diff options
| author | Lorenz Meier <lm@inf.ethz.ch> | 2013-12-28 22:18:07 +0100 |
|---|---|---|
| committer | Lorenz Meier <lm@inf.ethz.ch> | 2013-12-28 22:18:07 +0100 |
| commit | 501c5ff49f2ba05d21cfe10775c1ebc3bc6af2c9 (patch) | |
| tree | 3f7802b940d831ca05c0143ea5ec3a8e8ac1cabf /ROMFS/px4fmu_common/init.d/4008_ardrone | |
| parent | d7a3aaba45518e04e362101a0e81e55462421375 (diff) | |
| download | px4-firmware-501c5ff49f2ba05d21cfe10775c1ebc3bc6af2c9.tar.gz px4-firmware-501c5ff49f2ba05d21cfe10775c1ebc3bc6af2c9.tar.bz2 px4-firmware-501c5ff49f2ba05d21cfe10775c1ebc3bc6af2c9.zip | |
Cleaned up startup, should be completely compatible, but allows clean QGC indices
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/4008_ardrone')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/4008_ardrone | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/ROMFS/px4fmu_common/init.d/4008_ardrone b/ROMFS/px4fmu_common/init.d/4008_ardrone new file mode 100644 index 000000000..f6f09ac22 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4008_ardrone @@ -0,0 +1,57 @@ +#!nsh + +echo "[init] 08_ardrone: PX4FMU on PX4IOAR carrier board" + +# +# Load default params for this platform +# +if param compare SYS_AUTOCONFIG 1 +then + # Set all params here, then disable autoconfig + param set MC_ATTRATE_D 0 + param set MC_ATTRATE_I 0 + param set MC_ATTRATE_P 0.13 + param set MC_ATT_D 0 + param set MC_ATT_I 0.3 + param set MC_ATT_P 5 + param set MC_YAWPOS_D 0.1 + param set MC_YAWPOS_I 0.15 + param set MC_YAWPOS_P 1 + param set MC_YAWRATE_D 0 + param set MC_YAWRATE_I 0 + param set MC_YAWRATE_P 0.15 + + param set SYS_AUTOCONFIG 0 + param save +fi + +# +# Force some key parameters to sane values +# MAV_TYPE 2 = quadrotor +# +param set MAV_TYPE 2 +param set BAT_V_SCALING 0.008381 + +# +# Start MAVLink +# +mavlink start -d /dev/ttyS0 -b 57600 +usleep 5000 + +# +# Configure PX4FMU for operation with PX4IOAR +# +fmu mode_gpio_serial + +# +# Fire up the AR.Drone interface. +# +ardrone_interface start -d /dev/ttyS1 + +# +# Start common for all multirotors apps +# +sh /etc/init.d/rc.multirotor + +# Exit, because /dev/ttyS0 is needed for MAVLink +exit |