diff options
| author | Anton Matosov <anton.matosov@gmail.com> | 2015-01-07 00:25:06 +0200 |
|---|---|---|
| committer | Anton Matosov <anton.matosov@gmail.com> | 2015-01-08 00:53:52 +0200 |
| commit | 08062e6546f02cb2e819f690d35b485425788cc4 (patch) | |
| tree | 34707300cb69fc63bb89bdc31e3feabad08a84d1 /ROMFS/px4fmu_common/mixers/CCPM.main.mix | |
| parent | 74b63d08e1f2dd34b2c18be9d46d0837a9be5b9f (diff) | |
| download | px4-firmware-08062e6546f02cb2e819f690d35b485425788cc4.tar.gz px4-firmware-08062e6546f02cb2e819f690d35b485425788cc4.tar.bz2 px4-firmware-08062e6546f02cb2e819f690d35b485425788cc4.zip | |
Changed naming of the mixers to get rid of umbiguity as outputs are actually going to be driven by io, not fmu
Implemented automatic lookup for the .aux.mix file if it exists
Diffstat (limited to 'ROMFS/px4fmu_common/mixers/CCPM.main.mix')
| -rw-r--r-- | ROMFS/px4fmu_common/mixers/CCPM.main.mix | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/ROMFS/px4fmu_common/mixers/CCPM.main.mix b/ROMFS/px4fmu_common/mixers/CCPM.main.mix new file mode 100644 index 000000000..1c45b3e59 --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/CCPM.main.mix @@ -0,0 +1,53 @@ +Helicopter 120 degree Cyclic-Collective-Pitch Mixing (CCPM) for PX4FMU +================================================== + + +Output 0 - Rear Servo Mixer +---------------- + +Rear Servo = Collective (Thrust - 3) + Elevator (Pitch - 1) + +M: 2 +O: 10000 10000 0 -10000 10000 +S: 0 3 10000 10000 0 -10000 10000 +S: 0 1 10000 10000 0 -10000 10000 + + +Output 1 - Left Servo Mixer +----------------- +Left Servo = Collective (Thurst - 3) - 0.5 * Elevator (Pitch - 1) + 0.866 * Aileron (Roll - 0) + +M: 3 +O: 10000 10000 0 -10000 10000 +S: 0 3 -10000 -10000 0 -10000 10000 +S: 0 1 -5000 -5000 0 -10000 10000 +S: 0 0 8660 8660 0 -10000 10000 + + +Output 2 - Right Servo Mixer +---------------- +Right Servo = Collective (Thurst - 3) - 0.5 * Elevator (Pitch - 1) - 0.866 * Aileron (Roll - 0) + + +M: 3 +O: 10000 10000 0 -10000 10000 +S: 0 3 -10000 -10000 0 -10000 10000 +S: 0 1 -5000 -5000 0 -10000 10000 +S: 0 0 -8660 -8660 0 -10000 10000 + +Output 3 - Tail Servo Mixer +---------------- +Tail Servo = Yaw (control index = 2) + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 2 10000 10000 0 -10000 10000 + + +Output 4 - Motor speed mixer +----------------- +This would be the motor speed control output from governor power demand- not sure what index to use here? + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 4 0 20000 -10000 -10000 10000 |