AUTOSTART 8001 - then - set MIXER /etc/mixers/FMU_octo_x.mix - sh /etc/init.d/rc.octo - set MODE custom - fi - - if param compare SYS_AUTOSTART 9001 - then - set MIXER /etc/mixers/FMU_octo_+.mix - sh /etc/init.d/rc.octo - set MODE custom - fi + # + # Sensors, Logging, GPS + # + echo "[init] Start sensors" + sh /etc/init.d/rc.sensors - if param compare SYS_AUTOSTART 12001 + if [ $HIL == no ] then - set MIXER /etc/mixers/FMU_octo_cox.mix - sh /etc/init.d/rc.octo - set MODE custom + echo "[init] Start logging" + sh /etc/init.d/rc.logging + + echo "[init] Start GPS" + gps start fi - if param compare SYS_AUTOSTART 10015 15 - then - sh /etc/init.d/10015_tbs_discovery - set MODE custom - fi - - if param compare SYS_AUTOSTART 10016 16 - then - sh /etc/init.d/10016_3dr_iris - set MODE custom - fi - - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame - if param compare SYS_AUTOSTART 4017 17 - then - set MKBLCTRL_MODE no - set MKBLCTRL_FRAME x - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom - fi - - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame - if param compare SYS_AUTOSTART 5018 18 - then - set MKBLCTRL_MODE no - set MKBLCTRL_FRAME + - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom - fi - - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 4019 19 - then - set MKBLCTRL_MODE yes - set MKBLCTRL_FRAME x - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom - fi - - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 5020 20 + # + # Fixed wing setup + # + if [ $VEHICLE_TYPE == fw ] then - set MKBLCTRL_MODE yes - set MKBLCTRL_FRAME + - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom + echo "[init] Vehicle type: FIXED WING" + + if [ $MIXER == none ] + then + # Set default mixer for fixed wing if not defined + set MIXER FMU_AERT + fi + + if [ $MAV_TYPE == none ] + then + # Use MAV_TYPE = 1 (fixed wing) if not defined + set MAV_TYPE 1 + fi + + param set MAV_TYPE $MAV_TYPE + + # Load mixer and configure outputs + sh /etc/init.d/rc.interface + + # Start standard fixedwing apps + sh /etc/init.d/rc.fw_apps fi - # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 4021 21 + # + # Multicopters setup + # + if [ $VEHICLE_TYPE == mc ] then - set FRAME_GEOMETRY x - set ESC_MAKER afro - sh /etc/init.d/rc.custom_io_esc - set MODE custom - fi + echo "[init] Vehicle type: MULTICOPTER" - # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 10022 22 - then - set FRAME_GEOMETRY w - sh /etc/init.d/rc.custom_io_esc - set MODE custom - fi - - if param compare SYS_AUTOSTART 3030 30 - then - sh /etc/init.d/3030_io_camflyer - set MODE custom - fi + if [ $MIXER == none ] + then + # Set default mixer for multicopter if not defined + set MIXER quad_x + fi - if param compare SYS_AUTOSTART 3031 31 - then - sh /etc/init.d/3031_io_phantom - set MODE custom - fi - - if param compare SYS_AUTOSTART 3032 32 - then - sh /etc/init.d/3032_skywalker_x5 - set MODE custom - fi + if [ $MAV_TYPE == none ] + then + # Use MAV_TYPE = 2 (quadcopter) if not defined + set MAV_TYPE 2 + + # Use mixer to detect vehicle type + if [ $MIXER == FMU_hex_x -o $MIXER == FMU_hex_+ ] + then + param set MAV_TYPE 13 + fi + if [ $MIXER == FMU_octo_x -o $MIXER == FMU_octo_+ ] + then + param set MAV_TYPE 14 + fi + if [ $MIXER == FMU_octo_cox ] + then + param set MAV_TYPE 14 + fi + fi - if param compare SYS_AUTOSTART 3033 33 - then - sh /etc/init.d/3033_io_wingwing - set MODE custom + param set MAV_TYPE $MAV_TYPE + + # Load mixer and configure outputs + sh /etc/init.d/rc.interface + + # Start standard multicopter apps + sh /etc/init.d/rc.mc_apps fi - if param compare SYS_AUTOSTART 3034 34 - then - sh /etc/init.d/3034_io_fx79 - set MODE custom - fi - - if param compare SYS_AUTOSTART 40 - then - sh /etc/init.d/40_io_segway - set MODE custom - fi - - if param compare SYS_AUTOSTART 2100 100 + # + # Generic setup (autostart ID not found) + # + if [ $VEHICLE_TYPE == none ] then - sh /etc/init.d/2100_mpx_easystar - set MODE custom - fi + echo "[init] Vehicle type: GENERIC" - if param compare SYS_AUTOSTART 2101 101 - then - sh /etc/init.d/2101_hk_bixler - set MODE custom + # Load mixer and configure outputs + sh /etc/init.d/rc.interface fi - if param compare SYS_AUTOSTART 2102 102 - then - sh /etc/init.d/2102_3dr_skywalker - set MODE custom - fi - - if param compare SYS_AUTOSTART 800 - then - sh /etc/init.d/800_sdlogger - set MODE custom - fi - - # Start any custom extensions that might be missing - if [ -f /fs/microsd/etc/rc.local ] - then - sh /fs/microsd/etc/rc.local - fi - - # If none of the autostart scripts triggered, get a minimal setup - if [ $MODE == autostart ] + # Start any custom addons + if [ -f $EXTRAS_FILE ] then - # Telemetry port is on both FMU boards ttyS1 - # but the AR.Drone motors can be get 'flashed' - # if starting MAVLink on them - so do not - # start it as default (default link: USB) - - # Start commander - commander start - - # Start px4io if present - if px4io detect - then - px4io start - else - if fmu mode_serial - then - echo "FMU driver (no PWM) started" - fi - fi - - # Start sensors - sh /etc/init.d/rc.sensors - - # Start one of the estimators - attitude_estimator_ekf start - - # Start GPS - gps start - + echo "[init] Starting addons script: $EXTRAS_FILE" + sh $EXTRAS_FILE + else + echo "[init] Addons script not found: $EXTRAS_FILE" fi if [ $EXIT_ON_END == yes ] diff --git a/Tools/px4params/.gitignore b/Tools/px4params/.gitignore index 73cf39575..5d0378b4a 100644 --- a/Tools/px4params/.gitignore +++ b/Tools/px4params/.gitignore @@ -1,2 +1,3 @@ parameters.wiki -parameters.xml
\ No newline at end of file +parameters.xml +cookies.txt
\ No newline at end of file diff --git a/Tools/px4params/dokuwikiout.py b/Tools/px4params/dokuwikiout.py index 4d40a6201..c5cf65ea6 100644 --- a/Tools/px4params/dokuwikiout.py +++ b/Tools/px4params/dokuwikiout.py @@ -1,10 +1,24 @@ import output +from xml.sax.saxutils import escape class DokuWikiOutput(output.Output): def Generate(self, groups): - result = "" + pre_text = """<?xml version='1.0'?> + <methodCall> + <methodName>wiki.putPage</methodName> + <params> + <param> + <value> + <string>:firmware:parameters</string> + </value> + </param> + <param> + <value> + <string>""" + result = "====== Parameter Reference ======\nThis list is auto-generated every few minutes and contains the most recent parameter names and default values." for group in groups: result += "==== %s ====\n\n" % group.GetName() + result += "|< 100% 20% 20% 10% 10% 10% 30%>|\n" result += "^ Name ^ Description ^ Min ^ Max ^ Default ^ Comment ^\n" for param in group.GetParams(): code = param.GetFieldValue("code") @@ -13,25 +27,36 @@ class DokuWikiOutput(output.Output): result += "| %s | %s " % (code, name) min_val = param.GetFieldValue("min") if min_val is not None: - result += "| %s " % min_val + result += " | %s " % min_val else: - result += "|" + result += " | " max_val = param.GetFieldValue("max") if max_val is not None: - result += "| %s " % max_val + result += " | %s " % max_val else: - result += "|" + result += " | " def_val = param.GetFieldValue("default") if def_val is not None: result += "| %s " % def_val else: - result += "|" + result += " | " long_desc = param.GetFieldValue("long_desc") if long_desc is not None: long_desc = long_desc.replace("\n", "") result += "| %s " % long_desc else: - result += "|" - result += "|\n" + result += " | " + result += " |\n" result += "\n" - return result + post_text = """</string> + </value> + </param> + <param> + <value> + <name>sum</name> + <string>Updated parameters automagically from code.</string> + </value> + </param> + </params> + </methodCall>""" + return pre_text + escape(result) + post_text diff --git a/Tools/px4params/xmlrpc.sh b/Tools/px4params/xmlrpc.sh new file mode 100644 index 000000000..36c52ff71 --- /dev/null +++ b/Tools/px4params/xmlrpc.sh @@ -0,0 +1,5 @@ +python px_process_params.py + +rm cookies.txt +curl --cookie cookies.txt --cookie-jar cookies.txt --user-agent Mozilla/4.0 --data "u=$XMLRPCUSER&p=$XMLRPCPASS" https://pixhawk.org/start?do=login +curl -k --cookie cookies.txt -H "Content-Type: application/xml" -X POST --data-binary @parameters.wiki "https://pixhawk.org/lib/exe/xmlrpc.php" diff --git a/makefiles/config_px4fmu-v1_default.mk b/makefiles/config_px4fmu-v1_default.mk index a269d01ab..43a03f4f7 100644 --- a/makefiles/config_px4fmu-v1_default.mk +++ b/makefiles/config_px4fmu-v1_default.mk @@ -57,6 +57,7 @@ MODULES += systemcmds/top MODULES += systemcmds/tests MODULES += systemcmds/config MODULES += systemcmds/nshterm +MODULES += systemcmds/hw_ver # # General system control diff --git a/makefiles/config_px4fmu-v2_default.mk b/makefiles/config_px4fmu-v2_default.mk index e90312226..880e2738a 100644 --- a/makefiles/config_px4fmu-v2_default.mk +++ b/makefiles/config_px4fmu-v2_default.mk @@ -60,6 +60,7 @@ MODULES += systemcmds/tests MODULES += systemcmds/config MODULES += systemcmds/nshterm MODULES += systemcmds/mtd +MODULES += systemcmds/hw_ver # # General system control diff --git a/makefiles/config_px4fmu-v2_test.mk b/makefiles/config_px4fmu-v2_test.mk index f54a4d825..d5a50cfae 100644 --- a/makefiles/config_px4fmu-v2_test.mk +++ b/makefiles/config_px4fmu-v2_test.mk @@ -23,6 +23,7 @@ MODULES += systemcmds/reboot MODULES += systemcmds/tests MODULES += systemcmds/nshterm MODULES += systemcmds/mtd +MODULES += systemcmds/hw_ver # # Library modules diff --git a/nuttx-configs/px4fmu-v1/include/board.h b/nuttx-configs/px4fmu-v1/include/board.h index 27ace4b7d..ff1c63424 100644 --- a/nuttx-configs/px4fmu-v1/include/board.h +++ b/nuttx-configs/px4fmu-v1/include/board.h @@ -246,14 +246,14 @@ * * There are sensors on SPI1, and SPI3 is connected to the microSD slot. */ -#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 -#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 -#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 - -#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2 -#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_1 -#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2 -#define GPIO_SPI3_NSS GPIO_SPI3_NSS_2 +#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz) +#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz) +#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz) + +#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_2|GPIO_SPEED_50MHz) +#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_1|GPIO_SPEED_50MHz) +#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_2|GPIO_SPEED_50MHz) +#define GPIO_SPI3_NSS (GPIO_SPI3_NSS_2|GPIO_SPEED_50MHz) /* SPI DMA configuration for SPI3 (microSD) */ #define DMACHAN_SPI3_RX DMAMAP_SPI3_RX_1 diff --git a/nuttx-configs/px4fmu-v2/include/board.h b/nuttx-configs/px4fmu-v2/include/board.h index 507df70a2..e56b14ba4 100755 --- a/nuttx-configs/px4fmu-v2/include/board.h +++ b/nuttx-configs/px4fmu-v2/include/board.h @@ -260,13 +260,13 @@ * * There are sensors on SPI1, and SPI2 is connected to the FRAM. */ -#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 -#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 -#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 +#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz) +#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz) +#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz) -#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 -#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 -#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 +#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz) +#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz) +#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz) /************************************************************************************ * Public Data diff --git a/src/drivers/airspeed/airspeed.cpp b/src/drivers/airspeed/airspeed.cpp index 5e45cc936..f73a3ef01 100644 --- a/src/drivers/airspeed/airspeed.cpp +++ b/src/drivers/airspeed/airspeed.cpp @@ -91,7 +91,7 @@ Airspeed::Airspeed(int bus, int address, unsigned conversion_interval) : _comms_errors(perf_alloc(PC_COUNT, "airspeed_comms_errors")) { // enable debug() calls - _debug_enabled = true; + _debug_enabled = false; // work_cancel in the dtor will explode if we don't do this... memset(&_work, 0, sizeof(_work)); diff --git a/src/drivers/boards/px4fmu-v2/board_config.h b/src/drivers/boards/px4fmu-v2/board_config.h index 264d911f3..7cfca7656 100644 --- a/src/drivers/boards/px4fmu-v2/board_config.h +++ b/src/drivers/boards/px4fmu-v2/board_config.h @@ -75,7 +75,7 @@ __BEGIN_DECLS /* PX4FMU GPIOs ***********************************************************************************/ /* LEDs */ -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12) +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12) /* External interrupts */ #define GPIO_EXTI_GYRO_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN0) diff --git a/src/drivers/boards/px4io-v1/board_config.h b/src/drivers/boards/px4io-v1/board_config.h index c3f39addf..1be4877ba 100644 --- a/src/drivers/boards/px4io-v1/board_config.h +++ b/src/drivers/boards/px4io-v1/board_config.h @@ -58,11 +58,11 @@ /* PX4IO GPIOs **********************************************************************/ /* LEDs */ -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\ GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14) -#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ +#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\ GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15) -#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ +#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\ GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10) /* Safety switch button *************************************************************/ diff --git a/src/drivers/boards/px4io-v2/board_config.h b/src/drivers/boards/px4io-v2/board_config.h index 8da555211..ef9bb5cad 100644 --- a/src/drivers/boards/px4io-v2/board_config.h +++ b/src/drivers/boards/px4io-v2/board_config.h @@ -74,9 +74,9 @@ /* LEDS **********************************************************************/ -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14) -#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15) -#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13) +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14) +#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15) +#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13) /* Safety switch button *******************************************************/ @@ -114,7 +114,7 @@ /* XXX these should be UART pins */ #define GPIO_SBUS_INPUT (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN11) #define GPIO_SBUS_OUTPUT (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10) -#define GPIO_SBUS_OENABLE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN4) +#define GPIO_SBUS_OENABLE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN4) /* * High-resolution timer diff --git a/src/drivers/boards/px4io-v2/px4iov2_init.c b/src/drivers/boards/px4io-v2/px4iov2_init.c index ccd01edf5..9f8c0eeb2 100644 --- a/src/drivers/boards/px4io-v2/px4iov2_init.c +++ b/src/drivers/boards/px4io-v2/px4iov2_init.c @@ -124,8 +124,6 @@ __EXPORT void stm32_boardinitialize(void) stm32_configgpio(GPIO_ADC_VSERVO); stm32_configgpio(GPIO_SBUS_INPUT); /* xxx alternate function */ - - stm32_gpiowrite(GPIO_SBUS_OUTPUT, false); stm32_configgpio(GPIO_SBUS_OUTPUT); /* sbus output enable is active low - disable it by default */ diff --git a/src/drivers/drv_pwm_output.h b/src/drivers/drv_pwm_output.h index 53065f8eb..c3eea310f 100644 --- a/src/drivers/drv_pwm_output.h +++ b/src/drivers/drv_pwm_output.h @@ -189,6 +189,10 @@ ORB_DECLARE(output_pwm); /** get the maximum PWM value the output will send */ #define PWM_SERVO_GET_MAX_PWM _IOC(_PWM_SERVO_BASE, 19) +/** set the number of servos in (unsigned)arg - allows change of + * split between servos and GPIO */ +#define PWM_SERVO_SET_COUNT _IOC(_PWM_SERVO_BASE, 20) + /** set the lockdown override flag to enable outputs in HIL */ #define PWM_SERVO_SET_DISABLE_LOCKDOWN _IOC(_PWM_SERVO_BASE, 21) diff --git a/src/drivers/drv_rc_input.h b/src/drivers/drv_rc_input.h index 6b87141e9..20763e265 100644 --- a/src/drivers/drv_rc_input.h +++ b/src/drivers/drv_rc_input.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -63,6 +63,11 @@ #define RC_INPUT_MAX_CHANNELS 18 /** + * Maximum RSSI value + */ +#define RC_INPUT_RSSI_MAX 255 + +/** * Input signal type, value is a control position from zero to 100 * percent. */ @@ -83,8 +88,11 @@ enum RC_INPUT_SOURCE { * on the board involved. */ struct rc_input_values { - /** decoding time */ - uint64_t timestamp; + /** publication time */ + uint64_t timestamp_publication; + + /** last valid reception time */ + uint64_t timestamp_last_signal; /** number of channels actually being seen */ uint32_t channel_count; @@ -92,6 +100,40 @@ struct rc_input_values { /** receive signal strength indicator (RSSI): < 0: Undefined, 0: no signal, 255: full reception */ int32_t rssi; + /** + * explicit failsafe flag: true on TX failure or TX out of range , false otherwise. + * Only the true state is reliable, as there are some (PPM) receivers on the market going + * into failsafe without telling us explicitly. + * */ + bool rc_failsafe; + + /** + * RC receiver connection status: True,if no frame has arrived in the expected time, false otherwise. + * True usally means that the receiver has been disconnected, but can also indicate a radio link loss on "stupid" systems. + * Will remain false, if a RX with failsafe option continues to transmit frames after a link loss. + * */ + bool rc_lost; + + /** + * Number of lost RC frames. + * Note: intended purpose: observe the radio link quality if RSSI is not available + * This value must not be used to trigger any failsafe-alike funtionality. + * */ + uint16_t rc_lost_frame_count; + + /** + * Number of total RC frames. + * Note: intended purpose: observe the radio link quality if RSSI is not available + * This value must not be used to trigger any failsafe-alike funtionality. + * */ + uint16_t rc_total_frame_count; + + /** + * Length of a single PPM frame. + * Zero for non-PPM systems + */ + uint16_t rc_ppm_frame_length; + /** Input source */ enum RC_INPUT_SOURCE input_source; @@ -107,8 +149,12 @@ ORB_DECLARE(input_rc); #define _RC_INPUT_BASE 0x2b00 /** Fetch R/C input values into (rc_input_values *)arg */ - #define RC_INPUT_GET _IOC(_RC_INPUT_BASE, 0) +/** Enable RSSI input via ADC */ +#define RC_INPUT_ENABLE_RSSI_ANALOG _IOC(_RC_INPUT_BASE, 1) + +/** Enable RSSI input via PWM signal */ +#define RC_INPUT_ENABLE_RSSI_PWM _IOC(_RC_INPUT_BASE, 2) #endif /* _DRV_RC_INPUT_H */ diff --git a/src/drivers/drv_sbus.h b/src/drivers/drv_sbus.h new file mode 100644 index 000000000..927c904ec --- /dev/null +++ b/src/drivers/drv_sbus.h @@ -0,0 +1,58 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file drv_sbus.h + * + * Futaba S.BUS / S.BUS 2 compatible interface. + */ + +#ifndef _DRV_SBUS_H +#define _DRV_SBUS_H + +#include <stdint.h> +#include <sys/ioctl.h> + +#include "drv_orb_dev.h" + +/** + * Path for the default S.BUS device + */ +#define SBUS_DEVICE_PATH "/dev/sbus" + +#define _SBUS_BASE 0x2c00 + +/** Enable S.BUS version 1 / 2 output (0 to disable) */ +#define SBUS_SET_PROTO_VERSION _IOC(_SBUS_BASE, 0) + +#endif /* _DRV_SBUS_H */ diff --git a/src/drivers/gps/gps.cpp b/src/drivers/gps/gps.cpp index 6b72d560f..f2faf711b 100644 --- a/src/drivers/gps/gps.cpp +++ b/src/drivers/gps/gps.cpp @@ -209,7 +209,7 @@ GPS::init() goto out; /* start the GPS driver worker task */ - _task = task_create("gps", SCHED_PRIORITY_SLOW_DRIVER, 2048, (main_t)&GPS::task_main_trampoline, nullptr); + _task = task_create("gps", SCHED_PRIORITY_SLOW_DRIVER, 1280, (main_t)&GPS::task_main_trampoline, nullptr); if (_task < 0) { warnx("task start failed: %d", errno); diff --git a/src/drivers/hmc5883/hmc5883.cpp b/src/drivers/hmc5883/hmc5883.cpp index d3b99ae66..9b9c11af2 100644 --- a/src/drivers/hmc5883/hmc5883.cpp +++ b/src/drivers/hmc5883/hmc5883.cpp @@ -849,42 +849,24 @@ HMC5883::collect() /* scale values for output */ - /* - * 1) Scale raw value to SI units using scaling from datasheet. - * 2) Subtract static offset (in SI units) - * 3) Scale the statically calibrated values with a linear - * dynamically obtained factor - * - * Note: the static sensor offset is the number the sensor outputs - * at a nominally 'zero' input. Therefore the offset has to - * be subtracted. - * - * Example: A gyro outputs a value of 74 at zero angular rate - * the offset is 74 from the origin and subtracting - * 74 from all measurements centers them around zero. - */ - #ifdef PX4_I2C_BUS_ONBOARD if (_bus == PX4_I2C_BUS_ONBOARD) { - /* to align the sensor axes with the board, x and y need to be flipped */ - new_report.x = ((report.y * _range_scale) - _scale.x_offset) * _scale.x_scale; - /* flip axes and negate value for y */ - new_report.y = ((-report.x * _range_scale) - _scale.y_offset) * _scale.y_scale; - /* z remains z */ - new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale; - } else { -#endif - /* the standard external mag by 3DR has x pointing to the right, y pointing backwards, and z down, - * therefore switch x and y and invert y */ - new_report.x = ((-report.y * _range_scale) - _scale.x_offset) * _scale.x_scale; - /* flip axes and negate value for y */ - new_report.y = ((report.x * _range_scale) - _scale.y_offset) * _scale.y_scale; - /* z remains z */ - new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale; -#ifdef PX4_I2C_BUS_ONBOARD - } + // convert onboard so it matches offboard for the + // scaling below + report.y = -report.y; + report.x = -report.x; + } #endif + /* the standard external mag by 3DR has x pointing to the + * right, y pointing backwards, and z down, therefore switch x + * and y and invert y */ + new_report.x = ((-report.y * _range_scale) - _scale.x_offset) * _scale.x_scale; + /* flip axes and negate value for y */ + new_report.y = ((report.x * _range_scale) - _scale.y_offset) * _scale.y_scale; + /* z remains z */ + new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale; + if (_mag_topic != -1) { /* publish it */ orb_publish(ORB_ID(sensor_mag), _mag_topic, &new_report); @@ -910,6 +892,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) struct mag_report report; ssize_t sz; int ret = 1; + uint8_t good_count = 0; // XXX do something smarter here int fd = (int)enable; @@ -932,31 +915,16 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) 1.0f, }; - float avg_excited[3] = {0.0f, 0.0f, 0.0f}; - unsigned i; + float sum_excited[3] = {0.0f, 0.0f, 0.0f}; - warnx("starting mag scale calibration"); + /* expected axis scaling. The datasheet says that 766 will + * be places in the X and Y axes and 713 in the Z + * axis. Experiments show that in fact 766 is placed in X, + * and 713 in Y and Z. This is relative to a base of 660 + * LSM/Ga, giving 1.16 and 1.08 */ + float expected_cal[3] = { 1.16f, 1.08f, 1.08f }; - /* do a simple demand read */ - sz = read(filp, (char *)&report, sizeof(report)); - - if (sz != sizeof(report)) { - warn("immediate read failed"); - ret = 1; - goto out; - } - - warnx("current measurement: %.6f %.6f %.6f", (double)report.x, (double)report.y, (double)report.z); - warnx("time: %lld", report.timestamp); - warnx("sampling 500 samples for scaling offset"); - - /* set the queue depth to 10 */ - /* don't do this for now, it can lead to a crash in start() respectively work_queue() */ -// if (OK != ioctl(filp, SENSORIOCSQUEUEDEPTH, 10)) { -// warn("failed to set queue depth"); -// ret = 1; -// goto out; -// } + warnx("starting mag scale calibration"); /* start the sensor polling at 50 Hz */ if (OK != ioctl(filp, SENSORIOCSPOLLRATE, 50)) { @@ -965,8 +933,9 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) goto out; } - /* Set to 2.5 Gauss */ - if (OK != ioctl(filp, MAGIOCSRANGE, 2)) { + /* Set to 2.5 Gauss. We ask for 3 to get the right part of + * the chained if statement above. */ + if (OK != ioctl(filp, MAGIOCSRANGE, 3)) { warnx("failed to set 2.5 Ga range"); ret = 1; goto out; @@ -990,8 +959,8 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) goto out; } - /* read the sensor 10x and report each value */ - for (i = 0; i < 500; i++) { + // discard 10 samples to let the sensor settle + for (uint8_t i = 0; i < 10; i++) { struct pollfd fds; /* wait for data to be ready */ @@ -1009,32 +978,69 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) if (sz != sizeof(report)) { warn("periodic read failed"); + ret = -EIO; goto out; + } + } - } else { - avg_excited[0] += report.x; - avg_excited[1] += report.y; - avg_excited[2] += report.z; + /* read the sensor up to 50x, stopping when we have 10 good values */ + for (uint8_t i = 0; i < 50 && good_count < 10; i++) { + struct pollfd fds; + + /* wait for data to be ready */ + fds.fd = fd; + fds.events = POLLIN; + ret = ::poll(&fds, 1, 2000); + + if (ret != 1) { + warn("timed out waiting for sensor data"); + goto out; + } + + /* now go get it */ + sz = ::read(fd, &report, sizeof(report)); + + if (sz != sizeof(report)) { + warn("periodic read failed"); + ret = -EIO; + goto out; + } + float cal[3] = {fabsf(expected_cal[0] / report.x), + fabsf(expected_cal[1] / report.y), + fabsf(expected_cal[2] / report.z)}; + + if (cal[0] > 0.7f && cal[0] < 1.35f && + cal[1] > 0.7f && cal[1] < 1.35f && + cal[2] > 0.7f && cal[2] < 1.35f) { + good_count++; + sum_excited[0] += cal[0]; + sum_excited[1] += cal[1]; + sum_excited[2] += cal[2]; } //warnx("periodic read %u", i); //warnx("measurement: %.6f %.6f %.6f", (double)report.x, (double)report.y, (double)report.z); + //warnx("cal: %.6f %.6f %.6f", (double)cal[0], (double)cal[1], (double)cal[2]); } - avg_excited[0] /= i; - avg_excited[1] /= i; - avg_excited[2] /= i; + if (good_count < 5) { + warn("failed calibration"); + ret = -EIO; + goto out; + } - warnx("done. Performed %u reads", i); - warnx("measurement avg: %.6f %.6f %.6f", (double)avg_excited[0], (double)avg_excited[1], (double)avg_excited[2]); +#if 0 + warnx("measurement avg: %.6f %.6f %.6f", + (double)sum_excited[0]/good_count, + (double)sum_excited[1]/good_count, + (double)sum_excited[2]/good_count); +#endif float scaling[3]; - /* calculate axis scaling */ - scaling[0] = fabsf(1.16f / avg_excited[0]); - /* second axis inverted */ - scaling[1] = fabsf(1.16f / -avg_excited[1]); - scaling[2] = fabsf(1.08f / avg_excited[2]); + scaling[0] = sum_excited[0] / good_count; + scaling[1] = sum_excited[1] / good_count; + scaling[2] = sum_excited[2] / good_count; warnx("axes scaling: %.6f %.6f %.6f", (double)scaling[0], (double)scaling[1], (double)scaling[2]); @@ -1165,6 +1171,8 @@ int HMC5883::set_excitement(unsigned enable) conf_reg &= ~0x03; } + // ::printf("set_excitement enable=%d regA=0x%x\n", (int)enable, (unsigned)conf_reg); + ret = write_reg(ADDR_CONF_A, conf_reg); if (OK != ret) @@ -1173,6 +1181,8 @@ int HMC5883::set_excitement(unsigned enable) uint8_t conf_reg_ret; read_reg(ADDR_CONF_A, conf_reg_ret); + //print_info(); + return !(conf_reg == conf_reg_ret); } @@ -1211,6 +1221,10 @@ HMC5883::print_info() perf_print_counter(_comms_errors); perf_print_counter(_buffer_overflows); printf("poll interval: %u ticks\n", _measure_ticks); + printf("offsets (%.2f %.2f %.2f)\n", (double)_scale.x_offset, (double)_scale.y_offset, (double)_scale.z_offset); + printf("scaling (%.2f %.2f %.2f) 1/range_scale %.2f range_ga %.2f\n", + (double)_scale.x_scale, (double)_scale.y_scale, (double)_scale.z_scale, + (double)1.0/_range_scale, (double)_range_ga); _reports->print_info("report queue"); } diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index a95c4576b..9251cff7b 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -77,7 +77,6 @@ #include <systemlib/err.h> #include <systemlib/param/param.h> #include <systemlib/perf_counter.h> -#include <mathlib/mathlib.h> #include <drivers/drv_airspeed.h> #include <drivers/drv_hrt.h> @@ -178,24 +177,17 @@ MEASAirspeed::collect() return ret; } - //uint16_t diff_pres_pa = (val[1]) | ((val[0] & ~(0xC0)) << 8); - uint16_t temp = (val[3] & 0xE0) << 8 | val[2]; - - // XXX leaving this in until new calculation method has been cross-checked - //diff_pres_pa = abs(diff_pres_pa - (16384 / 2.0f)); - //diff_pres_pa -= _diff_pres_offset; int16_t dp_raw = 0, dT_raw = 0; dp_raw = (val[0] << 8) + val[1]; - dp_raw = 0x3FFF & dp_raw; //mask the used bits + /* mask the used bits */ + dp_raw = 0x3FFF & dp_raw; dT_raw = (val[2] << 8) + val[3]; dT_raw = (0xFFE0 & dT_raw) >> 5; float temperature = ((200 * dT_raw) / 2047) - 50; - // XXX we may want to smooth out the readings to remove noise. - - // Calculate differential pressure. As its centered around 8000 - // and can go positive or negative, enforce absolute value -// uint16_t diff_press_pa = abs(dp_raw - (16384 / 2.0f)); + /* calculate differential pressure. As its centered around 8000 + * and can go positive or negative, enforce absolute value + */ const float P_min = -1.0f; const float P_max = 1.0f; float diff_press_pa = fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset; @@ -204,7 +196,7 @@ MEASAirspeed::collect() struct differential_pressure_s report; - // Track maximum differential pressure measured (so we can work out top speed). + /* track maximum differential pressure measured (so we can work out top speed). */ if (diff_press_pa > _max_differential_pressure_pa) { _max_differential_pressure_pa = diff_press_pa; } @@ -392,7 +384,7 @@ test() err(1, "immediate read failed"); warnx("single read"); - warnx("diff pressure: %d pa", report.differential_pressure_pa); + warnx("diff pressure: %d pa", (double)report.differential_pressure_pa); /* start the sensor polling at 2Hz */ if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index 4b1b0ed0b..0fbd84924 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -626,7 +626,7 @@ PX4FMU::task_main() #ifdef HRT_PPM_CHANNEL // see if we have new PPM input data - if (ppm_last_valid_decode != rc_in.timestamp) { + if (ppm_last_valid_decode != rc_in.timestamp_last_signal) { // we have a new PPM frame. Publish it. rc_in.channel_count = ppm_decoded_channels; @@ -638,7 +638,15 @@ PX4FMU::task_main() rc_in.values[i] = ppm_buffer[i]; } - rc_in.timestamp = ppm_last_valid_decode; + rc_in.timestamp_publication = ppm_last_valid_decode; + rc_in.timestamp_last_signal = ppm_last_valid_decode; + + rc_in.rc_ppm_frame_length = ppm_frame_length; + rc_in.rssi = RC_INPUT_RSSI_MAX; + rc_in.rc_failsafe = false; + rc_in.rc_lost = false; + rc_in.rc_lost_frame_count = 0; + rc_in.rc_total_frame_count = 0; /* lazily advertise on first publication */ if (to_input_rc == 0) { @@ -1006,6 +1014,40 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; + case PWM_SERVO_SET_COUNT: { + /* change the number of outputs that are enabled for + * PWM. This is used to change the split between GPIO + * and PWM under control of the flight config + * parameters. Note that this does not allow for + * changing a set of pins to be used for serial on + * FMUv1 + */ + switch (arg) { + case 0: + set_mode(MODE_NONE); + break; + + case 2: + set_mode(MODE_2PWM); + break; + + case 4: + set_mode(MODE_4PWM); + break; + +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + case 6: + set_mode(MODE_6PWM); + break; +#endif + + default: + ret = -EINVAL; + break; + } + break; + } + case MIXERIOCRESET: if (_mixers != nullptr) { delete _mixers; @@ -1443,7 +1485,6 @@ void sensor_reset(int ms) { int fd; - int ret; fd = open(PX4FMU_DEVICE_PATH, O_RDWR); diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 658bcd8d8..5da288661 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -61,6 +61,7 @@ #include <drivers/device/device.h> #include <drivers/drv_rc_input.h> #include <drivers/drv_pwm_output.h> +#include <drivers/drv_sbus.h> #include <drivers/drv_gpio.h> #include <drivers/drv_hrt.h> #include <drivers/drv_mixer.h> @@ -238,6 +239,7 @@ private: unsigned _update_interval; ///< Subscription interval limiting send rate bool _rc_handling_disabled; ///< If set, IO does not evaluate, but only forward the RC values unsigned _rc_chan_count; ///< Internal copy of the last seen number of RC channels + uint64_t _rc_last_valid; ///< last valid timestamp volatile int _task; ///< worker task id volatile bool _task_should_exit; ///< worker terminate flag @@ -270,7 +272,8 @@ private: orb_advert_t _to_servorail; ///< servorail status orb_advert_t _to_safety; ///< status of safety - actuator_outputs_s _outputs; ///<mixed outputs + actuator_outputs_s _outputs; ///< mixed outputs + servorail_status_s _servorail_status; ///< servorail status bool _primary_pwm_device; ///< true if we are the default PWM output bool _lockdown_override; ///< allow to override the safety lockdown @@ -444,14 +447,14 @@ private: * @param vservo vservo register * @param vrssi vrssi register */ - void io_handle_vservo(uint16_t vbatt, uint16_t ibatt); + void io_handle_vservo(uint16_t vservo, uint16_t vrssi); }; namespace { -PX4IO *g_dev; +PX4IO *g_dev = nullptr; } @@ -467,6 +470,7 @@ PX4IO::PX4IO(device::Device *interface) : _update_interval(0), _rc_handling_disabled(false), _rc_chan_count(0), + _rc_last_valid(0), _task(-1), _task_should_exit(false), _mavlink_fd(-1), @@ -506,7 +510,8 @@ PX4IO::PX4IO(device::Device *interface) : /* open MAVLink text channel */ _mavlink_fd = ::open(MAVLINK_LOG_DEVICE, 0); - _debug_enabled = true; + _debug_enabled = false; + _servorail_status.rssi_v = 0; } PX4IO::~PX4IO() @@ -580,6 +585,12 @@ PX4IO::init() /* get some parameters */ unsigned protocol = io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_PROTOCOL_VERSION); + if (protocol == _io_reg_get_error) { + log("failed to communicate with IO"); + mavlink_log_emergency(_mavlink_fd, "[IO] failed to communicate with IO, abort."); + return -1; + } + if (protocol != PX4IO_PROTOCOL_VERSION) { log("protocol/firmware mismatch"); mavlink_log_emergency(_mavlink_fd, "[IO] protocol/firmware mismatch, abort."); @@ -750,7 +761,7 @@ PX4IO::init() } /* start the IO interface task */ - _task = task_create("px4io", SCHED_PRIORITY_ACTUATOR_OUTPUTS, 2048, (main_t)&PX4IO::task_main_trampoline, nullptr); + _task = task_create("px4io", SCHED_PRIORITY_ACTUATOR_OUTPUTS, 1024, (main_t)&PX4IO::task_main_trampoline, nullptr); if (_task < 0) { debug("task start failed: %d", errno); @@ -774,8 +785,6 @@ PX4IO::task_main() hrt_abstime poll_last = 0; hrt_abstime orb_check_last = 0; - log("starting"); - _thread_mavlink_fd = ::open(MAVLINK_LOG_DEVICE, 0); /* @@ -809,8 +818,6 @@ PX4IO::task_main() fds[0].fd = _t_actuator_controls_0; fds[0].events = POLLIN; - log("ready"); - /* lock against the ioctl handler */ lock(); @@ -1308,6 +1315,7 @@ PX4IO::io_handle_battery(uint16_t vbatt, uint16_t ibatt) /* voltage is scaled to mV */ battery_status.voltage_v = vbatt / 1000.0f; + battery_status.voltage_filtered_v = vbatt / 1000.0f; /* ibatt contains the raw ADC count, as 12 bit ADC @@ -1339,19 +1347,18 @@ PX4IO::io_handle_battery(uint16_t vbatt, uint16_t ibatt) void PX4IO::io_handle_vservo(uint16_t vservo, uint16_t vrssi) { - servorail_status_s servorail_status; - servorail_status.timestamp = hrt_absolute_time(); + _servorail_status.timestamp = hrt_absolute_time(); /* voltage is scaled to mV */ - servorail_status.voltage_v = vservo * 0.001f; - servorail_status.rssi_v = vrssi * 0.001f; + _servorail_status.voltage_v = vservo * 0.001f; + _servorail_status.rssi_v = vrssi * 0.001f; /* lazily publish the servorail voltages */ if (_to_servorail > 0) { - orb_publish(ORB_ID(servorail_status), _to_servorail, &servorail_status); + orb_publish(ORB_ID(servorail_status), _to_servorail, &_servorail_status); } else { - _to_servorail = orb_advertise(ORB_ID(servorail_status), &servorail_status); + _to_servorail = orb_advertise(ORB_ID(servorail_status), &_servorail_status); } } @@ -1361,7 +1368,10 @@ PX4IO::io_get_status() uint16_t regs[6]; int ret; - /* get STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT in that order */ + /* get + * STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT, + * STATUS_VSERVO, STATUS_VRSSI, STATUS_PRSSI + * in that order */ ret = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS, ®s[0], sizeof(regs) / sizeof(regs[0])); if (ret != OK) @@ -1398,7 +1408,8 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) * * This should be the common case (9 channel R/C control being a reasonable upper bound). */ - input_rc.timestamp = hrt_absolute_time(); + input_rc.timestamp_publication = hrt_absolute_time(); + ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_COUNT, ®s[0], prolog + 9); if (ret != OK) @@ -1408,13 +1419,25 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) * Get the channel count any any extra channels. This is no more expensive than reading the * channel count once. */ - channel_count = regs[0]; + channel_count = regs[PX4IO_P_RAW_RC_COUNT]; if (channel_count != _rc_chan_count) perf_count(_perf_chan_count); _rc_chan_count = channel_count; + input_rc.rc_ppm_frame_length = regs[PX4IO_P_RAW_RC_DATA]; + input_rc.rssi = regs[PX4IO_P_RAW_RC_NRSSI]; + input_rc.rc_failsafe = (regs[PX4IO_P_RAW_RC_FLAGS] & PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + input_rc.rc_lost_frame_count = regs[PX4IO_P_RAW_LOST_FRAME_COUNT]; + input_rc.rc_total_frame_count = regs[PX4IO_P_RAW_FRAME_COUNT]; + + /* rc_lost has to be set before the call to this function */ + if (!input_rc.rc_lost && !input_rc.rc_failsafe) + _rc_last_valid = input_rc.timestamp_publication; + + input_rc.timestamp_last_signal = _rc_last_valid; + if (channel_count > 9) { ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_BASE + 9, ®s[prolog + 9], channel_count - 9); @@ -1431,13 +1454,12 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) int PX4IO::io_publish_raw_rc() { - /* if no raw RC, just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK)) - return OK; /* fetch values from IO */ rc_input_values rc_val; - rc_val.timestamp = hrt_absolute_time(); + + /* set the RC status flag ORDER MATTERS! */ + rc_val.rc_lost = !(_status & PX4IO_P_STATUS_FLAGS_RC_OK); int ret = io_get_raw_rc_input(rc_val); @@ -1456,6 +1478,11 @@ PX4IO::io_publish_raw_rc() } else { rc_val.input_source = RC_INPUT_SOURCE_UNKNOWN; + + /* we do not know the RC input, only publish if RC OK flag is set */ + /* if no raw RC, just don't publish */ + if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK)) + return OK; } /* lazily advertise on first publication */ @@ -1672,7 +1699,18 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries) total_len++; } - int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, total_len / 2); + int ret; + + for (int i = 0; i < 30; i++) { + /* failed, but give it a 2nd shot */ + ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, total_len / 2); + + if (ret) { + usleep(333); + } else { + break; + } + } /* print mixer chunk */ if (debuglevel > 5 || ret) { @@ -1696,7 +1734,18 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries) msg->text[0] = '\n'; msg->text[1] = '\0'; - int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2); + int ret; + + for (int i = 0; i < 30; i++) { + /* failed, but give it a 2nd shot */ + ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2); + + if (ret) { + usleep(333); + } else { + break; + } + } if (ret) return ret; @@ -1742,15 +1791,14 @@ PX4IO::print_status() printf("%u bytes free\n", io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FREEMEM)); uint16_t flags = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS); - printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + uint16_t io_status_flags = flags; + printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s\n", flags, ((flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED) ? " OUTPUTS_ARMED" : ""), ((flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) ? " SAFETY_OFF" : " SAFETY_SAFE"), ((flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) ? " OVERRIDE" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_OK) ? " RC_OK" : " RC_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RC_PPM) ? " PPM" : ""), - (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_STATUS_FLAGS_RC_DSM11))) ? " DSM10" : ""), - (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_STATUS_FLAGS_RC_DSM11)) ? " DSM11" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_SBUS) ? " SBUS" : ""), ((flags & PX4IO_P_STATUS_FLAGS_FMU_OK) ? " FMU_OK" : " FMU_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) ? " RAW_PWM_PASSTHROUGH" : ""), @@ -1809,8 +1857,17 @@ PX4IO::print_status() printf("\n"); - if (raw_inputs > 0) { - int frame_len = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_RC_DATA); + flags = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_FLAGS); + printf("R/C flags: 0x%04x%s%s%s%s%s\n", flags, + (((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11))) ? " DSM10" : ""), + (((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11)) ? " DSM11" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_FRAME_DROP) ? " FRAME_DROP" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) ? " FAILSAFE" : ""), + ((flags & PX4IO_P_RAW_RC_FLAGS_MAPPING_OK) ? " MAPPING_OK" : "") + ); + + if ((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_PPM)) { + int frame_len = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_DATA); printf("RC data (PPM frame len) %u us\n", frame_len); if ((frame_len - raw_inputs * 2000 - 3000) < 0) { @@ -1836,7 +1893,13 @@ PX4IO::print_status() printf("\n"); /* setup and state */ - printf("features 0x%04x\n", io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES)); + uint16_t features = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES); + printf("features 0x%04x%s%s%s%s\n", features, + ((features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) ? " S.BUS1_OUT" : ""), + ((features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) ? " S.BUS2_OUT" : ""), + ((features & PX4IO_P_SETUP_FEATURES_PWM_RSSI) ? " RSSI_PWM" : ""), + ((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "") + ); uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING); printf("arming 0x%04x%s%s%s%s%s%s%s\n", arming, @@ -2267,6 +2330,38 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg) break; + case RC_INPUT_ENABLE_RSSI_ANALOG: + + if (arg) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_ADC_RSSI); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_ADC_RSSI, 0); + } + + break; + + case RC_INPUT_ENABLE_RSSI_PWM: + + if (arg) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_PWM_RSSI); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_PWM_RSSI, 0); + } + + break; + + case SBUS_SET_PROTO_VERSION: + + if (arg == 1) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS1_OUT); + } else if (arg == 2) { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS2_OUT); + } else { + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT), 0); + } + + break; + default: /* not a recognized value */ ret = -ENOTTY; @@ -2375,8 +2470,10 @@ start(int argc, char *argv[]) /* create the driver - it will set g_dev */ (void)new PX4IO(interface); - if (g_dev == nullptr) + if (g_dev == nullptr) { + delete interface; errx(1, "driver alloc failed"); + } if (OK != g_dev->init()) { delete g_dev; @@ -2638,7 +2735,7 @@ monitor(void) /* clear screen */ printf("\033[2J"); - unsigned cancels = 3; + unsigned cancels = 2; for (;;) { pollfd fds[1]; @@ -2652,17 +2749,17 @@ monitor(void) read(0, &c, 1); if (cancels-- == 0) { - printf("\033[H"); /* move cursor home and clear screen */ + printf("\033[2J\033[H"); /* move cursor home and clear screen */ exit(0); } } if (g_dev != nullptr) { - printf("\033[H"); /* move cursor home and clear screen */ + printf("\033[2J\033[H"); /* move cursor home and clear screen */ (void)g_dev->print_status(); (void)g_dev->print_debug(); - printf("[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n"); + printf("\n\n\n[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n"); } else { errx(1, "driver not loaded, exiting"); @@ -2764,6 +2861,7 @@ px4io_main(int argc, char *argv[]) printf("[px4io] loaded, detaching first\n"); /* stop the driver */ delete g_dev; + g_dev = nullptr; } PX4IO_Uploader *up; @@ -2836,18 +2934,30 @@ px4io_main(int argc, char *argv[]) } if (g_dev == nullptr) { warnx("px4io is not started, still attempting upgrade"); - } else { - uint16_t arg = atol(argv[2]); - int ret = g_dev->ioctl(nullptr, PX4IO_REBOOT_BOOTLOADER, arg); - if (ret != OK) { - printf("reboot failed - %d\n", ret); - exit(1); + + /* allocate the interface */ + device::Device *interface = get_interface(); + + /* create the driver - it will set g_dev */ + (void)new PX4IO(interface); + + if (g_dev == nullptr) { + delete interface; + errx(1, "driver alloc failed"); } + } - // tear down the px4io instance - delete g_dev; + uint16_t arg = atol(argv[2]); + int ret = g_dev->ioctl(nullptr, PX4IO_REBOOT_BOOTLOADER, arg); + if (ret != OK) { + printf("reboot failed - %d\n", ret); + exit(1); } + // tear down the px4io instance + delete g_dev; + g_dev = nullptr; + // upload the specified firmware const char *fn[2]; fn[0] = argv[3]; @@ -2905,6 +3015,7 @@ px4io_main(int argc, char *argv[]) /* stop the driver */ delete g_dev; + g_dev = nullptr; exit(0); } @@ -2962,6 +3073,60 @@ px4io_main(int argc, char *argv[]) if (!strcmp(argv[1], "lockdown")) lockdown(argc, argv); + if (!strcmp(argv[1], "sbus1_out")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 1); + + if (ret != 0) { + errx(ret, "S.BUS v1 failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "sbus2_out")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 2); + + if (ret != 0) { + errx(ret, "S.BUS v2 failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "rssi_analog")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_ANALOG, 1); + + if (ret != 0) { + errx(ret, "RSSI analog failed"); + } + + exit(0); + } + + if (!strcmp(argv[1], "rssi_pwm")) { + /* we can cheat and call the driver directly, as it + * doesn't reference filp in ioctl() + */ + int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_PWM, 1); + + if (ret != 0) { + errx(ret, "RSSI PWM failed"); + } + + exit(0); + } + out: - errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind', 'checkcrc', 'forceupdate' or 'update'"); + errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug <level>',\n" + "'recovery', 'limit <rate>', 'current', 'bind', 'checkcrc',\n" + "'forceupdate', 'update', 'sbus1_out', 'sbus2_out', 'rssi_analog' or 'rssi_pwm'"); } diff --git a/src/drivers/px4io/px4io_uploader.cpp b/src/drivers/px4io/px4io_uploader.cpp index 41f93a8ee..dd8abbac5 100644 --- a/src/drivers/px4io/px4io_uploader.cpp +++ b/src/drivers/px4io/px4io_uploader.cpp @@ -51,6 +51,7 @@ #include <poll.h> #include <termios.h> #include <sys/stat.h> +#include <nuttx/arch.h> #include <crc32.h> @@ -120,8 +121,15 @@ PX4IO_Uploader::upload(const char *filenames[]) cfsetspeed(&t, 115200); tcsetattr(_io_fd, TCSANOW, &t); - /* look for the bootloader */ - ret = sync(); + /* look for the bootloader for 150 ms */ + for (int i = 0; i < 15; i++) { + ret = sync(); + if (ret == OK) { + break; + } else { + usleep(10000); + } + } if (ret != OK) { /* this is immediately fatal */ @@ -226,6 +234,11 @@ PX4IO_Uploader::upload(const char *filenames[]) close(_fw_fd); close(_io_fd); _io_fd = -1; + + // sleep for enough time for the IO chip to boot. This makes + // forceupdate more reliably startup IO again after update + up_udelay(100*1000); + return ret; } diff --git a/src/drivers/px4io/uploader.h b/src/drivers/px4io/uploader.h index 22387a3e2..55f63eef9 100644 --- a/src/drivers/px4io/uploader.h +++ b/src/drivers/px4io/uploader.h @@ -91,7 +91,7 @@ private: void drain(); int send(uint8_t c); int send(uint8_t *p, unsigned count); - int get_sync(unsigned timeout = 1000); + int get_sync(unsigned timeout = 40); int sync(); int get_info(int param, uint32_t &val); int erase(); diff --git a/src/modules/sdlog2/sdlog2_version.h b/src/lib/version/version.h index c6a9ba638..af733aaf0 100644 --- a/src/modules/sdlog2/sdlog2_version.h +++ b/src/lib/version/version.h @@ -33,15 +33,15 @@ ****************************************************************************/ /** - * @file sdlog2_version.h + * @file version.h * * Tools for system version detection. * * @author Anton Babushkin <anton.babushkin@me.com> */ -#ifndef SDLOG2_VERSION_H_ -#define SDLOG2_VERSION_H_ +#ifndef VERSION_H_ +#define VERSION_H_ /* GIT_VERSION is defined at build time via a Makefile call to the @@ -59,4 +59,4 @@ #define HW_ARCH "PX4FMU_V2" #endif -#endif /* SDLOG2_VERSION_H_ */ +#endif /* VERSION_H_ */ diff --git a/src/mainpage.dox b/src/mainpage.dox new file mode 100644 index 000000000..7ca410341 --- /dev/null +++ b/src/mainpage.dox @@ -0,0 +1,9 @@ +/** +\mainpage PX4 Autopilot Flight Control Stack and Middleware + +This software repository offers a middleware for micro aerial vehicles capable of running efficiently on a 168 MHz Cortex M4F processor and a state of the art flight control stack supporting multicopter and fixed wing aircraft. It can be easily used for experimental air (and ground) vehicles as well, as the application on a spherical blimp shows. + +http://pixhawk.org + + +*/
\ No newline at end of file diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index 2a2bcca72..52cf25086 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -250,7 +250,7 @@ int commander_main(int argc, char *argv[]) daemon_task = task_spawn_cmd("commander", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 40, - 3000, + 2088, commander_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); @@ -685,7 +685,7 @@ int commander_thread_main(int argc, char *argv[]) pthread_attr_t commander_low_prio_attr; pthread_attr_init(&commander_low_prio_attr); - pthread_attr_setstacksize(&commander_low_prio_attr, 2992); + pthread_attr_setstacksize(&commander_low_prio_attr, 1728); struct sched_param param; (void)pthread_attr_getschedparam(&commander_low_prio_attr, ¶m); diff --git a/src/modules/mavlink/mavlink.c b/src/modules/mavlink/mavlink.c index 20853379d..ebf01a2f4 100644 --- a/src/modules/mavlink/mavlink.c +++ b/src/modules/mavlink/mavlink.c @@ -773,7 +773,7 @@ int mavlink_main(int argc, char *argv[]) mavlink_task = task_spawn_cmd("mavlink", SCHED_DEFAULT, SCHED_PRIORITY_DEFAULT, - 2048, + 1200, mavlink_thread_main, (const char **)argv); diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index 7b6fad658..9fc7b748a 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -871,7 +871,7 @@ receive_start(int uart) param.sched_priority = SCHED_PRIORITY_MAX - 40; (void)pthread_attr_setschedparam(&receiveloop_attr, ¶m); - pthread_attr_setstacksize(&receiveloop_attr, 3000); + pthread_attr_setstacksize(&receiveloop_attr, 1816); pthread_t thread; pthread_create(&thread, &receiveloop_attr, receive_thread, &uart); diff --git a/src/modules/mavlink/orb_listener.c b/src/modules/mavlink/orb_listener.c index 92b1b45be..bfb824db7 100644 --- a/src/modules/mavlink/orb_listener.c +++ b/src/modules/mavlink/orb_listener.c @@ -352,10 +352,10 @@ l_input_rc(const struct listener *l) const unsigned port_width = 8; - for (unsigned i = 0; (i * port_width) < (rc_raw.channel_count + port_width); i++) { + for (unsigned i = 0; (i * port_width) < rc_raw.channel_count; i++) { /* Channels are sent in MAVLink main loop at a fixed interval */ mavlink_msg_rc_channels_raw_send(chan, - rc_raw.timestamp / 1000, + rc_raw.timestamp_publication / 1000, i, (rc_raw.channel_count > (i * port_width) + 0) ? rc_raw.values[(i * port_width) + 0] : UINT16_MAX, (rc_raw.channel_count > (i * port_width) + 1) ? rc_raw.values[(i * port_width) + 1] : UINT16_MAX, @@ -838,7 +838,7 @@ uorb_receive_start(void) pthread_attr_init(&uorb_attr); /* Set stack size, needs less than 2k */ - pthread_attr_setstacksize(&uorb_attr, 2048); + pthread_attr_setstacksize(&uorb_attr, 1648); pthread_t thread; pthread_create(&thread, &uorb_attr, uorb_receive_thread, NULL); diff --git a/src/modules/multirotor_pos_control/multirotor_pos_control.c b/src/modules/multirotor_pos_control/multirotor_pos_control.c index 3d23d0c09..a89c7eace 100644 --- a/src/modules/multirotor_pos_control/multirotor_pos_control.c +++ b/src/modules/multirotor_pos_control/multirotor_pos_control.c @@ -126,7 +126,7 @@ int multirotor_pos_control_main(int argc, char *argv[]) deamon_task = task_spawn_cmd("multirotor_pos_control", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 60, - 4096, + 2408, multirotor_pos_control_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); exit(0); diff --git a/src/modules/position_estimator_inav/position_estimator_inav_main.c b/src/modules/position_estimator_inav/position_estimator_inav_main.c index 3084b6d92..eb5a23b69 100644 --- a/src/modules/position_estimator_inav/position_estimator_inav_main.c +++ b/src/modules/position_estimator_inav/position_estimator_inav_main.c @@ -128,7 +128,7 @@ int position_estimator_inav_main(int argc, char *argv[]) thread_should_exit = false; position_estimator_inav_task = task_spawn_cmd("position_estimator_inav", - SCHED_RR, SCHED_PRIORITY_MAX - 5, 4096, + SCHED_RR, SCHED_PRIORITY_MAX - 5, 2568, position_estimator_inav_thread_main, (argv) ? (const char **) &argv[2] : (const char **) NULL); exit(0); diff --git a/src/modules/px4iofirmware/adc.c b/src/modules/px4iofirmware/adc.c index 81566eb2a..2f5908ac5 100644 --- a/src/modules/px4iofirmware/adc.c +++ b/src/modules/px4iofirmware/adc.c @@ -83,6 +83,14 @@ adc_init(void) { adc_perf = perf_alloc(PC_ELAPSED, "adc"); + /* put the ADC into power-down mode */ + rCR2 &= ~ADC_CR2_ADON; + up_udelay(10); + + /* bring the ADC out of power-down mode */ + rCR2 |= ADC_CR2_ADON; + up_udelay(10); + /* do calibration if supported */ #ifdef ADC_CR2_CAL rCR2 |= ADC_CR2_RSTCAL; @@ -96,41 +104,25 @@ adc_init(void) if (rCR2 & ADC_CR2_CAL) return -1; - #endif - /* arbitrarily configure all channels for 55 cycle sample time */ - rSMPR1 = 0b00000011011011011011011011011011; + /* + * Configure sampling time. + * + * For electrical protection reasons, we want to be able to have + * 10K in series with ADC inputs that leave the board. At 12MHz this + * means we need 28.5 cycles of sampling time (per table 43 in the + * datasheet). + */ + rSMPR1 = 0b00000000011011011011011011011011; rSMPR2 = 0b00011011011011011011011011011011; - /* XXX for F2/4, might want to select 12-bit mode? */ - rCR1 = 0; - - /* enable the temperature sensor / Vrefint channel if supported*/ - rCR2 = -#ifdef ADC_CR2_TSVREFE - /* enable the temperature sensor in CR2 */ - ADC_CR2_TSVREFE | -#endif - 0; - -#ifdef ADC_CCR_TSVREFE - /* enable temperature sensor in CCR */ - rCCR = ADC_CCR_TSVREFE; -#endif + rCR2 |= ADC_CR2_TSVREFE; /* enable the temperature sensor / Vrefint channel */ /* configure for a single-channel sequence */ rSQR1 = 0; rSQR2 = 0; - rSQR3 = 0; /* will be updated with the channel each tick */ - - /* power-cycle the ADC and turn it on */ - rCR2 &= ~ADC_CR2_ADON; - up_udelay(10); - rCR2 |= ADC_CR2_ADON; - up_udelay(10); - rCR2 |= ADC_CR2_ADON; - up_udelay(10); + rSQR3 = 0; /* will be updated with the channel at conversion time */ return 0; } @@ -141,11 +133,12 @@ adc_init(void) uint16_t adc_measure(unsigned channel) { + perf_begin(adc_perf); /* clear any previous EOC */ - if (rSR & ADC_SR_EOC) - rSR &= ~ADC_SR_EOC; + rSR = 0; + (void)rDR; /* run a single conversion right now - should take about 60 cycles (a few microseconds) max */ rSQR3 = channel; @@ -158,7 +151,6 @@ adc_measure(unsigned channel) /* never spin forever - this will give a bogus result though */ if (hrt_elapsed_time(&now) > 100) { - debug("adc timeout"); perf_end(adc_perf); return 0xffff; } @@ -166,6 +158,7 @@ adc_measure(unsigned channel) /* read the result and clear EOC */ uint16_t result = rDR; + rSR = 0; perf_end(adc_perf); return result; diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 541eed0e1..941500f0d 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -59,6 +59,11 @@ static perf_counter_t c_gather_ppm; void controls_init(void) { + /* no channels */ + r_raw_rc_count = 0; + system_state.rc_channels_timestamp_received = 0; + system_state.rc_channels_timestamp_valid = 0; + /* DSM input (USART1) */ dsm_init("/dev/ttyS0"); @@ -97,26 +102,64 @@ controls_tick() { /* receive signal strenght indicator (RSSI). 0 = no connection, 255: perfect connection */ uint16_t rssi = 0; +#ifdef ADC_RSSI + if (r_setup_features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) { + unsigned counts = adc_measure(ADC_RSSI); + if (counts != 0xffff) { + /* use 1:1 scaling on 3.3V ADC input */ + unsigned mV = counts * 3300 / 4096; + + /* scale to 0..253 */ + rssi = mV / 13; + } + } +#endif + perf_begin(c_gather_dsm); uint16_t temp_count = r_raw_rc_count; bool dsm_updated = dsm_input(r_raw_rc_values, &temp_count); if (dsm_updated) { - r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; + r_raw_rc_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; r_raw_rc_count = temp_count & 0x7fff; if (temp_count & 0x8000) - r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM11; + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_DSM11; else - r_status_flags &= ~PX4IO_P_STATUS_FLAGS_RC_DSM11; + r_raw_rc_flags &= ~PX4IO_P_RAW_RC_FLAGS_RC_DSM11; + + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); - rssi = 255; } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); - bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &rssi, PX4IO_RC_INPUT_CHANNELS); + + bool sbus_status = (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_SBUS); + + bool sbus_failsafe, sbus_frame_drop; + bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &sbus_failsafe, &sbus_frame_drop, PX4IO_RC_INPUT_CHANNELS); + if (sbus_updated) { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_SBUS; + + rssi = 255; + + if (sbus_frame_drop) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_FRAME_DROP; + rssi = 100; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); + } + + if (sbus_failsafe) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_FAILSAFE; + rssi = 0; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + } + } + perf_end(c_gather_sbus); /* @@ -125,13 +168,12 @@ controls_tick() { * disable the PPM decoder completely if we have S.bus signal. */ perf_begin(c_gather_ppm); - bool ppm_updated = ppm_input(r_raw_rc_values, &r_raw_rc_count, &r_page_status[PX4IO_P_STATUS_RC_DATA]); + bool ppm_updated = ppm_input(r_raw_rc_values, &r_raw_rc_count, &r_page_raw_rc_input[PX4IO_P_RAW_RC_DATA]); if (ppm_updated) { - /* XXX sample RSSI properly here */ - rssi = 255; - r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_PPM; + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); } perf_end(c_gather_ppm); @@ -139,6 +181,9 @@ controls_tick() { if (r_raw_rc_count > PX4IO_RC_INPUT_CHANNELS) r_raw_rc_count = PX4IO_RC_INPUT_CHANNELS; + /* store RSSI */ + r_page_raw_rc_input[PX4IO_P_RAW_RC_NRSSI] = rssi; + /* * In some cases we may have received a frame, but input has still * been lost. @@ -150,97 +195,100 @@ controls_tick() { */ if (dsm_updated || sbus_updated || ppm_updated) { - /* update RC-received timestamp */ - system_state.rc_channels_timestamp = hrt_absolute_time(); - /* record a bitmask of channels assigned */ unsigned assigned_channels = 0; - /* map raw inputs to mapped inputs */ - /* XXX mapping should be atomic relative to protocol */ - for (unsigned i = 0; i < r_raw_rc_count; i++) { - - /* map the input channel */ - uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; - - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { - - uint16_t raw = r_raw_rc_values[i]; - - int16_t scaled; - - /* - * 1) Constrain to min/max values, as later processing depends on bounds. - */ - if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) - raw = conf[PX4IO_P_RC_CONFIG_MIN]; - if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) - raw = conf[PX4IO_P_RC_CONFIG_MAX]; - - /* - * 2) Scale around the mid point differently for lower and upper range. - * - * This is necessary as they don't share the same endpoints and slope. - * - * First normalize to 0..1 range with correct sign (below or above center), - * then scale to 20000 range (if center is an actual center, -10000..10000, - * if parameters only support half range, scale to 10000 range, e.g. if - * center == min 0..10000, if center == max -10000..0). - * - * As the min and max bounds were enforced in step 1), division by zero - * cannot occur, as for the case of center == min or center == max the if - * statement is mutually exclusive with the arithmetic NaN case. - * - * DO NOT REMOVE OR ALTER STEP 1! - */ - if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); - - } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { - scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); - - } else { - /* in the configured dead zone, output zero */ - scaled = 0; - } - - /* invert channel if requested */ - if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) - scaled = -scaled; + /* update RC-received timestamp */ + system_state.rc_channels_timestamp_received = hrt_absolute_time(); + + /* do not command anything in failsafe, kick in the RC loss counter */ + if (!(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { + + /* update RC-received timestamp */ + system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received; + + /* map raw inputs to mapped inputs */ + /* XXX mapping should be atomic relative to protocol */ + for (unsigned i = 0; i < r_raw_rc_count; i++) { + + /* map the input channel */ + uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE]; + + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { + + uint16_t raw = r_raw_rc_values[i]; + + int16_t scaled; + + /* + * 1) Constrain to min/max values, as later processing depends on bounds. + */ + if (raw < conf[PX4IO_P_RC_CONFIG_MIN]) + raw = conf[PX4IO_P_RC_CONFIG_MIN]; + if (raw > conf[PX4IO_P_RC_CONFIG_MAX]) + raw = conf[PX4IO_P_RC_CONFIG_MAX]; + + /* + * 2) Scale around the mid point differently for lower and upper range. + * + * This is necessary as they don't share the same endpoints and slope. + * + * First normalize to 0..1 range with correct sign (below or above center), + * then scale to 20000 range (if center is an actual center, -10000..10000, + * if parameters only support half range, scale to 10000 range, e.g. if + * center == min 0..10000, if center == max -10000..0). + * + * As the min and max bounds were enforced in step 1), division by zero + * cannot occur, as for the case of center == min or center == max the if + * statement is mutually exclusive with the arithmetic NaN case. + * + * DO NOT REMOVE OR ALTER STEP 1! + */ + if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])); + + } else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) { + scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN])); + + } else { + /* in the configured dead zone, output zero */ + scaled = 0; + } + + /* invert channel if requested */ + if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE) + scaled = -scaled; - /* and update the scaled/mapped version */ - unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - if (mapped < PX4IO_CONTROL_CHANNELS) { + /* and update the scaled/mapped version */ + unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; + if (mapped < PX4IO_CONTROL_CHANNELS) { - /* invert channel if pitch - pulling the lever down means pitching up by convention */ - if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ - scaled = -scaled; + /* invert channel if pitch - pulling the lever down means pitching up by convention */ + if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ + scaled = -scaled; - r_rc_values[mapped] = SIGNED_TO_REG(scaled); - assigned_channels |= (1 << mapped); + r_rc_values[mapped] = SIGNED_TO_REG(scaled); + assigned_channels |= (1 << mapped); + } } } - } - /* set un-assigned controls to zero */ - for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { - if (!(assigned_channels & (1 << i))) - r_rc_values[i] = 0; - } + /* set un-assigned controls to zero */ + for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { + if (!(assigned_channels & (1 << i))) + r_rc_values[i] = 0; + } - /* - * If we got an update with zero channels, treat it as - * a loss of input. - * - * This might happen if a protocol-based receiver returns an update - * that contains no channels that we have mapped. - */ - if (assigned_channels == 0 || rssi == 0) { - rc_input_lost = true; - } else { - /* set RC OK flag */ + /* set RC OK flag, as we got an update */ r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; + + /* if we have enough channels (5) to control the vehicle, the mapping is ok */ + if (assigned_channels > 4) { + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK; + } else { + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK); + } } /* @@ -253,7 +301,7 @@ controls_tick() { * If we haven't seen any new control data in 200ms, assume we * have lost input. */ - if (hrt_elapsed_time(&system_state.rc_channels_timestamp) > 200000) { + if (hrt_elapsed_time(&system_state.rc_channels_timestamp_received) > 200000) { rc_input_lost = true; /* clear the input-kind flags here */ @@ -261,24 +309,32 @@ controls_tick() { PX4IO_P_STATUS_FLAGS_RC_PPM | PX4IO_P_STATUS_FLAGS_RC_DSM | PX4IO_P_STATUS_FLAGS_RC_SBUS); + } /* * Handle losing RC input */ - if (rc_input_lost) { + /* this kicks in if the receiver is gone or the system went to failsafe */ + if (rc_input_lost || (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) { /* Clear the RC input status flag, clear manual override flag */ r_status_flags &= ~( PX4IO_P_STATUS_FLAGS_OVERRIDE | PX4IO_P_STATUS_FLAGS_RC_OK); + /* Mark all channels as invalid, as we just lost the RX */ + r_rc_valid = 0; + /* Set the RC_LOST alarm */ r_status_alarms |= PX4IO_P_STATUS_ALARMS_RC_LOST; + } - /* Mark the arrays as empty */ + /* this kicks in if the receiver is completely gone */ + if (rc_input_lost) { + + /* Set channel count to zero */ r_raw_rc_count = 0; - r_rc_valid = 0; } /* diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index ea9e71c53..f39fcf7ec 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -71,6 +71,7 @@ extern "C" { static bool mixer_servos_armed = false; static bool should_arm = false; static bool should_always_enable_pwm = false; +static volatile bool in_mixer = false; /* selected control values and count for mixing */ enum mixer_source { @@ -95,6 +96,7 @@ static void mixer_set_failsafe(); void mixer_tick(void) { + /* check that we are receiving fresh data from the FMU */ if (hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) { @@ -199,13 +201,17 @@ mixer_tick(void) } - } else if (source != MIX_NONE) { + } else if (source != MIX_NONE && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) { float outputs[PX4IO_SERVO_COUNT]; unsigned mixed; /* mix */ + + /* poor mans mutex */ + in_mixer = true; mixed = mixer_group.mix(&outputs[0], PX4IO_SERVO_COUNT); + in_mixer = false; pwm_limit_calc(should_arm, mixed, r_page_servo_disarmed, r_page_servo_control_min, r_page_servo_control_max, outputs, r_page_servos, &pwm_limit); @@ -308,12 +314,17 @@ mixer_callback(uintptr_t handle, static char mixer_text[256]; /* large enough for one mixer */ static unsigned mixer_text_length = 0; -void +int mixer_handle_text(const void *buffer, size_t length) { /* do not allow a mixer change while safety off */ if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF)) { - return; + return 1; + } + + /* abort if we're in the mixer */ + if (in_mixer) { + return 1; } px4io_mixdata *msg = (px4io_mixdata *)buffer; @@ -321,7 +332,7 @@ mixer_handle_text(const void *buffer, size_t length) isr_debug(2, "mix txt %u", length); if (length < sizeof(px4io_mixdata)) - return; + return 0; unsigned text_length = length - sizeof(px4io_mixdata); @@ -339,13 +350,16 @@ mixer_handle_text(const void *buffer, size_t length) case F2I_MIXER_ACTION_APPEND: isr_debug(2, "append %d", length); + /* disable mixing during the update */ + r_status_flags &= ~PX4IO_P_STATUS_FLAGS_MIXER_OK; + /* check for overflow - this would be really fatal */ if ((mixer_text_length + text_length + 1) > sizeof(mixer_text)) { r_status_flags &= ~PX4IO_P_STATUS_FLAGS_MIXER_OK; - return; + return 0; } - /* append mixer text and nul-terminate */ + /* append mixer text and nul-terminate, guard against overflow */ memcpy(&mixer_text[mixer_text_length], msg->text, text_length); mixer_text_length += text_length; mixer_text[mixer_text_length] = '\0'; @@ -380,6 +394,8 @@ mixer_handle_text(const void *buffer, size_t length) break; } + + return 0; } static void diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index ce8d26cc8..d48c6c529 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -111,7 +111,6 @@ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ #define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ #define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */ -#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 13) /* DSM input is 11 bit data */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */ @@ -128,8 +127,6 @@ #define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */ #define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */ #define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */ -#define PX4IO_P_STATUS_NRSSI 9 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ -#define PX4IO_P_STATUS_RC_DATA 10 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ /* array of post-mix actuator outputs, -10000..10000 */ #define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */ @@ -140,7 +137,17 @@ /* array of raw RC input values, microseconds */ #define PX4IO_PAGE_RAW_RC_INPUT 4 #define PX4IO_P_RAW_RC_COUNT 0 /* number of valid channels */ -#define PX4IO_P_RAW_RC_BASE 1 /* CONFIG_RC_INPUT_COUNT channels from here */ +#define PX4IO_P_RAW_RC_FLAGS 1 /* RC detail status flags */ +#define PX4IO_P_RAW_RC_FLAGS_FRAME_DROP (1 << 0) /* single frame drop */ +#define PX4IO_P_RAW_RC_FLAGS_FAILSAFE (1 << 1) /* receiver is in failsafe mode */ +#define PX4IO_P_RAW_RC_FLAGS_RC_DSM11 (1 << 2) /* DSM decoding is 11 bit mode */ +#define PX4IO_P_RAW_RC_FLAGS_MAPPING_OK (1 << 3) /* Channel mapping is ok */ + +#define PX4IO_P_RAW_RC_NRSSI 2 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ +#define PX4IO_P_RAW_RC_DATA 3 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ +#define PX4IO_P_RAW_FRAME_COUNT 4 /* Number of total received frames (wrapping counter) */ +#define PX4IO_P_RAW_LOST_FRAME_COUNT 5 /* Number of total dropped frames (wrapping counter) */ +#define PX4IO_P_RAW_RC_BASE 6 /* CONFIG_RC_INPUT_COUNT channels from here */ /* array of scaled RC input values, -10000..10000 */ #define PX4IO_PAGE_RC_INPUT 5 @@ -157,6 +164,10 @@ /* setup page */ #define PX4IO_PAGE_SETUP 50 #define PX4IO_P_SETUP_FEATURES 0 +#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /* enable S.Bus v1 output */ +#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /* enable S.Bus v2 output */ +#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /* enable PWM RSSI parsing */ +#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /* enable ADC RSSI parsing */ #define PX4IO_P_SETUP_ARMING 1 /* arming controls */ #define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */ diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index 0b8c4a6a8..d4c25911e 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -196,6 +196,11 @@ user_start(int argc, char *argv[]) POWER_SERVO(true); #endif + /* turn off S.Bus out (if supported) */ +#ifdef ENABLE_SBUS_OUT + ENABLE_SBUS_OUT(false); +#endif + /* start the safety switch handler */ safety_init(); @@ -205,6 +210,9 @@ user_start(int argc, char *argv[]) /* initialise the control inputs */ controls_init(); + /* set up the ADC */ + adc_init(); + /* start the FMU interface */ interface_init(); @@ -223,24 +231,41 @@ user_start(int argc, char *argv[]) /* initialize PWM limit lib */ pwm_limit_init(&pwm_limit); -#if 0 - /* not enough memory, lock down */ - if (minfo.mxordblk < 500) { + /* + * P O L I C E L I G H T S + * + * Not enough memory, lock down. + * + * We might need to allocate mixers later, and this will + * ensure that a developer doing a change will notice + * that he just burned the remaining RAM with static + * allocations. We don't want him to be able to + * get past that point. This needs to be clearly + * documented in the dev guide. + * + */ + if (minfo.mxordblk < 600) { + lowsyslog("ERR: not enough MEM"); bool phase = false; - if (phase) { - LED_AMBER(true); - LED_BLUE(false); - } else { - LED_AMBER(false); - LED_BLUE(true); - } + while (true) { + + if (phase) { + LED_AMBER(true); + LED_BLUE(false); + } else { + LED_AMBER(false); + LED_BLUE(true); + } + up_udelay(250000); - phase = !phase; - usleep(300000); + phase = !phase; + } } -#endif + + /* Start the failsafe led init */ + failsafe_led_init(); /* * Run everything in a tight loop. @@ -270,11 +295,12 @@ user_start(int argc, char *argv[]) check_reboot(); -#if 0 - /* check for debug activity */ + /* check for debug activity (default: none) */ show_debug_messages(); - /* post debug state at ~1Hz */ + /* post debug state at ~1Hz - this is via an auxiliary serial port + * DEFAULTS TO OFF! + */ if (hrt_absolute_time() - last_debug_time > (1000 * 1000)) { struct mallinfo minfo = mallinfo(); @@ -287,7 +313,6 @@ user_start(int argc, char *argv[]) (unsigned)minfo.mxordblk); last_debug_time = hrt_absolute_time(); } -#endif } } diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index a0daa97ea..bb224f388 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -96,8 +96,9 @@ extern uint16_t r_page_servo_disarmed[]; /* PX4IO_PAGE_DISARMED_PWM */ #define r_raw_rc_count r_page_raw_rc_input[PX4IO_P_RAW_RC_COUNT] #define r_raw_rc_values (&r_page_raw_rc_input[PX4IO_P_RAW_RC_BASE]) +#define r_raw_rc_flags r_page_raw_rc_input[PX4IO_P_RAW_RC_FLAGS] #define r_rc_valid r_page_rc_input[PX4IO_P_RC_VALID] -#define r_rc_values (&r_page_rc_input[PX4IO_P_RAW_RC_BASE]) +#define r_rc_values (&r_page_rc_input[PX4IO_P_RC_BASE]) #define r_setup_features r_page_setup[PX4IO_P_SETUP_FEATURES] #define r_setup_arming r_page_setup[PX4IO_P_SETUP_ARMING] @@ -115,7 +116,8 @@ extern uint16_t r_page_servo_disarmed[]; /* PX4IO_PAGE_DISARMED_PWM */ */ struct sys_state_s { - volatile uint64_t rc_channels_timestamp; + volatile uint64_t rc_channels_timestamp_received; + volatile uint64_t rc_channels_timestamp_valid; /** * Last FMU receive time, in microseconds since system boot @@ -160,6 +162,7 @@ extern pwm_limit_t pwm_limit; # define PX4IO_RELAY_CHANNELS 0 # define POWER_SPEKTRUM(_s) stm32_gpiowrite(GPIO_SPEKTRUM_PWR_EN, (_s)) +# define ENABLE_SBUS_OUT(_s) stm32_gpiowrite(GPIO_SBUS_OENABLE, !(_s)) # define VDD_SERVO_FAULT (!stm32_gpioread(GPIO_SERVO_FAULT_DETECT)) @@ -177,12 +180,13 @@ extern pwm_limit_t pwm_limit; * Mixer */ extern void mixer_tick(void); -extern void mixer_handle_text(const void *buffer, size_t length); +extern int mixer_handle_text(const void *buffer, size_t length); /** * Safety switch/LED. */ extern void safety_init(void); +extern void failsafe_led_init(void); /** * FMU communications @@ -213,7 +217,7 @@ extern int dsm_init(const char *device); extern bool dsm_input(uint16_t *values, uint16_t *num_values); extern void dsm_bind(uint16_t cmd, int pulses); extern int sbus_init(const char *device); -extern bool sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); +extern bool sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels); /** global debug level for isr_debug() */ extern volatile uint8_t debug_level; diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 42938b446..1335f52e1 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -90,8 +90,6 @@ uint16_t r_page_status[] = { [PX4IO_P_STATUS_VSERVO] = 0, [PX4IO_P_STATUS_VRSSI] = 0, [PX4IO_P_STATUS_PRSSI] = 0, - [PX4IO_P_STATUS_NRSSI] = 0, - [PX4IO_P_STATUS_RC_DATA] = 0 }; /** @@ -116,6 +114,12 @@ uint16_t r_page_servos[PX4IO_SERVO_COUNT]; uint16_t r_page_raw_rc_input[] = { [PX4IO_P_RAW_RC_COUNT] = 0, + [PX4IO_P_RAW_RC_FLAGS] = 0, + [PX4IO_P_RAW_RC_NRSSI] = 0, + [PX4IO_P_RAW_RC_DATA] = 0, + [PX4IO_P_RAW_FRAME_COUNT] = 0, + [PX4IO_P_RAW_LOST_FRAME_COUNT] = 0, + [PX4IO_P_RAW_RC_DATA] = 0, [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_RC_INPUT_CHANNELS)] = 0 }; @@ -144,7 +148,12 @@ uint16_t r_page_scratch[32]; */ volatile uint16_t r_page_setup[] = { +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + /* default to RSSI ADC functionality */ + [PX4IO_P_SETUP_FEATURES] = PX4IO_P_SETUP_FEATURES_ADC_RSSI, +#else [PX4IO_P_SETUP_FEATURES] = 0, +#endif [PX4IO_P_SETUP_ARMING] = 0, [PX4IO_P_SETUP_PWM_RATES] = 0, [PX4IO_P_SETUP_PWM_DEFAULTRATE] = 50, @@ -162,7 +171,14 @@ volatile uint16_t r_page_setup[] = [PX4IO_P_SETUP_CRC ... (PX4IO_P_SETUP_CRC+1)] = 0, }; -#define PX4IO_P_SETUP_FEATURES_VALID (0) +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 +#define PX4IO_P_SETUP_FEATURES_VALID (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | \ + PX4IO_P_SETUP_FEATURES_SBUS2_OUT | \ + PX4IO_P_SETUP_FEATURES_ADC_RSSI | \ + PX4IO_P_SETUP_FEATURES_PWM_RSSI) +#else +#define PX4IO_P_SETUP_FEATURES_VALID 0 +#endif #define PX4IO_P_SETUP_ARMING_VALID (PX4IO_P_SETUP_ARMING_FMU_ARMED | \ PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK | \ PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK | \ @@ -383,7 +399,10 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num /* handle text going to the mixer parser */ case PX4IO_PAGE_MIXERLOAD: - mixer_handle_text(values, num_values * sizeof(*values)); + if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) || + (r_status_flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED)) { + return mixer_handle_text(values, num_values * sizeof(*values)); + } break; default: @@ -436,9 +455,35 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) case PX4IO_P_SETUP_FEATURES: value &= PX4IO_P_SETUP_FEATURES_VALID; - r_setup_features = value; - /* no implemented feature selection at this point */ + /* some of the options conflict - give S.BUS out precedence, then ADC RSSI, then PWM RSSI */ + + /* switch S.Bus output pin as needed */ + #ifdef ENABLE_SBUS_OUT + ENABLE_SBUS_OUT(value & (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT)); + + /* disable the conflicting options */ + if (value & (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT)) { + value &= ~(PX4IO_P_SETUP_FEATURES_PWM_RSSI | PX4IO_P_SETUP_FEATURES_ADC_RSSI); + } + #endif + + /* disable the conflicting options with ADC RSSI */ + if (value & (PX4IO_P_SETUP_FEATURES_ADC_RSSI)) { + value &= ~(PX4IO_P_SETUP_FEATURES_PWM_RSSI | + PX4IO_P_SETUP_FEATURES_SBUS1_OUT | + PX4IO_P_SETUP_FEATURES_SBUS2_OUT); + } + + /* disable the conflicting options with PWM RSSI (without effect here, but for completeness) */ + if (value & (PX4IO_P_SETUP_FEATURES_PWM_RSSI)) { + value &= ~(PX4IO_P_SETUP_FEATURES_ADC_RSSI | + PX4IO_P_SETUP_FEATURES_SBUS1_OUT | + PX4IO_P_SETUP_FEATURES_SBUS2_OUT); + } + + /* apply changes */ + r_setup_features = value; break; @@ -505,8 +550,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) case PX4IO_P_SETUP_REBOOT_BL: if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) || - (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) || - (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + (r_status_flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED)) { // don't allow reboot while armed break; } @@ -536,8 +580,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) * do not allow a RC config change while outputs armed */ if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) || - (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) || - (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + (r_status_flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED)) { break; } diff --git a/src/modules/px4iofirmware/safety.c b/src/modules/px4iofirmware/safety.c index cdb54a80a..ff2e4af6e 100644 --- a/src/modules/px4iofirmware/safety.c +++ b/src/modules/px4iofirmware/safety.c @@ -45,7 +45,6 @@ #include "px4io.h" static struct hrt_call arming_call; -static struct hrt_call heartbeat_call; static struct hrt_call failsafe_call; /* @@ -84,7 +83,11 @@ safety_init(void) { /* arrange for the button handler to be called at 10Hz */ hrt_call_every(&arming_call, 1000, 100000, safety_check_button, NULL); +} +void +failsafe_led_init(void) +{ /* arrange for the failsafe blinker to be called at 8Hz */ hrt_call_every(&failsafe_call, 1000, 125000, failsafe_blink, NULL); } @@ -165,8 +168,8 @@ failsafe_blink(void *arg) /* indicate that a serious initialisation error occured */ if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)) { LED_AMBER(true); - return; - } + return; + } static bool failsafe = false; diff --git a/src/modules/px4iofirmware/sbus.c b/src/modules/px4iofirmware/sbus.c index 11ccd7356..f6ec542eb 100644 --- a/src/modules/px4iofirmware/sbus.c +++ b/src/modules/px4iofirmware/sbus.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -87,7 +87,7 @@ static unsigned partial_frame_count; unsigned sbus_frame_drops; -static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); +static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels); int sbus_init(const char *device) @@ -118,7 +118,7 @@ sbus_init(const char *device) } bool -sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels) +sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels) { ssize_t ret; hrt_abstime now; @@ -175,7 +175,7 @@ sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_ * decode it. */ partial_frame_count = 0; - return sbus_decode(now, values, num_values, rssi, max_channels); + return sbus_decode(now, values, num_values, sbus_failsafe, sbus_frame_drop, max_channels); } /* @@ -215,14 +215,36 @@ static const struct sbus_bit_pick sbus_decoder[SBUS_INPUT_CHANNELS][3] = { }; static bool -sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_values) +sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_values) { /* check frame boundary markers to avoid out-of-sync cases */ - if ((frame[0] != 0x0f) || (frame[24] != 0x00)) { + if ((frame[0] != 0x0f)) { sbus_frame_drops++; return false; } + switch (frame[24]) { + case 0x00: + /* this is S.BUS 1 */ + break; + case 0x03: + /* S.BUS 2 SLOT0: RX battery and external voltage */ + break; + case 0x83: + /* S.BUS 2 SLOT1 */ + break; + case 0x43: + case 0xC3: + case 0x23: + case 0xA3: + case 0x63: + case 0xE3: + break; + default: + /* we expect one of the bits above, but there are some we don't know yet */ + break; + } + /* we have received something we think is a frame */ last_frame_time = frame_time; @@ -267,20 +289,22 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint /* decode and handle failsafe and frame-lost flags */ if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FAILSAFE_BIT)) { /* failsafe */ /* report that we failed to read anything valid off the receiver */ - *rssi = 0; - return false; + *sbus_failsafe = true; + *sbus_frame_drop = true; } else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ - /* set a special warning flag or try to calculate some kind of RSSI information - to be implemented + /* set a special warning flag * * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this * condition as fail-safe greatly reduces the reliability and range of the radio link, * e.g. by prematurely issueing return-to-launch!!! */ - *rssi = 100; // XXX magic number indicating bad signal, but not a signal loss (yet) + *sbus_failsafe = false; + *sbus_frame_drop = true; + } else { + *sbus_failsafe = false; + *sbus_frame_drop = false; } - *rssi = 255; - return true; } diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index 06b1eddaa..c4fafb5a6 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -85,13 +85,13 @@ #include <systemlib/systemlib.h> #include <systemlib/param/param.h> +#include <version/version.h> #include <mavlink/mavlink_log.h> #include "logbuffer.h" #include "sdlog2_format.h" #include "sdlog2_messages.h" -#include "sdlog2_version.h" #define LOGBUFFER_WRITE_AND_COUNT(_msg) if (logbuffer_write(&lb, &log_msg, LOG_PACKET_SIZE(_msg))) { \ log_msgs_written++; \ @@ -108,13 +108,13 @@ static bool main_thread_should_exit = false; /**< Deamon exit flag */ static bool thread_running = false; /**< Deamon status flag */ static int deamon_task; /**< Handle of deamon task / thread */ static bool logwriter_should_exit = false; /**< Logwriter thread exit flag */ -static const int MAX_NO_LOGFOLDER = 999; /**< Maximum number of log folders */ +static const int MAX_NO_LOGFOLDER = 999; /**< Maximum number of log dirs */ static const int MAX_NO_LOGFILE = 999; /**< Maximum number of log files */ static const int LOG_BUFFER_SIZE_DEFAULT = 8192; static const int MAX_WRITE_CHUNK = 512; static const int MIN_BYTES_TO_WRITE = 512; -static const char *mountpoint = "/fs/microsd"; +static const char *log_root = "/fs/microsd/log"; static int mavlink_fd = -1; struct logbuffer_s lb; @@ -122,14 +122,17 @@ struct logbuffer_s lb; static pthread_mutex_t logbuffer_mutex; static pthread_cond_t logbuffer_cond; -static char folder_path[64]; +static char log_dir[32]; /* statistics counters */ -static unsigned long log_bytes_written = 0; static uint64_t start_time = 0; +static unsigned long log_bytes_written = 0; static unsigned long log_msgs_written = 0; static unsigned long log_msgs_skipped = 0; +/* GPS time, used for log files naming */ +static uint64_t gps_time = 0; + /* current state of logging */ static bool logging_enabled = false; /* enable logging on start (-e option) */ @@ -138,11 +141,14 @@ static bool log_on_start = false; static bool log_when_armed = false; /* delay = 1 / rate (rate defined by -r option) */ static useconds_t sleep_delay = 0; +/* use date/time for naming directories and files (-t option) */ +static bool log_name_timestamp = false; /* helper flag to track system state changes */ static bool flag_system_armed = false; static pthread_t logwriter_pthread = 0; +static pthread_attr_t logwriter_attr; /** * Log buffer writing thread. Open and close file here. @@ -203,14 +209,14 @@ static void handle_command(struct vehicle_command_s *cmd); static void handle_status(struct vehicle_status_s *cmd); /** - * Create folder for current logging session. Store folder name in 'log_folder'. + * Create dir for current logging session. Store dir name in 'log_dir'. */ -static int create_logfolder(void); +static int create_log_dir(void); /** * Select first free log file name and open it. */ -static int open_logfile(void); +static int open_log_file(void); static void sdlog2_usage(const char *reason) @@ -218,11 +224,12 @@ sdlog2_usage(const char *reason) if (reason) fprintf(stderr, "%s\n", reason); - errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a\n" + errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a -t\n" "\t-r\tLog rate in Hz, 0 means unlimited rate\n" "\t-b\tLog buffer size in KiB, default is 8\n" "\t-e\tEnable logging by default (if not, can be started by command)\n" - "\t-a\tLog only when armed (can be still overriden by command)\n"); + "\t-a\tLog only when armed (can be still overriden by command)\n" + "\t-t\tUse date/time for naming log directories and files\n"); } /** @@ -280,82 +287,112 @@ int sdlog2_main(int argc, char *argv[]) exit(1); } -int create_logfolder() +int create_log_dir() { - /* make folder on sdcard */ - uint16_t folder_number = 1; // start with folder sess001 + /* create dir on sdcard if needed */ + uint16_t dir_number = 1; // start with dir sess001 int mkdir_ret; - /* look for the next folder that does not exist */ - while (folder_number <= MAX_NO_LOGFOLDER) { - /* set up folder path: e.g. /fs/microsd/sess001 */ - sprintf(folder_path, "%s/sess%03u", mountpoint, folder_number); - mkdir_ret = mkdir(folder_path, S_IRWXU | S_IRWXG | S_IRWXO); - /* the result is -1 if the folder exists */ + if (log_name_timestamp && gps_time != 0) { + /* use GPS date for log dir naming: e.g. /fs/microsd/2014-01-19 */ + time_t gps_time_sec = gps_time / 1000000; + struct tm t; + gmtime_r(&gps_time_sec, &t); + int n = snprintf(log_dir, sizeof(log_dir), "%s/", log_root); + strftime(log_dir + n, sizeof(log_dir) - n, "%Y-%m-%d", &t); + mkdir_ret = mkdir(log_dir, S_IRWXU | S_IRWXG | S_IRWXO); - if (mkdir_ret == 0) { - /* folder does not exist, success */ - break; + if (mkdir_ret == OK) { + warnx("log dir created: %s", log_dir); + + } else if (errno != EEXIST) { + warn("failed creating new dir: %s", log_dir); + return -1; + } + + } else { + /* look for the next dir that does not exist */ + while (dir_number <= MAX_NO_LOGFOLDER) { + /* format log dir: e.g. /fs/microsd/sess001 */ + sprintf(log_dir, "%s/sess%03u", log_root, dir_number); + mkdir_ret = mkdir(log_dir, S_IRWXU | S_IRWXG | S_IRWXO); - } else if (mkdir_ret == -1) { - /* folder exists already */ - folder_number++; + if (mkdir_ret == 0) { + warnx("log dir created: %s", log_dir); + break; + + } else if (errno != EEXIST) { + warn("failed creating new dir: %s", log_dir); + return -1; + } + + /* dir exists already */ + dir_number++; continue; + } - } else { - warn("failed creating new folder"); + if (dir_number >= MAX_NO_LOGFOLDER) { + /* we should not end up here, either we have more than MAX_NO_LOGFOLDER on the SD card, or another problem */ + warnx("all %d possible dirs exist already", MAX_NO_LOGFOLDER); return -1; } } - if (folder_number >= MAX_NO_LOGFOLDER) { - /* we should not end up here, either we have more than MAX_NO_LOGFOLDER on the SD card, or another problem */ - warnx("all %d possible folders exist already.", MAX_NO_LOGFOLDER); - return -1; - } - + /* print logging path, important to find log file later */ + warnx("log dir: %s", log_dir); + mavlink_log_info(mavlink_fd, "[sdlog2] log dir: %s", log_dir); return 0; } -int open_logfile() +int open_log_file() { - /* make folder on sdcard */ - uint16_t file_number = 1; // start with file log001 - /* string to hold the path to the log */ - char path_buf[64] = ""; - - int fd = 0; - - /* look for the next file that does not exist */ - while (file_number <= MAX_NO_LOGFILE) { - /* set up file path: e.g. /fs/microsd/sess001/log001.bin */ - sprintf(path_buf, "%s/log%03u.bin", folder_path, file_number); + char log_file_name[16] = ""; + char log_file_path[48] = ""; + + if (log_name_timestamp && gps_time != 0) { + /* use GPS time for log file naming, e.g. /fs/microsd/2014-01-19/19_37_52.bin */ + time_t gps_time_sec = gps_time / 1000000; + struct tm t; + gmtime_r(&gps_time_sec, &t); + strftime(log_file_name, sizeof(log_file_name), "%H_%M_%S.bin", &t); + snprintf(log_file_path, sizeof(log_file_path), "%s/%s", log_dir, log_file_name); + + } else { + uint16_t file_number = 1; // start with file log001 + + /* look for the next file that does not exist */ + while (file_number <= MAX_NO_LOGFILE) { + /* format log file path: e.g. /fs/microsd/sess001/log001.bin */ + snprintf(log_file_name, sizeof(log_file_name), "log%03u.bin", file_number); + snprintf(log_file_path, sizeof(log_file_path), "%s/%s", log_dir, log_file_name); + + if (!file_exist(log_file_path)) { + break; + } - if (file_exist(path_buf)) { file_number++; - continue; } - fd = open(path_buf, O_CREAT | O_WRONLY | O_DSYNC); - - if (fd == 0) { - warn("opening %s failed", path_buf); + if (file_number > MAX_NO_LOGFILE) { + /* we should not end up here, either we have more than MAX_NO_LOGFILE on the SD card, or another problem */ + warnx("all %d possible files exist already", MAX_NO_LOGFILE); + return -1; } + } - warnx("logging to: %s.", path_buf); - mavlink_log_info(mavlink_fd, "[sdlog2] log: %s", path_buf); + int fd = open(log_file_path, O_CREAT | O_WRONLY | O_DSYNC); - return fd; - } + if (fd < 0) { + warn("failed opening log: %s", log_file_name); + mavlink_log_info(mavlink_fd, "[sdlog2] failed opening log: %s", log_file_name); - if (file_number > MAX_NO_LOGFILE) { - /* we should not end up here, either we have more than MAX_NO_LOGFILE on the SD card, or another problem */ - warnx("all %d possible files exist already.", MAX_NO_LOGFILE); - return -1; + } else { + warnx("log file: %s", log_file_name); + mavlink_log_info(mavlink_fd, "[sdlog2] log file: %s", log_file_name); } - return 0; + return fd; } static void *logwriter_thread(void *arg) @@ -363,9 +400,12 @@ static void *logwriter_thread(void *arg) /* set name */ prctl(PR_SET_NAME, "sdlog2_writer", 0); - struct logbuffer_s *logbuf = (struct logbuffer_s *)arg; + int log_fd = open_log_file(); - int log_fd = open_logfile(); + if (log_fd < 0) + return; + + struct logbuffer_s *logbuf = (struct logbuffer_s *)arg; /* write log messages formats, version and parameters */ log_bytes_written += write_formats(log_fd); @@ -443,14 +483,20 @@ static void *logwriter_thread(void *arg) fsync(log_fd); close(log_fd); - return OK; + return; } void sdlog2_start_log() { - warnx("start logging."); + warnx("start logging"); mavlink_log_info(mavlink_fd, "[sdlog2] start logging"); + /* create log dir if needed */ + if (create_log_dir() != 0) { + mavlink_log_critical(mavlink_fd, "[sdlog2] error creating log dir"); + errx(1, "error creating log dir"); + } + /* initialize statistics counter */ log_bytes_written = 0; start_time = hrt_absolute_time(); @@ -458,30 +504,28 @@ void sdlog2_start_log() log_msgs_skipped = 0; /* initialize log buffer emptying thread */ - pthread_attr_t receiveloop_attr; - pthread_attr_init(&receiveloop_attr); + pthread_attr_init(&logwriter_attr); struct sched_param param; /* low priority, as this is expensive disk I/O */ param.sched_priority = SCHED_PRIORITY_DEFAULT - 40; - (void)pthread_attr_setschedparam(&receiveloop_attr, ¶m); + (void)pthread_attr_setschedparam(&logwriter_attr, ¶m); - pthread_attr_setstacksize(&receiveloop_attr, 2048); + pthread_attr_setstacksize(&logwriter_attr, 2048); logwriter_should_exit = false; /* start log buffer emptying thread */ - if (0 != pthread_create(&logwriter_pthread, &receiveloop_attr, logwriter_thread, &lb)) { + if (0 != pthread_create(&logwriter_pthread, &logwriter_attr, logwriter_thread, &lb)) { errx(1, "error creating logwriter thread"); } logging_enabled = true; - // XXX we have to destroy the attr at some point } void sdlog2_stop_log() { - warnx("stop logging."); + warnx("stop logging"); mavlink_log_info(mavlink_fd, "[sdlog2] stop logging"); logging_enabled = false; @@ -501,6 +545,7 @@ void sdlog2_stop_log() } logwriter_pthread = 0; + pthread_attr_destroy(&logwriter_attr); sdlog2_status(); } @@ -569,8 +614,8 @@ int write_parameters(int fd) } case PARAM_TYPE_FLOAT: - param_get(param, &value); - break; + param_get(param, &value); + break; default: break; @@ -588,18 +633,25 @@ int sdlog2_thread_main(int argc, char *argv[]) mavlink_fd = open(MAVLINK_LOG_DEVICE, 0); if (mavlink_fd < 0) { - warnx("failed to open MAVLink log stream, start mavlink app first."); + warnx("failed to open MAVLink log stream, start mavlink app first"); } /* log buffer size */ int log_buffer_size = LOG_BUFFER_SIZE_DEFAULT; + logging_enabled = false; + log_on_start = false; + log_when_armed = false; + log_name_timestamp = false; + + flag_system_armed = false; + /* work around some stupidity in task_create's argv handling */ argc -= 2; argv += 2; int ch; - while ((ch = getopt(argc, argv, "r:b:ea")) != EOF) { + while ((ch = getopt(argc, argv, "r:b:eat")) != EOF) { switch (ch) { case 'r': { unsigned long r = strtoul(optarg, NULL, 10); @@ -632,49 +684,52 @@ int sdlog2_thread_main(int argc, char *argv[]) log_when_armed = true; break; + case 't': + log_name_timestamp = true; + break; + case '?': if (optopt == 'c') { - warnx("Option -%c requires an argument.", optopt); + warnx("option -%c requires an argument", optopt); } else if (isprint(optopt)) { - warnx("Unknown option `-%c'.", optopt); + warnx("unknown option `-%c'", optopt); } else { - warnx("Unknown option character `\\x%x'.", optopt); + warnx("unknown option character `\\x%x'", optopt); } default: sdlog2_usage("unrecognized flag"); - errx(1, "exiting."); + errx(1, "exiting"); } } - if (!file_exist(mountpoint)) { - errx(1, "logging mount point %s not present, exiting.", mountpoint); - } + gps_time = 0; + + /* create log root dir */ + int mkdir_ret = mkdir(log_root, S_IRWXU | S_IRWXG | S_IRWXO); - if (create_logfolder()) { - errx(1, "unable to create logging folder, exiting."); + if (mkdir_ret != 0 && errno != EEXIST) { + err("failed creating log root dir: %s", log_root); } + /* copy conversion scripts */ const char *converter_in = "/etc/logging/conv.zip"; - char *converter_out = malloc(120); - sprintf(converter_out, "%s/conv.zip", folder_path); + char *converter_out = malloc(64); + snprintf(converter_out, 64, "%s/conv.zip", log_root); - if (file_copy(converter_in, converter_out)) { - errx(1, "unable to copy conversion scripts, exiting."); + if (file_copy(converter_in, converter_out) != OK) { + warn("unable to copy conversion scripts"); } free(converter_out); - /* only print logging path, important to find log file later */ - warnx("logging to directory: %s", folder_path); - /* initialize log buffer with specified size */ - warnx("log buffer size: %i bytes.", log_buffer_size); + warnx("log buffer size: %i bytes", log_buffer_size); if (OK != logbuffer_init(&lb, log_buffer_size)) { - errx(1, "can't allocate log buffer, exiting."); + errx(1, "can't allocate log buffer, exiting"); } struct vehicle_status_s buf_status; @@ -895,7 +950,7 @@ int sdlog2_thread_main(int argc, char *argv[]) * differs from the number of messages in the above list. */ if (fdsc_count > fdsc) { - warn("WARNING: Not enough space for poll fds allocated. Check %s:%d.", __FILE__, __LINE__); + warn("WARNING: Not enough space for poll fds allocated. Check %s:%d", __FILE__, __LINE__); fdsc_count = fdsc; } @@ -919,19 +974,27 @@ int sdlog2_thread_main(int argc, char *argv[]) uint16_t differential_pressure_counter = 0; /* enable logging on start if needed */ - if (log_on_start) + if (log_on_start) { + /* check GPS topic to get GPS time */ + if (log_name_timestamp) { + if (OK == orb_copy(ORB_ID(vehicle_gps_position), subs.gps_pos_sub, &buf.gps_pos)) { + gps_time = buf.gps_pos.time_gps_usec; + } + } + sdlog2_start_log(); + } while (!main_thread_should_exit) { /* decide use usleep() or blocking poll() */ bool use_sleep = sleep_delay > 0 && logging_enabled; /* poll all topics if logging enabled or only management (first 2) if not */ - int poll_ret = poll(fds, logging_enabled ? fdsc_count : 2, use_sleep ? 0 : poll_timeout); + int poll_ret = poll(fds, logging_enabled ? fdsc_count : 3, use_sleep ? 0 : poll_timeout); /* handle the poll result */ if (poll_ret < 0) { - warnx("ERROR: poll error, stop logging."); + warnx("ERROR: poll error, stop logging"); main_thread_should_exit = true; } else if (poll_ret > 0) { @@ -960,6 +1023,17 @@ int sdlog2_thread_main(int argc, char *argv[]) handled_topics++; } + /* --- GPS POSITION - LOG MANAGEMENT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_gps_position), subs.gps_pos_sub, &buf.gps_pos); + + if (log_name_timestamp) { + gps_time = buf.gps_pos.time_gps_usec; + } + + handled_topics++; + } + if (!logging_enabled || !check_data || handled_topics >= poll_ret) { continue; } @@ -988,7 +1062,7 @@ int sdlog2_thread_main(int argc, char *argv[]) /* --- GPS POSITION --- */ if (fds[ifds++].revents & POLLIN) { - orb_copy(ORB_ID(vehicle_gps_position), subs.gps_pos_sub, &buf.gps_pos); + // Don't orb_copy, it's already done few lines above log_msg.msg_type = LOG_GPS_MSG; log_msg.body.log_GPS.gps_time = buf.gps_pos.time_gps_usec; log_msg.body.log_GPS.fix_type = buf.gps_pos.fix_type; @@ -1279,7 +1353,7 @@ int sdlog2_thread_main(int argc, char *argv[]) free(lb.data); - warnx("exiting."); + warnx("exiting"); thread_running = false; @@ -1292,8 +1366,8 @@ void sdlog2_status() float mebibytes = kibibytes / 1024.0f; float seconds = ((float)(hrt_absolute_time() - start_time)) / 1000000.0f; - warnx("wrote %lu msgs, %4.2f MiB (average %5.3f KiB/s), skipped %lu msgs.", log_msgs_written, (double)mebibytes, (double)(kibibytes / seconds), log_msgs_skipped); - mavlink_log_info(mavlink_fd, "[sdlog2] wrote %lu msgs, skipped %lu msgs.", log_msgs_written, log_msgs_skipped); + warnx("wrote %lu msgs, %4.2f MiB (average %5.3f KiB/s), skipped %lu msgs", log_msgs_written, (double)mebibytes, (double)(kibibytes / seconds), log_msgs_skipped); + mavlink_log_info(mavlink_fd, "[sdlog2] wrote %lu msgs, skipped %lu msgs", log_msgs_written, log_msgs_skipped); } /** @@ -1312,7 +1386,7 @@ int file_copy(const char *file_old, const char *file_new) int ret = 0; if (source == NULL) { - warnx("failed opening input file to copy."); + warnx("failed opening input file to copy"); return 1; } @@ -1320,7 +1394,7 @@ int file_copy(const char *file_old, const char *file_new) if (target == NULL) { fclose(source); - warnx("failed to open output file to copy."); + warnx("failed to open output file to copy"); return 1; } @@ -1331,7 +1405,7 @@ int file_copy(const char *file_old, const char *file_new) ret = fwrite(buf, 1, nread, target); if (ret <= 0) { - warnx("error writing file."); + warnx("error writing file"); ret = 1; break; } diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index bbc84ef93..30659fd3a 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -381,14 +381,73 @@ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.00459340659f); #endif PARAM_DEFINE_FLOAT(BAT_C_SCALING, 0.0124); /* scaling for 3DR power brick */ +/** + * Roll control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading roll inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_ROLL, 1); + +/** + * Pitch control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading pitch inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_PITCH, 2); + +/** + * Throttle control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading throttle inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_THROTTLE, 3); + +/** + * Yaw control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading yaw inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_YAW, 4); -PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 5); +/** + * Mode switch channel mapping. + * + * This is the main flight mode selector. + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for deciding about the main mode. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 0); PARAM_DEFINE_INT32(RC_MAP_RETURN_SW, 0); -PARAM_DEFINE_INT32(RC_MAP_ASSIST_SW, 6); +PARAM_DEFINE_INT32(RC_MAP_ASSIST_SW, 0); PARAM_DEFINE_INT32(RC_MAP_MISSIO_SW, 0); //PARAM_DEFINE_INT32(RC_MAP_OFFB_SW, 0); diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index ff6c5882e..df6cbb7b2 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -797,7 +797,6 @@ Sensors::accel_init() #endif - warnx("using system accel"); close(fd); } } @@ -837,7 +836,6 @@ Sensors::gyro_init() #endif - warnx("using system gyro"); close(fd); } } @@ -1278,6 +1276,9 @@ Sensors::rc_poll() orb_copy(ORB_ID(input_rc), _rc_sub, &rc_input); + if (rc_input.rc_lost) + return; + struct manual_control_setpoint_s manual_control; struct actuator_controls_s actuator_group_3; @@ -1322,7 +1323,7 @@ Sensors::rc_poll() channel_limit = _rc_max_chan_count; /* we are accepting this message */ - _rc_last_valid = rc_input.timestamp; + _rc_last_valid = rc_input.timestamp_last_signal; /* Read out values from raw message */ for (unsigned int i = 0; i < channel_limit; i++) { @@ -1371,9 +1372,9 @@ Sensors::rc_poll() } _rc.chan_count = rc_input.channel_count; - _rc.timestamp = rc_input.timestamp; + _rc.timestamp = rc_input.timestamp_last_signal; - manual_control.timestamp = rc_input.timestamp; + manual_control.timestamp = rc_input.timestamp_last_signal; /* roll input - rolling right is stick-wise and rotation-wise positive */ manual_control.roll = limit_minus_one_to_one(_rc.chan[_rc.function[ROLL]].scaled); @@ -1507,9 +1508,6 @@ void Sensors::task_main() { - /* inform about start */ - warnx("Initializing.."); - /* start individual sensors */ accel_init(); gyro_init(); @@ -1548,8 +1546,8 @@ Sensors::task_main() raw.adc_voltage_v[3] = 0.0f; memset(&_battery_status, 0, sizeof(_battery_status)); - _battery_status.voltage_v = 0.0f; - _battery_status.voltage_filtered_v = 0.0f; + _battery_status.voltage_v = -1.0f; + _battery_status.voltage_filtered_v = -1.0f; _battery_status.current_a = -1.0f; _battery_status.discharged_mah = -1.0f; diff --git a/src/systemcmds/hw_ver/hw_ver.c b/src/systemcmds/hw_ver/hw_ver.c new file mode 100644 index 000000000..4b84523cc --- /dev/null +++ b/src/systemcmds/hw_ver/hw_ver.c @@ -0,0 +1,73 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file hw_ver.c + * + * Show and test hardware version. + */ + +#include <nuttx/config.h> + +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <version/version.h> + +__EXPORT int hw_ver_main(int argc, char *argv[]); + +int +hw_ver_main(int argc, char *argv[]) +{ + if (argc >= 2) { + if (!strcmp(argv[1], "show")) { + printf(HW_ARCH "\n"); + exit(0); + } + + if (!strcmp(argv[1], "compare")) { + if (argc >= 3) { + int ret = strcmp(HW_ARCH, argv[2]) != 0; + if (ret == 0) { + printf("hw_ver match: %s\n", HW_ARCH); + } + exit(ret); + + } else { + errx(1, "not enough arguments, try 'compare PX4FMU_1'"); + } + } + } + + errx(1, "expected a command, try 'show' or 'compare'"); +} diff --git a/src/systemcmds/hw_ver/module.mk b/src/systemcmds/hw_ver/module.mk new file mode 100644 index 000000000..3cc08b6a1 --- /dev/null +++ b/src/systemcmds/hw_ver/module.mk @@ -0,0 +1,43 @@ +############################################################################ +# +# Copyright (c) 2014 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Show and test hardware version +# + +MODULE_COMMAND = hw_ver +SRCS = hw_ver.c + +MODULE_STACKSIZE = 1024 + +MAXOPTIMIZATION = -Os diff --git a/src/systemcmds/tests/test_mtd.c b/src/systemcmds/tests/test_mtd.c index 8a626b65c..bac9efbdb 100644 --- a/src/systemcmds/tests/test_mtd.c +++ b/src/systemcmds/tests/test_mtd.c @@ -90,6 +90,16 @@ int check_user_abort(int fd) { return 1; } +void print_fail() +{ + printf("<[T]: MTD: FAIL>\n"); +} + +void print_success() +{ + printf("<[T]: MTD: OK>\n"); +} + int test_mtd(int argc, char *argv[]) { @@ -99,6 +109,7 @@ test_mtd(int argc, char *argv[]) struct stat buffer; if (stat(PARAM_FILE_NAME, &buffer)) { warnx("file %s not found, aborting MTD test", PARAM_FILE_NAME); + print_fail(); return 1; } @@ -123,9 +134,17 @@ test_mtd(int argc, char *argv[]) uint8_t read_buf[chunk_sizes[c]] __attribute__((aligned(64))); hrt_abstime start, end; - int fd = open(PARAM_FILE_NAME, O_WRONLY); + int fd = open(PARAM_FILE_NAME, O_RDONLY); + int rret = read(fd, read_buf, chunk_sizes[c]); + close(fd); - warnx("testing unaligned writes - please wait.."); + fd = open(PARAM_FILE_NAME, O_WRONLY); + + printf("printing 2 percent of the first chunk:\n"); + for (int i = 0; i < sizeof(read_buf) / 50; i++) { + printf("%02X", read_buf[i]); + } + printf("\n"); iterations = file_size / chunk_sizes[c]; @@ -133,9 +152,9 @@ test_mtd(int argc, char *argv[]) for (unsigned i = 0; i < iterations; i++) { int wret = write(fd, write_buf, chunk_sizes[c]); - if (wret != chunk_sizes[c]) { + if (wret != (int)chunk_sizes[c]) { warn("WRITE ERROR!"); - + print_fail(); return 1; } @@ -156,6 +175,7 @@ test_mtd(int argc, char *argv[]) if (rret != chunk_sizes[c]) { warnx("READ ERROR!"); + print_fail(); return 1; } @@ -165,6 +185,7 @@ test_mtd(int argc, char *argv[]) for (int j = 0; j < chunk_sizes[c]; j++) { if (read_buf[j] != write_buf[j]) { warnx("COMPARISON ERROR: byte %d", j); + print_fail(); compare_ok = false; break; } @@ -172,6 +193,7 @@ test_mtd(int argc, char *argv[]) if (!compare_ok) { warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + print_fail(); return 1; } @@ -183,7 +205,6 @@ test_mtd(int argc, char *argv[]) close(fd); - printf("RESULT: OK! No readback errors.\n\n"); } /* fill the file with 0xFF to make it look new again */ @@ -193,14 +214,16 @@ test_mtd(int argc, char *argv[]) for (int i = 0; i < file_size / sizeof(ffbuf); i++) { int ret = write(fd, ffbuf, sizeof(ffbuf)); - if (ret) { + if (ret != sizeof(ffbuf)) { warnx("ERROR! Could not fill file with 0xFF"); close(fd); + print_fail(); return 1; } } (void)close(fd); + print_success(); return 0; } diff --git a/src/systemcmds/tests/test_rc.c b/src/systemcmds/tests/test_rc.c index 6a602ecfc..57c0e7f4c 100644 --- a/src/systemcmds/tests/test_rc.c +++ b/src/systemcmds/tests/test_rc.c @@ -121,7 +121,7 @@ int test_rc(int argc, char *argv[]) return ERROR; } - if (hrt_absolute_time() - rc_input.timestamp > 100000) { + if (hrt_absolute_time() - rc_input.timestamp_last_signal > 100000) { warnx("TIMEOUT, less than 10 Hz updates"); (void)close(_rc_sub); return ERROR; diff --git a/src/systemcmds/tests/tests.h b/src/systemcmds/tests/tests.h index 223edc14a..82de05dff 100644 --- a/src/systemcmds/tests/tests.h +++ b/src/systemcmds/tests/tests.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions |